Convert SSD1963 driver to new format.

Intergrate the old panel include file into the board file.

1 files changed, 0 insertions, 74 deletions

diff --git a/drivers/gdisp/SSD1963/gdisp_lld_panel_example.h b/drivers/gdisp/SSD1963/gdisp_lld_panel_example.h
deleted file mode 100644
index 72095495..00000000
--- a/drivers/gdisp/SSD1963/gdisp_lld_panel_example.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/gdisp/SSD1963/gdisp_lld_panel_example.h
- * @brief   TFT LCD panel properties.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_PANEL_H
-#define _GDISP_LLD_PANEL_H
-
-/* LCD panel specs */
-
-/* The timings need to follow the datasheet for your particular TFT/LCD screen (the actual screen, not the controller)
-*** Datasheets normally use a specific set of timings and acronyms, their value refers to the number of pixel clocks
-** Non-display periods refer to pulses/timings that occur before or after the timings that actually put pixels on the screen
-** Display periods refer to pulses/timings that directly put pixels on the screen
-HDP: Horizontal Display Period, normally the width - 1
-HT: Horizontal Total period (display + non-display)
-HPS: non-display period between the start of the horizontal sync (LLINE) signal and the first display data
-LPS: horizontal sync pulse (LLINE) start location in pixel clocks
-HPW: Horizontal sync Pulse Width
-VDP: Vertical Display period, normally height - 1
-VT: Vertical Total period (display + non-display)
-VPS: non-display period in lines between the start of the frame and the first display data in number of lines
-FPS: vertical sync pulse (LFRAME) start location in lines. 
-VPW: Vertical sync Pulse Width
-
-*** Here's how to convert them:
-HPS = SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH
-HT - HPS = GDISP_SCREEN_WIDTH + SCREEN_HSYNC_FRONT_PORCH
-=> 	SCREEN_HSYNC_FRONT_PORCH = ( HT - HPS ) - GDISP_SCREEN_WIDTH
-	SCREEN_HSYNC_PULSE = HPW
-	SCREEN_HSYNC_BACK_PORCH = HPS - HPW
-	SCREEN_HSYNC_PERIOD = HT
-	
-VPS = SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH
-VT - VPS = GDISP_SCREEN_HEIGHT + SCREEN_VSYNC_FRONT_PORCH
-=>	SCREEN_VSYNC_FRONT_PORCH = ( VT - VPS ) - GDISP_SCREEN_HEIGHT
-	SCREEN_VSYNC_PULSE = VPW
-	SCREEN_VSYNC_BACK_PORCH = VPS - LPS
-	SCREEN_VSYNC_PERIOD = VT
-*/
-
-#define SCREEN_FPS 60ULL
-
-//The following values are for a 4.3" TFT LCD
-
-#define GDISP_SCREEN_WIDTH 480
-#define GDISP_SCREEN_HEIGHT 272
-
-#define SCREEN_HSYNC_BACK_PORCH		2
-#define SCREEN_HSYNC_FRONT_PORCH	2
-#define SCREEN_HSYNC_PULSE			41
-
-#define SCREEN_VSYNC_BACK_PORCH		2
-#define SCREEN_VSYNC_FRONT_PORCH	2
-#define SCREEN_VSYNC_PULSE			10
-
-#define	SCREEN_HSYNC_PERIOD	(SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH + GDISP_SCREEN_WIDTH  + SCREEN_HSYNC_FRONT_PORCH)
-#define	SCREEN_VSYNC_PERIOD	(SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH + GDISP_SCREEN_HEIGHT + SCREEN_VSYNC_FRONT_PORCH)
-
-#define SCREEN_PCLK	(SCREEN_HSYNC_PERIOD * SCREEN_VSYNC_PERIOD * SCREEN_FPS)
-#define GDISP_FPR		((SCREEN_PCLK * 1048576)/100000000)
-
-#endif
-/** @} */