aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/gdisp/Nokia6610GE12/gdisp_lld.c547
-rw-r--r--drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h90
-rw-r--r--drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h18
-rw-r--r--drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h11
-rw-r--r--drivers/gdisp/Nokia6610GE8/gdisp_lld.c46
5 files changed, 256 insertions, 456 deletions
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld.c b/drivers/gdisp/Nokia6610GE12/gdisp_lld.c
index a991a9a6..441ac82d 100644
--- a/drivers/gdisp/Nokia6610GE12/gdisp_lld.c
+++ b/drivers/gdisp/Nokia6610GE12/gdisp_lld.c
@@ -17,17 +17,6 @@
#if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/
-/* Include the emulation code for things we don't support */
-#include "gdisp/lld/emulation.c"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/* Controller definitions */
-#include "GE12.h"
-
-/* This controller is only ever used with a 132 x 132 display */
#if defined(GDISP_SCREEN_HEIGHT)
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
#undef GDISP_SCREEN_HEIGHT
@@ -36,11 +25,43 @@
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
#undef GDISP_SCREEN_WIDTH
#endif
-#define GDISP_SCREEN_HEIGHT 132
-#define GDISP_SCREEN_WIDTH 132
-#define GDISP_INITIAL_CONTRAST 38
-#define GDISP_INITIAL_BACKLIGHT 100
+#define GDISP_LLD_DECLARATIONS
+#include "gdisp/lld/gdisp_lld.h"
+#include "gdisp_lld_board.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#include "GE12.h"
+
+#define GDISP_SCAN_LINES 132
+#define GDISP_SLEEP_SIZE 32 /* Sleep mode window lines - this must be 32 on this controller */
+
+// Set parameters if they are not already set
+#ifndef GDISP_SCREEN_HEIGHT
+ #define GDISP_SCREEN_HEIGHT 130
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+ #define GDISP_SCREEN_WIDTH 130
+#endif
+#ifndef GDISP_RAM_X_OFFSET
+ #define GDISP_RAM_X_OFFSET 0 /* Offset in RAM of visible area */
+#endif
+#ifndef GDISP_RAM_Y_OFFSET
+ #define GDISP_RAM_Y_OFFSET 2 /* Offset in RAM of visible area */
+#endif
+#endif
+#ifndef GDISP_SLEEP_POS
+ #define GDISP_SLEEP_POS ((GDISP_SCAN_LINES-GDISP_SLEEP_SIZE)/2 & ~3)
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+ #define GDISP_INITIAL_CONTRAST 50
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+ #define GDISP_INITIAL_BACKLIGHT 100
+#endif
/*===========================================================================*/
/* Driver exported variables. */
@@ -50,12 +71,14 @@
/* Driver local variables. */
/*===========================================================================*/
+static color_t savecolor;
+
+#define GDISP_FLG_ODDBYTE (GDISP_FLG_DRIVER<<0)
+
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
-#include "gdisp_lld_board.h"
-
// Some macros just to make reading the code easier
#define delayms(ms) gfxSleepMilliseconds(ms)
#define write_data2(d1, d2) { write_data(d1); write_data(d2); }
@@ -64,33 +87,11 @@
#define write_cmd2(cmd, d1, d2) { write_cmd(cmd); write_data2(d1, d2); }
#define write_cmd3(cmd, d1, d2, d3) { write_cmd(cmd); write_data3(d1, d2, d3); }
-// A very common thing to do.
-// An inline function has been used here incase the parameters have side effects with the internal calculations.
-static inline void setviewport(coord_t x, coord_t y, coord_t cx, coord_t cy) {
- write_cmd2(CASET, x, x+cx-1); // Column address set
- write_cmd2(PASET, y, y+cy-1); // Page address set
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
-/* ---- Required Routines ---- */
-/*
- The following 2 routines are required.
- All other routines are optional.
-*/
-
-/**
- * @brief Low level GDISP driver initialization.
