diff options
Diffstat (limited to 'boards/base')
11 files changed, 4388 insertions, 0 deletions
diff --git a/boards/base/STM32F429i-Discovery/board.mk b/boards/base/STM32F429i-Discovery/board.mk new file mode 100644 index 00000000..c8dc7117 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/board.mk @@ -0,0 +1,8 @@ +GFXINC += $(GFXLIB)/boards/base/STM32F429i-Discovery +GFXSRC += $(GFXLIB)/boards/base/STM32F429i-Discovery/stm32f429i_discovery_sdram.c \ + $(GFXLIB)/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.c + +GFXDEFS += -DGFX_USE_OS_CHIBIOS=TRUE +include $(GFXLIB)/drivers/gdisp/STM32F429iDiscovery/driver.mk +#include $(GFXLIB)/drivers/ginput/touch/MCU/driver.mk +#include $(GFXLIB)/drivers/gaudio/vs1053/driver.mk diff --git a/boards/base/STM32F429i-Discovery/board_STM32F429iDiscovery.h b/boards/base/STM32F429i-Discovery/board_STM32F429iDiscovery.h new file mode 100644 index 00000000..e0b2dcb6 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/board_STM32F429iDiscovery.h @@ -0,0 +1,153 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +#include "stm32f4xx_fmc.h" +#include "stm32f429i_discovery_sdram.h" +#include <string.h> + +#define SPI_PORT &SPID5 +#define DC_PORT GPIOD +#define DC_PIN GPIOD_LCD_WRX + +static const SPIConfig spi_cfg = { + NULL, + GPIOC, + GPIOC_SPI5_LCD_CS, + ((1 << 3) & SPI_CR1_BR) | SPI_CR1_SSM | SPI_CR1_SSI | SPI_CR1_MSTR +}; + +static const ltdcConfig driverCfg = { + 240, 320, + 10, 2, + 20, 2, + 10, 4, + 0, + 0x000000, + { + (LLDCOLOR_TYPE *)SDRAM_BANK_ADDR, // frame + 240, 320, // width, height + 240 * LTDC_PIXELBYTES, // pitch + LTDC_PIXELFORMAT, // fmt + 0, 0, // x, y + 240, 320, // cx, cy + LTDC_COLOR_FUCHSIA, // defcolor + 0x980088, // keycolor + LTDC_BLEND_FIX1_FIX2, // blending + 0, // palette + 0, // palettelen + 0xFF, // alpha + LTDC_LEF_ENABLE // flags + }, + LTDC_UNUSED_LAYER_CONFIG +}; + +static inline void init_board(GDisplay *g) { + + // As we are not using multiple displays we set g->board to NULL as we don't use it. + g->board = 0; + + switch(g->controllerdisplay) { + case 0: // Set up for Display 0 + palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); // UART_TX + palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); // UART_RX + palSetPadMode(GPIOF, GPIOF_LCD_DCX, PAL_MODE_ALTERNATE(5)); + palSetPadMode(GPIOF, GPIOF_LCD_DE, PAL_MODE_ALTERNATE(14)); + +#define STM32_SAISRC_NOCLOCK (0 << 23) /**< No clock. */ +#define STM32_SAISRC_PLL (1 << 23) /**< SAI_CKIN is PLL. */ +#define STM32_SAIR_DIV2 (0 << 16) /**< R divided by 2. */ +#define STM32_SAIR_DIV4 (1 << 16) /**< R divided by 4. */ +#define STM32_SAIR_DIV8 (2 << 16) /**< R divided by 8. */ +#define STM32_SAIR_DIV16 (3 << 16) /**< R divided by 16. */ + +#define STM32_PLLSAIN_VALUE 192 +#define STM32_PLLSAIQ_VALUE 7 +#define STM32_PLLSAIR_VALUE 4 +#define STM32_PLLSAIR_POST STM32_SAIR_DIV4 + + /* PLLSAI activation.*/ + RCC->PLLSAICFGR = (STM32_PLLSAIN_VALUE << 6) | (STM32_PLLSAIR_VALUE << 28) | (STM32_PLLSAIQ_VALUE << 24); + RCC->DCKCFGR = (RCC->DCKCFGR & ~RCC_DCKCFGR_PLLSAIDIVR) | STM32_PLLSAIR_POST; + RCC->CR |= RCC_CR_PLLSAION; + + // Initialise the SDRAM + SDRAM_Init(); + + // Clear the SDRAM + memset((void *)SDRAM_BANK_ADDR, 0, 0x400000); + + spiStart(SPI_PORT, &spi_cfg); + break; + } +} + +static inline void post_init_board(GDisplay *g) { + (void) g; +} + +static inline void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + (void) state; + /* + if(state) { + // reset lcd + palClearPad(GPIOE, GPIOE_LCD_RST); + } else { + palSetPad(GPIOE, GPIOE_LCD_RST); + } + */ +} + +static inline void set_backlight(GDisplay *g, uint8_t percent) { + (void) g; + (void) percent; + // TODO: can probably pwm this + /* + if(percent) { + // turn back light on + palSetPad(GPIOE, GPIOE_LCD_BLED); + } else { + // turn off + palClearPad(GPIOE, GPIOE_LCD_BLED); + } + */ +} + +static inline void acquire_bus(GDisplay *g) { + (void) g; + + spiSelect(SPI_PORT); +} + +static inline void release_bus(GDisplay *g) { + (void) g; + + spiUnselect(SPI_PORT); +} + +static inline void write_index(GDisplay *g, uint8_t index) { + static uint8_t sindex; + (void) g; + + palClearPad(DC_PORT, DC_PIN); + sindex = index; + spiSend(SPI_PORT, 1, &sindex); +} + +static inline void write_data(GDisplay *g, uint8_t data) { + static uint8_t sdata; + (void) g; + + palSetPad(DC_PORT, DC_PIN); + sdata = data; + spiSend(SPI_PORT, 1, &sdata); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/boards/base/STM32F429i-Discovery/example_chibios_2.x/Makefile b/boards/base/STM32F429i-Discovery/example_chibios_2.x/Makefile new file mode 100644 index 00000000..2512c62a --- /dev/null +++ b/boards/base/STM32F429i-Discovery/example_chibios_2.x/Makefile @@ -0,0 +1,56 @@ +# Possible Targets: all clean Debug cleanDebug Release cleanRelease + +############################################################################################## +# Settings +# + +# General settings + # See $(GFXLIB)/tools/gmake_scripts/readme.txt for the list of variables + OPT_OS = chibios + OPT_THUMB = yes + OPT_LINK_OPTIMIZE = yes + OPT_CPU = stm32m4 + +# uGFX settings + # See $(GFXLIB)/tools/gmake_scripts/library_ugfx.mk for the list of variables + GFXLIB = ../uGFX + GFXBOARD = STM32F429i-Discovery + GFXDEMO = modules/gdisp/basics + +# ChibiOS settings +ifeq ($(OPT_OS),chibios) + # See $(GFXLIB)/tools/gmake_scripts/os_chibios.mk for the list of variables + CHIBIOS = ../ChibiOS + CHIBIOS_BOARD = ST_STM32F429I_DISCOVERY + CHIBIOS_PLATFORM = STM32F4xx + CHIBIOS_PORT = GCC/ARMCMx/STM32F4xx + CHIBIOS_LDSCRIPT = STM32F407xG.ld +endif + +############################################################################################## +# Set these for your project +# + +ARCH = arm-none-eabi- +SRCFLAGS = -ggdb -O0 +CFLAGS = +CXXFLAGS = -fno-rtti +ASFLAGS = +LDFLAGS = + +SRC = +OBJS = +DEFS = +LIBS = +INCPATH = +LIBPATH = +LDSCRIPT = + +############################################################################################## +# These should be at the end +# + +include $(GFXLIB)/tools/gmake_scripts/library_ugfx.mk +include $(GFXLIB)/tools/gmake_scripts/os_$(OPT_OS).mk +include $(GFXLIB)/tools/gmake_scripts/compiler_gcc.mk +# *** EOF *** diff --git a/boards/base/STM32F429i-Discovery/example_chibios_2.x/chconf.h b/boards/base/STM32F429i-Discovery/example_chibios_2.x/chconf.h new file mode 100644 index 00000000..f4682cb9 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/example_chibios_2.x/chconf.h @@ -0,0 +1,531 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) +#define CH_FREQUENCY 1000 +#endif + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + */ +#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) +#define CH_TIME_QUANTUM 20 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_USE_MEMCORE. + */ +#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) +#define CH_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread automatically. The application has + * then the responsibility to do one of the following: + * - Spawn a custom idle thread at priority @p IDLEPRIO. + * - Change the main() thread priority to @p IDLEPRIO then enter + * an endless loop. In this scenario the @p main() thread acts as + * the idle thread. + * . + * @note Unless an idle thread is spawned the @p main() thread must not + * enter a sleep state. + */ +#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) +#define CH_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) +#define CH_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) +#define CH_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) +#define CH_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Atomic semaphore API. + * @details If enabled then the semaphores the @p chSemSignalWait() API + * is included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) +#define CH_USE_SEMSW TRUE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) +#define CH_USE_MUTEXES TRUE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MUTEXES. + */ +#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_CONDVARS. + */ +#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) +#define CH_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_EVENTS. + */ +#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_MESSAGES. + */ +#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) +#define CH_USE_MAILBOXES TRUE +#endif + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) +#define CH_USE_QUEUES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) +#define CH_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or + * @p CH_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) +#define CH_USE_HEAP TRUE +#endif + +/** + * @brief C-runtime allocator. + * @details If enabled the the heap allocator APIs just wrap the C-runtime + * @p malloc() and @p free() functions. + * + * @note The default is @p FALSE. + * @note Requires @p CH_USE_HEAP. + * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the + * appropriate documentation. + */ +#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) +#define CH_USE_MALLOC_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) +#define CH_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_WAITEXIT. + * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. + */ +#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) +#define CH_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_TRACE FALSE +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p Thread structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p TRUE. + * @note This debug option is defaulted to TRUE because it is required by + * some test cases into the test suite. + */ +#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) +#define CH_DBG_THREADS_PROFILING TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p Thread structure. + */ +#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) +#define THREAD_EXT_FIELDS \ + /* Add threads custom fields here.*/ +#endif + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) +#define THREAD_EXT_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} +#endif + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) +#define THREAD_EXT_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} +#endif + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) +#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} +#endif + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) +#define IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} +#endif + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) +#define SYSTEM_TICK_EVENT_HOOK() { \ + /* System tick event code here.*/ \ +} +#endif + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) +#define SYSTEM_HALT_HOOK() { \ + /* System halt code here.