diff options
author | inmarket <andrewh@inmarket.com.au> | 2013-09-30 00:05:07 +1000 |
---|---|---|
committer | inmarket <andrewh@inmarket.com.au> | 2013-09-30 00:05:07 +1000 |
commit | 6499da5be310f8f3ef8f2d11dfcfb662499c8c17 (patch) | |
tree | 36322d95790e500c4aaca1097c806ba277b0bf0b /drivers | |
parent | a2aa837e09cd80a3d2fd9bd3097062ab06905227 (diff) | |
download | uGFX-6499da5be310f8f3ef8f2d11dfcfb662499c8c17.tar.gz uGFX-6499da5be310f8f3ef8f2d11dfcfb662499c8c17.tar.bz2 uGFX-6499da5be310f8f3ef8f2d11dfcfb662499c8c17.zip |
SSD1289 streaming driver (untested)
X streaming driver (untested)
Nokia6610 fixes
Read pixel streaming support for low level driver.
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld.c | 22 | ||||
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h | 7 | ||||
-rw-r--r-- | drivers/gdisp/SSD1289/gdisp_lld.c | 425 | ||||
-rw-r--r-- | drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h | 42 | ||||
-rw-r--r-- | drivers/gdisp/SSD1289/gdisp_lld_board_st_stm32f4_discovery.h | 63 | ||||
-rw-r--r-- | drivers/gdisp/SSD1289/gdisp_lld_board_template.h | 37 | ||||
-rw-r--r-- | drivers/gdisp/SSD1289/gdisp_lld_config.h | 17 | ||||
-rw-r--r-- | drivers/multiple/Win32/gdisp_lld.c | 4 | ||||
-rw-r--r-- | drivers/multiple/X/gdisp_lld.c | 136 | ||||
-rw-r--r-- | drivers/multiple/X/gdisp_lld_config.h | 11 |
10 files changed, 290 insertions, 474 deletions
diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld.c b/drivers/gdisp/Nokia6610GE8/gdisp_lld.c index e51e780f..bcccef80 100644 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld.c +++ b/drivers/gdisp/Nokia6610GE8/gdisp_lld.c @@ -107,7 +107,7 @@ /* Driver local variables. */ /*===========================================================================*/ -#if GDISP_HARDWARE_STREAM +#if GDISP_HARDWARE_STREAM_WRITE static color_t savecolor; #if GDISP_GE8_BROKEN_CONTROLLER static color_t firstcolor; @@ -184,18 +184,15 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { return TRUE; } -#if GDISP_HARDWARE_STREAM - LLDSPEC void gdisp_lld_stream_start(GDISPDriver *g) { +#if GDISP_HARDWARE_STREAM_WRITE + LLDSPEC void gdisp_lld_write_start(GDISPDriver *g) { acquire_bus(); write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x+g->p.cx-1); // Column address set write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y+g->p.cy-1); // Page address set write_cmd(RAMWR); g->flags &= ~(GDISP_FLG_ODDBYTE|GDISP_FLG_RUNBYTE); } -#endif - -#if GDISP_HARDWARE_STREAM - LLDSPEC void gdisp_lld_stream_color(GDISPDriver *g) { + LLDSPEC void gdisp_lld_write_color(GDISPDriver *g) { #if GDISP_GE8_BROKEN_CONTROLLER if (!(g->flags & GDISP_FLG_RUNBYTE)) { firstcolor = g->p.color; @@ -211,10 +208,7 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { g->flags |= GDISP_FLG_ODDBYTE; } } -#endif - -#if GDISP_HARDWARE_STREAM && GDISP_HARDWARE_STREAM_STOP - LLDSPEC void gdisp_lld_stream_stop(GDISPDriver *g) { + LLDSPEC void gdisp_lld_write_stop(GDISPDriver *g) { if ((g->flags & GDISP_FLG_ODDBYTE)) { #if GDISP_GE8_BROKEN_CONTROLLER /** @@ -247,7 +241,7 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { #endif #if GDISP_HARDWARE_DRAWPIXEL - void gdisp_lld_draw_pixel(GDISPDriver *g) { + LLDSPEC void gdisp_lld_draw_pixel(GDISPDriver *g) { acquire_bus(); switch(g->g.Orientation) { case GDISP_ROTATE_0: @@ -275,7 +269,7 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { /* ---- Optional Routines ---- */ #if GDISP_HARDWARE_FILLS - void gdisp_lld_fill_area(GDISPDriver *g) { + LLDSPEC void gdisp_lld_fill_area(GDISPDriver *g) { unsigned tuples; tuples = (g->p.cx*g->p.cy+1)>>1; // With an odd sized area we over-print by one pixel. @@ -308,7 +302,7 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { #endif #if GDISP_HARDWARE_BITFILLS - void gdisp_lld_blit_area(GDISPDriver *g) { + LLDSPEC void gdisp_lld_blit_area(GDISPDriver *g) { coord_t lg, x, y; color_t c1, c2; unsigned tuples; diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h b/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h index 5e950895..a9e11e03 100644 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h +++ b/drivers/gdisp/Nokia6610GE8/gdisp_lld_config.h @@ -25,7 +25,9 @@ #define GDISP_DRIVER_NAME "Nokia6610GE8" #define