- *
- * @notapi
- */
-bool_t gdisp_lld_init(void) {
+LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) {
/* Initialise your display */
init_board();
@@ -100,402 +101,142 @@ bool_t gdisp_lld_init(void) {
setpin_reset(FALSE);
delayms(20);
- // Get the bus for the following initialisation commands
acquire_bus();
-
- // UNTESTED
- #if 1
- write_cmd(SLEEPOUT); // Sleep out
- write_cmd(INVON); // Inversion on: seems to be required for this controller
- write_cmd1(COLMOD, 0x03); // Color Interface Pixel Format - 0x03 = 12 bits-per-pixel
- write_cmd1(MADCTL, 0xC8); // Memory access controler - 0xC0 = mirror x and y, reverse rgb
- write_cmd1(SETCON, GDISP_INITIAL_CONTRAST); // Write contrast
- delayms(20);
- write_cmd(DISPON); // Display On
- #else
- // Alternative
- write_cmd(SOFTRST); // Software Reset
- delayms(20);
- write_cmd(INITESC); // Initial escape
- delayms(20);
- write_cmd1(REFSET, 0x00); // Refresh set
- write_cmd(DISPCTRL); // Set Display control - really 7 bytes of data
- write_data(128); // Set the lenght of one selection term
- write_data(128); // Set N inversion -> no N inversion
- write_data(134); // Set frame frequence and bias rate -> 2 devision of frequency and 1/8 bias, 1/67 duty, 96x67 size
- write_data(84); // Set duty parameter
- write_data(69); // Set duty parameter
- write_data(82); // Set duty parameter
- write_data(67); // Set duty parameter
- write_cmd(GRAYSCALE0); // Grey scale 0 position set - really 15 bytes of data
- write_data(1); // GCP1 - gray lavel to be output when the RAM data is "0001"
- write_data(2); // GCP2 - gray lavel to be output when the RAM data is "0010"
- write_data(4); // GCP3 - gray lavel to be output when the RAM data is "0011"
- write_data(8); // GCP4 - gray lavel to be output when the RAM data is "0100"
- write_data(16); // GCP5 - gray lavel to be output when the RAM data is "0101"
- write_data(30); // GCP6 - gray lavel to be output when the RAM data is "0110"
- write_data(40); // GCP7 - gray lavel to be output when the RAM data is "0111"
- write_data(50); // GCP8 - gray lavel to be output when the RAM data is "1000"
- write_data(60); // GCP9 - gray lavel to be output when the RAM data is "1001"
- write_data(70); // GCP10 - gray lavel to be output when the RAM data is "1010"
- write_data(80); // GCP11 - gray lavel to be output when the RAM data is "1011"
- write_data(90); // GCP12 - gray lavel to be output when the RAM data is "1100"
- write_data(100); // GCP13 - gray lavel to be output when the RAM data is "1101"
- write_data(110); // GCP14 - gray lavel to be output when the RAM data is "1110"
- write_data(127); // GCP15 - gray lavel to be output when the RAM data is "1111"
- write_cmd1(GAMMA, 0x01); // Gamma curve set - select gray scale - GRAYSCALE 0 or GREYSCALE 1 - Select grey scale 0
- write_cmd1(COMMONDRV, 0x00); // Command driver output - Set COM1-COM41 side come first, normal mod
- write_cmd(NORMALMODE); // Set Normal mode (my)
- // write_cmd(INVERSIONOFF); // Inversion off
- write_cmd2(COLADDRSET, 0, 131); // Column address set
- write_cmd2(PAGEADDRSET, 0, 131); // Page address set
- write_cmd1(ACCESSCTRL, 0x40); // Memory access controler - 0x40 horizontal
- // write_data(0x20); // vertical
- write_cmd1(PWRCTRL, 0x04); // Power control - Internal resistance, V1OUT -> high power mode, oscilator devision rate
- write_cmd(SLEEPOUT); // Sleep out
- write_cmd(VOLTCTRL); // Voltage control - voltage control and write contrast define LCD electronic volume
- // write_data(0x7f); // full voltage control
