cleaned up board file mess

1 files changed, 109 insertions, 0 deletions

diff --git a/drivers/gdisp/SSD2119/gdisp_lld_board_template.h b/drivers/gdisp/SSD2119/gdisp_lld_board_template.h
new file mode 100644
index 00000000..26ca0d32
--- /dev/null
+++ b/drivers/gdisp/SSD2119/gdisp_lld_board_template.h
@@ -0,0 +1,109 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://chibios-gfx.com/license.html
+ */
+
+/**
+ * @file    drivers/gdisp/SSD2119/gdisp_lld_board_template.h
+ * @brief   GDISP Graphic Driver subsystem board template for the SSD2119 display.
+ *
+ * @addtogroup GDISP
+ * @{
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+/**
+ * @brief   Initialise the board for the display.
+ * @notes   This board definition uses GPIO and assumes exclusive access to these GPIO pins
+ *
+ * @notapi
+ */
+static inline void init_board(void) {
+
+}
+
+/**
+ * @brief   Set or clear the lcd reset pin.
+ *
+ * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
+ *
+ * @notapi
+ */
+static inline void setpin_reset(bool_t state) {
+
+}
+
+/**
+ * @brief   Set the lcd back-light level.
+ *
+ * @param[in] percent		0 to 100%
+ *
+ * @notapi
+ */
+static inline void set_backlight(uint8_t percent) {
+
+}
+
+/**
+ * @brief   Take exclusive control of the bus
+ * @note	Not needed, not implemented
+ *
+ * @notapi
+ */
+static inline void acquire_bus(void) {
+	/* Nothing to do here since LCD is the only device on that bus */
+}
+
+/**
+ * @brief   Release exclusive control of the bus
+ * @note	Not needed, not implemented
+ *
+ * @notapi
+ */
+static inline void release_bus(void) {
+	/* Nothing to do here since LCD is the only device on that bus */
+}
+
+/**
+ * @brief   Send data to the index register.
+ *
+ * @param[in] index		The index register to set
+ *
+ * @notapi
+ */
+static inline void write_index(uint16_t index) {
+
+}
+
+/**
+ * @brief   Send data to the lcd.
+ *
+ * @param[in] data		The data to send
+ *
+ * @notapi
+ */
+static inline void write_data(uint16_t data) {
+
+}
+
+#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
+/**
+ * @brief   Read data from the lcd.
+ *
+ * @return	The data from the lcd
+ * @note	The chip select may need to be asserted/de-asserted
+ * 			around the actual spi read
+ *
+ * @notapi
+ */
+static inline uint16_t read_data(void) {
+
+}
+#endif
+
+#endif /* _GDISP_LLD_BOARD_H */
+/** @} */