GDISP_DRIVER_STRUCT GDISP_Nokia6610GE8 -#define GDISP_NOKIA_ORIENTATION TRUE +#ifndef GDISP_NOKIA_ORIENTATION + #define GDISP_NOKIA_ORIENTATION TRUE +#endif #if GDISP_NOKIA_ORIENTATION && GDISP_NEED_CONTROL #define GDISP_HARDWARE_CONTROL TRUE @@ -34,8 +36,7 @@ #define GDISP_HARDWARE_BITFILLS TRUE #else #define GDISP_HARDWARE_CONTROL TRUE - #define GDISP_HARDWARE_STREAM TRUE - #define GDISP_HARDWARE_STREAM_STOP TRUE + #define GDISP_HARDWARE_STREAM_WRITE TRUE #endif #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB444 diff --git a/drivers/gdisp/SSD1289/gdisp_lld.c b/drivers/gdisp/SSD1289/gdisp_lld.c index a55dd467..84ffa6d1 100644 --- a/drivers/gdisp/SSD1289/gdisp_lld.c +++ b/drivers/gdisp/SSD1289/gdisp_lld.c @@ -17,8 +17,8 @@ #if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/
-/* Include the emulation code for things we don't support */
-#include "gdisp/lld/emulation.c"
+#define GDISP_LLD_DECLARATIONS
+#include "gdisp/lld/gdisp_lld.h"
/*===========================================================================*/
/* Driver local definitions. */
@@ -52,7 +52,7 @@ static inline void set_cursor(coord_t x, coord_t y) { * Reg 0x004F is 9 bit
* Use a bit mask to make sure they are not set too high
*/
- switch(GDISP.Orientation) {
+ switch(g->g.Orientation) {
case GDISP_ROTATE_180:
write_reg(0x004e, (GDISP_SCREEN_WIDTH-1-x) & 0x00FF);
write_reg(0x004f, (GDISP_SCREEN_HEIGHT-1-y) & 0x01FF);
@@ -85,14 +85,14 @@ static void set_viewport(coord_t x, coord_t y, coord_t cx, coord_t cy) { * 0 <= Reg(0x45) <= Reg(0x46) <= 0x13F
*/
- switch(GDISP.Orientation) {
+ switch(g->g.Orientation) {
case GDISP_ROTATE_0:
write_reg(0x44, (((x+cx-1) << 8) & 0xFF00 ) | (x & 0x00FF));
write_reg(0x45, y & 0x01FF);
write_reg(0x46, (y+cy-1) & 0x01FF);
break;
case GDISP_ROTATE_270:
- write_reg(0x44, (((y+cy-1) << 8) & 0xFF00 ) | (y & 0x00FF));
+ write_reg(0x44, (((x+cx-1) << 8) & 0xFF00 ) | (y & 0x00FF));
write_reg(0x45, x & 0x01FF);
write_reg(0x46, (x+cx-1) & 0x01FF);
break;
@@ -112,7 +112,7 @@ static void set_viewport(coord_t x, coord_t y, coord_t cx, coord_t cy) { }
static inline void reset_viewport(void) {
- set_viewport(0, 0, GDISP.Width, GDISP.Height);
+ set_viewport(0, 0, g->g.Width, g->g.Height);
}
/*===========================================================================*/
@@ -123,18 +123,7 @@ static inline void reset_viewport(void) { /* Driver exported functions. */
/*===========================================================================*/
-/* ---- Required Routines ---- */
-/*
- The following 2 routines are required.
- All other routines are optional.
-*/
-
-/**
- * @brief Low level GDISP driver initialization.
- *
- * @notapi
- */
-bool_t gdisp_lld_init(void) {
+LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) {
/* Initialise your display */
init_board();
@@ -196,365 +185,103 @@ bool_t gdisp_lld_init(void) { set_backlight(GDISP_INITIAL_BACKLIGHT);
/* Initialise the GDISP structure */
- GDISP.Width = GDISP_SCREEN_WIDTH;
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Orientation = GDISP_ROTATE_0;
- GDISP.Powermode = powerOn;
- GDISP.Backlight = GDISP_INITIAL_BACKLIGHT;
- GDISP.Contrast = GDISP_INITIAL_CONTRAST;
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- GDISP.clipx0 = 0;
- GDISP.clipy0 = 0;
- GDISP.clipx1 = GDISP.Width;
- GDISP.clipy1 = GDISP.Height;
- #endif
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Orientation = GDISP_ROTATE_0;
+ g->g.Powermode = powerOn;
+ g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+ g->g.Contrast = GDISP_INITIAL_CONTRAST;
return TRUE;
}
-/**
- * @brief Draws a pixel on the display.
- *
- * @param[in] x X location of the pixel
- * @param[in] y Y location of the pixel
- * @param[in] color The color of the pixel
- *
- * @notapi
- */
-void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) {
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- #endif
-
- acquire_bus();
- set_cursor(x, y);
- write_reg(0x0022, color);
- release_bus();
-}
-
-/* ---- Optional Routines ---- */
-/*
- All the below routines are optional.
- Defining them will increase speed but everything
- will work if they are not defined.
- If you are not using a routine - turn it off using
- the appropriate GDISP_HARDWARE_XXXX macro.
