diff options
| author | Joel Bodenmann <joel.bodenmann@hevs.ch> | 2012-10-22 17:48:40 +0200 |
|---|---|---|
| committer | Joel Bodenmann <joel.bodenmann@hevs.ch> | 2012-10-22 17:48:40 +0200 |
| commit | 5f4ff227075c68c0c888e51c223a889e132cdd11 (patch) | |
| tree | 7351be3c3a4265b8337a7b23a19208bffeaca008 /drivers/gdisp/SSD1289 | |
| parent | 8b29fb3064c0f9bc5d8ee69a0dd1ae7fc6e71b29 (diff) | |
| download | uGFX-5f4ff227075c68c0c888e51c223a889e132cdd11.tar.gz uGFX-5f4ff227075c68c0c888e51c223a889e132cdd11.tar.bz2 uGFX-5f4ff227075c68c0c888e51c223a889e132cdd11.zip | |
SSD1289 FSMC fix - thanks to Mobyfab
Diffstat (limited to 'drivers/gdisp/SSD1289')
| -rw-r--r-- | drivers/gdisp/SSD1289/gdisp_lld.c | 62 |
1 files changed, 40 insertions, 22 deletions
diff --git a/drivers/gdisp/SSD1289/gdisp_lld.c b/drivers/gdisp/SSD1289/gdisp_lld.c index 8de583fb..321923e0 100644 --- a/drivers/gdisp/SSD1289/gdisp_lld.c +++ b/drivers/gdisp/SSD1289/gdisp_lld.c @@ -57,31 +57,49 @@ * @notapi
*/
bool_t GDISP_LLD(init)(void) {
- #ifdef GDISP_USE_FSMC
- #if defined(STM32F1XX) || defined(STM32F3XX)
- /* FSMC clock init for F1/F3 */
- rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
- #elif defined(STM32F4XX) || defined(STM32F2XX)
- /* FSMC clock init for F2/F4 */
- rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0);
- #endif
+#if defined(GDISP_USE_FSMC)
+
+ #if defined(STM32F1XX) || defined(STM32F3XX)
+ /* FSMC setup for F1/F3 */
+ rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
- int FSMC_Bank = 0;
- /* timing structure */
- /* from datasheet:
- address setup: 0ns
- address hold: 0ns
- Data setup: 5ns
- Data hold: 5ns
- Data access: 250ns
- output hold: 100ns
- */
- FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_1 | FSMC_BTR1_DATAST_1;
-
- /* Bank1 NOR/SRAM control register configuration */
- FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
+ #if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
+ #error "DMA not implemented for F1/F3 Devices"
+ #endif
+ #elif defined(STM32F4XX) || defined(STM32F2XX)
+ /* STM32F2-F4 FSMC init */
+ rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0);
+
+ #if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
+ if (dmaStreamAllocate(GDISP_DMA_STREAM, 0, NULL, NULL)) chSysHalt();
+ dmaStreamSetMemory0(GDISP_DMA_STREAM, &GDISP_RAM);
+ dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
+ #endif
+ #else
+ #error "FSMC not implemented for this device"
#endif
+ /* set pins to FSMC mode */
+ IOBus busD = {GPIOD, (1 << 0) | (1 << 1) | (1 << 4) | (1 << 5) | (1 << 7) | (1 << 8) |
+ (1 << 9) | (1 << 10) | (1 << 11) | (1 << 14) | (1 << 15), 0};
+
+ IOBus busE = {GPIOE, (1 << 7) | (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) |
+ (1 << 13) | (1 << 14) | (1 << 15), 0};
+
+ palSetBusMode(&busD, PAL_MODE_ALTERNATE(12));
+ palSetBusMode(&busE, PAL_MODE_ALTERNATE(12));
+
+ const unsigned char FSMC_Bank = 0;
+ /* FSMC timing */
+ FSMC_Bank1->BTCR[FSMC_Bank+1] = (FSMC_BTR1_ADDSET_1 | FSMC_BTR1_ADDSET_3) \
+ | (FSMC_BTR1_DATAST_1 | FSMC_BTR1_DATAST_3) \
+ | (FSMC_BTR1_BUSTURN_1 | FSMC_BTR1_BUSTURN_3) ;
+
+ /* Bank1 NOR/SRAM control register configuration
+ * This is actually not needed as already set by default after reset */
+ FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
+#endif
+
lld_lcdWriteReg(0x0000,0x0001); lld_lcdDelay(5);
lld_lcdWriteReg(0x0003,0xA8A4); lld_lcdDelay(5);
lld_lcdWriteReg(0x000C,0x0000); lld_lcdDelay(5);
|