Add SSD1848 driver by czhou

1 files changed, 32 insertions, 0 deletions

diff --git a/drivers/gdisp/SSD1848/gdisp_lld_config.h b/drivers/gdisp/SSD1848/gdisp_lld_config.h
new file mode 100644
index 00000000..c7e7d906
--- /dev/null
+++ b/drivers/gdisp/SSD1848/gdisp_lld_config.h
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH           TRUE     /* This controller requires flushing */
+#define GDISP_HARDWARE_CONTROL         TRUE
+#define GDISP_HARDWARE_FILLS           TRUE
+#define GDISP_HARDWARE_STREAM_WRITE    TRUE
+#define GDISP_HARDWARE_CLEARS          TRUE
+#define GDISP_HARDWARE_BITFILLS        TRUE
+
+#define GDISP_LLD_PIXELFORMAT          GDISP_PIXELFORMAT_MONO
+
+/* This controller supports a special gdispControl() to inverse the display. */
+/* Pass a parameter of 1 for inverse and 0 for normal. */
+#define GDISP_CONTROL_INVERSE    (GDISP_CONTROL_LLD + 0)
+
+#endif  /* GFX_USE_GDISP */
+
+#endif  /* _GDISP_LLD_CONFIG_H */