- Don't bother coding for obvious similar routines if
- there is no performance penalty as the emulation software
- makes a good job of using similar routines.
- eg. If gfillarea() is defined there is little
- point in defining clear() unless the
- performance bonus is significant.
- For good performance it is suggested to implement
- fillarea() and blitarea().
-*/
-
-#if GDISP_HARDWARE_CLEARS || defined(__DOXYGEN__)
- /**
- * @brief Clear the display.
- * @note Optional - The high level driver can emulate using software.
- *
- * @param[in] color The color of the pixel
- *
- * @notapi
- */
- void gdisp_lld_clear(color_t color) {
- unsigned area;
-
- area = GDISP_SCREEN_WIDTH * GDISP_SCREEN_HEIGHT;
-
+#if GDISP_HARDWARE_STREAM_WRITE
+ LLDSPEC void gdisp_lld_write_start(GDISPDriver *g) {
acquire_bus();
- reset_viewport();
- set_cursor(0, 0);
-
+ set_viewport(g->p.x, g->p.y, g->p.cx, g->p.cy);
stream_start();
-
- #if defined(GDISP_USE_FSMC) && defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
- uint8_t i;
- dmaStreamSetPeripheral(GDISP_DMA_STREAM, &color);
- dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
- for (i = area/65535; i; i--) {
- dmaStreamSetTransactionSize(GDISP_DMA_STREAM, 65535);
- dmaStreamEnable(GDISP_DMA_STREAM);
- dmaWaitCompletion(GDISP_DMA_STREAM);
- }
- dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area%65535);
- dmaStreamEnable(GDISP_DMA_STREAM);
- dmaWaitCompletion(GDISP_DMA_STREAM);
- #else
- uint32_t index;
- for(index = 0; index < area; index++)
- write_data(color);
- #endif //#ifdef GDISP_USE_DMA
-
+ }
+ LLDSPEC void gdisp_lld_write_color(GDISPDriver *g) {
+ write_data(color);
+ }
+ LLDSPEC void gdisp_lld_write_stop(GDISPDriver *g) {
stream_stop();
release_bus();
}
#endif
-#if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__)
- /**
- * @brief Fill an area with a color.
- * @note Optional - The high level driver can emulate using software.
- *
- * @param[in] x, y The start filled area
- * @param[in] cx, cy The width and height to be filled
- * @param[in] color The color of the fill
- *
- * @notapi
- */
- void gdisp_lld_fill_area(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) {
- unsigned area;
-
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }
- if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }
- if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
- if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
- #endif
-
- area = cx*cy;
+#if GDISP_HARDWARE_STREAM_READ
+ LLDSPEC void gdisp_lld_read_start(GDISPDriver *g) {
+ uint16_t dummy;
acquire_bus();
- set_viewport(x, y, cx, cy);
+ set_viewport(g->p.x, g->p.y, g->p.cx, g->p.cy);
stream_start();
-
- #if defined(GDISP_USE_FSMC) && defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
- uint8_t i;
- dmaStreamSetPeripheral(GDISP_DMA_STREAM, &color);
- dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
- for (i = area/65535; i; i--) {
- dmaStreamSetTransactionSize(GDISP_DMA_STREAM, 65535);
- dmaStreamEnable(GDISP_DMA_STREAM);
- dmaWaitCompletion(GDISP_DMA_STREAM);
- }
- dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area%65535);
- dmaStreamEnable(GDISP_DMA_STREAM);
- dmaWaitCompletion(GDISP_DMA_STREAM);
- #else
- uint32_t index;
- for(index = 0; index < area; index++)
- write_data(color);
- #endif //#ifdef GDISP_USE_DMA
-
+ setreadmode();
+ dummy = read_data(); // dummy read
+ }
+ LLDSPEC color_t gdisp_lld_read_color(GDISPDriver *g) {
+ return read_data();
+ }
+ LLDSPEC void gdisp_lld_read_stop(GDISPDriver *g) {
+ setwritemode();
stream_stop();
release_bus();
}
#endif
-#if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__)
- /**
- * @brief Fill an area with a bitmap.
- * @note Optional - The high level driver can emulate using software.
- *
- * @param[in] x, y The start filled area
- * @param[in] cx, cy The width and height to be filled
- * @param[in] srcx, srcy The bitmap position to start the fill from
- * @param[in] srccx The width of a line in the bitmap.
- * @param[in] buffer The pixels to use to fill the area.
- *
- * @notapi
- */
- void gdisp_lld_blit_area_ex(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) {
-
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; }
- if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; }
- if (srcx+cx > srccx) cx = srccx - srcx;
- if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
- if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
- #endif
-
- buffer += srcx + srcy * srccx;
-
+#if GDISP_HARDWARE_FILLS && defined(GDISP_USE_DMA)
+ LLDSPEC void gdisp_lld_fill_area(GDISPDriver *g) {
acquire_bus();
- set_viewport(x, y, cx, cy);
+ set_viewport(g->p.x, g->p.y, g->p.cx, g->p.cy);
stream_start();
-
- #if defined(GDISP_USE_FSMC) && defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM)
- uint32_t area = cx*cy;
- uint8_t i;
- dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer);
- dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PINC | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
- for (i = area/65535; i; i--) {
- dmaStreamSetTransactionSize(GDISP_DMA_STREAM, 65535);
- dmaStreamEnable(GDISP_DMA_STREAM);
- dmaWaitCompletion(GDISP_DMA_STREAM);
- }
- dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area%65535);
- dmaStreamEnable(GDISP_DMA_STREAM);
- dmaWaitCompletion(GDISP_DMA_STREAM);
- #else
- coord_t endx, endy;
- uint32_t lg;
- endx = srcx + cx;
- endy = y + cy;
- lg = srccx - cx;
- for(; y < endy; y++, buffer += lg)
- for(x=srcx; x < endx; x++)
- write_data(*buffer++);
- #endif //#ifdef GDISP_USE_DMA
-
+ dma_with_noinc(&color, g->p.cx*g->p.cy)
stream_stop();
release_bus();
}
#endif
-#if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD) || defined(__DOXYGEN__)
- /**
- * @brief Get the color of a particular pixel.
- * @note Optional.
- * @note If x,y is off the screen, the result is undefined.
- *
- * @param[in] x, y The pixel to be read
- *
- * @notapi
- */
- color_t gdisp_lld_get_pixel_color(coord_t x, coord_t y) {
- color_t color;
+#if GDISP_HARDWARE_BITFILLS && defined(GDISP_USE_DMA)
+ LLDSPEC void gdisp_lld_blit_area(GDISPDriver *g) {
+ pixel_t *buffer;
+ coord_t ycnt;
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < 0 || x >= GDISP.Width || y < 0 || y >= GDISP.Height) return 0;
- #endif
+ buffer = (pixel_t *)g->p.ptr + g->p.x1 + g->p.y1 * g->p.x2;
acquire_bus();
- set_cursor(x, y);
+ set_viewport(g->p.x, g->p.y, g->p.cx, g->p.cy);
stream_start();
- /* FSMC timing */
- FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_3 | FSMC_BTR1_DATAST_3 | FSMC_BTR1_BUSTURN_0 ;
-
- color = read_data(); // dummy read
- color = read_data();
-
- /* FSMC timing */
- FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0 ;
-
- stream_stop();
- release_bus();
-
- return color;
- }
-#endif
-
-#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL) || defined(__DOXYGEN__)
- /**
- * @brief Scroll vertically a section of the screen.
- * @note Optional.
- * @note If x,y + cx,cy is off the screen, the result is undefined.
- * @note If lines is >= cy, it is equivelent to a area fill with bgcolor.
- *
- * @param[in] x, y The start of the area to be scrolled
- * @param[in] cx, cy The size of the area to be scrolled
- * @param[in] lines The number of lines to scroll (Can be positive or negative)
- * @param[in] bgcolor The color to fill the newly exposed area.
- *
- * @notapi
- */
- void gdisp_lld_vertical_scroll(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) {
- static color_t buf[((GDISP_SCREEN_HEIGHT > GDISP_SCREEN_WIDTH ) ? GDISP_SCREEN_HEIGHT : GDISP_SCREEN_WIDTH)];
- coord_t row0, row1;
- unsigned i, gap, abslines, j;
-
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }
- if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }
- if (!lines || cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
- if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
- #endif
-
- abslines = lines < 0 ? -lines : lines;
-
- acquire_bus();
- if ((coord_t)abslines >= cy) {
- abslines = cy;
- gap = 0;
+ if (g->p.x2 == g->p.cx) {
+ dma_with_inc(buffer, g->p.cx*g->p.cy);
} else {
- gap = cy - abslines;
- for(i = 0; i < gap; i++) {
- if(lines > 0) {
- row0 = y + i + lines;
- row1 = y + i;
- } else {
- row0 = (y - i - 1) + lines;
- row1 = (y - i - 1);
- }
-
- /* read row0 into the buffer and then write at row1*/
- set_viewport(x, row0, cx, 1);
- stream_start();
-
- /* FSMC timing */
- FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_3 | FSMC_BTR1_DATAST_3 | FSMC_BTR1_BUSTURN_0 ;
-
- j = read_data(); // dummy read
- for (j = 0; (coord_t)j < cx; j++)
- buf[j] = read_data();
-
- /* FSMC timing */
- FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0 ;
-
- stream_stop();
-
- set_viewport(x, row1, cx, 1);
- stream_start();
- for (j = 0; (coord_t)j < cx; j++)
- write_data(buf[j]);
- stream_stop();
- }
+ for (ycnt = g->p.cy; ycnt; ycnt--, buffer += g->p.x2)
+ dma_with_inc(buffer, g->p.cy);
}
-
- /* fill the remaining gap */
- set_viewport(x, lines > 0 ? (y+(coord_t)gap) : y, cx, abslines);
- stream_start();
- gap = cx*abslines;
- for(i = 0; i < gap; i++) write_data(bgcolor);
stream_stop();
release_bus();
}
#endif
-#if (GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL) || defined(__DOXYGEN__)
- /**
- * @brief Driver Control
- * @details Unsupported control codes are ignored.
- * @note The value parameter should always be typecast to (void *).
- * @note There are some predefined and some specific to the low level driver.
- * @note GDISP_CONTROL_POWER - Takes a gdisp_powermode_t
- * GDISP_CONTROL_ORIENTATION - Takes a gdisp_orientation_t
- * GDISP_CONTROL_BACKLIGHT - Takes an int from 0 to 100. For a driver
- * that only supports off/on anything other
- * than zero is on.
- * GDISP_CONTROL_CONTRAST - Takes an int from 0 to 100.
- * GDISP_CONTROL_LLD - Low level driver control constants start at
- * this value.
- *
- * @param[in] what What to do.
- * @param[in] value The value to use (always cast to a void *).
- *
- * @notapi
- */
- void gdisp_lld_control(unsigned what, void *value) {
- switch(what) {
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+ LLDSPEC void gdisp_lld_control(GDISPDriver *g) {
+ switch(g->p.x) {
case GDISP_CONTROL_POWER:
- if (GDISP.Powermode == (gdisp_powermode_t)value)
+ if (g->g.Powermode == (powermode_t)g->p.ptr)
return;
- switch((gdisp_powermode_t)value) {
+ switch((powermode_t)g->p.ptr) {
case powerOff:
acquire_bus();
write_reg(0x0010, 0x0000); // leave sleep mode
write_reg(0x0007, 0x0000); // halt operation
- write_reg(0x0000, 0x0000); // turn off oszillator
- write_reg(0x0010, 0x0001); // enter sleepmode
+ write_reg(0x0000, 0x0000); // turn off oscillator
+ write_reg(0x0010, 0x0001); // enter sleep mode
release_bus();
break;
case powerOn:
acquire_bus();
write_reg(0x0010, 0x0000); // leave sleep mode
release_bus();
- if (GDISP.Powermode != powerSleep)
+ if (g->g.Powermode != powerSleep)
gdisp_lld_init();
break;
case powerSleep:
@@ -565,20 +292,20 @@ void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) { default:
return;
}
- GDISP.Powermode = (gdisp_powermode_t)value;
+ g->g.Powermode = (powermode_t)g->p.ptr;
return;
case GDISP_CONTROL_ORIENTATION:
- if (GDISP.Orientation == (gdisp_orientation_t)value)
+ if (g->g.Orientation == (orientation_t)g->p.ptr)
return;
- switch((gdisp_orientation_t)value) {
+ switch((orientation_t)g->p.ptr) {
case GDISP_ROTATE_0:
acquire_bus();
write_reg(0x0001, 0x2B3F);
/* ID = 11 AM = 0 */
write_reg(0x0011, 0x6070);
release_bus();
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Width = GDISP_SCREEN_WIDTH;
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
break;
case GDISP_ROTATE_90:
acquire_bus();
@@ -586,8 +313,8 @@ void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) { /* ID = 11 AM = 1 */
write_reg(0x0011, 0x6078);
release_bus();
- GDISP.Height = GDISP_SCREEN_WIDTH;
- GDISP.Width = GDISP_SCREEN_HEIGHT;
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
break;
case GDISP_ROTATE_180:
acquire_bus();
@@ -595,8 +322,8 @@ void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) { /* ID = 01 AM = 0 */
write_reg(0x0011, 0x6040);
release_bus();
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Width = GDISP_SCREEN_WIDTH;
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
break;
case GDISP_ROTATE_270:
acquire_bus();
@@ -604,31 +331,23 @@ void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) { /* ID = 01 AM = 1 */
write_reg(0x0011, 0x6048);
release_bus();
- GDISP.Height = GDISP_SCREEN_WIDTH;
- GDISP.Width = GDISP_SCREEN_HEIGHT;
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
break;
default:
return;
}
- #if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION
- GDISP.clipx0 = 0;
- GDISP.clipy0 = 0;
- GDISP.clipx1 = GDISP.Width;
- GDISP.clipy1 = GDISP.Height;
- #endif
- GDISP.Orientation = (gdisp_orientation_t)value;
+ g->g.Orientation = (orientation_t)value;
return;
case GDISP_CONTROL_BACKLIGHT:
- if ((unsigned)value > 100)
- value = (void *)100;
- set_backlight((unsigned)value);
- GDISP.Backlight = (unsigned)value;
+ if ((unsigned)g->p.ptr > 100)
+ g->p.ptr = (void *)100;
+ set_backlight((unsigned)g->p.ptr);
+ g->g.Backlight = (unsigned)g->p.ptr;
return;
+ //case GDISP_CONTROL_CONTRAST:
default:
return;
-/*
- case GDISP_CONTROL_CONTRAST:
-*/
}
}
#endif
diff --git a/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h b/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h index 38d9e04d..e55e7cd1 100644 --- a/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h +++ b/drivers/gdisp/SSD1289/gdisp_lld_board_firebullstm32f103.h @@ -112,7 +112,28 @@ static inline void write_data(uint16_t data) { CLR_WR; SET_WR;
}
-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
+/** + * @brief Set the bus in read mode + * + * @notapi + */ +static inline void setreadmode(void) { + // change pin mode to digital input + palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT); + CLR_RD; +} + +/** + * @brief Set the bus back into write mode + * + * @notapi + */ +static inline void setwritemode(void) { + // change pin mode back to digital output + SET_RD; + palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL); +} + /**
* @brief Read data from the lcd.
*
@@ -123,22 +144,13 @@ static inline void write_data(uint16_t data) { * @notapi
*/
static inline uint16_t read_data(void) {
- uint16_t value;
-
- // change pin mode to digital input
- palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
-
- CLR_RD;
- value = palReadPort(GPIOE);
- value = palReadPort(GPIOE);
- SET_RD;
-
- // change pin mode back to digital output
- palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
-
- return value;
+ return palReadPort(GPIOE);
}
#endif
+#if defined(GDISP_USE_DMA) + #error "GDISP - SSD1289: The GPIO interface does not support DMA" +#endif + #endif /* _GDISP_LLD_BOARD_H */
/** @} */
diff --git a/drivers/gdisp/SSD1289/gdisp_lld_board_st_stm32f4_discovery.h b/drivers/gdisp/SSD1289/gdisp_lld_board_st_stm32f4_discovery.h index 9d46d64b..7097347b 100644 --- a/drivers/gdisp/SSD1289/gdisp_lld_board_st_stm32f4_discovery.h +++ b/drivers/gdisp/SSD1289/gdisp_lld_board_st_stm32f4_discovery.h @@ -18,10 +18,7 @@ #define GDISP_REG ((volatile uint16_t *) 0x60000000)[0] /* RS = 0 */ #define GDISP_RAM ((volatile uint16_t *) 0x60020000)[0] /* RS = 1 */ - -#define GDISP_USE_FSMC -#define GDISP_USE_DMA -#define GDISP_DMA_STREAM STM32_DMA2_STREAM6 +#define GDISP_DMA_STREAM STM32_DMA2_STREAM6 const unsigned char FSMC_Bank = 0; @@ -55,20 +52,22 @@ static inline void init_board(void) { /* FSMC setup for F1/F3 */ rccEnableAHB(RCC_AHBENR_FSMCEN, 0); - #if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM) - #error "DMA not implemented for F1/F3 Devices" + #if defined(GDISP_USE_DMA) + #error "GDISP: SSD1289 - DMA not implemented for F1/F3 Devices" #endif #elif defined(STM32F4XX) || defined(STM32F2XX) /* STM32F2-F4 FSMC init */ rccEnableAHB3(RCC_AHB3ENR_FSMCEN, 0); - #if defined(GDISP_USE_DMA) && defined(GDISP_DMA_STREAM) + #if defined(GDISP_USE_DMA) if (dmaStreamAllocate(GDISP_DMA_STREAM, 0, NULL, NULL)) gfxExit(); dmaStreamSetMemory0(GDISP_DMA_STREAM, &GDISP_RAM); dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + #else + #warning "GDISP: SSD1289 - DMA is supported for F2/F4 Devices. Define GDISP_USE_DMA in your gfxconf.h to turn this on for better performance." #endif #else - #error "FSMC not implemented for this device" + #error "GDISP: SSD1289 - FSMC not implemented for this device" #endif /* set pins to FSMC mode */ @@ -155,17 +154,61 @@ static inline void write_index(uint16_t index) { GDISP_REG = index; } */ static inline void write_data(uint16_t data) { GDISP_RAM = data; } -#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__) +/** + * @brief Set the bus in read mode + * + * @notapi + */ +static inline void setreadmode(void) { + FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_3 | FSMC_BTR1_DATAST_3 | FSMC_BTR1_BUSTURN_0; /* FSMC timing */ +} + +/** + * @brief Set the bus back into write mode + * + * @notapi + */ +static inline void setwritemode(void) { + FSMC_Bank1->BTCR[FSMC_Bank+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0; /* FSMC timing */ +} + /** * @brief Read data from the lcd. * * @return The data from the lcd * @note The chip select may need to be asserted/de-asserted * around the actual spi read - * + * * @notapi */ static inline uint16_t read_data(void) { return GDISP_RAM; } + +#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__) + /** + * @brief Transfer data using DMA but don't increment the source address + */ + static inline dma_with_noinc(color_t *buffer, int area) { + dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + for (; area > 0; area -= 65535) { + dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area); + dmaStreamEnable(GDISP_DMA_STREAM); + dmaWaitCompletion(GDISP_DMA_STREAM); + } + } + + /** + * @brief Transfer data using DMA incrementing the source address + */ + static inline dma_with_inc(color_t *buffer, int area) { + dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer); + dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PINC | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M); + for (; area > 0; area -= 65535) { + dmaStreamSetTransactionSize(GDISP_DMA_STREAM, area > 65535 ? 