diff options
Diffstat (limited to 'boards/base/Embest-STM32-DMSTF4BB/chibios_board')
4 files changed, 0 insertions, 2594 deletions
diff --git a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.c b/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.c deleted file mode 100644 index c892481a..00000000 --- a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.c +++ /dev/null @@ -1,108 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
- {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
- VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
- {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
- VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
- {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
- VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
-
- return !palReadPad(GPIOB, GPIOB_SD_DETECT);
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
-
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
-
- return !palReadPad(GPIOB, GPIOB_SD_DETECT);
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
-
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.h b/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.h deleted file mode 100644 index 599281ba..00000000 --- a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.h +++ /dev/null @@ -1,1297 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32F4-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_EMBEST_DMSTF4BB
-#define BOARD_NAME "STMicroelectronics STM32F4-Discovery with Embest add-on"
-
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 32768
-#endif
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 8000000
-#endif
-
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 300
-
-/*
- * MCU type as defined in the ST header file stm32f4xx.h.
- */
-#define STM32F40_41xxx
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_PIN1 1
-#define GPIOA_PIN2 2
-#define GPIOA_PIN3 3
-#define GPIOA_LRCK 4
-#define GPIOA_SPC 5
-#define GPIOA_SDO 6
-#define GPIOA_SDI 7
-#define GPIOA_PIN8 8
-#define GPIOA_VBUS_FS 9
-#define GPIOA_OTG_FS_ID 10
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_SWDIO 13
-#define GPIOA_SWCLK 14
-#define GPIOA_PIN15 15
-
-#define GPIOB_PIN0 0
-#define GPIOB_PIN1 1
-#define GPIOB_PIN2 2
-#define GPIOB_SWO 3
-#define GPIOB_PIN4 4
-#define GPIOB_PIN5 5
-#define GPIOB_SCL 6
-#define GPIOB_PIN7 7
-#define GPIOB_PIN8 8
-#define GPIOB_SDA 9
-#define GPIOB_CLK_IN 10
-#define GPIOB_PIN11 11
-#define GPIOB_PIN12 12
-#define GPIOB_PIN13 13
-#define GPIOB_PIN14 14
-#define GPIOB_SD_DETECT 15
-
-#define GPIOC_OTG_FS_POWER_ON 0
-#define GPIOC_PIN1 1
-#define GPIOC_PIN2 2
-#define GPIOC_PDM_OUT 3
-#define GPIOC_PIN4 4
-#define GPIOC_PIN5 5
-#define GPIOC_PIN6 6
-#define GPIOC_MCLK 7
-#define GPIOC_SD_D0 8
-#define GPIOC_SD_D1 9
-#define GPIOC_SD_D2 10
-#define GPIOC_SD_D3 11
-#define GPIOC_SD_CLK 12
-#define GPIOC_PIN13 13
-#define GPIOC_PIN14 14
-#define GPIOC_PIN15 15
-
-#define GPIOD_PIN0 0
-#define GPIOD_PIN1 1
-#define GPIOD_SD_CMD 2
-#define GPIOD_PIN3 3
-#define GPIOD_RESET 4
-#define GPIOD_OVER_CURRENT 5
-#define GPIOD_PIN6 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_PIN11 11
-#define GPIOD_LED4 12
-#define GPIOD_LED3 13
-#define GPIOD_LED5 14
-#define GPIOD_LED6 15
-
-#define GPIOE_INT1 0
-#define GPIOE_INT2 1
-#define GPIOE_PIN2 2
-#define GPIOE_CS_SPI 3
-#define GPIOE_PIN4 4
-#define GPIOE_PIN5 5
-#define GPIOE_PIN6 6
-#define GPIOE_PIN7 7
-#define GPIOE_PIN8 8
-#define GPIOE_PIN9 9
-#define GPIOE_PIN10 10
-#define GPIOE_PIN11 11
-#define GPIOE_PIN12 12
-#define GPIOE_PIN13 13
-#define GPIOE_PIN14 14
-#define GPIOE_PIN15 15
-
-#define GPIOF_PIN0 0
-#define GPIOF_PIN1 1
-#define GPIOF_PIN2 2
-#define GPIOF_PIN3 3
-#define GPIOF_PIN4 4
-#define GPIOF_PIN5 5
-#define GPIOF_PIN6 6
-#define GPIOF_PIN7 7
-#define GPIOF_PIN8 8
-#define GPIOF_PIN9 9
-#define GPIOF_PIN10 10
-#define GPIOF_PIN11 11
-#define GPIOF_PIN12 12
-#define GPIOF_PIN13 13
-#define GPIOF_PIN14 14
-#define GPIOF_PIN15 15
-
-#define GPIOG_PIN0 0
-#define GPIOG_PIN1 1
-#define GPIOG_PIN2 2
-#define GPIOG_PIN3 3
-#define GPIOG_PIN4 4
-#define GPIOG_PIN5 5
-#define GPIOG_PIN6 6
-#define GPIOG_PIN7 7
-#define GPIOG_PIN8 8
-#define GPIOG_PIN9 9
-#define GPIOG_PIN10 10
-#define GPIOG_PIN11 11
-#define GPIOG_PIN12 12
-#define GPIOG_PIN13 13
-#define GPIOG_PIN14 14
-#define GPIOG_PIN15 15
-
-#define GPIOH_OSC_IN 0
-#define GPIOH_OSC_OUT 1
-#define GPIOH_PIN2 2
-#define GPIOH_PIN3 3
-#define GPIOH_PIN4 4
-#define GPIOH_PIN5 5
-#define GPIOH_PIN6 6
-#define GPIOH_PIN7 7
-#define GPIOH_PIN8 8
-#define GPIOH_PIN9 9
-#define GPIOH_PIN10 10
-#define GPIOH_PIN11 11
-#define GPIOH_PIN12 12
-#define GPIOH_PIN13 13
-#define GPIOH_PIN14 14
-#define GPIOH_PIN15 15
-
-#define GPIOI_PIN0 0
-#define GPIOI_PIN1 1
-#define GPIOI_PIN2 2
-#define GPIOI_PIN3 3
-#define GPIOI_PIN4 4
-#define GPIOI_PIN5 5
-#define GPIOI_PIN6 6
-#define GPIOI_PIN7 7
-#define GPIOI_PIN8 8
-#define GPIOI_PIN9 9
-#define GPIOI_PIN10 10
-#define GPIOI_PIN11 11
-#define GPIOI_PIN12 12
-#define GPIOI_PIN13 13
-#define GPIOI_PIN14 14
-#define GPIOI_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - BUTTON (input floating).