- // write_data(0x03); // must be "1"
- write_cmd1(CONTRAST, GDISP_INITIAL_CONTRAST); // Write contrast
- delayms(20);
- write_cmd(TEMPGRADIENT); // Temperature gradient - really 14 bytes of data
- for(i=0; i<14; i++)
- write_data(0);
- write_cmd(BOOSTVON); // Booster voltage ON
- write_cmd(DISPLAYON); // Finally - Display On
- #endif
-
- // Release the bus
+ write_cmd(SLEEPOUT); // Sleep out
+ write_cmd1(COLMOD, 0x03); // Color Interface Pixel Format - 0x03 = 12 bits-per-pixel
+ write_cmd1(MADCTL, 0x00); // Memory access controller
+ write_cmd1(SETCON, 127*GDISP_INITIAL_CONTRAST/100-64); // Write contrast
+ delayms(20);
release_bus();
/* Turn on the back-light */
set_backlight(GDISP_INITIAL_BACKLIGHT);
/* Initialise the GDISP structure to match */
- GDISP.Width = GDISP_SCREEN_WIDTH;
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Orientation = GDISP_ROTATE_0;
- GDISP.Powermode = powerOn;
- GDISP.Backlight = GDISP_INITIAL_BACKLIGHT;
- GDISP.Contrast = GDISP_INITIAL_CONTRAST;
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- GDISP.clipx0 = 0;
- GDISP.clipy0 = 0;
- GDISP.clipx1 = GDISP.Width;
- GDISP.clipy1 = GDISP.Height;
- #endif
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Orientation = GDISP_ROTATE_0;
+ g->g.Powermode = powerOn;
+ g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+ g->g.Contrast = GDISP_INITIAL_CONTRAST;
return TRUE;
}
-/**
- * @brief Draws a pixel on the display.
- *
- * @param[in] x X location of the pixel
- * @param[in] y Y location of the pixel
- * @param[in] color The color of the pixel
- *
- * @notapi
- */
-void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) {
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- #endif
- acquire_bus();
- setviewport(x, y, 1, 1);
- write_cmd3(RAMWR, 0, (color>>8) & 0x0F, color & 0xFF);
- release_bus();
-}
-
-/* ---- Optional Routines ---- */
-
-#if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__)
- /**
- * @brief Fill an area with a color.
- *
- * @param[in] x, y The start filled area
- * @param[in] cx, cy The width and height to be filled
- * @param[in] color The color of the fill
- *
- * @notapi
- */
- void gdisp_lld_fill_area(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) {
- unsigned i, tuples;
-
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }
- if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }
- if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
- if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
- #endif
-
- tuples = (cx*cy+1)/2; // With an odd sized area we over-print by one pixel.
- // This extra pixel is ignored by the controller.
-
+#if GDISP_HARDWARE_STREAM_WRITE
+ LLDSPEC void gdisp_lld_write_start(GDISPDriver *g) {
acquire_bus();
- setviewport(x, y, cx, cy);
+ write_cmd2(CASET, GDISP_RAM_X_OFFSET+g->p.x, GDISP_RAM_X_OFFSET+g->p.x+g->p.cx-1); // Column address set
+ write_cmd2(PASET, GDISP_RAM_Y_OFFSET+g->p.y, GDISP_RAM_Y_OFFSET+g->p.y+g->p.cy-1); // Page address set
write_cmd(RAMWR);
- for(i=0; i < tuples; i++)
- write_data3(((color >> 4) & 0xFF), (((color << 4) & 0xF0)|((color >> 8) & 0x0F)), (color & 0xFF));
- release_bus();
- }
-#endif
-
-#if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__)
- /**
- * @brief Fill an area with a bitmap.
- *
- * @param[in] x, y The start filled area
- * @param[in] cx, cy The width and height to be filled
- * @param[in] srcx, srcy The bitmap position to start the fill from
- * @param[in] srccx The width of a line in the bitmap.
- * @param[in] buffer The pixels to use to fill the area.
