diff options
Diffstat (limited to 'boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h')
| -rw-r--r-- | boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h | 1140 |
1 files changed, 1140 insertions, 0 deletions
diff --git a/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h b/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h new file mode 100644 index 00000000..3764c794 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h @@ -0,0 +1,1140 @@ +/** + ****************************************************************************** + * @file stm32f4xx_fmc.h + * @author MCD Application Team + * @version V1.2.1 + * @date 19-September-2013 + * @brief This file contains all the functions prototypes for the FMC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_FMC_H +#define __STM32F4xx_FMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +//FIXME this should not be needed +#define STM32F429_439xx + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FMC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief Timing parameters For NOR/SRAM Banks + */ +typedef struct +{ + uint32_t FMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between 0 and 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t FMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between 1 and 15. + @note This parameter is not used with synchronous NOR Flash memories.*/ + + uint32_t FMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between 1 and 255. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ + + uint32_t FMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between 0 and 15. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t FMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. + This parameter can be a value between 1 and 15. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ + + uint32_t FMC_DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between 0 and 15 in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t FMC_AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FMC_Access_Mode */ +}FMC_NORSRAMTimingInitTypeDef; + +/** + * @brief FMC NOR/SRAM Init structure definition + */ +typedef struct +{ + uint32_t FMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. + This parameter can be a value of @ref FMC_NORSRAM_Bank */ + + uint32_t FMC_DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the databus or not. + This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */ + + uint32_t FMC_MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory bank. + This parameter can be a value of @ref FMC_Memory_Type */ + + uint32_t FMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FMC_NORSRAM_Data_Width */ + + uint32_t FMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FMC_Burst_Access_Mode */ + + uint32_t FMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal_Polarity */ + + uint32_t FMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FMC_Wrap_Mode */ + + uint32_t FMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FMC_Wait_Timing */ + + uint32_t FMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FMC. + This parameter can be a value of @ref FMC_Write_Operation */ + + uint32_t FMC_WaitSignal; /*!< Enables or disables the wait state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal */ + + uint32_t FMC_ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FMC_Extended_Mode */ + + uint32_t FMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FMC_AsynchronousWait */ + + uint32_t FMC_WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FMC_Write_Burst */ + + uint32_t FMC_ContinousClock; /*!< Enables or disables the FMC clock output to external memory devices. + This parameter is only enabled through the FMC_BCR1 register, and don't care + through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Continous_Clock */ + + + FMC_NORSRAMTimingInitTypeDef* FMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the Extended Mode is not used*/ + + FMC_NORSRAMTimingInitTypeDef* FMC_WriteTimingStruct; /*!