- * PA1 - PIN1 (input pullup).
- * PA2 - PIN2 (input pullup).
- * PA3 - PIN3 (input pullup).
- * PA4 - LRCK (alternate 6).
- * PA5 - SPC (alternate 5).
- * PA6 - SDO (alternate 5).
- * PA7 - SDI (alternate 5).
- * PA8 - PIN8 (input pullup).
- * PA9 - VBUS_FS (input floating).
- * PA10 - OTG_FS_ID (alternate 10).
- * PA11 - OTG_FS_DM (alternate 10).
- * PA12 - OTG_FS_DP (alternate 10).
- * PA13 - SWDIO (alternate 0).
- * PA14 - SWCLK (alternate 0).
- * PA15 - PIN15 (input pullup).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
- PIN_MODE_INPUT(GPIOA_PIN1) | \
- PIN_MODE_INPUT(GPIOA_PIN2) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_ALTERNATE(GPIOA_LRCK) | \
- PIN_MODE_ALTERNATE(GPIOA_SPC) | \
- PIN_MODE_ALTERNATE(GPIOA_SDO) | \
- PIN_MODE_ALTERNATE(GPIOA_SDI) | \
- PIN_MODE_INPUT(GPIOA_PIN8) | \
- PIN_MODE_INPUT(GPIOA_VBUS_FS) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_ID) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_LRCK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SPC) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SDO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SDI) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOA_VBUS_FS) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_ID) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_100M(GPIOA_BUTTON) | \
- PIN_OSPEED_100M(GPIOA_PIN1) | \
- PIN_OSPEED_100M(GPIOA_PIN2) | \
- PIN_OSPEED_100M(GPIOA_PIN3) | \
- PIN_OSPEED_100M(GPIOA_LRCK) | \
- PIN_OSPEED_50M(GPIOA_SPC) | \
- PIN_OSPEED_50M(GPIOA_SDO) | \
- PIN_OSPEED_50M(GPIOA_SDI) | \
- PIN_OSPEED_100M(GPIOA_PIN8) | \
- PIN_OSPEED_100M(GPIOA_VBUS_FS) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_ID) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_DM) | \
- PIN_OSPEED_100M(GPIOA_OTG_FS_DP) | \
- PIN_OSPEED_100M(GPIOA_SWDIO) | \
- PIN_OSPEED_100M(GPIOA_SWCLK) | \
- PIN_OSPEED_100M(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOA_LRCK) | \
- PIN_PUPDR_FLOATING(GPIOA_SPC) | \
- PIN_PUPDR_FLOATING(GPIOA_SDO) | \
- PIN_PUPDR_FLOATING(GPIOA_SDI) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOA_VBUS_FS) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_ID) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \
- PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \
- PIN_PUPDR_FLOATING(GPIOA_SWDIO) | \
- PIN_PUPDR_FLOATING(GPIOA_SWCLK) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_PIN1) | \
- PIN_ODR_HIGH(GPIOA_PIN2) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_LRCK) | \
- PIN_ODR_HIGH(GPIOA_SPC) | \
- PIN_ODR_HIGH(GPIOA_SDO) | \
- PIN_ODR_HIGH(GPIOA_SDI) | \
- PIN_ODR_HIGH(GPIOA_PIN8) | \
- PIN_ODR_HIGH(GPIOA_VBUS_FS) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_ID) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \
- PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \
- PIN_ODR_HIGH(GPIOA_SWDIO) | \
- PIN_ODR_HIGH(GPIOA_SWCLK) | \
- PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_PIN1, 0) | \
- PIN_AFIO_AF(GPIOA_PIN2, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_LRCK, 6) | \
- PIN_AFIO_AF(GPIOA_SPC, 5) | \
- PIN_AFIO_AF(GPIOA_SDO, 5) | \
- PIN_AFIO_AF(GPIOA_SDI, 5))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
- PIN_AFIO_AF(GPIOA_VBUS_FS, 0) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_ID, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
- PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_PIN15, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - PIN0 (input pullup).
- * PB1 - PIN1 (input pullup).
- * PB2 - PIN2 (input pullup).
- * PB3 - SWO (alternate 0).
- * PB4 - PIN4 (input pullup).
- * PB5 - PIN5 (input pullup).
- * PB6 - SCL (alternate 4).
- * PB7 - PIN7 (input pullup).
- * PB8 - PIN8 (input pullup).
- * PB9 - SDA (alternate 4).