- *
- * @notapi
- */
- void gdisp_lld_blit_area_ex(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) {
- coord_t endx, endy, lg;
- color_t c1, c2;
- #if GDISP_PACKED_PIXELS
- coord_t pos;
- const uint8_t *p;
- #endif
-
- #if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP
- if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; }
- if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; }
- if (srcx+cx > srccx) cx = srccx - srcx;
- if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;
- if (x+cx > GDISP.clipx1) cx = GDISP.clipx1 - x;
- if (y+cy > GDISP.clipy1) cy = GDISP.clipy1 - y;
- #endif
-
- /* What are our end points */
- endx = srcx + cx;
- endy = y + cy;
-
- acquire_bus();
- setviewport(x, y, cx, cy);
- write_cmd(RAMWR);
-
- #if !GDISP_PACKED_PIXELS
- // Although this controller uses packed pixels we support unpacked pixel
- // formats in this blit by packing the data as we feed it to the controller.
- lg = srccx - cx;
- buffer += srcy * srccx + srcx;
- x = srcx;
- while (1) {
- /* Get a pixel */
- c1 = *buffer++;
- if (++x >= endx) {
- if (++y >= endy) {
- /* Odd pixel at end */
- write_data3(0, ((c1 >> 8) & 0x0F), (c1 & 0xFF));
- break;
- }
- x = srcx;
- buffer += lg;
- }
- /* Get the next pixel */
- c2 = *buffer++;
- write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF));
- if (++x >= endx) {
- if (++y >= endy)
- break;
- x = srcx;
- buffer += lg;
- }
- }
-
- #else
-
- // Although this controller uses packed pixels, we may have to feed it into
- // the controller with different packing to the source bitmap
- #if !GDISP_PACKED_LINES
- srccx = (srccx + 1) & ~1;
- #endif
- pos = srcy*srccx;
- lg = (srccx - cx)/2*3;
- p = ((const uint8_t *)buffer) + ((pos+srcx)/2 * 3);
-
- x = srcx;
- while (1) {
- /* Get a pixel */
- switch((pos+x)&1) {
- case 0: c1 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break;
- case 1: c1 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break;
- }
- if (++x >= endx) {
- if (++y >= endy) {
- /* Odd pixel at end */
- write_data3(0, ((c1 >> 8) & 0x0F), (c1 & 0xFF));
- break;
- }
- x = srcx;
- p += lg;
- pos += srccx;
- }
- /* Get the next pixel */
- switch((pos+x)&1) {
- case 0: c2 = (((color_t)p[0]) << 4)|(((color_t)p[1])>>4); break;
- case 1: c2 = (((color_t)p[1]&0x0F) << 8)|((color_t)p[1]); break;
- }
- write_data3(((c1 >> 4) & 0xFF), (((c1 << 4) & 0xF0)|((c2 >> 8) & 0x0F)), (c2 & 0xFF));
- if (++x >= endx) {
- if (++y >= endy)
- break;
- x = srcx;
- p += lg;
- pos += srccx;
- }
- }
- #endif
- release_bus();
+ g->flags &= ~GDISP_FLG_ODDBYTE;
}
-#endif
-
-#if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD)
- /**
- * @brief Get the color of a particular pixel.
- * @note If x,y is off the screen, the result is undefined.
- *
- * @param[in] x, y The start of the text
- *
- * @notapi
- */
- color_t gdisp_lld_get_pixel_color(coord_t x, coord_t y) {
- /* NOT IMPLEMENTED */
- /* Some board hardware might support this in the future.
- * The Olimex board doesn't.
- */
+ LLDSPEC void gdisp_lld_write_color(GDISPDriver *g) {
+ if ((g->flags & GDISP_FLG_ODDBYTE)) {
+ // Write the pair of pixels to the display
+ write_data3(((savecolor >> 4) & 0xFF), (((savecolor << 4) & 0xF0)|((g->p.color >> 8) & 0x0F)), (g->p.color & 0xFF));
+ g->flags &= ~GDISP_FLG_ODDBYTE;
+ } else {
+ savecolor = g->p.color;
+ g->flags |= GDISP_FLG_ODDBYTE;
+ }
}
-#endif
-
-#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL)
- /**
- * @brief Scroll vertically a section of the screen.
- * @note If x,y + cx,cy is off the screen, the result is undefined.
- * @note If lines is >= cy, it is equivelent to a area fill with bgcolor.