*/ \ +} +#endif + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/boards/base/STM32F429i-Discovery/example_chibios_2.x/halconf.h b/boards/base/STM32F429i-Discovery/example_chibios_2.x/halconf.h new file mode 100644 index 00000000..e0ef55fe --- /dev/null +++ b/boards/base/STM32F429i-Discovery/example_chibios_2.x/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM FALSE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/boards/base/STM32F429i-Discovery/example_chibios_2.x/mcuconf.h b/boards/base/STM32F429i-Discovery/example_chibios_2.x/mcuconf.h new file mode 100644 index 00000000..d0b1d6a4 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/example_chibios_2.x/mcuconf.h @@ -0,0 +1,303 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() +#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() +#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_USE_SPI4 FALSE +#define STM32_SPI_USE_SPI5 TRUE +#define STM32_SPI_USE_SPI6 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_SPI_SPI6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) +#define STM32_SPI_SPI6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI4_DMA_PRIORITY 1 +#define STM32_SPI_SPI5_DMA_PRIORITY 1 +#define STM32_SPI_SPI6_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_SPI4_IRQ_PRIORITY 10 +#define STM32_SPI_SPI5_IRQ_PRIORITY 10 +#define STM32_SPI_SPI6_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/boards/base/STM32F429i-Discovery/example_chibios_2.x/openocd.cfg b/boards/base/STM32F429i-Discovery/example_chibios_2.x/openocd.cfg new file mode 100644 index 00000000..f8b6a6f5 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/example_chibios_2.x/openocd.cfg @@ -0,0 +1,81 @@ +# This is a script file for OpenOCD 0.7.0 +# +# It is set up for the Mikromedia-STM32M4 board using the ST-Link JTAG adaptor. +# +# Assuming the current directory is your project directory containing this openocd.cfg file... +# +# To program your device: +# +# openocd -f openocd.cfg -c "Burn yourfile.bin" -c shutdown +# +# To debug your device: +# +# openocd +# (This will run openocd in gdb server debug mode. Leave it running in the background) +# +# gdb yourfile.elf +# (To start gdb. Then run the following commands in gdb...) +# +# target remote 127.0.0.1:3333 +# monitor Debug +# stepi +# (This last stepi resynchronizes gdb). +# +# If you want to reprogram from within gdb: +# +# monitor Burn yourfile.bin +# + +echo "" +echo "##### Loading debugger..." +source [find interface/stlink-v2.cfg] + +echo "" +echo "##### Loading CPU..." +source [find target/stm32f4x_stlink.cfg] + +echo "" +echo "##### Configuring..." +reset_config srst_only srst_nogate +#cortex_m maskisr (auto|on|off) +#cortex_m vector_catch [all|none|list] +#cortex_m reset_config (srst|sysresetreq|vectreset) +#gdb_breakpoint_override hard + +proc Debug { } { + echo "" + echo "##### Debug Session Connected..." + reset init + echo "Ready..." +} + +proc Burn {file} { + echo "" + echo "##### Burning $file to device..." + halt + # Due to an issue with the combination of the ST-Link adapters and OpenOCD + # applying the stm32f2x unlock 0 command actaully applies read protection - VERY BAD! + # If this happens to you - use the ST-Link utility to set the option byte back to normal. + # If you are using a different debugger eg a FT2232 based adapter you can uncomment the line below. + #stm32f2x unlock 0 + flash protect 0 0 last off + reset init + flash write_image erase $file 0x08000000 + verify_image $file 0x0 + #flash protect 0 0 last on + reset + echo "Burning Complete!" +} + +echo "" +echo "##### Leaving Configuration Mode..." +init +reset init +flash probe 0 +flash banks +#flash info 0 + +echo "" +echo "##### Waiting for debug connections..." + + diff --git a/boards/base/STM32F429i-Discovery/stm32f429i_discovery_sdram.c b/boards/base/STM32F429i-Discovery/stm32f429i_discovery_sdram.c new file mode 100644 index 00000000..44e61415 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/stm32f429i_discovery_sdram.c @@ -0,0 +1,332 @@ +#include "stm32f429i_discovery_sdram.h" +#include "stm32f4xx_fmc.h" +#include "ch.h" +#include "hal.h" + +/** + * @brief Configures the FMC and GPIOs to interface with the SDRAM memory. + * This function must be called before any read/write operation + * on the SDRAM. + * @param None + * @retval None + */ +void SDRAM_Init(void) +{ + FMC_SDRAMInitTypeDef FMC_SDRAMInitStructure; + FMC_SDRAMTimingInitTypeDef FMC_SDRAMTimingInitStructure; + + /* Enable FMC clock */ + rccEnableAHB3(RCC_AHB3ENR_FMCEN, FALSE); + +/* FMC Configuration ---------------------------------------------------------*/ +/* FMC SDRAM Bank configuration */ + /* Timing configuration for 84 Mhz of SD clock frequency (168Mhz/2) */ + /* TMRD: 2 Clock cycles */ + FMC_SDRAMTimingInitStructure.FMC_LoadToActiveDelay = 2; + /* TXSR: min=70ns (6x11.90ns) */ + FMC_SDRAMTimingInitStructure.FMC_ExitSelfRefreshDelay = 7; + /* TRAS: min=42ns (4x11.90ns) max=120k (ns) */ + FMC_SDRAMTimingInitStructure.FMC_SelfRefreshTime = 4; + /* TRC: min=63 (6x11.90ns) */ + FMC_SDRAMTimingInitStructure.FMC_RowCycleDelay = 7; + /* TWR: 2 Clock cycles */ + FMC_SDRAMTimingInitStructure.FMC_WriteRecoveryTime = 2; + /* TRP: 15ns => 2x11.90ns */ + FMC_SDRAMTimingInitStructure.FMC_RPDelay = 2; + /* TRCD: 15ns => 2x11.90ns */ + FMC_SDRAMTimingInitStructure.FMC_RCDDelay = 2; + +/* FMC SDRAM control configuration */ + FMC_SDRAMInitStructure.FMC_Bank = FMC_Bank2_SDRAM; + /* Row addressing: [7:0] */ + FMC_SDRAMInitStructure.FMC_ColumnBitsNumber = FMC_ColumnBits_Number_8b; + /* Column addressing: [11:0] */ + FMC_SDRAMInitStructure.FMC_RowBitsNumber = FMC_RowBits_Number_12b; + FMC_SDRAMInitStructure.FMC_SDMemoryDataWidth = SDRAM_MEMORY_WIDTH; + FMC_SDRAMInitStructure.FMC_InternalBankNumber = FMC_InternalBank_Number_4; + FMC_SDRAMInitStructure.FMC_CASLatency = SDRAM_CAS_LATENCY; + FMC_SDRAMInitStructure.FMC_WriteProtection = FMC_Write_Protection_Disable; + FMC_SDRAMInitStructure.FMC_SDClockPeriod = SDCLOCK_PERIOD; + FMC_SDRAMInitStructure.FMC_ReadBurst = SDRAM_READBURST; + FMC_SDRAMInitStructure.FMC_ReadPipeDelay = FMC_ReadPipe_Delay_1; + FMC_SDRAMInitStructure.FMC_SDRAMTimingStruct = &FMC_SDRAMTimingInitStructure; + + /* FMC SDRAM bank initialization */ + FMC_SDRAMInit(&FMC_SDRAMInitStructure); + + /* FMC SDRAM device initialization sequence */ + SDRAM_InitSequence(); + +} + +/*-- GPIOs Configuration -----------------------------------------------------*/ +/* + +-------------------+--------------------+--------------------+--------------------+ + + SDRAM pins assignment + + +-------------------+--------------------+--------------------+--------------------+ + | PD0 <-> FMC_D2 | PE0 <-> FMC_NBL0 | PF0 <-> FMC_A0 | PG0 <-> FMC_A10 | + | PD1 <-> FMC_D3 | PE1 <-> FMC_NBL1 | PF1 <-> FMC_A1 | PG1 <-> FMC_A11 | + | PD8 <-> FMC_D13 | PE7 <-> FMC_D4 | PF2 <-> FMC_A2 | PG8 <-> FMC_SDCLK | + | PD9 <-> FMC_D14 | PE8 <-> FMC_D5 | PF3 <-> FMC_A3 | PG15 <-> FMC_NCAS | + | PD10 <-> FMC_D15 | PE9 <-> FMC_D6 | PF4 <-> FMC_A4 |--------------------+ + | PD14 <-> FMC_D0 | PE10 <-> FMC_D7 | PF5 <-> FMC_A5 | + | PD15 <-> FMC_D1 | PE11 <-> FMC_D8 | PF11 <-> FMC_NRAS | + +-------------------| PE12 <-> FMC_D9 | PF12 <-> FMC_A6 | + | PE13 <-> FMC_D10 | PF13 <-> FMC_A7 | + | PE14 <-> FMC_D11 | PF14 <-> FMC_A8 | + | PE15 <-> FMC_D12 | PF15 <-> FMC_A9 | + +-------------------+--------------------+--------------------+ + | PB5 <-> FMC_SDCKE1| + | PB6 <-> FMC_SDNE1 | + | PC0 <-> FMC_SDNWE | + +-------------------+ + +*/ + +// /* Common GPIO configuration */ +// GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; +// GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; +// GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; +// GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; +// +// /* GPIOB configuration */ +// GPIO_PinAFConfig(GPIOB, GPIO_PinSource5 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOB, GPIO_PinSource6 , GPIO_AF_FMC); +// +// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6; +// +// GPIO_Init(GPIOB, &GPIO_InitStructure); +// +// /* GPIOC configuration */ +// GPIO_PinAFConfig(GPIOC, GPIO_PinSource0 , GPIO_AF_FMC); +// +// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; +// +// GPIO_Init(GPIOC, &GPIO_InitStructure); +// +// /* GPIOD configuration */ +// GPIO_PinAFConfig(GPIOD, GPIO_PinSource0, GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOD, GPIO_PinSource1, GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOD, GPIO_PinSource8, GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOD, GPIO_PinSource9, GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOD, GPIO_PinSource10, GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOD, GPIO_PinSource14, GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOD, GPIO_PinSource15, GPIO_AF_FMC); +// +// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_8 | +// GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_14 | +// GPIO_Pin_15; +// +// GPIO_Init(GPIOD, &GPIO_InitStructure); +// +// /* GPIOE configuration */ +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource0 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource1 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource7 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource8 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource9 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource10 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource11 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource12 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource13 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource14 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOE, GPIO_PinSource15 , GPIO_AF_FMC); +// +// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_7 | +// GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | +// GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | +// GPIO_Pin_14 | GPIO_Pin_15; +// +// GPIO_Init(GPIOE, &GPIO_InitStructure); +// +// /* GPIOF configuration */ +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource0 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource1 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource2 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource3 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource4 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource5 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource11 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource12 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource13 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource14 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOF, GPIO_PinSource15 , GPIO_AF_FMC); +// +// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | +// GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | +// GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | +// GPIO_Pin_14 | GPIO_Pin_15; +// +// GPIO_Init(GPIOF, &GPIO_InitStructure); +// +// /* GPIOG configuration */ +// GPIO_PinAFConfig(GPIOG, GPIO_PinSource0 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOG, GPIO_PinSource1 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOG, GPIO_PinSource4 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOG, GPIO_PinSource5 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOG, GPIO_PinSource8 , GPIO_AF_FMC); +// GPIO_PinAFConfig(GPIOG, GPIO_PinSource15 , GPIO_AF_FMC); +// +// +// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_4 | +// GPIO_Pin_5 | GPIO_Pin_8 | GPIO_Pin_15; +// +// GPIO_Init(GPIOG, &GPIO_InitStructure); + +/** + * @brief Executes the SDRAM memory initialization sequence. + * @param None. + * @retval None. + */ +void SDRAM_InitSequence(void) +{ + FMC_SDRAMCommandTypeDef FMC_SDRAMCommandStructure; + uint32_t tmpr = 0; + +/* Step 3 --------------------------------------------------------------------*/ + /* Configure a clock configuration enable command */ + FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_CLK_Enabled; + FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank2; + FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 1; + FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = 0; + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } + /* Send the command */ + FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); + + //In the ST example, this is 100ms, but the 429 RM says 100us is typical, and + //the ISSI datasheet confirms this. 1ms seems plenty, and is much shorter than + //refresh interval, meaning we won't risk losing contents if the SDRAM is in self-refresh + //mode +/* Step 4 --------------------------------------------------------------------*/ + /* Insert 1 ms delay */ + chThdSleepMilliseconds(1); + +/* Step 5 --------------------------------------------------------------------*/ + /* Configure a PALL (precharge all) command */ + FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_PALL; + FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank2; + FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 1; + FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = 0; + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } + /* Send the command */ + FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); + +/* Step 6 --------------------------------------------------------------------*/ + /* Configure a Auto-Refresh command */ + FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_AutoRefresh; + FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank2; + FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 4; + FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = 0; + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } + /* Send the first command */ + FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); + + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } + /* Send the second command */ + FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); + +/* Step 7 --------------------------------------------------------------------*/ + /* Program the external memory mode register */ + tmpr = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_2 | + SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL | + SDRAM_MODEREG_CAS_LATENCY_3 | + SDRAM_MODEREG_OPERATING_MODE_STANDARD | + SDRAM_MODEREG_WRITEBURST_MODE_SINGLE; + + /* Configure a load Mode register command*/ + FMC_SDRAMCommandStructure.FMC_CommandMode = FMC_Command_Mode_LoadMode; + FMC_SDRAMCommandStructure.FMC_CommandTarget = FMC_Command_Target_bank2; + FMC_SDRAMCommandStructure.FMC_AutoRefreshNumber = 1; + FMC_SDRAMCommandStructure.FMC_ModeRegisterDefinition = tmpr; + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } + /* Send the command */ + FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); + +/* Step 8 --------------------------------------------------------------------*/ + + /* Set the refresh rate counter */ + /* (7.81 us x Freq) - 20 */ + /* Set the device refresh counter */ + FMC_SetRefreshCount(683); + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } +} + + +/** + * @brief Writes a Entire-word buffer to the SDRAM memory. + * @param pBuffer: pointer to buffer. + * @param uwWriteAddress: SDRAM memory internal address from which the data will be + * written. + * @param uwBufferSize: number of words to write. + * @retval None. + */ +void SDRAM_WriteBuffer(uint32_t* pBuffer, uint32_t uwWriteAddress, uint32_t uwBufferSize) +{ + __IO uint32_t write_pointer = (uint32_t)uwWriteAddress; + + /* Disable write protection */ + FMC_SDRAMWriteProtectionConfig(FMC_Bank2_SDRAM, DISABLE); + + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } + + /* While there is data to write */ + for (; uwBufferSize != 0; uwBufferSize--) + { + /* Transfer data to the memory */ + *(uint32_t *) (SDRAM_BANK_ADDR + write_pointer) = *pBuffer++; + + /* Increment the address*/ + write_pointer += 4; + } + +} + +/** + * @brief Reads data buffer from the SDRAM memory. + * @param pBuffer: pointer to buffer. + * @param ReadAddress: SDRAM memory internal address from which the data will be + * read. + * @param uwBufferSize: number of words to write. + * @retval None. + */ +void SDRAM_ReadBuffer(uint32_t* pBuffer, uint32_t uwReadAddress, uint32_t uwBufferSize) +{ + __IO uint32_t write_pointer = (uint32_t)uwReadAddress; + + + /* Wait until the SDRAM controller is ready */ + while(FMC_GetFlagStatus(FMC_Bank2_SDRAM, FMC_FLAG_Busy) != RESET) + { + } + + /* Read data */ + for(; uwBufferSize != 0x00; uwBufferSize--) + { + *pBuffer++ = *(__IO uint32_t *)(SDRAM_BANK_ADDR + write_pointer ); + + /* Increment the address*/ + write_pointer += 4; + } +} + diff --git a/boards/base/STM32F429i-Discovery/stm32f429i_discovery_sdram.h b/boards/base/STM32F429i-Discovery/stm32f429i_discovery_sdram.h new file mode 100644 index 00000000..fba5115d --- /dev/null +++ b/boards/base/STM32F429i-Discovery/stm32f429i_discovery_sdram.h @@ -0,0 +1,96 @@ +/** + ****************************************************************************** + * @file stm32f429i_discovery_sdram.h + * @author MCD Application Team + * @version V1.0.0 + * @date 20-September-2013 + * @brief This file contains all the functions prototypes for the + * stm324x9i_disco_sdram.c driver. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32429I_DISCO_SDRAM_H +#define __STM32429I_DISCO_SDRAM_H + +#ifdef __cplusplus + extern "C" { +#endif + +//FIXME this should not be needed +#define STM32F429_439xx + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** + * @brief FMC SDRAM Bank address + */ +#define SDRAM_BANK_ADDR ((uint32_t)0xD0000000) + +/** + * @brief FMC SDRAM Memory Width + */ +/* #define SDRAM_MEMORY_WIDTH FMC_SDMemory_Width_8b */ +#define SDRAM_MEMORY_WIDTH FMC_SDMemory_Width_16b + +/** + * @brief FMC SDRAM CAS Latency + */ +/* #define SDRAM_CAS_LATENCY FMC_CAS_Latency_2 */ +#define SDRAM_CAS_LATENCY FMC_CAS_Latency_3 + +/** + * @brief FMC SDRAM Memory clock period + */ +#define SDCLOCK_PERIOD FMC_SDClock_Period_2 /* Default configuration used with LCD */ +/* #define SDCLOCK_PERIOD FMC_SDClock_Period_3 */ + +/** + * @brief FMC SDRAM Memory Read Burst feature + */ +#define SDRAM_READBURST FMC_Read_Burst_Disable /* Default configuration used with LCD */ +/* #define SDRAM_READBURST FMC_Read_Burst_Enable */ + +/** + * @brief FMC SDRAM Mode definition register defines + */ +#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000) +#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001) +#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002) +#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004) +#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000) +#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008) +#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020) +#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030) +#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000) +#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000) +#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200) + +void SDRAM_Init(void); +void SDRAM_InitSequence(void); +void SDRAM_WriteBuffer(uint32_t* pBuffer, uint32_t uwWriteAddress, uint32_t uwBufferSize); +void SDRAM_ReadBuffer(uint32_t* pBuffer, uint32_t uwReadAddress, uint32_t uwBufferSize); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.c b/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.c new file mode 100644 index 00000000..10e73262 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.c @@ -0,0 +1,1376 @@ +/** + ****************************************************************************** + * @file stm32f4xx_fmc.c + * @author MCD Application Team + * @version V1.2.1 + * @date 19-September-2013 + * @brief This file provides firmware functions to manage the following + * functionalities of the FMC peripheral: + * + Interface with SRAM, PSRAM, NOR and OneNAND memories + * + Interface with NAND memories + * + Interface with 16-bit PC Card compatible memories + * + Interface with SDRAM memories + * + Interrupts and flags management + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_fmc.h" +#include "ch.h" +//#include "stm32f4xx_rcc.h" + +#define assert_param(expr) chDbgAssert(expr,"STPeriph FMC","") + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup FMC + * @brief FMC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* --------------------- FMC registers bit mask ---------------------------- */ +/* FMC BCRx Mask */ +#define BCR_MBKEN_SET ((uint32_t)0x00000001) +#define BCR_MBKEN_RESET ((uint32_t)0x000FFFFE) +#define BCR_FACCEN_SET ((uint32_t)0x00000040) + +/* FMC PCRx Mask */ +#define PCR_PBKEN_SET ((uint32_t)0x00000004) +#define PCR_PBKEN_RESET ((uint32_t)0x000FFFFB) +#define PCR_ECCEN_SET ((uint32_t)0x00000040) +#define PCR_ECCEN_RESET ((uint32_t)0x000FFFBF) +#define PCR_MEMORYTYPE_NAND ((uint32_t)0x00000008) + +/* FMC SDCRx write protection Mask*/ +#define SDCR_WriteProtection_RESET ((uint32_t)0x00007DFF) + +/* FMC SDCMR Mask*/ +#define SDCMR_CTB1_RESET ((uint32_t)0x003FFFEF) +#define SDCMR_CTB2_RESET ((uint32_t)0x003FFFF7) +#define SDCMR_CTB1_2_RESET ((uint32_t)0x003FFFE7) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup FMC_Private_Functions + * @{ + */ + +/** @defgroup FMC_Group1 NOR/SRAM Controller functions + * @brief NOR/SRAM Controller functions + * +@verbatim + =============================================================================== + ##### NOR and SRAM Controller functions ##### + =============================================================================== + + [..] The following sequence should be followed to configure the FMC to interface + with SRAM, PSRAM, NOR or OneNAND memory connected to the NOR/SRAM Bank: + + (#) Enable the clock for the FMC and associated GPIOs using the following functions: + RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FMC, ENABLE); + RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + + (#) FMC pins configuration + (++) Connect the involved FMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FMC); + (++) Configure these FMC pins in alternate function mode by calling the function + GPIO_Init(); + + (#) Declare a FMC_NORSRAMInitTypeDef structure, for example: + FMC_NORSRAMInitTypeDef FMC_NORSRAMInitStructure; + and fill the FMC_NORSRAMInitStructure variable with the allowed values of + the structure member. + + (#) Initialize the NOR/SRAM Controller by calling the function + FMC_NORSRAMInit(&FMC_NORSRAMInitStructure); + + (#) Then enable the NOR/SRAM Bank, for example: + FMC_NORSRAMCmd(FMC_Bank1_NORSRAM2, ENABLE); + + (#) At this stage you can read/write from/to the memory connected to the NOR/SRAM Bank. + +@endverbatim + * @{ + */ + +/** + * @brief De-initializes the FMC NOR/SRAM Banks registers to their default + * reset values. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank1_NORSRAM1: FMC Bank1 NOR/SRAM1 + * @arg FMC_Bank1_NORSRAM2: FMC Bank1 NOR/SRAM2 + * @arg FMC_Bank1_NORSRAM3: FMC Bank1 NOR/SRAM3 + * @arg FMC_Bank1_NORSRAM4: FMC Bank1 NOR/SRAM4 + * @retval None + */ +void FMC_NORSRAMDeInit(uint32_t FMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FMC_NORSRAM_BANK(FMC_Bank)); + + /* FMC_Bank1_NORSRAM1 */ + if(FMC_Bank == FMC_Bank1_NORSRAM1) + { + FMC_Bank1->BTCR[FMC_Bank] = 0x000030DB; + } + /* FMC_Bank1_NORSRAM2, FMC_Bank1_NORSRAM3 or FMC_Bank1_NORSRAM4 */ + else + { + FMC_Bank1->BTCR[FMC_Bank] = 0x000030D2; + } + FMC_Bank1->BTCR[FMC_Bank + 1] = 0x0FFFFFFF; + FMC_Bank1E->BWTR[FMC_Bank] = 0x0FFFFFFF; +} + +/** + * @brief Initializes the FMC NOR/SRAM Banks according to the specified + * parameters in the FMC_NORSRAMInitStruct. + * @param FMC_NORSRAMInitStruct : pointer to a FMC_NORSRAMInitTypeDef structure + * that contains the configuration information for the FMC NOR/SRAM + * specified Banks. + * @retval None + */ +void FMC_NORSRAMInit(FMC_NORSRAMInitTypeDef* FMC_NORSRAMInitStruct) +{ + uint32_t tmpr = 0; + + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_BANK(FMC_NORSRAMInitStruct->FMC_Bank)); + assert_param(IS_FMC_MUX(FMC_NORSRAMInitStruct->FMC_DataAddressMux)); + assert_param(IS_FMC_MEMORY(FMC_NORSRAMInitStruct->FMC_MemoryType)); + assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(FMC_NORSRAMInitStruct->FMC_MemoryDataWidth)); + assert_param(IS_FMC_BURSTMODE(FMC_NORSRAMInitStruct->FMC_BurstAccessMode)); + assert_param(IS_FMC_WAIT_POLARITY(FMC_NORSRAMInitStruct->FMC_WaitSignalPolarity)); + assert_param(IS_FMC_WRAP_MODE(FMC_NORSRAMInitStruct->FMC_WrapMode)); + assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(FMC_NORSRAMInitStruct->FMC_WaitSignalActive)); + assert_param(IS_FMC_WRITE_OPERATION(FMC_NORSRAMInitStruct->FMC_WriteOperation)); + assert_param(IS_FMC_WAITE_SIGNAL(FMC_NORSRAMInitStruct->FMC_WaitSignal)); + assert_param(IS_FMC_EXTENDED_MODE(FMC_NORSRAMInitStruct->FMC_ExtendedMode)); + assert_param(IS_FMC_ASYNWAIT(FMC_NORSRAMInitStruct->FMC_AsynchronousWait)); + assert_param(IS_FMC_WRITE_BURST(FMC_NORSRAMInitStruct->FMC_WriteBurst)); + assert_param(IS_FMC_CONTINOUS_CLOCK(FMC_NORSRAMInitStruct->FMC_ContinousClock)); + assert_param(IS_FMC_ADDRESS_SETUP_TIME(FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AddressSetupTime)); + assert_param(IS_FMC_ADDRESS_HOLD_TIME(FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AddressHoldTime)); + assert_param(IS_FMC_DATASETUP_TIME(FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_DataSetupTime)); + assert_param(IS_FMC_TURNAROUND_TIME(FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_BusTurnAroundDuration)); + assert_param(IS_FMC_CLK_DIV(FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_CLKDivision)); + assert_param(IS_FMC_DATA_LATENCY(FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_DataLatency)); + assert_param(IS_FMC_ACCESS_MODE(FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AccessMode)); + + /* NOR/SRAM Bank control register configuration */ + FMC_Bank1->BTCR[FMC_NORSRAMInitStruct->FMC_Bank] = + (uint32_t)FMC_NORSRAMInitStruct->FMC_DataAddressMux | + FMC_NORSRAMInitStruct->FMC_MemoryType | + FMC_NORSRAMInitStruct->FMC_MemoryDataWidth | + FMC_NORSRAMInitStruct->FMC_BurstAccessMode | + FMC_NORSRAMInitStruct->FMC_WaitSignalPolarity | + FMC_NORSRAMInitStruct->FMC_WrapMode | + FMC_NORSRAMInitStruct->FMC_WaitSignalActive | + FMC_NORSRAMInitStruct->FMC_WriteOperation | + FMC_NORSRAMInitStruct->FMC_WaitSignal | + FMC_NORSRAMInitStruct->FMC_ExtendedMode | + FMC_NORSRAMInitStruct->FMC_AsynchronousWait | + FMC_NORSRAMInitStruct->FMC_WriteBurst | + FMC_NORSRAMInitStruct->FMC_ContinousClock; + + + if(FMC_NORSRAMInitStruct->FMC_MemoryType == FMC_MemoryType_NOR) + { + FMC_Bank1->BTCR[FMC_NORSRAMInitStruct->FMC_Bank] |= (uint32_t)BCR_FACCEN_SET; + } + + /* Configure Continuous clock feature when bank2..4 is used */ + if((FMC_NORSRAMInitStruct->FMC_ContinousClock == FMC_CClock_SyncAsync) && (FMC_NORSRAMInitStruct->FMC_Bank != FMC_Bank1_NORSRAM1)) + { + tmpr = (uint32_t)((FMC_Bank1->BTCR[FMC_Bank1_NORSRAM1+1]) & ~(((uint32_t)0x0F) << 20)); + + FMC_Bank1->BTCR[FMC_Bank1_NORSRAM1] |= FMC_NORSRAMInitStruct->FMC_ContinousClock; + FMC_Bank1->BTCR[FMC_Bank1_NORSRAM1] |= FMC_BurstAccessMode_Enable; + FMC_Bank1->BTCR[FMC_Bank1_NORSRAM1+1] = (uint32_t)(tmpr | (((FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_CLKDivision)-1) << 20)); + } + + /* NOR/SRAM Bank timing register configuration */ + FMC_Bank1->BTCR[FMC_NORSRAMInitStruct->FMC_Bank+1] = + (uint32_t)FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AddressSetupTime | + (FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AddressHoldTime << 4) | + (FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_DataSetupTime << 8) | + (FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_BusTurnAroundDuration << 16) | + ((FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_CLKDivision) << 20) | + ((FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_DataLatency) << 24) | + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AccessMode; + + /* NOR/SRAM Bank timing register for write configuration, if extended mode is used */ + if(FMC_NORSRAMInitStruct->FMC_ExtendedMode == FMC_ExtendedMode_Enable) + { + assert_param(IS_FMC_ADDRESS_SETUP_TIME(FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AddressSetupTime)); + assert_param(IS_FMC_ADDRESS_HOLD_TIME(FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AddressHoldTime)); + assert_param(IS_FMC_DATASETUP_TIME(FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_DataSetupTime)); + assert_param(IS_FMC_CLK_DIV(FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_CLKDivision)); + assert_param(IS_FMC_DATA_LATENCY(FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_DataLatency)); + assert_param(IS_FMC_ACCESS_MODE(FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AccessMode)); + + FMC_Bank1E->BWTR[FMC_NORSRAMInitStruct->FMC_Bank] = + (uint32_t)FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AddressSetupTime | + (FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AddressHoldTime << 4 )| + (FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_DataSetupTime << 8) | + ((FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_CLKDivision) << 20) | + ((FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_DataLatency) << 24) | + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AccessMode; + } + else + { + FMC_Bank1E->BWTR[FMC_NORSRAMInitStruct->FMC_Bank] = 0x0FFFFFFF; + } + +} + +/** + * @brief Fills each FMC_NORSRAMInitStruct