- * PB10 - CLK_IN (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - SD_DETECT (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
- PIN_MODE_INPUT(GPIOB_PIN1) | \
- PIN_MODE_INPUT(GPIOB_PIN2) | \
- PIN_MODE_ALTERNATE(GPIOB_SWO) | \
- PIN_MODE_INPUT(GPIOB_PIN4) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_ALTERNATE(GPIOB_SCL) | \
- PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_ALTERNATE(GPIOB_SDA) | \
- PIN_MODE_INPUT(GPIOB_CLK_IN) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_SD_DETECT))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_SCL) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOB_CLK_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_SD_DETECT))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_100M(GPIOB_PIN0) | \
- PIN_OSPEED_100M(GPIOB_PIN1) | \
- PIN_OSPEED_100M(GPIOB_PIN2) | \
- PIN_OSPEED_100M(GPIOB_SWO) | \
- PIN_OSPEED_100M(GPIOB_PIN4) | \
- PIN_OSPEED_100M(GPIOB_PIN5) | \
- PIN_OSPEED_100M(GPIOB_SCL) | \
- PIN_OSPEED_100M(GPIOB_PIN7) | \
- PIN_OSPEED_100M(GPIOB_PIN8) | \
- PIN_OSPEED_100M(GPIOB_SDA) | \
- PIN_OSPEED_100M(GPIOB_CLK_IN) | \
- PIN_OSPEED_100M(GPIOB_PIN11) | \
- PIN_OSPEED_100M(GPIOB_PIN12) | \
- PIN_OSPEED_100M(GPIOB_PIN13) | \
- PIN_OSPEED_100M(GPIOB_PIN14) | \
- PIN_OSPEED_100M(GPIOB_SD_DETECT))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOB_SWO) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOB_SCL) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOB_SDA) | \
- PIN_PUPDR_PULLUP(GPIOB_CLK_IN) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_SD_DETECT))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
- PIN_ODR_HIGH(GPIOB_PIN1) | \
- PIN_ODR_HIGH(GPIOB_PIN2) | \
- PIN_ODR_HIGH(GPIOB_SWO) | \
- PIN_ODR_HIGH(GPIOB_PIN4) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_SCL) | \
- PIN_ODR_HIGH(GPIOB_PIN7) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_SDA) | \
- PIN_ODR_HIGH(GPIOB_CLK_IN) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_SD_DETECT))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
- PIN_AFIO_AF(GPIOB_PIN1, 0) | \
- PIN_AFIO_AF(GPIOB_PIN2, 0) | \
- PIN_AFIO_AF(GPIOB_SWO, 0) | \
- PIN_AFIO_AF(GPIOB_PIN4, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_SDA, 4) | \
- PIN_AFIO_AF(GPIOB_CLK_IN, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_SD_DETECT, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - OTG_FS_POWER_ON (output pushpull maximum).
- * PC1 - PIN1 (input pullup).
- * PC2 - PIN2 (input pullup).
- * PC3 - PDM_OUT (input pullup).
- * PC4 - PIN4 (input pullup).
- * PC5 - PIN5 (input pullup).
- * PC6 - PIN6 (input pullup).
- * PC7 - MCLK (alternate 6).
- * PC8 - SD_D0 (alternate 12).
- * PC9 - SD_D1 (alternate 12).
- * PC10 - SD_D2 (alternate 12).
- * PC11 - SD_D3 (alternate 12).
- * PC12 - SD_CLK (alternate 12).
- * PC13 - PIN13 (input pullup).
- * PC14 - PIN14 (input pullup).
- * PC15 - PIN15 (input pullup).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_OTG_FS_POWER_ON) |\
- PIN_MODE_INPUT(GPIOC_PIN1) | \
- PIN_MODE_INPUT(GPIOC_PIN2) | \
- PIN_MODE_INPUT(GPIOC_PDM_OUT) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_INPUT(GPIOC_PIN5) | \
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_ALTERNATE(GPIOC_MCLK) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D0) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D1) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D2) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_D3) | \
- PIN_MODE_ALTERNATE(GPIOC_SD_CLK) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_PIN14) | \
- PIN_MODE_INPUT(GPIOC_PIN15))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_OTG_FS_POWER_ON) |\
- PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PDM_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_MCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D0) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D1) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D2) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_D3) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SD_CLK) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_100M(GPIOC_OTG_FS_POWER_ON) |\
- PIN_OSPEED_100M(GPIOC_PIN1) | \
- PIN_OSPEED_100M(GPIOC_PIN2) | \
- PIN_OSPEED_100M(GPIOC_PDM_OUT) | \
- PIN_OSPEED_100M(GPIOC_PIN4) | \
- PIN_OSPEED_100M(GPIOC_PIN5) | \
- PIN_OSPEED_100M(GPIOC_PIN6) | \
- PIN_OSPEED_100M(GPIOC_MCLK) | \
- PIN_OSPEED_100M(GPIOC_SD_D0) | \
- PIN_OSPEED_100M(GPIOC_SD_D1) | \
- PIN_OSPEED_100M(GPIOC_SD_D2) | \
- PIN_OSPEED_100M(GPIOC_SD_D3) | \
- PIN_OSPEED_100M(GPIOC_SD_CLK) | \
- PIN_OSPEED_100M(GPIOC_PIN13) | \
- PIN_OSPEED_100M(GPIOC_PIN14) | \
- PIN_OSPEED_100M(GPIOC_PIN15))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_OTG_FS_POWER_ON) |\
- PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
- PIN_PUPDR_PULLUP(GPIOC_PDM_OUT) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOC_MCLK) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D0) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D1) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D2) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_D3) | \
- PIN_PUPDR_FLOATING(GPIOC_SD_CLK) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN15))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_OTG_FS_POWER_ON) | \
- PIN_ODR_HIGH(GPIOC_PIN1) | \
- PIN_ODR_HIGH(GPIOC_PIN2) | \
- PIN_ODR_HIGH(GPIOC_PDM_OUT) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_PIN5) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_MCLK) | \
- PIN_ODR_HIGH(GPIOC_SD_D0) | \
- PIN_ODR_HIGH(GPIOC_SD_D1) | \
- PIN_ODR_HIGH(GPIOC_SD_D2) | \
- PIN_ODR_HIGH(GPIOC_SD_D3) | \
- PIN_ODR_HIGH(GPIOC_SD_CLK) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_PIN14) | \
- PIN_ODR_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_OTG_FS_POWER_ON, 0) |\
- PIN_AFIO_AF(GPIOC_PIN1, 0) | \
- PIN_AFIO_AF(GPIOC_PIN2, 0) | \
- PIN_AFIO_AF(GPIOC_PDM_OUT, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN5, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_MCLK, 6))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SD_D0, 12) | \
- PIN_AFIO_AF(GPIOC_SD_D1, 12) | \
- PIN_AFIO_AF(GPIOC_SD_D2, 12) | \
- PIN_AFIO_AF(GPIOC_SD_D3, 12) | \
- PIN_AFIO_AF(GPIOC_SD_CLK, 12) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_PIN14, 0) | \
- PIN_AFIO_AF(GPIOC_PIN15, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - PIN0 (input pullup).
- * PD1 - PIN1 (input pullup).
- * PD2 - SD_CMD (alternate 12).