- *
- * @param[in] x, y The start of the area to be scrolled
- * @param[in] cx, cy The size of the area to be scrolled
- * @param[in] lines The number of lines to scroll (Can be positive or negative)
- * @param[in] bgcolor The color to fill the newly exposed area.
- *
- * @notapi
- */
- void gdisp_lld_vertical_scroll(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) {
- /* NOT IMPLEMENTED */
- /* The hardware seems capable of doing this.
- * It is just really complex so we leave it out for now.
- */
+ LLDSPEC void gdisp_lld_write_stop(GDISPDriver *g) {
+ if ((g->flags & GDISP_FLG_ODDBYTE)) {
+ write_data2(((savecolor >> 4) & 0xFF), ((savecolor << 4) & 0xF0));
+ write_cmd(NOP);
+ }
+ release_bus();
}
#endif
-#if GDISP_HARDWARE_CONTROL || defined(__DOXYGEN__)
- /**
- * @brief Driver Control
- * @details Unsupported control codes are ignored.
- * @note The value parameter should always be typecast to (void *).
- * @note There are some predefined and some specific to the low level driver.
- * @note GDISP_CONTROL_POWER - Takes a gdisp_powermode_t
- * GDISP_CONTROL_ORIENTATION - Takes a gdisp_orientation_t
- * GDISP_CONTROL_BACKLIGHT - Takes an int from 0 to 100. For a driver
- * that only supports off/on anything other
- * than zero is on.
- * GDISP_CONTROL_CONTRAST - Takes an int from 0 to 100.
- * GDISP_CONTROL_LLD - Low level driver control constants start at
- * this value.
- *
- * @param[in] what What to do.
- * @param[in] value The value to use (always cast to a void *).
- *
- * @notapi
- */
- void gdisp_lld_control(unsigned what, void *value) {
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+ LLDSPEC void gdisp_lld_control(GDISPDriver *g) {
/* The hardware is capable of supporting...
- * GDISP_CONTROL_POWER - not implemented yet
- * GDISP_CONTROL_ORIENTATION - not implemented yet
- * GDISP_CONTROL_BACKLIGHT - supported (the OlimexSAM7EX256 board.h currently only implements off/on although PWM is supported by the hardware)
+ * GDISP_CONTROL_POWER - supported
+ * GDISP_CONTROL_ORIENTATION - supported
+ * GDISP_CONTROL_BACKLIGHT - supported
* GDISP_CONTROL_CONTRAST - supported
*/
- switch(what) {
-#if 0
- // NOT IMPLEMENTED YET
+ switch(g->p.x) {
case GDISP_CONTROL_POWER:
- if (GDISP.Powermode == (gdisp_powermode_t)value)
+ if (g->g.Powermode == (powermode_t)g->p.ptr)
+ return;
+ switch((powermode_t)g->p.ptr) {
+ case powerOff:
+ acquire_bus();
+ write_cmd(SLEEPIN);
+ release_bus();
+ break;
+ case powerOn:
+ acquire_bus();
+ write_cmd(SLEEPOUT);
+ delayms(20);
+ write_cmd(NORON); // Set Normal mode (my)
+ release_bus();
+ break;
+ case powerSleep:
+ acquire_bus();
+ write_cmd(SLEEPOUT);
+ delayms(20);
+ write_cmd2(PTLAR, GDISP_SLEEP_POS, GDISP_SLEEP_POS+GDISP_SLEEP_SIZE)
+ write_cmd(PTLON);
+ release_bus();
+ break;
+ default:
return;
- switch((gdisp_powermode_t)value) {
- case powerOff:
- // Code here
- break;
- case powerOn:
- // Code here
- /* You may need this ---
- * if (GDISP.Powermode != powerSleep)
- * gdisp_lld_init();
- */
- break;
- case powerSleep:
- /* Code here */
- break;
- default:
- return;
}
- GDISP.Powermode = (gdisp_powermode_t)value;
+ g->g.Powermode = (powermode_t)g->p.ptr;
return;
-#endif
-#if 0
- // NOT IMPLEMENTED YET
+
case GDISP_CONTROL_ORIENTATION:
- if (GDISP.Orientation == (gdisp_orientation_t)value)
+ if (g->g.Orientation == (orientation_t)g->p.ptr)
+ return;
+ switch((orientation_t)g->p.ptr) {
+ case GDISP_ROTATE_0:
+ acquire_bus();
+ write_cmd1(MADCTL, 0x00);
+ release_bus();
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ break;
+ case GDISP_ROTATE_90:
+ acquire_bus();
+ write_cmd1(MADCTL, 0xA0); // MY, MX, V, LAO, RGB, X, X, X
+ release_bus();
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
+ break;
+ case GDISP_ROTATE_180:
+ acquire_bus();
+ write_cmd1(MADCTL, 0xC0);
