1 files changed, 134 insertions, 0 deletions
diff --git a/boards/base/Mikromedia-Plus-STM32-M4/board_SSD1963.h b/boards/base/Mikromedia-Plus-STM32-M4/board_SSD1963.h
new file mode 100644
index 00000000..b0114ca9
--- /dev/null
+++ b/boards/base/Mikromedia-Plus-STM32-M4/board_SSD1963.h
@@ -0,0 +1,134 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+//#define SSD1963_INIT_METHOD_2	TRUE
+
+static const LCD_Parameters	DisplayTimings[] = {
+	// You need one of these array elements per display
+	{
+		480, 272,								// Panel width and height
+		2, 2, 41,								// Horizontal Timings (back porch, front porch, pulse)
+		CALC_PERIOD(480,2,2,41),				// Total Horizontal Period (calculated from above line)
+		2, 2, 10,								// Vertical Timings (back porch, front porch, pulse)
+		CALC_PERIOD(272,2,2,10), 				// Total Vertical Period (calculated from above line)
+		CALC_FPR(480,272,2,2,41,2,2,10,73ULL),	// FPR - the 60ULL is the frames per second. Note the ULL!
+		LCD_PANEL_DATA_WIDTH_24BIT | LCD_PANEL_ENABLE_DITHERING
+	},
+};
+
+/* GPIO Pin Config */
+#define GDISP_CMD_PORT          GPIOF
+#define GDISP_DATA_LO_PORT      GPIOG
+#define GDISP_DATA_HI_PORT      GPIOE
+
+#define GDISP_WR                11
+#define GDISP_RD                12
+#define GDISP_CS                13
+#define GDISP_RST               14
+#define GDISP_DC                15
+
+#define SET_CS                  palSetPad(GDISP_CMD_PORT, GDISP_CS);
+#define CLR_CS                  palClearPad(GDISP_CMD_PORT, GDISP_CS);
+#define SET_RST                 palSetPad(GDISP_CMD_PORT, GDISP_RST);
+#define CLR_RST                 palClearPad(GDISP_CMD_PORT, GDISP_RST);
+#define SET_WR                  palSetPad(GDISP_CMD_PORT, GDISP_WR);
+#define CLR_WR                  palClearPad(GDISP_CMD_PORT, GDISP_WR);
+#define SET_RD                  palSetPad(GDISP_CMD_PORT, GDISP_RD);
+#define CLR_RD                  palClearPad(GDISP_CMD_PORT, GDISP_RD);
+#define SET_DC                  palSetPad(GDISP_CMD_PORT, GDISP_DC);
+#define CLR_DC                  palClearPad(GDISP_CMD_PORT, GDISP_DC);
+
+#define writeStrobe             { CLR_WR; asm volatile ("nop;"); SET_WR; }
+
+IOBus busCMD    = { GDISP_CMD_PORT, (1 << GDISP_CS) | (1 << GDISP_RST) | (1 << GDISP_WR) | (1 << GDISP_RD) | (1 << GDISP_DC), 11 };
+IOBus busDataLo = { GDISP_DATA_LO_PORT, 0xFF, 0 };
+IOBus busDataHi = { GDISP_DATA_HI_PORT, 0xFF, 8 };
+
+
+static inline void init_board(GDisplay *g) {
+  g->board = 0;
+  switch(g->controllerdisplay) {
+    case 0:
+	  {
+	    palSetBusMode(&busCMD, PAL_MODE_OUTPUT_PUSHPULL);
+	    palSetBusMode(&busDataLo, PAL_MODE_OUTPUT_PUSHPULL);
+	    palSetBusMode(&busDataHi, PAL_MODE_OUTPUT_PUSHPULL);
+	    SET_CS; SET_WR; SET_RD; SET_DC; SET_RST;
+	    break;
+	  }
+    default:
+      break;
+  }
+}
+
+static inline void post_init_board(GDisplay *g) {
+  (void) g;
+}
+
+static inline void setpin_reset(GDisplay *g, bool_t state) {
+  (void) g;
+  if (state) {
+    CLR_RST;
+    } else {
+      SET_RST;
+    }
+}
+
+static inline void acquire_bus(GDisplay *g) {
+  (void) g;
+  CLR_CS;
+}
+
+static inline void release_bus(GDisplay *g) {
+  (void) g;
+  SET_CS;
+}
+
+static inline void write_index(GDisplay *g, uint16_t index) {
+  (void) g;
+
+  CLR_DC;
+  palWriteBus(&busDataLo, (index & 0xFF));
+  palWriteBus(&busDataHi, (index >> 8));
+  writeStrobe;
+  SET_DC;
+}
+
+static inline void write_data(GDisplay *g, uint16_t data) {
+  (void) g;
+
+  palWriteBus(&busDataLo, (data & 0xFF));
+  palWriteBus(&busDataHi, (data >> 8));
+  writeStrobe;
+}
+
+static inline void setreadmode(GDisplay *g) {
+  (void) g;
+  palSetBusMode(&busDataLo, PAL_MODE_INPUT_PULLUP);
+  palSetBusMode(&busDataHi, PAL_MODE_INPUT_PULLUP);
+}
+
+static inline void setwritemode(GDisplay *g) {
+  (void) g;
+  palSetBusMode(&busDataLo, PAL_MODE_OUTPUT_PUSHPULL);
+  palSetBusMode(&busDataHi, PAL_MODE_OUTPUT_PUSHPULL);
+}
+
+static inline uint16_t read_data(GDisplay *g) {
+  (void) g;
+
+  uint16_t data;
+  CLR_RD;
+  data = (palReadBus(&busDataHi) << 8) | palReadBus(&busDataLo);
+  SET_RD;
+  return data;
+}
+
+#endif /* _GDISP_LLD_BOARD_H */