Convert SSD2119 to new driver format

1 files changed, 0 insertions, 109 deletions

diff --git a/drivers/gdisp/SSD2119/gdisp_lld_board_template.h b/drivers/gdisp/SSD2119/gdisp_lld_board_template.h
deleted file mode 100644
index 2e4d53df..00000000
--- a/drivers/gdisp/SSD2119/gdisp_lld_board_template.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/gdisp/SSD2119/gdisp_lld_board_template.h
- * @brief   GDISP Graphic Driver subsystem board template for the SSD2119 display.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-/**
- * @brief   Initialise the board for the display.
- * @notes   This board definition uses GPIO and assumes exclusive access to these GPIO pins
- *
- * @notapi
- */
-static inline void init_board(void) {
-
-}
-
-/**
- * @brief   Set or clear the lcd reset pin.
- *
- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
- *
- * @notapi
- */
-static inline void setpin_reset(bool_t state) {
-
-}
-
-/**
- * @brief   Set the lcd back-light level.
- *
- * @param[in] percent		0 to 100%
- *
- * @notapi
- */
-static inline void set_backlight(uint8_t percent) {
-
-}
-
-/**
- * @brief   Take exclusive control of the bus
- * @note	Not needed, not implemented
- *
- * @notapi
- */
-static inline void acquire_bus(void) {
-	/* Nothing to do here since LCD is the only device on that bus */
-}
-
-/**
- * @brief   Release exclusive control of the bus
- * @note	Not needed, not implemented
- *
- * @notapi
- */
-static inline void release_bus(void) {
-	/* Nothing to do here since LCD is the only device on that bus */
-}
-
-/**
- * @brief   Send data to the index register.
- *
- * @param[in] index		The index register to set
- *
- * @notapi
- */
-static inline void write_index(uint16_t index) {
-
-}
-
-/**
- * @brief   Send data to the lcd.
- *
- * @param[in] data		The data to send
- *
- * @notapi
- */
-static inline void write_data(uint16_t data) {
-
-}
-
-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
-/**
- * @brief   Read data from the lcd.
- *
- * @return	The data from the lcd
- * @note	The chip select may need to be asserted/de-asserted
- * 			around the actual spi read
- *
- * @notapi
- */
-static inline uint16_t read_data(void) {
-
-}
-#endif
-
-#endif /* _GDISP_LLD_BOARD_H */
-/** @} */