+ release_bus();
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ break;
+ case GDISP_ROTATE_270:
+ acquire_bus();
+ write_cmd1(MADCTL, 0x60);
+ release_bus();
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
+ break;
+ default:
return;
- // WriteSpiData(0x48); // no mirror Y (temporary to satisfy Olimex bmptoarray utility)
- // WriteSpiData(0xC8); // restore to (mirror x and y, reverse rgb)
- switch((gdisp_orientation_t)value) {
- case GDISP_ROTATE_0:
- // Code here
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- // Code here
- GDISP.Height = GDISP_SCREEN_WIDTH;
- GDISP.Width = GDISP_SCREEN_HEIGHT;
- break;
- case GDISP_ROTATE_180:
- // Code here
- GDISP.Height = GDISP_SCREEN_HEIGHT;
- GDISP.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_270:
- // Code here
- GDISP.Height = GDISP_SCREEN_WIDTH;
- GDISP.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
}
- #if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION
- GDISP.clipx0 = 0;
- GDISP.clipy0 = 0;
- GDISP.clipx1 = GDISP.Width;
- GDISP.clipy1 = GDISP.Height;
- #endif
- GDISP.Orientation = (gdisp_orientation_t)value;
+ g->g.Orientation = (orientation_t)g->p.ptr;
return;
-#endif
+
case GDISP_CONTROL_BACKLIGHT:
- if ((unsigned)value > 100) value = (void *)100;
- set_backlight((unsigned)value);
- GDISP.Backlight = (unsigned)value;
+ if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100;
+ set_backlight((unsigned)g->p.ptr);
+ g->g.Backlight = (unsigned)g->p.ptr;
return;
case GDISP_CONTROL_CONTRAST:
- if ((unsigned)value > 100) value = (void *)100;
+ if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100;
acquire_bus();
- write_cmd1(CONTRAST,(unsigned)value);
+ write_cmd1(CONTRAST,(unsigned)127*g->p.ptr/100-64);
release_bus();
- GDISP.Contrast = (unsigned)value;
+ g->g.Contrast = (unsigned)g->p.ptr;
return;
}
}
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h
index ce0f7362..c8215c75 100644
--- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h
+++ b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h
@@ -1,12 +1,12 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://ugfx.org/license.html
+ */
/**
- * @file drivers/gdisp/Nokia6610GE12/gdisp_lld_board_olimexsam7ex256.h
+ * @file drivers/gdisp/Nokia6610GE8/gdisp_lld_board_olimexsam7ex256.h
* @brief GDISP Graphic Driver subsystem board interface for the Olimex SAM7-EX256 board.
*
* @addtogroup GDISP
@@ -16,14 +16,46 @@
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
+/*
+ * Set various display properties. These properties mostly depend on the exact controller chip you get.
+ * The defaults should work for most controllers.
+ */
+//#define GDISP_SCREEN_HEIGHT 130 // The visible display height
+//#define GDISP_SCREEN_WIDTH 130 // The visible display width
+//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area
+//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area
+//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display
+//#define GDISP_INITIAL_CONTRAST 50 // The initial contrast percentage
+//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage
+
// ******************************************************
// Pointers to AT91SAM7X256 peripheral data structures
// ******************************************************
-volatile AT91PS_PIO pPIOA = AT91C_BASE_PIOA;
-volatile AT91PS_PIO pPIOB = AT91C_BASE_PIOB;
-volatile AT91PS_SPI pSPI = AT91C_BASE_SPI0;
-volatile AT91PS_PMC pPMC = AT91C_BASE_PMC;
-volatile AT91PS_PDC pPDC = AT91C_BASE_PDC_SPI0;
+static volatile AT91PS_PIO pPIOA = AT91C_BASE_PIOA;
+static volatile AT91PS_PIO pPIOB = AT91C_BASE_PIOB;
+static volatile AT91PS_SPI pSPI = AT91C_BASE_SPI0;
+static volatile AT91PS_PMC pPMC = AT91C_BASE_PMC;
+static volatile AT91PS_PDC pPDC = AT91C_BASE_PDC_SPI0;
+
+/* The PWM backlight control is non-linear on this board.