- * PD3 - PIN3 (input pullup).
- * PD4 - RESET (output pushpull maximum).
- * PD5 - OVER_CURRENT (input floating).
- * PD6 - PIN6 (input pullup).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - PIN11 (input pullup).
- * PD12 - LED4 (output pushpull maximum).
- * PD13 - LED3 (output pushpull maximum).
- * PD14 - LED5 (output pushpull maximum).
- * PD15 - LED6 (output pushpull maximum).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
- PIN_MODE_INPUT(GPIOD_PIN1) | \
- PIN_MODE_ALTERNATE(GPIOD_SD_CMD) | \
- PIN_MODE_INPUT(GPIOD_PIN3) | \
- PIN_MODE_OUTPUT(GPIOD_RESET) | \
- PIN_MODE_INPUT(GPIOD_OVER_CURRENT) | \
- PIN_MODE_INPUT(GPIOD_PIN6) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_INPUT(GPIOD_PIN11) | \
- PIN_MODE_OUTPUT(GPIOD_LED4) | \
- PIN_MODE_OUTPUT(GPIOD_LED3) | \
- PIN_MODE_OUTPUT(GPIOD_LED5) | \
- PIN_MODE_OUTPUT(GPIOD_LED6))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOD_SD_CMD) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_RESET) | \
- PIN_OTYPE_PUSHPULL(GPIOD_OVER_CURRENT) |\
- PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED4) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED3) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED5) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LED6))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_100M(GPIOD_PIN0) | \
- PIN_OSPEED_100M(GPIOD_PIN1) | \
- PIN_OSPEED_100M(GPIOD_SD_CMD) | \
- PIN_OSPEED_100M(GPIOD_PIN3) | \
- PIN_OSPEED_100M(GPIOD_RESET) | \
- PIN_OSPEED_100M(GPIOD_OVER_CURRENT) | \
- PIN_OSPEED_100M(GPIOD_PIN6) | \
- PIN_OSPEED_100M(GPIOD_PIN7) | \
- PIN_OSPEED_100M(GPIOD_PIN8) | \
- PIN_OSPEED_100M(GPIOD_PIN9) | \
- PIN_OSPEED_100M(GPIOD_PIN10) | \
- PIN_OSPEED_100M(GPIOD_PIN11) | \
- PIN_OSPEED_100M(GPIOD_LED4) | \
- PIN_OSPEED_100M(GPIOD_LED3) | \
- PIN_OSPEED_100M(GPIOD_LED5) | \
- PIN_OSPEED_100M(GPIOD_LED6))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOD_SD_CMD) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOD_RESET) | \
- PIN_PUPDR_FLOATING(GPIOD_OVER_CURRENT) |\
- PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOD_LED4) | \
- PIN_PUPDR_FLOATING(GPIOD_LED3) | \
- PIN_PUPDR_FLOATING(GPIOD_LED5) | \
- PIN_PUPDR_FLOATING(GPIOD_LED6))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
- PIN_ODR_HIGH(GPIOD_PIN1) | \
- PIN_ODR_HIGH(GPIOD_SD_CMD) | \
- PIN_ODR_HIGH(GPIOD_PIN3) | \
- PIN_ODR_HIGH(GPIOD_RESET) | \
- PIN_ODR_HIGH(GPIOD_OVER_CURRENT) | \
- PIN_ODR_HIGH(GPIOD_PIN6) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_HIGH(GPIOD_PIN11) | \
- PIN_ODR_LOW(GPIOD_LED4) | \
- PIN_ODR_LOW(GPIOD_LED3) | \
- PIN_ODR_LOW(GPIOD_LED5) | \
- PIN_ODR_LOW(GPIOD_LED6))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
- PIN_AFIO_AF(GPIOD_PIN1, 0) | \
- PIN_AFIO_AF(GPIOD_SD_CMD, 12) | \
- PIN_AFIO_AF(GPIOD_PIN3, 0) | \
- PIN_AFIO_AF(GPIOD_RESET, 0) | \
- PIN_AFIO_AF(GPIOD_OVER_CURRENT, 0) | \
- PIN_AFIO_AF(GPIOD_PIN6, 0) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_PIN11, 0) | \
- PIN_AFIO_AF(GPIOD_LED4, 0) | \
- PIN_AFIO_AF(GPIOD_LED3, 0) | \
- PIN_AFIO_AF(GPIOD_LED5, 0) | \
- PIN_AFIO_AF(GPIOD_LED6, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - INT1 (input floating).
- * PE1 - INT2 (input floating).
- * PE2 - PIN2 (input floating).
- * PE3 - CS_SPI (output pushpull maximum).
- * PE4 - PIN4 (input floating).
- * PE5 - PIN5 (input floating).
- * PE6 - PIN6 (input floating).
- * PE7 - PIN7 (input floating).
- * PE8 - PIN8 (input floating).
- * PE9 - PIN9 (input floating).
- * PE10 - PIN10 (input floating).
- * PE11 - PIN11 (input floating).
- * PE12 - PIN12 (input floating).
- * PE13 - PIN13 (input floating).
- * PE14 - PIN14 (input floating).
