Removed TDISP module

3 files changed, 0 insertions, 300 deletions

diff --git a/drivers/tdisp/HD44780/tdisp_lld.c b/drivers/tdisp/HD44780/tdisp_lld.c
deleted file mode 100644
index 7b731c34..00000000
--- a/drivers/tdisp/HD44780/tdisp_lld.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/tdisp/HD44780/tdisp_lld.c
- * @brief   TDISP driver subsystem low level driver source for the HD44780 display
- *
- * @addtogroup TDISP
- * @{
- */
-
-#include "gfx.h"
-
-#if GFX_USE_TDISP /*|| defined(__DOXYGEN__)*/
-
-#include "tdisp_lld_board.h"
-
-/* Controller Specific Properties */
-#define CUSTOM_CHAR_COUNT		8
-#define CUSTOM_CHAR_XBITS		5
-#define CUSTOM_CHAR_YBITS		8
-
-/* Define the properties of our controller */
-tdispStruct	TDISP = {
-	TDISP_COLUMNS, TDISP_ROWS,		/* cols, rows */
-	CUSTOM_CHAR_XBITS, CUSTOM_CHAR_YBITS,	/* charBitsX, charBitsY */
-	CUSTOM_CHAR_COUNT			/* maxCustomChars */
-};
-
-/* display control settings */
-#define TDISP_DISPLAY_ON		0x04
-#define TDISP_CURSOR_ON			0x02
-#define TDISP_CURSOR_BLINK		0x01
-
-/* cursor movement settings */
-#define TDISP_SHIFT_ON			0x01
-#define	TDISP_CURSOR_INC		0x02
-
-/* display scroll settings */
-#define TDISP_SCROLL_DISPLAY		0x08
-#define TDISP_SCROLL_RIGHT		0x04
-
-static uint8_t	displaycontrol;
-static uint8_t	cursorcontrol;
-
-bool_t tdisp_lld_init(void) { 
-	/* initialise hardware */
-	init_board();
-	
-	/* The first part is the initialing code.
-	 * In this part only the lower nibble of the
-	 * byte is written directly to the display, thus
-	 * without write_cmd, which sends both high and
-	 * low nibble.
-	 */
-	
-	/* Give the LCD a little time to wake up */
-	gfxSleepMilliseconds(15);
-	
-	/* clear the RS-line to the display */
-	palClearPad(PORT_CTRL, PIN_RS);
-// 	#if BUS_4BITS
-		/* write three times 0x03 to display (4-bit mode only)
-		* with RS = low.
-		*/
-		writeToLCD(0x03); // 1x
-		gfxSleepMilliseconds(20);
-		writeToLCD(0x03); // 2x
-// 		gfxSleepMilliseconds(20);
-		writeToLCD(0x03); // 3x
-// 		gfxSleepMilliseconds(20);
-		/* Put display in 4-bit mode by
-		* write 0x02 to display.
-		*/
-		writeToLCD(0x02); // 4bit-modus
-// 		gfxSleepMilliseconds(20);
-// 	#else
-		/* write three times 0x30 to display (8-bit mode only)
-		* with RS = low.
-		*/
-// 		writeToLCD(0x30); // 1x
-// 		writeToLCD(0x30); // 2x
-// 		writeToLCD(0x30); // 3x
-// 	#endif	
-
-	/* From this point on, the LCD accepts
-	 * bytes sent with highnibbel first and than
-	 *the lownibble if working in 4-bit mode.
-	 * In 8-bit mode bytes are written in 1 action.
-	 */
-	
-	/* 4-bit modus, 2 lines en 5x7 characters */
-	write_cmd(0x28);
-// 	gfxSleepMilliseconds(20);
-	
-	/* set display on, cursor off and no blinking */
-	write_cmd(0x0C);
-// 	gfxSleepMilliseconds(20);
-	/* set cursor increase and direction */
-	write_cmd(0x06);
-// 	gfxSleepMilliseconds(20);
-	
-	displaycontrol = TDISP_DISPLAY_ON;
-	cursorcontrol = TDISP_CURSOR_INC;
-	/* END OF INITIALISATION */
-
-	return TRUE;
-}
-
-/* Clears the display. The display needs
- * a long time to process this command. So
- * an extra delay is insterted.
- */
-void tdisp_lld_clear(void) {
-	write_cmd(0x01);
-}
-
-/* Writes a character to the display */
-void tdisp_lld_draw_char(char c) {
-	write_data(c);
-}
-
-/* Set cursor position */
-void tdisp_lld_set_cursor(coord_t col, coord_t row) {
-	static const uint8_t row_offsets[] = { 0x00, 0x40, 0x14, 0x54 };
-
-	/*
-	 *  Short-cut:
-	 *
-	 *  If x and y = 0 then use the home command.
