SSD1963 Driver - Removed old config files

2 files changed, 0 insertions, 268 deletions

diff --git a/drivers/gdisp/SSD1963/gdisp_lld_board_example.h b/drivers/gdisp/SSD1963/gdisp_lld_board_example.h
deleted file mode 100644
index 12d40486..00000000
--- a/drivers/gdisp/SSD1963/gdisp_lld_board_example.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*

-    ChibiOS/GFX - Copyright (C) 2012, 2013

-                 Joel Bodenmann aka Tectu <joel@unormal.org>

-

-    This file is part of ChibiOS/GFX.

-

-    ChibiOS/GFX is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/GFX is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file    drivers/gdisp/SSD1963/gdisp_lld_board_example.h

- * @brief   GDISP Graphic Driver subsystem board interface for the SSD1963 display.

- *

- * @addtogroup GDISP

- * @{

- */

-

-#ifndef _GDISP_LLD_BOARD_H

-#define _GDISP_LLD_BOARD_H

-

-#if defined(GDISP_USE_GPIO)

-	#define Set_CS		palSetPad(GDISP_CMD_PORT, GDISP_CS);

-	#define Clr_CS		palClearPad(GDISP_CMD_PORT, GDISP_CS);

-	#define Set_RS		palSetPad(GDISP_CMD_PORT, GDISP_RS);

-	#define Clr_RS		palClearPad(GDISP_CMD_PORT, GDISP_RS);

-	#define Set_WR		palSetPad(GDISP_CMD_PORT, GDISP_WR);

-	#define Clr_WR		palClearPad(GDISP_CMD_PORT, GDISP_WR);

-	#define Set_RD		palSetPad(GDISP_CMD_PORT, GDISP_RD);

-	#define Clr_RD		palClearPad(GDISP_CMD_PORT, GDISP_RD);

-#endif

-

-#if defined(GDISP_USE_FSMC)

-	/* Using FSMC A16 as RS */

-	#define GDISP_REG              (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */

-	#define GDISP_RAM              (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */

-#endif

-

-/**

- * @brief   Send data to the index register.

- *

- * @param[in] index		The index register to set

- *

- * @notapi

- */

-static inline void write_index(uint16_t index) {

-	Set_CS; Set_RS; Set_WR; Clr_RD;

-	palWritePort(GDISP_DATA_PORT, index);

-	Clr_CS;

-}

-

-/**

- * @brief   Send data to the lcd.

- *

- * @param[in] data		The data to send

- * 

- * @notapi

- */

-static inline void write_data(uint16_t data) {

-	Set_CS; Clr_RS; Set_WR; Clr_RD;

-	palWritePort(GDISP_DATA_PORT, data);

-	Clr_CS;

-}

-

-/**

- * @brief   Initialise the board for the display.

- *

- * @notapi

- */

-static inline void init_board(void) {

-	

-	IOBus busCMD = {GDISP_CMD_PORT, (1 << GDISP_CS) | (1 << GDISP_RS) | (1 << GDISP_WR) | (1 << GDISP_RD), 0};

-	IOBus busDATA = {GDISP_CMD_PORT, 0xFFFFF, 0};

-	palSetBusMode(&busCMD, PAL_MODE_OUTPUT_PUSHPULL);

-	palSetBusMode(&busDATA, PAL_MODE_OUTPUT_PUSHPULL);

-}

-

-static inline void post_init_board(void) {

-	/* Nothing to do here */

-}

-

-/**

- * @brief   Set or clear the lcd reset pin.

- *

- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation

- * 

- * @notapi

- */

-static inline void setpin_reset(bool_t state) {

-

-}

-

-/**

- * @brief   Set the lcd back-light level.

- *

- * @param[in] percent		0 to 100%

- * 

- * @notapi

- */

-static inline void set_backlight(uint8_t percent) {

-	//duty_cycle is 00..FF

-	//Work in progress: the SSD1963 has a built-in PWM, its output can

-	//be used by a Dynamic Background Control or by a host (user)

-	//Check your LCD's hardware, the PWM connection is default left open and instead

-	//connected to a LED connection on the breakout board

-	write_index(SSD1963_SET_PWM_CONF);//set PWM for BackLight

-	write_data(0x0001);

-	write_data(percent & 0x00FF);

-	write_data(0x0001);//controlled by host (not DBC), enabled

-	write_data(0x00FF);

-	write_data(0x0060);//don't let it go too dark, avoid a useless LCD

-	write_data(0x000F);//prescaler ???

-}

-

-/**

- * @brief   Take exclusive control of the bus

- *

- * @notapi

- */

-static inline void acquire_bus(void) {

-	/* Nothing to do here */

-}

-

-/**

- * @brief   Release exclusive control of the bus

- *

- * @notapi

- */

-static inline void release_bus(void) {

-	/* Nothing to do here */

-}

-

-__inline void write_stream(uint16_t *buffer, uint16_t size) {

-	uint16_t i;

-	Set_CS; Clr_RS; Set_WR; Clr_RD;

-	for(i = 0; i < size; i++) {

-		Set_WR;

-		palWritePort(GDISP_DATA_PORT, buffer[i]);

-		Clr_WR;

-	}

-	Clr_CS;

-}

-

-__inline void read_stream(uint16_t *buffer, size_t size) {

-	uint16_t i;

-	Set_CS; Clr_RS; Clr_WR; Set_RD;

-	for(i = 0; i < size; i++) {

-		Set_RD;

-		buffer[i] = palReadPort(GDISP_DATA_PORT);

-		Clr_RD;

-	}

-}

-

-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)

-/**

- * @brief   Read data from the lcd.