< Timing Parameters for write access if the Extended Mode is used*/ +}FMC_NORSRAMInitTypeDef; + +/** + * @brief Timing parameters For FMC NAND and PCCARD Banks + */ +typedef struct +{ + uint32_t FMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between 0 and 255.*/ + + uint32_t FMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between 0 and 255 */ + + uint32_t FMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command de-assertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between 0 and 255 */ + + uint32_t FMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + databus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between 0 and 255 */ +}FMC_NAND_PCCARDTimingInitTypeDef; + +/** + * @brief FMC NAND Init structure definition + */ +typedef struct +{ + uint32_t FMC_Bank; /*!< Specifies the NAND memory bank that will be used. + This parameter can be a value of @ref FMC_NAND_Bank */ + + uint32_t FMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. + This parameter can be any value of @ref FMC_Wait_feature */ + + uint32_t FMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FMC_NAND_Data_Width */ + + uint32_t FMC_ECC; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FMC_ECC */ + + uint32_t FMC_ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FMC_ECC_Page_Size */ + + uint32_t FMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 255. */ + + uint32_t FMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0 and 255 */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_CommonSpaceTimingStruct; /*!< FMC Common Space Timing */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_AttributeSpaceTimingStruct; /*!< FMC Attribute Space Timing */ +}FMC_NANDInitTypeDef; + +/** + * @brief FMC PCCARD Init structure definition + */ + +typedef struct +{ + uint32_t FMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. + This parameter can be any value of @ref FMC_Wait_feature */ + + uint32_t FMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 255. */ + + uint32_t FMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0 and 255 */ + + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_CommonSpaceTimingStruct; /*!< FMC Common Space Timing */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_AttributeSpaceTimingStruct; /*!< FMC Attribute Space Timing */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_IOSpaceTimingStruct; /*!< FMC IO Space Timing */ +}FMC_PCCARDInitTypeDef; + +/** + * @brief Timing parameters for FMC SDRAM Banks + */ + +typedef struct +{ + uint32_t FMC_LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and + an active or Refresh command in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to + issuing the Activate command in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock + cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command + and the delay between two consecutive Refresh commands in number of + memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_RPDelay; /*!< Defines the delay between a Precharge Command and an other command + in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write command + in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + +}FMC_SDRAMTimingInitTypeDef; + +/** + * @brief Command parameters for FMC SDRAM Banks + */ + + +typedef struct +{ + uint32_t FMC_CommandMode; /*!< Defines the command issued to the SDRAM device. + This parameter can be a value of @ref FMC_Command_Mode. */ + + uint32_t FMC_CommandTarget; /*!< Defines which bank (1 or 2) the command will be issued to. + This parameter can be a value of @ref FMC_Command_Target. */ + + uint32_t FMC_AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued + in auto refresh mode. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */ + +}FMC_SDRAMCommandTypeDef; + +/** + * @brief FMC SDRAM Init structure definition + */ + +typedef struct +{ + uint32_t FMC_Bank; /*!< Specifies the SDRAM memory bank that will be used. + This parameter can be a value of @ref FMC_SDRAM_Bank */ + + uint32_t FMC_ColumnBitsNumber; /*!< Defines the number of bits of column address. + This parameter can be a value of @ref FMC_ColumnBits_Number. */ + + uint32_t FMC_RowBitsNumber; /*!