+ * We pick values here that make it look a bit more linear.
+ */
+#define PWM_TOP_VALUE 500
+#define PWM_BOTTOM_VALUE 200
+
+#define PWM_VALUE(x) (PWM_BOTTOM_VALUE+(PWM_TOP_VALUE-PWM_BOTTOM_VALUE)*(x)/100)
+
+/* PWM configuration structure. The LCD Backlight is on PWM1/PB20 ie PWM2/PIN1 in ChibiOS speak */
+static const PWMConfig pwmcfg = {
+ 1000000, /* 1 MHz PWM clock frequency. Ignored as we are using PWM_MCK_DIV_n */
+ 1000, /* PWM period is 1000 cycles. */
+ NULL,
+ {
+ {PWM_MCK_DIV_1 | PWM_OUTPUT_ACTIVE_HIGH | PWM_OUTPUT_PIN1 | PWM_DISABLEPULLUP_PIN1, NULL},
+ },
+};
+
+static bool_t pwmRunning = FALSE;
/**
* @brief Initialise the board for the display.
@@ -78,14 +110,14 @@ static inline void init_board(void) {
pPMC->PMC_PCER = 1 << AT91C_ID_SPI0;
// Fixed mode
- pSPI->SPI_CR = 0x81; //SPI Enable, Sowtware reset
+ pSPI->SPI_CR = 0x81; //SPI Enable, Software reset
pSPI->SPI_CR = 0x01; //SPI Enable
+ pSPI->SPI_MR = 0xE0011; //Master mode, fixed select, disable decoder, PCS=1110
+ pSPI->SPI_CSR[0] = 0x01010311; //9bit, CPOL=1, ClockPhase=0, SCLK = 48Mhz/3 = 16MHz
- //pSPI->SPI_MR = 0xE0019; //Master mode, fixed select, disable decoder, FDIV=1 (MCK), PCS=1110
- pSPI->SPI_MR = 0xE0011; //Master mode, fixed select, disable decoder, FDIV=0 (MCK), PCS=1110
-
- //pSPI->SPI_CSR[0] = 0x01010C11; //9bit, CPOL=1, ClockPhase=0, SCLK = 48Mhz/32*12 = 125kHz
- pSPI->SPI_CSR[0] = 0x01010311; //9bit, CPOL=1, ClockPhase=0, SCLK = 48Mhz/8 = 6MHz if using commented MR line above
+ /* Display backlight control at 100% */
+ pwmRunning = FALSE;
+ palSetPad(IOPORT2, PIOB_LCD_BL);
}
/**
@@ -113,10 +145,28 @@ static inline void setpin_reset(bool_t state) {
* @notapi
*/
static inline void set_backlight(uint8_t percent) {
- if (percent)
+ if (percent == 100) {
+ /* Turn the pin on - No PWM */
+ if (pwmRunning) {
+ pwmStop(&PWMD2);
+ pwmRunning = FALSE;
+ }
palSetPad(IOPORT2, PIOB_LCD_BL);
- else
+ } else if (percent == 0) {
+ /* Turn the pin off - No PWM */
+ if (pwmRunning) {
+ pwmStop(&PWMD2);
+ pwmRunning = FALSE;
+ }
palClearPad(IOPORT2, PIOB_LCD_BL);
+ } else {
+ /* Use the PWM */
+ if (!pwmRunning) {
+ pwmStart(&PWMD2, &pwmcfg);
+ pwmRunning = TRUE;
+ }
+ pwmEnableChannel(&PWMD2, 0, PWM_VALUE(percent));
+ }
}
/**
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h
index a1fa6050..d3594434 100644
--- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h
+++ b/drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h
@@ -6,8 +6,8 @@
*/
/**
- * @file drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h
- * @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE8 display.