- *

- * @return	The data from the lcd

- * @note	The chip select may need to be asserted/de-asserted

- * 			around the actual spi read

- * 

- * @notapi

- */

-static inline uint16_t read_data(void) {

-	Set_CS; Clr_RS; Clr_WR; Set_RD;

-	uint16_t data = palReadPort(GDISP_DATA_PORT); 

-	Clr_CS;

-	return data;

-}

-#endif

-

-#endif /* _GDISP_LLD_BOARD_H */

-/** @} */

diff --git a/drivers/gdisp/SSD1963/gdisp_lld_panel.h b/drivers/gdisp/SSD1963/gdisp_lld_panel.h
deleted file mode 100644
index 5fa126c8..00000000
--- a/drivers/gdisp/SSD1963/gdisp_lld_panel.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-    ChibiOS/GFX Copyright (C) 2012, 2013
-			Joel Bodenmann aka Tectu <joel@unormal.org>
-
-    This file is part of ChibiOS/GFX.
-
-    ChibiOS/GFX is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 3 of the License, or
-    (at your option) any later version.
-
-    ChibiOS/GFX is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file    SSD1963/gdisp_lld_panel.h
- * @brief   TFT LCD panel properties.
- *
- * @addtogroup GDISP
- * @{
- */
-
-#ifndef _GDISP_LLD_PANEL_H
-#define _GDISP_LLD_PANEL_H
-
-/* LCD panel specs */
-#define GDISP_SCREEN_WIDTH 800
-#define GDISP_SCREEN_HEIGHT 480
-
-/* The timings need to follow the datasheet for your particular TFT/LCD screen (the actual screen, not the controller)
-*** Datasheets normally use a specific set of timings and acronyms, their value refers to the number of pixel clocks
-** Non-display periods refer to pulses/timings that occur before or after the timings that actually put pixels on the screen
-** Display periods refer to pulses/timings that directly put pixels on the screen
-HDP: Horizontal Display Period, normally the width - 1
-HT: Horizontal Total period (display + non-display)
-HPS: non-display period between the start of the horizontal sync (LLINE) signal and the first display data
-LPS: horizontal sync pulse (LLINE) start location in pixel clocks
-HPW: Horizontal sync Pulse Width
-VDP: Vertical Display period, normally height - 1
-VT: Vertical Total period (display + non-display)
-VPS: non-display period in lines between the start of the frame and the first display data in number of lines
-FPS: vertical sync pulse (LFRAME) start location in lines. 
-VPW: Vertical sync Pulse Width
-
-*** Here's how to convert them:
-HPS = SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH
-HT - HPS = GDISP_SCREEN_WIDTH + SCREEN_HSYNC_FRONT_PORCH
-=> 	SCREEN_HSYNC_FRONT_PORCH = ( HT - HPS ) - GDISP_SCREEN_WIDTH
-	SCREEN_HSYNC_PULSE = HPW
-	SCREEN_HSYNC_BACK_PORCH = HPS - HPW
-	SCREEN_HSYNC_PERIOD = HT
-	
-VPS = SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH
-VT - VPS = GDISP_SCREEN_HEIGHT + SCREEN_VSYNC_FRONT_PORCH
-=>	SCREEN_VSYNC_FRONT_PORCH = ( VT - VPS ) - GDISP_SCREEN_HEIGHT
-	SCREEN_VSYNC_PULSE = VPW
-	SCREEN_VSYNC_BACK_PORCH = VPS - LPS
-	SCREEN_VSYNC_PERIOD = VT
-*/
-
-//The following values are for a 5" TFT LCD
-#define SCREEN_HSYNC_BACK_PORCH		43
-#define SCREEN_HSYNC_FRONT_PORCH	149
-#define SCREEN_HSYNC_PULSE			8
-
-#define SCREEN_VSYNC_BACK_PORCH		21
-#define SCREEN_VSYNC_FRONT_PORCH	26
-#define SCREEN_VSYNC_PULSE			3
-
-
-#define SCREEN_HSTART_POSITION	3	//Horizontal Display Period Start Position
-#define SCREEN_VSTART_POSITION	23	//Vertical Display Period Start Position
-
-#define	SCREEN_HSYNC_PERIOD	(SCREEN_HSYNC_PULSE + SCREEN_HSYNC_BACK_PORCH + GDISP_SCREEN_WIDTH  + SCREEN_HSYNC_FRONT_PORCH)
-#define	SCREEN_VSYNC_PERIOD	(SCREEN_VSYNC_PULSE + SCREEN_VSYNC_BACK_PORCH + GDISP_SCREEN_HEIGHT + SCREEN_VSYNC_FRONT_PORCH)
-
-#endif
-/** @} */
-