- * PE15 - PIN15 (input floating).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_INT1) | \
- PIN_MODE_INPUT(GPIOE_INT2) | \
- PIN_MODE_INPUT(GPIOE_PIN2) | \
- PIN_MODE_OUTPUT(GPIOE_CS_SPI) | \
- PIN_MODE_INPUT(GPIOE_PIN4) | \
- PIN_MODE_INPUT(GPIOE_PIN5) | \
- PIN_MODE_INPUT(GPIOE_PIN6) | \
- PIN_MODE_INPUT(GPIOE_PIN7) | \
- PIN_MODE_INPUT(GPIOE_PIN8) | \
- PIN_MODE_INPUT(GPIOE_PIN9) | \
- PIN_MODE_INPUT(GPIOE_PIN10) | \
- PIN_MODE_INPUT(GPIOE_PIN11) | \
- PIN_MODE_INPUT(GPIOE_PIN12) | \
- PIN_MODE_INPUT(GPIOE_PIN13) | \
- PIN_MODE_INPUT(GPIOE_PIN14) | \
- PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_INT1) | \
- PIN_OTYPE_PUSHPULL(GPIOE_INT2) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOE_CS_SPI) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_100M(GPIOE_INT1) | \
- PIN_OSPEED_100M(GPIOE_INT2) | \
- PIN_OSPEED_100M(GPIOE_PIN2) | \
- PIN_OSPEED_100M(GPIOE_CS_SPI) | \
- PIN_OSPEED_100M(GPIOE_PIN4) | \
- PIN_OSPEED_100M(GPIOE_PIN5) | \
- PIN_OSPEED_100M(GPIOE_PIN6) | \
- PIN_OSPEED_100M(GPIOE_PIN7) | \
- PIN_OSPEED_100M(GPIOE_PIN8) | \
- PIN_OSPEED_100M(GPIOE_PIN9) | \
- PIN_OSPEED_100M(GPIOE_PIN10) | \
- PIN_OSPEED_100M(GPIOE_PIN11) | \
- PIN_OSPEED_100M(GPIOE_PIN12) | \
- PIN_OSPEED_100M(GPIOE_PIN13) | \
- PIN_OSPEED_100M(GPIOE_PIN14) | \
- PIN_OSPEED_100M(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_FLOATING(GPIOE_INT1) | \
- PIN_PUPDR_FLOATING(GPIOE_INT2) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOE_CS_SPI) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_INT1) | \
- PIN_ODR_HIGH(GPIOE_INT2) | \
- PIN_ODR_HIGH(GPIOE_PIN2) | \
- PIN_ODR_HIGH(GPIOE_CS_SPI) | \
- PIN_ODR_HIGH(GPIOE_PIN4) | \
- PIN_ODR_HIGH(GPIOE_PIN5) | \
- PIN_ODR_HIGH(GPIOE_PIN6) | \
- PIN_ODR_HIGH(GPIOE_PIN7) | \
- PIN_ODR_HIGH(GPIOE_PIN8) | \
- PIN_ODR_HIGH(GPIOE_PIN9) | \
- PIN_ODR_HIGH(GPIOE_PIN10) | \
- PIN_ODR_HIGH(GPIOE_PIN11) | \
- PIN_ODR_HIGH(GPIOE_PIN12) | \
- PIN_ODR_HIGH(GPIOE_PIN13) | \
- PIN_ODR_HIGH(GPIOE_PIN14) | \
- PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_INT1, 0) | \
- PIN_AFIO_AF(GPIOE_INT2, 0) | \
- PIN_AFIO_AF(GPIOE_PIN2, 0) | \
- PIN_AFIO_AF(GPIOE_CS_SPI, 0) | \
- PIN_AFIO_AF(GPIOE_PIN4, 0) | \
- PIN_AFIO_AF(GPIOE_PIN5, 0) | \
- PIN_AFIO_AF(GPIOE_PIN6, 0) | \
- PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
- PIN_AFIO_AF(GPIOE_PIN9, 0) | \
- PIN_AFIO_AF(GPIOE_PIN10, 0) | \
- PIN_AFIO_AF(GPIOE_PIN11, 0) | \
- PIN_AFIO_AF(GPIOE_PIN12, 0) | \
- PIN_AFIO_AF(GPIOE_PIN13, 0) | \
- PIN_AFIO_AF(GPIOE_PIN14, 0) | \
- PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - PIN0 (input floating).
- * PF1 - PIN1 (input floating).
- * PF2 - PIN2 (input floating).
- * PF3 - PIN3 (input floating).
- * PF4 - PIN4 (input floating).
- * PF5 - PIN5 (input floating).
- * PF6 - PIN6 (input floating).
- * PF7 - PIN7 (input floating).
- * PF8 - PIN8 (input floating).
- * PF9 - PIN9 (input floating).
- * PF10 - PIN10 (input floating).
- * PF11 - PIN11 (input floating).
- * PF12 - PIN12 (input floating).
- * PF13 - PIN13 (input floating).
- * PF14 - PIN14 (input floating).
- * PF15 - PIN15 (input floating).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \
- PIN_MODE_INPUT(GPIOF_PIN1) | \
- PIN_MODE_INPUT(GPIOF_PIN2) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_PIN4) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_PIN9) | \
- PIN_MODE_INPUT(GPIOF_PIN10) | \
- PIN_MODE_INPUT(GPIOF_PIN11) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_100M(GPIOF_PIN0) | \
- PIN_OSPEED_100M(GPIOF_PIN1) | \
- PIN_OSPEED_100M(GPIOF_PIN2) | \
- PIN_OSPEED_100M(GPIOF_PIN3) | \
- PIN_OSPEED_100M(GPIOF_PIN4) | \
- PIN_OSPEED_100M(GPIOF_PIN5) | \
- PIN_OSPEED_100M(GPIOF_PIN6) | \
- PIN_OSPEED_100M(GPIOF_PIN7) | \
- PIN_OSPEED_100M(GPIOF_PIN8) | \
- PIN_OSPEED_100M(GPIOF_PIN9) | \
- PIN_OSPEED_100M(GPIOF_PIN10) | \
- PIN_OSPEED_100M(GPIOF_PIN11) | \
- PIN_OSPEED_100M(GPIOF_PIN12) | \
- PIN_OSPEED_100M(GPIOF_PIN13) | \
- PIN_OSPEED_100M(GPIOF_PIN14) | \
- PIN_OSPEED_100M(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \
- PIN_ODR_HIGH(GPIOF_PIN1) | \
- PIN_ODR_HIGH(GPIOF_PIN2) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_PIN4) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_PIN9) | \
- PIN_ODR_HIGH(GPIOF_PIN10) | \
- PIN_ODR_HIGH(GPIOF_PIN11) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0) | \
- PIN_AFIO_AF(GPIOF_PIN1, 0) | \
- PIN_AFIO_AF(GPIOF_PIN2, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_PIN4, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_PIN9, 0) | \
- PIN_AFIO_AF(GPIOF_PIN10, 0) | \
- PIN_AFIO_AF(GPIOF_PIN11, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-/*
- * GPIOG setup:
- *
- * PG0 - PIN0 (input floating).
- * PG1 - PIN1 (input floating).
- * PG2 - PIN2 (input floating).
- * PG3 - PIN3 (input floating).
- * PG4 - PIN4 (input floating).
- * PG5 - PIN5 (input floating).
- * PG6 - PIN6 (input floating).
- * PG7 - PIN7 (input floating).
- * PG8 - PIN8 (input floating).
- * PG9 - PIN9 (input floating).
- * PG10 - PIN10 (input floating).
- * PG11 - PIN11 (input floating).
- * PG12 - PIN12 (input floating).
- * PG13 - PIN13 (input floating).
- * PG14 - PIN14 (input floating).
- * PG15 - PIN15 (input floating).
- */
-#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
- PIN_MODE_INPUT(GPIOG_PIN1) | \
- PIN_MODE_INPUT(GPIOG_PIN2) | \
- PIN_MODE_INPUT(GPIOG_PIN3) | \
- PIN_MODE_INPUT(GPIOG_PIN4) | \
- PIN_MODE_INPUT(GPIOG_PIN5) | \
- PIN_MODE_INPUT(GPIOG_PIN6) | \
- PIN_MODE_INPUT(GPIOG_PIN7) | \
- PIN_MODE_INPUT(GPIOG_PIN8) | \
- PIN_MODE_INPUT(GPIOG_PIN9) | \
- PIN_MODE_INPUT(GPIOG_PIN10) | \
- PIN_MODE_INPUT(GPIOG_PIN11) | \
- PIN_MODE_INPUT(GPIOG_PIN12) | \
- PIN_MODE_INPUT(GPIOG_PIN13) | \
- PIN_MODE_INPUT(GPIOG_PIN14) | \
- PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_100M(GPIOG_PIN0) | \
- PIN_OSPEED_100M(GPIOG_PIN1) | \
- PIN_OSPEED_100M(GPIOG_PIN2) | \
- PIN_OSPEED_100M(GPIOG_PIN3) | \
- PIN_OSPEED_100M(GPIOG_PIN4) | \
- PIN_OSPEED_100M(GPIOG_PIN5) | \
- PIN_OSPEED_100M(GPIOG_PIN6) | \
- PIN_OSPEED_100M(GPIOG_PIN7) | \
- PIN_OSPEED_100M(GPIOG_PIN8) | \
- PIN_OSPEED_100M(GPIOG_PIN9) | \
- PIN_OSPEED_100M(GPIOG_PIN10) | \
- PIN_OSPEED_100M(GPIOG_PIN11) | \
- PIN_OSPEED_100M(GPIOG_PIN12) | \
- PIN_OSPEED_100M(GPIOG_PIN13) | \
- PIN_OSPEED_100M(GPIOG_PIN14) | \
- PIN_OSPEED_100M(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR (PIN_PUPDR_FLOATING(GPIOG_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOG_PIN15))
-#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
- PIN_ODR_HIGH(GPIOG_PIN1) | \
- PIN_ODR_HIGH(GPIOG_PIN2) | \
- PIN_ODR_HIGH(GPIOG_PIN3) | \
- PIN_ODR_HIGH(GPIOG_PIN4) | \
- PIN_ODR_HIGH(GPIOG_PIN5) | \
- PIN_ODR_HIGH(GPIOG_PIN6) | \
- PIN_ODR_HIGH(GPIOG_PIN7) | \
- PIN_ODR_HIGH(GPIOG_PIN8) | \
- PIN_ODR_HIGH(GPIOG_PIN9) | \
- PIN_ODR_HIGH(GPIOG_PIN10) | \
- PIN_ODR_HIGH(GPIOG_PIN11) | \
- PIN_ODR_HIGH(GPIOG_PIN12) | \
- PIN_ODR_HIGH(GPIOG_PIN13) | \
- PIN_ODR_HIGH(GPIOG_PIN14) | \
- PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \
- PIN_AFIO_AF(GPIOG_PIN1, 0) | \
- PIN_AFIO_AF(GPIOG_PIN2, 0) | \
- PIN_AFIO_AF(GPIOG_PIN3, 0) | \
- PIN_AFIO_AF(GPIOG_PIN4, 0) | \
- PIN_AFIO_AF(GPIOG_PIN5, 0) | \
- PIN_AFIO_AF(GPIOG_PIN6, 0) | \
- PIN_AFIO_AF(GPIOG_PIN7, 0))
-#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \
- PIN_AFIO_AF(GPIOG_PIN9, 0) | \
- PIN_AFIO_AF(GPIOG_PIN10, 0) | \
- PIN_AFIO_AF(GPIOG_PIN11, 0) | \
- PIN_AFIO_AF(GPIOG_PIN12, 0) | \
- PIN_AFIO_AF(GPIOG_PIN13, 0) | \
- PIN_AFIO_AF(GPIOG_PIN14, 0) | \
- PIN_AFIO_AF(GPIOG_PIN15, 0))
-
-/*
- * GPIOH setup:
- *
- * PH0 - OSC_IN (input floating).
- * PH1 - OSC_OUT (input floating).
- * PH2 - PIN2 (input floating).
- * PH3 - PIN3 (input floating).
- * PH4 - PIN4 (input floating).
- * PH5 - PIN5 (input floating).
- * PH6 - PIN6 (input floating).
- * PH7 - PIN7 (input floating).
- * PH8 - PIN8 (input floating).
- * PH9 - PIN9 (input floating).
- * PH10 - PIN10 (input floating).
- * PH11 - PIN11 (input floating).
- * PH12 - PIN12 (input floating).
- * PH13 - PIN13 (input floating).
- * PH14 - PIN14 (input floating).
- * PH15 - PIN15 (input floating).
- */
-#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
- PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOH_PIN2) | \
- PIN_MODE_INPUT(GPIOH_PIN3) | \
- PIN_MODE_INPUT(GPIOH_PIN4) | \
- PIN_MODE_INPUT(GPIOH_PIN5) | \
- PIN_MODE_INPUT(GPIOH_PIN6) | \
- PIN_MODE_INPUT(GPIOH_PIN7) | \
- PIN_MODE_INPUT(GPIOH_PIN8) | \
- PIN_MODE_INPUT(GPIOH_PIN9) | \
- PIN_MODE_INPUT(GPIOH_PIN10) | \
- PIN_MODE_INPUT(GPIOH_PIN11) | \
- PIN_MODE_INPUT(GPIOH_PIN12) | \
- PIN_MODE_INPUT(GPIOH_PIN13) | \
- PIN_MODE_INPUT(GPIOH_PIN14) | \
- PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_100M(GPIOH_OSC_IN) | \
- PIN_OSPEED_100M(GPIOH_OSC_OUT) | \
- PIN_OSPEED_100M(GPIOH_PIN2) | \
- PIN_OSPEED_100M(GPIOH_PIN3) | \
- PIN_OSPEED_100M(GPIOH_PIN4) | \
- PIN_OSPEED_100M(GPIOH_PIN5) | \
- PIN_OSPEED_100M(GPIOH_PIN6) | \
- PIN_OSPEED_100M(GPIOH_PIN7) | \
- PIN_OSPEED_100M(GPIOH_PIN8) | \
- PIN_OSPEED_100M(GPIOH_PIN9) | \
- PIN_OSPEED_100M(GPIOH_PIN10) | \
- PIN_OSPEED_100M(GPIOH_PIN11) | \
- PIN_OSPEED_100M(GPIOH_PIN12) | \
- PIN_OSPEED_100M(GPIOH_PIN13) | \
- PIN_OSPEED_100M(GPIOH_PIN14) | \
- PIN_OSPEED_100M(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOH_PIN15))
-#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \
- PIN_ODR_HIGH(GPIOH_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOH_PIN2) | \
- PIN_ODR_HIGH(GPIOH_PIN3) | \
- PIN_ODR_HIGH(GPIOH_PIN4) | \
- PIN_ODR_HIGH(GPIOH_PIN5) | \
- PIN_ODR_HIGH(GPIOH_PIN6) | \
- PIN_ODR_HIGH(GPIOH_PIN7) | \
- PIN_ODR_HIGH(GPIOH_PIN8) | \
- PIN_ODR_HIGH(GPIOH_PIN9) | \
- PIN_ODR_HIGH(GPIOH_PIN10) | \
- PIN_ODR_HIGH(GPIOH_PIN11) | \
- PIN_ODR_HIGH(GPIOH_PIN12) | \
- PIN_ODR_HIGH(GPIOH_PIN13) | \
- PIN_ODR_HIGH(GPIOH_PIN14) | \
- PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOH_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOH_PIN2, 0) | \
- PIN_AFIO_AF(GPIOH_PIN3, 0) | \
- PIN_AFIO_AF(GPIOH_PIN4, 0) | \
- PIN_AFIO_AF(GPIOH_PIN5, 0) | \
- PIN_AFIO_AF(GPIOH_PIN6, 0) | \
- PIN_AFIO_AF(GPIOH_PIN7, 0))
-#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
- PIN_AFIO_AF(GPIOH_PIN9, 0) | \
- PIN_AFIO_AF(GPIOH_PIN10, 0) | \
- PIN_AFIO_AF(GPIOH_PIN11, 0) | \
- PIN_AFIO_AF(GPIOH_PIN12, 0) | \
- PIN_AFIO_AF(GPIOH_PIN13, 0) | \
- PIN_AFIO_AF(GPIOH_PIN14, 0) | \
- PIN_AFIO_AF(GPIOH_PIN15, 0))
-
-/*
- * GPIOI setup:
- *
- * PI0 - PIN0 (input floating).
- * PI1 - PIN1 (input floating).
- * PI2 - PIN2 (input floating).
- * PI3 - PIN3 (input floating).
- * PI4 - PIN4 (input floating).
- * PI5 - PIN5 (input floating).
- * PI6 - PIN6 (input floating).
- * PI7 - PIN7 (input floating).
- * PI8 - PIN8 (input floating).
- * PI9 - PIN9 (input floating).
- * PI10 - PIN10 (input floating).
- * PI11 - PIN11 (input floating).
- * PI12 - PIN12 (input floating).
- * PI13 - PIN13 (input floating).
- * PI14 - PIN14 (input floating).
- * PI15 - PIN15 (input floating).
- */
-#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \
- PIN_MODE_INPUT(GPIOI_PIN1) | \
- PIN_MODE_INPUT(GPIOI_PIN2) | \
- PIN_MODE_INPUT(GPIOI_PIN3) | \
- PIN_MODE_INPUT(GPIOI_PIN4) | \
- PIN_MODE_INPUT(GPIOI_PIN5) | \
- PIN_MODE_INPUT(GPIOI_PIN6) | \
- PIN_MODE_INPUT(GPIOI_PIN7) | \
- PIN_MODE_INPUT(GPIOI_PIN8) | \
- PIN_MODE_INPUT(GPIOI_PIN9) | \
- PIN_MODE_INPUT(GPIOI_PIN10) | \
- PIN_MODE_INPUT(GPIOI_PIN11) | \
- PIN_MODE_INPUT(GPIOI_PIN12) | \
- PIN_MODE_INPUT(GPIOI_PIN13) | \
- PIN_MODE_INPUT(GPIOI_PIN14) | \
- PIN_MODE_INPUT(GPIOI_PIN15))
-#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOI_PIN15))
-#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_100M(GPIOI_PIN0) | \
- PIN_OSPEED_100M(GPIOI_PIN1) | \
- PIN_OSPEED_100M(GPIOI_PIN2) | \
- PIN_OSPEED_100M(GPIOI_PIN3) | \
- PIN_OSPEED_100M(GPIOI_PIN4) | \
- PIN_OSPEED_100M(GPIOI_PIN5) | \
- PIN_OSPEED_100M(GPIOI_PIN6) | \
- PIN_OSPEED_100M(GPIOI_PIN7) | \
- PIN_OSPEED_100M(GPIOI_PIN8) | \
- PIN_OSPEED_100M(GPIOI_PIN9) | \
- PIN_OSPEED_100M(GPIOI_PIN10) | \
- PIN_OSPEED_100M(GPIOI_PIN11) | \
- PIN_OSPEED_100M(GPIOI_PIN12) | \
- PIN_OSPEED_100M(GPIOI_PIN13) | \
- PIN_OSPEED_100M(GPIOI_PIN14) | \
- PIN_OSPEED_100M(GPIOI_PIN15))
-#define VAL_GPIOI_PUPDR (PIN_PUPDR_FLOATING(GPIOI_PIN0) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN3) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN8) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN11) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN12) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN14) | \
- PIN_PUPDR_FLOATING(GPIOI_PIN15))
-#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \
- PIN_ODR_HIGH(GPIOI_PIN1) | \
- PIN_ODR_HIGH(GPIOI_PIN2) | \
- PIN_ODR_HIGH(GPIOI_PIN3) | \
- PIN_ODR_HIGH(GPIOI_PIN4) | \
- PIN_ODR_HIGH(GPIOI_PIN5) | \
- PIN_ODR_HIGH(GPIOI_PIN6) | \
- PIN_ODR_HIGH(GPIOI_PIN7) | \
- PIN_ODR_HIGH(GPIOI_PIN8) | \
- PIN_ODR_HIGH(GPIOI_PIN9) | \
- PIN_ODR_HIGH(GPIOI_PIN10) | \
- PIN_ODR_HIGH(GPIOI_PIN11) | \
- PIN_ODR_HIGH(GPIOI_PIN12) | \
- PIN_ODR_HIGH(GPIOI_PIN13) | \
- PIN_ODR_HIGH(GPIOI_PIN14) | \
- PIN_ODR_HIGH(GPIOI_PIN15))
-#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0) | \
- PIN_AFIO_AF(GPIOI_PIN1, 0) | \
- PIN_AFIO_AF(GPIOI_PIN2, 0) | \
- PIN_AFIO_AF(GPIOI_PIN3, 0) | \
- PIN_AFIO_AF(GPIOI_PIN4, 0) | \
- PIN_AFIO_AF(GPIOI_PIN5, 0) | \
- PIN_AFIO_AF(GPIOI_PIN6, 0) | \
- PIN_AFIO_AF(GPIOI_PIN7, 0))
-#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0) | \
- PIN_AFIO_AF(GPIOI_PIN9, 0) | \
- PIN_AFIO_AF(GPIOI_PIN10, 0) | \
- PIN_AFIO_AF(GPIOI_PIN11, 0) | \
- PIN_AFIO_AF(GPIOI_PIN12, 0) | \
- PIN_AFIO_AF(GPIOI_PIN13, 0) | \
- PIN_AFIO_AF(GPIOI_PIN14, 0) | \
- PIN_AFIO_AF(GPIOI_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.mk b/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.mk deleted file mode 100644 index e7fe9119..00000000 --- a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/board.mk +++ /dev/null @@ -1,3 +0,0 @@ -BOARDINC = $(GFXLIB)/boards/base/Embest-STM32-DMSTF4BB/chibios_board
-BOARDSRC = $(BOARDINC)/board.c \
-
diff --git a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/cfg/board.chcfg b/boards/base/Embest-STM32-DMSTF4BB/chibios_board/cfg/board.chcfg deleted file mode 100644 index e30de70e..00000000 --- a/boards/base/Embest-STM32-DMSTF4BB/chibios_board/cfg/board.chcfg +++ /dev/null @@ -1,1186 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F4xx board Template -->
-<board
- xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f4xx_board.xsd">
- <configuration_settings>
- <templates_path>resources/gencfg/processors/boards/stm32f4xx/templates</templates_path>
- <output_path>..</output_path>
- </configuration_settings>
- <board_name>STMicroelectronics STM32F4-Discovery</board_name>
- <board_id>ST_STM32F4_DISCOVERY</board_id>
- <board_functions></board_functions>
- <clocks HSEFrequency="8000000" HSEBypass="false" LSEFrequency="0" VDD="300" />
- <ports>
- <GPIOA>
- <pin0
- ID="BUTTON"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID="LRCK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin5
- ID="SPC"
- Type="PushPull"
- Level="High"
- Speed="High"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="5" />
- <pin6
- ID="SDO"
- Type="PushPull"
- Level="High"
- Speed="High"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="5" />
- <pin7
- ID="SDI"
- Type="PushPull"
- Level="High"
- Speed="High"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="5" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" ></pin8>
- <pin9
- ID="VBUS_FS"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="OTG_FS_ID"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="10" />
- <pin11
- ID="OTG_FS_DM"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="10" />
- <pin12
- ID="OTG_FS_DP"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="10" />
- <pin13
- ID="SWDIO"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="0" />
- <pin14
- ID="SWCLK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- </GPIOA>
- <GPIOB>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="SWO"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID="SCL"
- Type="OpenDrain"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="4" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID="SDA"
- Type="OpenDrain"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="4" ></pin9>
- <pin10
- ID="CLK_IN"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- </GPIOB>
- <GPIOC>
- <pin0
- ID="OTG_FS_POWER_ON"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="PDM_OUT"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID="MCLK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="SCLK"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID="SDIN"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Alternate"
- Alternate="6" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- </GPIOC>
- <GPIOD>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID="RESET"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin5
- ID="OVER_CURRENT"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" ></pin5>
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="PullUp"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID="LED4"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin13
- ID="LED3"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin14
- ID="LED5"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" ></pin14>
- <pin15
- ID="LED6"
- Type="PushPull"
- Level="Low"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- </GPIOD>
- <GPIOE>
- <pin0
- ID="INT1"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="INT2"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="CS_SPI"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Output"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOE>
- <GPIOF>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOF>
- <GPIOG>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOG>
- <GPIOH>
- <pin0
- ID="OSC_IN"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="OSC_OUT"
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" ></pin2>
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOH>
- <GPIOI>
- <pin0
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Level="High"
- Speed="Maximum"
- Resistor="Floating"
- Mode="Input"
- Alternate="0" />
- </GPIOI>
- </ports>
-</board>
|