+ * @file drivers/gdisp/Nokia6610GE12/gdisp_lld_board_template.h
+ * @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE12 display.
*
* @addtogroup GDISP
* @{
@@ -16,6 +16,18 @@
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
+/*
+ * Set various display properties. These properties mostly depend on the exact controller chip you get.
+ * The defaults should work for most controllers.
+ */
+//#define GDISP_SCREEN_HEIGHT 130 // The visible display height
+//#define GDISP_SCREEN_WIDTH 130 // The visible display width
+//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area
+//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area
+//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display
+//#define GDISP_INITIAL_CONTRAST 50 // The initial contrast percentage
+//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage
+
/**
* @brief Initialise the board for the display.
* @notes Performs the following functions:
@@ -95,7 +107,7 @@ static inline void write_data(uint16_t data) {
}
-#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
+#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL
/**
* @brief Read data from the lcd.
*
diff --git a/drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h b/drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h
index 57b8b916..edbf3290 100644
--- a/drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h
+++ b/drivers/gdisp/Nokia6610GE12/gdisp_lld_config.h
@@ -23,13 +23,10 @@
/*===========================================================================*/
#define GDISP_DRIVER_NAME "Nokia6610GE12"
-
-#define GDISP_HARDWARE_FILLS TRUE
-#define GDISP_HARDWARE_BITFILLS TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
-
-#define GDISP_SOFTWARE_TEXTFILLDRAW FALSE
-#define GDISP_SOFTWARE_TEXTBLITCOLUMN FALSE
+#define GDISP_DRIVER_STRUCT GDISP_Nokia6610GE12
+
+#define GDISP_HARDWARE_CONTROL TRUE
+#define GDISP_HARDWARE_STREAM_WRITE TRUE
#define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB444
/* This driver supports both packed and unpacked pixel formats and line formats.
diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld.c b/drivers/gdisp/Nokia6610GE8/gdisp_lld.c
index ce0400d1..3f535369 100644
--- a/drivers/gdisp/Nokia6610GE8/gdisp_lld.c
+++ b/drivers/gdisp/Nokia6610GE8/gdisp_lld.c
@@ -518,29 +518,29 @@ LLDSPEC bool_t gdisp_lld_init(GDISPDriver *g) {
return;
acquire_bus();
switch((orientation_t)g->p.ptr) {
- case GDISP_ROTATE_0:
- write_cmd3(DATCTL, 0x00, 0x00, 0x02); // P1: page normal, column normal, scan in column direction
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- write_cmd3(DATCTL, 0x05, 0x00, 0x02); // P1: page reverse, column normal, scan in page direction
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- case GDISP_ROTATE_180:
- write_cmd3(DATCTL, 0x03, 0x00, 0x02); // P1: page reverse, column reverse, scan in column direction
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_270:
- write_cmd3(DATCTL, 0x06, 0x00, 0x02); // P1: page normal, column reverse, scan in page direction
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- release_bus();
- return;
+ case GDISP_ROTATE_0:
+ write_cmd3(DATCTL, 0x00, 0x00, 0x02); // P1: page normal, column normal, scan in column direction
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ break;
+ case GDISP_ROTATE_90:
+ write_cmd3(DATCTL, 0x05, 0x00, 0x02); // P1: page reverse, column normal, scan in page direction
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
+ break;
+ case GDISP_ROTATE_180:
+ write_cmd3(DATCTL, 0x03, 0x00, 0x02); // P1: page reverse, column reverse, scan in column direction
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ break;
+ case GDISP_ROTATE_270:
+ write_cmd3(DATCTL, 0x06, 0x00, 0x02); // P1: page normal, column reverse, scan in page direction
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
+ break;
+ default:
+ release_bus();
+ return;
}
release_bus();
g->g.Orientation = (orientation_t)g->p.ptr;
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-11 05:59:25 +0000