< Defines the number of bits of column address.. + This parameter can be a value of @ref FMC_RowBits_Number. */ + + uint32_t FMC_SDMemoryDataWidth; /*!< Defines the memory device width. + This parameter can be a value of @ref FMC_SDMemory_Data_Width. */ + + uint32_t FMC_InternalBankNumber; /*!< Defines the number of bits of column address. + This parameter can be of @ref FMC_InternalBank_Number. */ + + uint32_t FMC_CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles. + This parameter can be a value of @ref FMC_CAS_Latency. */ + + uint32_t FMC_WriteProtection; /*!< Enables the SDRAM bank to be accessed in write mode. + This parameter can be a value of @ref FMC_Write_Protection. */ + + uint32_t FMC_SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM Banks and they allow to disable + the clock before changing frequency. + This parameter can be a value of @ref FMC_SDClock_Period. */ + + uint32_t FMC_ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read commands + during the CAS latency and stores data in the Read FIFO. + This parameter can be a value of @ref FMC_Read_Burst. */ + + uint32_t FMC_ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path. + This parameter can be a value of @ref FMC_ReadPipe_Delay. */ + + FMC_SDRAMTimingInitTypeDef* FMC_SDRAMTimingStruct; /*!< Timing Parameters for write and read access*/ + +}FMC_SDRAMInitTypeDef; + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FMC_Exported_Constants + * @{ + */ + +/** @defgroup FMC_NORSRAM_Bank + * @{ + */ +#define FMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) +#define FMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) +#define FMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) +#define FMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) + +#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_Bank1_NORSRAM1) || \ + ((BANK) == FMC_Bank1_NORSRAM2) || \ + ((BANK) == FMC_Bank1_NORSRAM3) || \ + ((BANK) == FMC_Bank1_NORSRAM4)) +/** + * @} + */ + +/** @defgroup FMC_NAND_Bank + * @{ + */ +#define FMC_Bank2_NAND ((uint32_t)0x00000010) +#define FMC_Bank3_NAND ((uint32_t)0x00000100) + +#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_Bank2_NAND) || \ + ((BANK) == FMC_Bank3_NAND)) +/** + * @} + */ + +/** @defgroup FMC_PCCARD_Bank + * @{ + */ +#define FMC_Bank4_PCCARD ((uint32_t)0x00001000) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Bank + * @{ + */ +#define FMC_Bank1_SDRAM ((uint32_t)0x00000000) +#define FMC_Bank2_SDRAM ((uint32_t)0x00000001) + +#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_Bank1_SDRAM) || \ + ((BANK) == FMC_Bank2_SDRAM)) + +/** + * @} + */ + + +/** @defgroup FMC_NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FMC_Data_Address_Bus_Multiplexing + * @{ + */ + +#define FMC_DataAddressMux_Disable ((uint32_t)0x00000000) +#define FMC_DataAddressMux_Enable ((uint32_t)0x00000002) + +#define IS_FMC_MUX(MUX) (((MUX) == FMC_DataAddressMux_Disable) || \ + ((MUX) == FMC_DataAddressMux_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Memory_Type + * @{ + */ + +#define FMC_MemoryType_SRAM ((uint32_t)0x00000000) +#define FMC_MemoryType_PSRAM ((uint32_t)0x00000004) +#define FMC_MemoryType_NOR ((uint32_t)0x00000008) + +#define IS_FMC_MEMORY(MEMORY) (((MEMORY) == FMC_MemoryType_SRAM) || \ + ((MEMORY) == FMC_MemoryType_PSRAM)|| \ + ((MEMORY) == FMC_MemoryType_NOR)) +/** + * @} + */ + +/** @defgroup FMC_NORSRAM_Data_Width + * @{ + */ + +#define FMC_NORSRAM_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FMC_NORSRAM_MemoryDataWidth_16b ((uint32_t)0x00000010) +#define FMC_NORSRAM_MemoryDataWidth_32b ((uint32_t)0x00000020) + +#define IS_FMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NORSRAM_MemoryDataWidth_8b) || \ + ((WIDTH) == FMC_NORSRAM_MemoryDataWidth_16b) || \ + ((WIDTH) == FMC_NORSRAM_MemoryDataWidth_32b)) +/** + * @} + */ + +/** @defgroup FMC_Burst_Access_Mode + * @{ + */ + +#define FMC_BurstAccessMode_Disable ((uint32_t)0x00000000) +#define FMC_BurstAccessMode_Enable ((uint32_t)0x00000100) + +#define IS_FMC_BURSTMODE(STATE) (((STATE) == FMC_BurstAccessMode_Disable) || \ + ((STATE) == FMC_BurstAccessMode_Enable)) +/** + * @} + */ + +/** @defgroup FMC_AsynchronousWait + * @{ + */ +#define FMC_AsynchronousWait_Disable ((uint32_t)0x00000000) +#define FMC_AsynchronousWait_Enable ((uint32_t)0x00008000) + +#define IS_FMC_ASYNWAIT(STATE) (((STATE) == FMC_AsynchronousWait_Disable) || \ + ((STATE) == FMC_AsynchronousWait_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal_Polarity + * @{ + */ +#define FMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) +#define FMC_WaitSignalPolarity_High ((uint32_t)0x00000200) + +#define IS_FMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FMC_WaitSignalPolarity_Low) || \ + ((POLARITY) == FMC_WaitSignalPolarity_High)) +/** + * @} + */ + +/** @defgroup FMC_Wrap_Mode + * @{ + */ +#define FMC_WrapMode_Disable ((uint32_t)0x00000000) +#define FMC_WrapMode_Enable ((uint32_t)0x00000400) + +#define IS_FMC_WRAP_MODE(MODE) (((MODE) == FMC_WrapMode_Disable) || \ + ((MODE) == FMC_WrapMode_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Wait_Timing + * @{ + */ +#define FMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) +#define FMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) + +#define IS_FMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FMC_WaitSignalActive_BeforeWaitState) || \ + ((ACTIVE) == FMC_WaitSignalActive_DuringWaitState)) +/** + * @} + */ + +/** @defgroup FMC_Write_Operation + * @{ + */ +#define FMC_WriteOperation_Disable ((uint32_t)0x00000000) +#define FMC_WriteOperation_Enable ((uint32_t)0x00001000) + +#define IS_FMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FMC_WriteOperation_Disable) || \ + ((OPERATION) == FMC_WriteOperation_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal + * @{ + */ +#define FMC_WaitSignal_Disable ((uint32_t)0x00000000) +#define FMC_WaitSignal_Enable ((uint32_t)0x00002000) + +#define IS_FMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FMC_WaitSignal_Disable) || \ + ((SIGNAL) == FMC_WaitSignal_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Extended_Mode + * @{ + */ +#define FMC_ExtendedMode_Disable ((uint32_t)0x00000000) +#define FMC_ExtendedMode_Enable ((uint32_t)0x00004000) + +#define IS_FMC_EXTENDED_MODE(MODE) (((MODE) == FMC_ExtendedMode_Disable) || \ + ((MODE) == FMC_ExtendedMode_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Write_Burst + * @{ + */ + +#define FMC_WriteBurst_Disable ((uint32_t)0x00000000) +#define FMC_WriteBurst_Enable ((uint32_t)0x00080000) + +#define IS_FMC_WRITE_BURST(BURST) (((BURST) == FMC_WriteBurst_Disable) || \ + ((BURST) == FMC_WriteBurst_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Continous_Clock + * @{ + */ + +#define FMC_CClock_SyncOnly ((uint32_t)0x00000000) +#define FMC_CClock_SyncAsync ((uint32_t)0x00100000) + +#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CClock_SyncOnly) || \ + ((CCLOCK) == FMC_CClock_SyncAsync)) +/** + * @} + */ + +/** @defgroup FMC_Address_Setup_Time + * @{ + */ +#define IS_FMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15) +/** + * @} + */ + +/** @defgroup FMC_Address_Hold_Time + * @{ + */ +#define IS_FMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15)) +/** + * @} + */ + +/** @defgroup FMC_Data_Setup_Time + * @{ + */ +#define IS_FMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255)) +/** + * @} + */ + +/** @defgroup FMC_Bus_Turn_around_Duration + * @{ + */ +#define IS_FMC_TURNAROUND_TIME(TIME) ((TIME) <= 15) +/** + * @} + */ + +/** @defgroup FMC_CLK_Division + * @{ + */ +#define IS_FMC_CLK_DIV(DIV) (((DIV) > 0) && ((DIV) <= 15)) +/** + * @} + */ + +/** @defgroup FMC_Data_Latency + * @{ + */ +#define IS_FMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 15) +/** + * @} + */ + +/** @defgroup FMC_Access_Mode + * @{ + */ +#define FMC_AccessMode_A ((uint32_t)0x00000000) +#define FMC_AccessMode_B ((uint32_t)0x10000000) +#define FMC_AccessMode_C ((uint32_t)0x20000000) +#define FMC_AccessMode_D ((uint32_t)0x30000000) + +#define