Convert Nokia6610GE12 driver to new format.

1 files changed, 0 insertions, 126 deletions

diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h
deleted file mode 100644
index d3594434..00000000
--- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h
- * @brief   GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-/*
- * Set various display properties. These properties mostly depend on the exact controller chip you get.
- * The defaults should work for most controllers.
- */
-//#define GDISP_SCREEN_HEIGHT				130		// The visible display height
-//#define GDISP_SCREEN_WIDTH				130		// The visible display width
-//#define GDISP_RAM_X_OFFSET				0		// The x offset of the visible area
-//#define GDISP_RAM_Y_OFFSET				2		// The y offset of the visible area
-//#define GDISP_SLEEP_POS					50		// The position of the sleep mode partial display
-//#define GDISP_INITIAL_CONTRAST			50		// The initial contrast percentage
-//#define GDISP_INITIAL_BACKLIGHT			100		// The initial backlight percentage
-
-/**
- * @brief   Initialise the board for the display.
- * @notes	Performs the following functions:
- *			1. initialise the spi port used by your display
- *			2. initialise the reset pin (initial state not-in-reset)
- *			3. initialise the chip select pin (initial state not-active)
- *			4. initialise the backlight pin (initial state back-light off)
- *
- * @notapi
- */
-static inline void init_board(void) {
-
-}
-
-/**
- * @brief   Set or clear the lcd reset pin.
- *
- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
- * 
- * @notapi
- */
-static inline void setpin_reset(bool_t state) {
-
-}
-
-/**
- * @brief   Set the lcd back-light level.
- * @note	For now 0% turns the backlight off, anything else the backlight is on.
- *			While the hardware supports PWM backlight control, we are not using it
- *			yet.
- *
- * @param[in] percent		0 to 100%
- * 
- * @notapi
- */
-static inline void set_backlight(uint8_t percent) {
-
-}
-
-/**
- * @brief   Take exclusive control of the bus
- *
- * @notapi
- */
-static inline void acquire_bus(void) {
-
-}
-
-/**
- * @brief   Release exclusive control of the bus
- *
- * @notapi
- */
-static inline void release_bus(void) {
-
-}
-
-/**
- * @brief   Send an 8 bit command to the lcd.
- *
- * @param[in] cmd		The command to send
- *
- * @notapi
- */
-static inline void write_cmd(uint16_t cmd) {
-
-}
-
-/**
- * @brief   Send an 8 bit data to the lcd.
- *
- * @param[in] data		The data to send
- * 
- * @notapi
- */
-static inline void write_data(uint16_t data) {
-
-}
-
-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL
-/**
- * @brief   Read data from the lcd.
- *
- * @return	The data from the lcd
- * @note	The chip select may need to be asserted/de-asserted
- * 			around the actual spi read
- * 
- * @notapi
- */
-static inline uint16_t read_data(void) {
-
-}
-#endif
-
-#endif /* _GDISP_LLD_BOARD_H */
-/** @} */