65535 : area); + dmaStreamEnable(GDISP_DMA_STREAM); + dmaWaitCompletion(GDISP_DMA_STREAM); + } + } #endif #endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/gdisp/SSD1289/gdisp_lld_board_template.h b/drivers/gdisp/SSD1289/gdisp_lld_board_template.h index e5d10355..8b55bed3 100644 --- a/drivers/gdisp/SSD1289/gdisp_lld_board_template.h +++ b/drivers/gdisp/SSD1289/gdisp_lld_board_template.h @@ -87,7 +87,24 @@ static inline void write_data(uint16_t data) { } -#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__) +/** + * @brief Set the bus in read mode + * + * @notapi + */ +static inline void setreadmode(void) { + +} + +/** + * @brief Set the bus back into write mode + * + * @notapi + */ +static inline void setwritemode(void) { + +} + /** * @brief Read data from the lcd. * @@ -100,6 +117,24 @@ static inline void write_data(uint16_t data) { static inline uint16_t read_data(void) { } + +/** + * The below section you can replace with #error if your interface doesn't support DMA + */ +#if defined(GDISP_USE_DMA) || defined(__DOXYGEN__) + //#error "GDISP - SSD1289: This interface does not support DMA" + + /** + * @brief Transfer data using DMA but don't increment the source address + */ + static inline dma_with_noinc(color_t *buffer, int area) { + } + + /** + * @brief Transfer data using DMA incrementing the source address + */ + static inline dma_with_inc(color_t *buffer, int area) { + } #endif #endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/gdisp/SSD1289/gdisp_lld_config.h b/drivers/gdisp/SSD1289/gdisp_lld_config.h index 989cc3af..9c00ce39 100644 --- a/drivers/gdisp/SSD1289/gdisp_lld_config.h +++ b/drivers/gdisp/SSD1289/gdisp_lld_config.h @@ -23,13 +23,16 @@ /*===========================================================================*/
#define GDISP_DRIVER_NAME "SSD1289"
-
-#define GDISP_HARDWARE_CLEARS TRUE
-#define GDISP_HARDWARE_FILLS TRUE
-#define GDISP_HARDWARE_BITFILLS TRUE
-#define GDISP_HARDWARE_SCROLL TRUE
-#define GDISP_HARDWARE_PIXELREAD TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
+#define GDISP_DRIVER_STRUCT GDISP_SSD1289 + +#define GDISP_HARDWARE_STREAM_WRITE TRUE +#define GDISP_HARDWARE_STREAM_READ TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#if defined(GDISP_USE_DMA)
+ #define GDISP_HARDWARE_FILLS TRUE
+ #define GDISP_HARDWARE_BITFILLS TRUE +#endif
#define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB565
diff --git a/drivers/multiple/Win32/gdisp_lld.c b/drivers/multiple/Win32/gdisp_lld.c index f55f3700..41141a90 100644 --- a/drivers/multiple/Win32/gdisp_lld.c +++ b/drivers/multiple/Win32/gdisp_lld.c @@ -463,7 +463,7 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { #endif #if GDISP_HARDWARE_BITFILLS - void gdisp_lld_blit_area(GDISPDriver *g) { + LLDSPEC void gdisp_lld_blit_area(GDISPDriver *g) { BITMAPV4HEADER bmpInfo; HDC dcScreen; pixel_t * buffer; @@ -577,7 +577,7 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { #endif #if GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL - void gdisp_lld_vertical_scroll(GDISPDriver *g) { + LLDSPEC void gdisp_lld_vertical_scroll(GDISPDriver *g) { HDC dcScreen; RECT rect; coord_t lines; diff --git a/drivers/multiple/X/gdisp_lld.c b/drivers/multiple/X/gdisp_lld.c index 13368bc1..9c6a7123 100644 --- a/drivers/multiple/X/gdisp_lld.c +++ b/drivers/multiple/X/gdisp_lld.c @@ -14,6 +14,9 @@ #if GFX_USE_GDISP +#define GDISP_LLD_DECLARATIONS +#include "gdisp/lld/gdisp_lld.h" + /** * Our color model - Default or 24 bit only. * @@ -25,26 +28,23 @@ #define GDISP_FORCE_24BIT FALSE #endif +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 480 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 640 +#endif + #if GINPUT_NEED_MOUSE /* Include mouse support code */ #include "ginput/lld/mouse.h" #endif -/* Include the emulation code for things we don't support */ -#include "gdisp/lld/emulation.c" - #include <X11/Xlib.h> #include <X11/Xutil.h> #include <stdio.h> #include <stdlib.h> -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 480 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 640 -#endif - Display *dis; int scr; Window win; @@ -130,7 +130,7 @@ static int FatalXIOError(Display *d) { exit(0); } -bool_t gdisp_lld_init(void) +LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) { { XSizeHints *pSH; XSetWindowAttributes xa; @@ -212,69 +212,81 @@ bool_t gdisp_lld_init(void) gfxThreadClose(hth); /* Initialise the GDISP structure to match */ - GDISP.Orientation = GDISP_ROTATE_0; - GDISP.Powermode = powerOn; - GDISP.Backlight = 100; - GDISP.Contrast = 50; - GDISP.Width = GDISP_SCREEN_WIDTH; - GDISP.Height = GDISP_SCREEN_HEIGHT; - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - GDISP.clipx0 = 0; - GDISP.clipy0 = 0; - GDISP.clipx1 = GDISP.Width; - GDISP.clipy1 = GDISP.Height; - #endif + g->g.Orientation = g->g_ROTATE_0; + g->g.Powermode = powerOn; + g->g.Backlight = 100; + g->g.Contrast = 50; + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; return