-	 *
-	 *  Note: There is probably no advantage as both commands are a single byte
-	 */
-//	if (col == 0 && row == 0) {
-//		write_cmd(0x02);
-//		return;
-//	}
-
-	write_cmd(0x80 | (col + row_offsets[row]));
-// 	write_cmd(0x80 | (0x40 + col));
-}
-
-/* Create a custom character to the display */
-void tdisp_lld_create_char(uint8_t address, uint8_t *charmap) {
-	int i;
-
-	write_cmd(0x40 | (address << 3));
-	for(i = 0; i < CUSTOM_CHAR_YBITS; i++) {
-		write_data(charmap[i]);
-	}
-
-}
-
-/* Write display control commands to the display */
-void tdisp_lld_control(uint16_t what, uint16_t value) {
-	switch(what) {
-		      case TDISP_CTRL_DISPLAY:
-				switch (value) {
-					case displayOff:
-						displaycontrol &= ~TDISP_DISPLAY_ON;
-						break;
-					case displayOn:
-						displaycontrol |= TDISP_DISPLAY_ON;
-						break;
-				}
-				write_cmd(0x08 | displaycontrol);
-				break;
-		      case TDISP_CTRL_CURSOR:
-				switch (value) {
-					case cursorBlinkingBlock:
-					case cursorBlinkingUnderline:
-					case cursorBlinkingBar:
-						displaycontrol |= TDISP_CURSOR_ON + TDISP_CURSOR_BLINK;
-						break;
-					case cursorBlock:
-					case cursorUnderline:
-					case cursorBar:
-						displaycontrol = (displaycontrol | TDISP_CURSOR_ON) & ~TDISP_CURSOR_BLINK;
-						break;
-					case cursorOff:
-					default:
-						displaycontrol &= ~(TDISP_CURSOR_ON | TDISP_CURSOR_BLINK); // zet alleen de cursor uit. Bewaar de overige instellingen
-						break;
-				}
-				write_cmd(0x08 | displaycontrol);
-				break;
-			case TDISP_CTRL_MOVE:
-				switch (value) {
-					case cursorIncrease:
-						cursorcontrol |= TDISP_CURSOR_INC; // increase cursor position
-						break;
-					case cursorDecrease:
-						cursorcontrol &= ~TDISP_CURSOR_INC; // decrease cursor position
-						break;
-				}
-				write_cmd(0x04 | cursorcontrol);
-				break;
-			case TDISP_CTRL_SHIFT:
-				switch (value) {
-					case shiftOn:
-						cursorcontrol |= TDISP_SHIFT_ON;
-						break;
-					case shiftOff:
-						cursorcontrol &= ~TDISP_SHIFT_ON;
-						break;
-				}
-				write_cmd(0x04 | cursorcontrol);
-				break;
-	}
-}
-
-/* Scrolls the display in a particular direction with an amount of characters and delays the scroll between each scroll step */
-void tdisp_lld_scroll(uint16_t direction, uint16_t amount, uint16_t delay) {
-  uint16_t scrollcontrol = 0;
-  uint16_t i;
-  
-  switch (direction) {
-    case displayScrollLeft:
-      scrollcontrol = TDISP_SCROLL_DISPLAY;
-      break;
-    case displayScrollRight:
-      scrollcontrol = TDISP_SCROLL_DISPLAY | TDISP_SCROLL_RIGHT;
-      break;
-  }
-  
-  for(i = 0; i < amount; i++) {
-    write_cmd(0x10 | scrollcontrol);
-    gfxSleepMilliseconds(delay);	
-  }
-}
-
-#if TDISP_USE_BACKLIGHT
-/* sets the brightness of the display backlight */
-void tdisp_lld_set_backlight(uint16_t percentage) {
-  set_backlight(percentage);
-}
-#endif
-
-#endif /* GFX_USE_TDISP */
-/** @} */
-
diff --git a/drivers/tdisp/HD44780/tdisp_lld.mk b/drivers/tdisp/HD44780/tdisp_lld.mk
deleted file mode 100644
index 88780bea..00000000
--- a/drivers/tdisp/HD44780/tdisp_lld.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-# List the required driver.
-GFXSRC += $(GFXLIB)/drivers/tdisp/HD44780/tdisp_lld.c
-
-# Required include directories
-GFXINC += $(GFXLIB)/drivers/tdisp/HD44780
-
diff --git a/drivers/tdisp/HD44780/tdisp_lld_board_example.h b/drivers/tdisp/HD44780/tdisp_lld_board_example.h
deleted file mode 100644
index 93e086db..00000000
--- a/drivers/tdisp/HD44780/tdisp_lld_board_example.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/tdisp/HD44780/tdisp_lld_board_example.h
- * @brief   TDISP driver subsystem board interface for the HD44780 display
- *
- * @addtogroup TDISP
- * @{
- */
-
-#ifndef _TDISP_LLD_BOARD_H
-#define _TDISP_LLD_BOARD_H
-
-/**
- * The board may override the default display size.
- * Uncomment the below if your board needs a non-standard size.
- */
-/*
-#ifndef TDISP_COLUMNS
-	#define TDISP_COLUMNS		16
-#endif
-#ifndef TDISP_ROWS
-	#define TDISP_ROWS			2
-#endif
-*/
-
-static void init_board(void) {
-	/* Code here */
-	#error "tdispHD44780: You must supply a definition for init_board for your board"
-}
-
-static void write_cmd(uint8_t data) {
-	/* Code here */
-	#error "tdispHD44780: You must supply a definition for write_cmd for your board"
-}
-
-static void write_data(uint8_t data) {
-	/* Code here */
-	#error "tdispHD44780: You must supply a definition for write_data for your board"
-}
-
-#endif /* _TDISP_LLD_BOARD_H */
-/** @} */
-