IS_FMC_ACCESS_MODE(MODE) (((MODE) == FMC_AccessMode_A) || \ + ((MODE) == FMC_AccessMode_B) || \ + ((MODE) == FMC_AccessMode_C) || \ + ((MODE) == FMC_AccessMode_D)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FMC_NAND_PCCARD_Controller + * @{ + */ + +/** @defgroup FMC_Wait_feature + * @{ + */ +#define FMC_Waitfeature_Disable ((uint32_t)0x00000000) +#define FMC_Waitfeature_Enable ((uint32_t)0x00000002) + +#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_Waitfeature_Disable) || \ + ((FEATURE) == FMC_Waitfeature_Enable)) +/** + * @} + */ + +/** @defgroup FMC_NAND_Data_Width + * @{ + */ +#define FMC_NAND_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FMC_NAND_MemoryDataWidth_16b ((uint32_t)0x00000010) + +#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_MemoryDataWidth_8b) || \ + ((WIDTH) == FMC_NAND_MemoryDataWidth_16b)) +/** + * @} + */ + +/** @defgroup FMC_ECC + * @{ + */ +#define FMC_ECC_Disable ((uint32_t)0x00000000) +#define FMC_ECC_Enable ((uint32_t)0x00000040) + +#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_ECC_Disable) || \ + ((STATE) == FMC_ECC_Enable)) +/** + * @} + */ + +/** @defgroup FMC_ECC_Page_Size + * @{ + */ +#define FMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) +#define FMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) +#define FMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) +#define FMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) +#define FMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) +#define FMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) + +#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_ECCPageSize_256Bytes) || \ + ((SIZE) == FMC_ECCPageSize_512Bytes) || \ + ((SIZE) == FMC_ECCPageSize_1024Bytes) || \ + ((SIZE) == FMC_ECCPageSize_2048Bytes) || \ + ((SIZE) == FMC_ECCPageSize_4096Bytes) || \ + ((SIZE) == FMC_ECCPageSize_8192Bytes)) +/** + * @} + */ + +/** @defgroup FMC_TCLR_Setup_Time + * @{ + */ +#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_TAR_Setup_Time + * @{ + */ +#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_Setup_Time + * @{ + */ +#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_Wait_Setup_Time + * @{ + */ +#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_Hold_Setup_Time + * @{ + */ +#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_HiZ_Setup_Time + * @{ + */ +#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FMC_ColumnBits_Number + * @{ + */ +#define FMC_ColumnBits_Number_8b ((uint32_t)0x00000000) +#define FMC_ColumnBits_Number_9b ((uint32_t)0x00000001) +#define FMC_ColumnBits_Number_10b ((uint32_t)0x00000002) +#define FMC_ColumnBits_Number_11b ((uint32_t)0x00000003) + +#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_ColumnBits_Number_8b) || \ + ((COLUMN) == FMC_ColumnBits_Number_9b) || \ + ((COLUMN) == FMC_ColumnBits_Number_10b) || \ + ((COLUMN) == FMC_ColumnBits_Number_11b)) + +/** + * @} + */ + +/** @defgroup FMC_RowBits_Number + * @{ + */ +#define FMC_RowBits_Number_11b ((uint32_t)0x00000000) +#define FMC_RowBits_Number_12b ((uint32_t)0x00000004) +#define FMC_RowBits_Number_13b ((uint32_t)0x00000008) + +#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_RowBits_Number_11b) || \ + ((ROW) == FMC_RowBits_Number_12b) || \ + ((ROW) == FMC_RowBits_Number_13b)) + +/** + * @} + */ + +/** @defgroup FMC_SDMemory_Data_Width + * @{ + */ +#define FMC_SDMemory_Width_8b ((uint32_t)0x00000000) +#define FMC_SDMemory_Width_16b ((uint32_t)0x00000010) +#define FMC_SDMemory_Width_32b ((uint32_t)0x00000020) + +#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDMemory_Width_8b) || \ + ((WIDTH) == FMC_SDMemory_Width_16b) || \ + ((WIDTH) == FMC_SDMemory_Width_32b)) + +/** + * @} + */ + +/** @defgroup FMC_InternalBank_Number + * @{ + */ +#define FMC_InternalBank_Number_2 ((uint32_t)0x00000000) +#define FMC_InternalBank_Number_4 ((uint32_t)0x00000040) + +#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_InternalBank_Number_2) || \ + ((NUMBER) == FMC_InternalBank_Number_4)) + +/** + * @} + */ + + +/** @defgroup FMC_CAS_Latency + * @{ + */ +#define FMC_CAS_Latency_1 ((uint32_t)0x00000080) +#define FMC_CAS_Latency_2 ((uint32_t)0x00000100) +#define FMC_CAS_Latency_3 ((uint32_t)0x00000180) + +#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_CAS_Latency_1) || \ + ((LATENCY) == FMC_CAS_Latency_2) || \ + ((LATENCY) == FMC_CAS_Latency_3)) + +/** + * @} + */ + +/** @defgroup FMC_Write_Protection + * @{ + */ +#define FMC_Write_Protection_Disable ((uint32_t)0x00000000) +#define FMC_Write_Protection_Enable ((uint32_t)0x00000200) + +#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_Write_Protection_Disable) || \ + ((WRITE) == FMC_Write_Protection_Enable)) + +/** + * @} + */ + + +/** @defgroup FMC_SDClock_Period + * @{ + */ +#define FMC_SDClock_Disable ((uint32_t)0x00000000) +#define FMC_SDClock_Period_2 ((uint32_t)0x00000800) +#define FMC_SDClock_Period_3 ((uint32_t)0x00000C00) + +#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDClock_Disable) || \ + ((PERIOD) == FMC_SDClock_Period_2) || \ + ((PERIOD) == FMC_SDClock_Period_3)) + +/** + * @} + */ + +/** @defgroup FMC_Read_Burst + * @{ + */ +#define FMC_Read_Burst_Disable ((uint32_t)0x00000000) +#define FMC_Read_Burst_Enable ((uint32_t)0x00001000) + +#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_Read_Burst_Disable) || \ + ((RBURST) == FMC_Read_Burst_Enable)) + +/** + * @} + */ + +/** @defgroup FMC_ReadPipe_Delay + * @{ + */ +#define FMC_ReadPipe_Delay_0 ((uint32_t)0x00000000) +#define FMC_ReadPipe_Delay_1 ((uint32_t)0x00002000) +#define FMC_ReadPipe_Delay_2 ((uint32_t)0x00004000) + +#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_ReadPipe_Delay_0) || \ + ((DELAY) == FMC_ReadPipe_Delay_1) || \ + ((DELAY) == FMC_ReadPipe_Delay_2)) + +/** + * @} + */ + +/** @defgroup FMC_LoadToActive_Delay + * @{ + */ +#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_ExitSelfRefresh_Delay + * @{ + */ +#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_SelfRefresh_Time + * @{ + */ +#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_RowCycle_Delay + * @{ + */ +#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_Write_Recovery_Time + * @{ + */ +#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_RP_Delay + * @{ + */ +#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_RCD_Delay + * @{ + */ +#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) + +/** + * @} + */ + +/** @defgroup FMC_Command_Mode + * @{ + */ +#define FMC_Command_Mode_normal ((uint32_t)0x00000000) +#define FMC_Command_Mode_CLK_Enabled ((uint32_t)0x00000001) +#define FMC_Command_Mode_PALL ((uint32_t)0x00000002) +#define FMC_Command_Mode_AutoRefresh ((uint32_t)0x00000003) +#define FMC_Command_Mode_LoadMode ((uint32_t)0x00000004) +#define FMC_Command_Mode_Selfrefresh ((uint32_t)0x00000005) +#define FMC_Command_Mode_PowerDown ((uint32_t)0x00000006) + +#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_Command_Mode_normal) || \ + ((COMMAND) == FMC_Command_Mode_CLK_Enabled) || \ + ((COMMAND) == FMC_Command_Mode_PALL) || \ + ((COMMAND) == FMC_Command_Mode_AutoRefresh) || \ + ((COMMAND) == FMC_Command_Mode_LoadMode) || \ + ((COMMAND) == FMC_Command_Mode_Selfrefresh) || \ + ((COMMAND) == FMC_Command_Mode_PowerDown)) + +/** + * @} + */ + +/** @defgroup FMC_Command_Target + * @{ + */ +#define FMC_Command_Target_bank2 ((uint32_t)0x00000008) +#define FMC_Command_Target_bank1 ((uint32_t)0x00000010) +#define FMC_Command_Target_bank1_2 ((uint32_t)0x00000018) + +#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_Command_Target_bank1) || \ + ((TARGET) == FMC_Command_Target_bank2) || \ + ((TARGET) == FMC_Command_Target_bank1_2)) + +/** + * @} + */ + +/** @defgroup FMC_AutoRefresh_Number + * @{ + */ +#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16)) + +/** + * @} + */ + +/** @defgroup FMC_ModeRegister_Definition + * @{ + */ +#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191) + +/** + * @} + */ + + +/** @defgroup FMC_Mode_Status + * @{ + */ +#define FMC_NormalMode_Status ((uint32_t)0x00000000) +#define FMC_SelfRefreshMode_Status FMC_SDSR_MODES1_0 +#define FMC_PowerDownMode_Status FMC_SDSR_MODES1_1 + +#define IS_FMC_MODE_STATUS(STATUS) (((STATUS) == FMC_NormalMode_Status) || \ + ((STATUS) == FMC_SelfRefreshMode_Status) || \ + ((STATUS) == FMC_PowerDownMode_Status)) + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FMC_Interrupt_sources + * @{ + */ +#define FMC_IT_RisingEdge ((uint32_t)0x00000008) +#define FMC_IT_Level ((uint32_t)0x00000010) +#define FMC_IT_FallingEdge ((uint32_t)0x00000020) +#define FMC_IT_Refresh ((uint32_t)0x00004000) + +#define IS_FMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000)) +#define IS_FMC_GET_IT(IT) (((IT) == FMC_IT_RisingEdge) || \ + ((IT) == FMC_IT_Level) || \ + ((IT) == FMC_IT_FallingEdge) || \ + ((IT) == FMC_IT_Refresh)) + +#define IS_FMC_IT_BANK(BANK) (((BANK) == FMC_Bank2_NAND) || \ + ((BANK) == FMC_Bank3_NAND) || \ + ((BANK) == FMC_Bank4_PCCARD) || \ + ((BANK) == FMC_Bank1_SDRAM) || \ + ((BANK) == FMC_Bank2_SDRAM)) +/** + * @} + */ + +/** @defgroup FMC_Flags + * @{ + */ +#define FMC_FLAG_RisingEdge ((uint32_t)0x00000001) +#define FMC_FLAG_Level ((uint32_t)0x00000002) +#define FMC_FLAG_FallingEdge ((uint32_t)0x00000004) +#define FMC_FLAG_FEMPT ((uint32_t)0x00000040) +#define FMC_FLAG_Refresh FMC_SDSR_RE +#define FMC_FLAG_Busy FMC_SDSR_BUSY + +#define IS_FMC_GET_FLAG(FLAG) (((FLAG) == FMC_FLAG_RisingEdge) || \ + ((FLAG) == FMC_FLAG_Level) || \ + ((FLAG) == FMC_FLAG_FallingEdge) || \ + ((FLAG) == FMC_FLAG_FEMPT) || \ + ((FLAG) == FMC_FLAG_Refresh) || \ + ((FLAG) == FMC_SDSR_BUSY)) + +#define IS_FMC_GETFLAG_BANK(BANK) (((BANK) == FMC_Bank2_NAND) || \ + ((BANK) == FMC_Bank3_NAND) || \ + ((BANK) == FMC_Bank4_PCCARD) || \ + ((BANK) == FMC_Bank1_SDRAM) || \ + ((BANK) == FMC_Bank2_SDRAM) || \ + ((BANK) == (FMC_Bank1_SDRAM | FMC_Bank2_SDRAM))) + +#define IS_FMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) + + +/** + * @} + */ + +/** @defgroup FMC_Refresh_count + * @{ + */ +#define IS_FMC_REFRESH_COUNT(COUNT) ((COUNT) <= 8191) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* NOR/SRAM Controller functions **********************************************/ +void FMC_NORSRAMDeInit(uint32_t FMC_Bank); +void FMC_NORSRAMInit(FMC_NORSRAMInitTypeDef* FMC_NORSRAMInitStruct); +void FMC_NORSRAMStructInit(FMC_NORSRAMInitTypeDef* FMC_NORSRAMInitStruct); +void FMC_NORSRAMCmd(uint32_t FMC_Bank, FunctionalState NewState); + +/* NAND Controller functions **************************************************/ +void FMC_NANDDeInit(uint32_t FMC_Bank); +void FMC_NANDInit(FMC_NANDInitTypeDef* FMC_NANDInitStruct); +void FMC_NANDStructInit(FMC_NANDInitTypeDef* FMC_NANDInitStruct); +void FMC_NANDCmd(uint32_t FMC_Bank, FunctionalState NewState); +void FMC_NANDECCCmd(uint32_t FMC_Bank, FunctionalState NewState); +uint32_t FMC_GetECC(uint32_t FMC_Bank); + +/* PCCARD Controller functions ************************************************/ +void FMC_PCCARDDeInit(void); +void FMC_PCCARDInit(FMC_PCCARDInitTypeDef* FMC_PCCARDInitStruct); +void FMC_PCCARDStructInit(FMC_PCCARDInitTypeDef* FMC_PCCARDInitStruct); +void FMC_PCCARDCmd(FunctionalState NewState); + +/* SDRAM Controller functions ************************************************/ +void FMC_SDRAMDeInit(uint32_t FMC_Bank); +void FMC_SDRAMInit(FMC_SDRAMInitTypeDef* FMC_SDRAMInitStruct); +void FMC_SDRAMStructInit(FMC_SDRAMInitTypeDef* FMC_SDRAMInitStruct); +void FMC_SDRAMCmdConfig(FMC_SDRAMCommandTypeDef* FMC_SDRAMCommandStruct); +uint32_t FMC_GetModeStatus(uint32_t SDRAM_Bank); +void FMC_SetRefreshCount(uint32_t FMC_Count); +void FMC_SetAutoRefresh_Number(uint32_t FMC_Number); +void FMC_SDRAMWriteProtectionConfig(uint32_t SDRAM_Bank, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void FMC_ITConfig(uint32_t FMC_Bank, uint32_t FMC_IT, FunctionalState NewState); +FlagStatus FMC_GetFlagStatus(uint32_t FMC_Bank, uint32_t FMC_FLAG); +void FMC_ClearFlag(uint32_t FMC_Bank, uint32_t FMC_FLAG); +ITStatus FMC_GetITStatus(uint32_t FMC_Bank, uint32_t FMC_IT); +void FMC_ClearITPendingBit(uint32_t FMC_Bank, uint32_t FMC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_FMC_H */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |