1 files changed, 124 insertions, 0 deletions
diff --git a/boards/base/FireBull-STM32F103-FB/board_SSD1289_firebullstm32f103.h b/boards/base/FireBull-STM32F103-FB/board_SSD1289_firebullstm32f103.h
new file mode 100644
index 00000000..99001e07
--- /dev/null
+++ b/boards/base/FireBull-STM32F103-FB/board_SSD1289_firebullstm32f103.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+// For a multiple display configuration we would put all this in a structure and then
+//	set g->board to that structure.
+#define SET_CS		palSetPad(GPIOD, 12);
+#define CLR_CS		palClearPad(GPIOD, 12);
+#define SET_RS		palSetPad(GPIOD, 13);
+#define CLR_RS		palClearPad(GPIOD, 13);
+#define SET_WR		palSetPad(GPIOD, 14);
+#define CLR_WR		palClearPad(GPIOD, 14);
+#define SET_RD		palSetPad(GPIOD, 15);
+#define CLR_RD		palClearPad(GPIOD, 15);
+
+static inline void init_board(GDisplay *g)
+{
+
+	// As we are not using multiple displays we set g->board to NULL as we don't use it.
+	g->board = 0;
+
+	switch(g->controllerdisplay) {
+	case 0:											// Set up for Display 0
+		palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
+		palSetPadMode(GPIOD, 12, PAL_MODE_OUTPUT_PUSHPULL);
+		palSetPadMode(GPIOD, 13, PAL_MODE_OUTPUT_PUSHPULL);
+		palSetPadMode(GPIOD, 14, PAL_MODE_OUTPUT_PUSHPULL);
+		palSetPadMode(GPIOD, 15, PAL_MODE_OUTPUT_PUSHPULL);
+
+		// Configure the pins to a well know state
+		SET_RS;
+		SET_RD;
+		SET_WR;
+		CLR_CS;
+
+		break;
+	}
+}
+
+static inline void post_init_board(GDisplay *g)
+{
+	(void) g;
+}
+
+static inline void setpin_reset(GDisplay *g, bool_t state)
+{
+	(void) g;
+	(void) state;
+
+	/* Nothing to do here - reset pin tied to Vcc */
+}
+
+static inline void set_backlight(GDisplay *g, uint8_t percent)
+{
+	(void) g;
+	(void) percent;
+
+	/* Nothing to do here - Backlight always on */
+}
+
+static inline void acquire_bus(GDisplay *g)
+{
+	(void) g;
+}
+
+static inline void release_bus(GDisplay *g)
+{
+	(void) g;
+}
+
+static inline void write_index(GDisplay *g, uint16_t index)
+{
+	(void) g;
+
+	palWritePort(GPIOE, index);
+	CLR_RS;
+	CLR_WR;
+	SET_WR;
+	SET_RS;
+}
+
+static inline void write_data(GDisplay *g, uint16_t data)
+{
+	(void) g;
+
+	palWritePort(GPIOE, data);
+	CLR_WR;
+	SET_WR;
+}
+
+static inline void setreadmode(GDisplay *g)
+{
+	(void) g;
+
+	// change pin mode to digital input
+	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
+	CLR_RD;
+}
+
+static inline void setwritemode(GDisplay *g)
+{
+	(void) g;
+	
+	// change pin mode back to digital output
+	SET_RD;
+	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
+}
+
+static inline uint16_t read_data(GDisplay *g) {
+	return palReadPort(GPIOE);
+}
+
+#if defined(GDISP_USE_DMA)
+	#error "GDISP - SSD1289: The GPIO interface does not support DMA"
+#endif
+
+#endif /* _GDISP_LLD_BOARD_H */
+