TRUE; } -void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) +LLDSPEC void gdisp_lld_draw_pixel(GDISPDriver *g) { XColor col; - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - // Clip pre orientation change - if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; - #endif - - col.red = RED_OF(color) << 8; - col.green = GREEN_OF(color) << 8; - col.blue = BLUE_OF(color) << 8; + col.red = RED_OF(g->p.color) << 8; + col.green = GREEN_OF(g->p.color) << 8; + col.blue = BLUE_OF(g->p.color) << 8; XAllocColor(dis, cmap, &col); XSetForeground(dis, gc, col.pixel); - XDrawPoint(dis, pix, gc, (int)x, (int)y ); - XDrawPoint(dis, win, gc, (int)x, (int)y ); + XDrawPoint(dis, pix, gc, (int)g->p.x, (int)g->p.y ); + XDrawPoint(dis, win, gc, (int)g->p.x, (int)g->p.y ); XFlush(dis); } -void gdisp_lld_fill_area(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) { - XColor col; - - #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP - // Clip pre orientation change - if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; } - if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; } - if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return; - if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x; - if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y; - #endif - - col.red = RED_OF(color) << 8; - col.green = GREEN_OF(color) << 8; - col.blue = BLUE_OF(color) << 8; - XAllocColor(dis, cmap, &col); - XSetForeground(dis, gc, col.pixel); - XFillRectangle(dis, pix, gc, x, y, cx, cy); - XFillRectangle(dis, win, gc, x, y, cx, cy); - XFlush(dis); -} +#if GDISP_HARDWARE_FILLS + LLDSPEC void gdisp_lld_fill_area(GDISPDriver *g) { + XColor col; + + col.red = RED_OF(g->p.color) << 8; + col.green = GREEN_OF(g->p.color) << 8; + col.blue = BLUE_OF(g->p.color) << 8; + XAllocColor(dis, cmap, &col); + XSetForeground(dis, gc, col.pixel); + XFillRectangle(dis, pix, gc, g->p.x, g->p.y, g->p.cx, g->p.cy); + XFillRectangle(dis, win, gc, g->p.x, g->p.y, g->p.cx, g->p.cy); + XFlush(dis); + } +#endif + +#if 0 && GDISP_HARDWARE_BITFILLS + LLDSPEC void gdisp_lld_blit_area(GDISPDriver *g) { + // Start of Bitblit code + + //XImage bitmap; + //pixel_t *bits; + // bits = malloc(vis.depth * GDISP_SCREEN_WIDTH * GDISP_SCREEN_HEIGHT); + // bitmap = XCreateImage(dis, vis, vis.depth, ZPixmap, + // 0, bits, GDISP_SCREEN_WIDTH, GDISP_SCREEN_HEIGHT, + // 0, 0); + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDISPDriver *g) { + XColor color; + XImage *img; -// Start of Bitblit code -//XImage bitmap; -//pixel_t *bits; -// bits = malloc(vis.depth * GDISP_SCREEN_WIDTH * GDISP_SCREEN_HEIGHT); -// bitmap = XCreateImage(dis, vis, vis.depth, ZPixmap, -// 0, bits, GDISP_SCREEN_WIDTH, GDISP_SCREEN_HEIGHT, -// 0, 0); + img = XGetImage (dis, pix, g->p.x, g->p.y, 1, 1, AllPlanes, XYPixmap); + color->pixel = XGetPixel (img, 0, 0); + XFree(img); + XQueryColor(dis, cmap, &color); + return RGB2COLOR(c.red>>8, c.green>>8, c.blue>>8); + } +#endif + +#if GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL + LLDSPEC void gdisp_lld_vertical_scroll(GDISPDriver *g) { + if (g->p.y1 > 0) { + XCopyArea(dis, pix, pix, gc, g->p.x, g->p.y+g->p.y1, g->p.cx, g->p.cy-g->p.y1, g->p.x, g->p.y); + XCopyArea(dis, pix, win, gc, g->p.x, g->p.y, g->p.cx, g->p.cy-g->p.y1, g->p.x, g->p.y); + } else { + XCopyArea(dis, pix, pix, gc, g->p.x, g->p.y, g->p.cx, g->p.cy+g->p.y1, g->p.x, g->p.y-g->p.y1); + XCopyArea(dis, pix, win, gc, g->p.x, g->p.y-lines, g->p.cx, g->p.cy+g->p.y1, g->p.x, g->p.y-g->p.y1); + } + } +#endif #if GINPUT_NEED_MOUSE diff --git a/drivers/multiple/X/gdisp_lld_config.h b/drivers/multiple/X/gdisp_lld_config.h index 0cacc4f8..0bd76a2c 100644 --- a/drivers/multiple/X/gdisp_lld_config.h +++ b/drivers/multiple/X/gdisp_lld_config.h @@ -23,17 +23,14 @@ /*===========================================================================*/ #define GDISP_DRIVER_NAME "Linux emulator - X11" +#define GDISP_DRIVER_STRUCT GDISP_X11 -#define GDISP_HARDWARE_CLEARS FALSE +#define GDISP_HARDWARE_DRAWPIXEL TRUE #define GDISP_HARDWARE_FILLS TRUE #define GDISP_HARDWARE_BITFILLS FALSE -#define GDISP_HARDWARE_SCROLL FALSE -#define GDISP_HARDWARE_PIXELREAD FALSE +#define GDISP_HARDWARE_SCROLL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE #define GDISP_HARDWARE_CONTROL FALSE -#define GDISP_HARDWARE_CIRCLES FALSE -#define GDISP_HARDWARE_CIRCLEFILLS FALSE -#define GDISP_HARDWARE_ARCS FALSE -#define GDISP_HARDWARE_ARCFILLS FALSE #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 |