member with its default value. + * @param FMC_NORSRAMInitStruct: pointer to a FMC_NORSRAMInitTypeDef structure + * which will be initialized. + * @retval None + */ +void FMC_NORSRAMStructInit(FMC_NORSRAMInitTypeDef* FMC_NORSRAMInitStruct) +{ + /* Reset NOR/SRAM Init structure parameters values */ + FMC_NORSRAMInitStruct->FMC_Bank = FMC_Bank1_NORSRAM1; + FMC_NORSRAMInitStruct->FMC_DataAddressMux = FMC_DataAddressMux_Enable; + FMC_NORSRAMInitStruct->FMC_MemoryType = FMC_MemoryType_SRAM; + FMC_NORSRAMInitStruct->FMC_MemoryDataWidth = FMC_NORSRAM_MemoryDataWidth_16b; + FMC_NORSRAMInitStruct->FMC_BurstAccessMode = FMC_BurstAccessMode_Disable; + FMC_NORSRAMInitStruct->FMC_AsynchronousWait = FMC_AsynchronousWait_Disable; + FMC_NORSRAMInitStruct->FMC_WaitSignalPolarity = FMC_WaitSignalPolarity_Low; + FMC_NORSRAMInitStruct->FMC_WrapMode = FMC_WrapMode_Disable; + FMC_NORSRAMInitStruct->FMC_WaitSignalActive = FMC_WaitSignalActive_BeforeWaitState; + FMC_NORSRAMInitStruct->FMC_WriteOperation = FMC_WriteOperation_Enable; + FMC_NORSRAMInitStruct->FMC_WaitSignal = FMC_WaitSignal_Enable; + FMC_NORSRAMInitStruct->FMC_ExtendedMode = FMC_ExtendedMode_Disable; + FMC_NORSRAMInitStruct->FMC_WriteBurst = FMC_WriteBurst_Disable; + FMC_NORSRAMInitStruct->FMC_ContinousClock = FMC_CClock_SyncOnly; + + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AddressSetupTime = 15; + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AddressHoldTime = 15; + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_DataSetupTime = 255; + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_BusTurnAroundDuration = 15; + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_CLKDivision = 15; + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_DataLatency = 15; + FMC_NORSRAMInitStruct->FMC_ReadWriteTimingStruct->FMC_AccessMode = FMC_AccessMode_A; + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AddressSetupTime = 15; + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AddressHoldTime = 15; + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_DataSetupTime = 255; + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_BusTurnAroundDuration = 15; + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_CLKDivision = 15; + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_DataLatency = 15; + FMC_NORSRAMInitStruct->FMC_WriteTimingStruct->FMC_AccessMode = FMC_AccessMode_A; +} + +/** + * @brief Enables or disables the specified NOR/SRAM Memory Bank. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank1_NORSRAM1: FMC Bank1 NOR/SRAM1 + * @arg FMC_Bank1_NORSRAM2: FMC Bank1 NOR/SRAM2 + * @arg FMC_Bank1_NORSRAM3: FMC Bank1 NOR/SRAM3 + * @arg FMC_Bank1_NORSRAM4: FMC Bank1 NOR/SRAM4 + * @param NewState: new state of the FMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FMC_NORSRAMCmd(uint32_t FMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FMC_NORSRAM_BANK(FMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ + FMC_Bank1->BTCR[FMC_Bank] |= BCR_MBKEN_SET; + } + else + { + /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ + FMC_Bank1->BTCR[FMC_Bank] &= BCR_MBKEN_RESET; + } +} +/** + * @} + */ + +/** @defgroup FMC_Group2 NAND Controller functions + * @brief NAND Controller functions + * +@verbatim + =============================================================================== + ##### NAND Controller functions ##### + =============================================================================== + + [..] The following sequence should be followed to configure the FMC to interface + with 8-bit or 16-bit NAND memory connected to the NAND Bank: + + (#) Enable the clock for the FMC and associated GPIOs using the following functions: + (++) RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FMC, ENABLE); + (++) RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + + (#) FMC pins configuration + (++) Connect the involved FMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FMC); + (++) Configure these FMC pins in alternate function mode by calling the function + GPIO_Init(); + + (#) Declare a FMC_NANDInitTypeDef structure, for example: + FMC_NANDInitTypeDef FMC_NANDInitStructure; + and fill the FMC_NANDInitStructure variable with the allowed values of + the structure member. + + (#) Initialize the NAND Controller by calling the function + FMC_NANDInit(&FMC_NANDInitStructure); + + (#) Then enable the NAND Bank, for example: + FMC_NANDCmd(FMC_Bank3_NAND, ENABLE); + + (#) At this stage you can read/write from/to the memory connected to the NAND Bank. + + [..] + (@) To enable the Error Correction Code (ECC), you have to use the function + FMC_NANDECCCmd(FMC_Bank3_NAND, ENABLE); + [..] + (@) and to get the current ECC value you have to use the function + ECCval = FMC_GetECC(FMC_Bank3_NAND); + +@endverbatim + * @{ + */ + +/** + * @brief De-initializes the FMC NAND Banks registers to their default reset values. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @retval None + */ +void FMC_NANDDeInit(uint32_t FMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FMC_NAND_BANK(FMC_Bank)); + + if(FMC_Bank == FMC_Bank2_NAND) + { + /* Set the FMC_Bank2 registers to their reset values */ + FMC_Bank2->PCR2 = 0x00000018; + FMC_Bank2->SR2 = 0x00000040; + FMC_Bank2->PMEM2 = 0xFCFCFCFC; + FMC_Bank2->PATT2 = 0xFCFCFCFC; + } + /* FMC_Bank3_NAND */ + else + { + /* Set the FMC_Bank3 registers to their reset values */ + FMC_Bank3->PCR3 = 0x00000018; + FMC_Bank3->SR3 = 0x00000040; + FMC_Bank3->PMEM3 = 0xFCFCFCFC; + FMC_Bank3->PATT3 = 0xFCFCFCFC; + } +} + +/** + * @brief Initializes the FMC NAND Banks according to the specified parameters + * in the FMC_NANDInitStruct. + * @param FMC_NANDInitStruct : pointer to a FMC_NANDInitTypeDef structure that + * contains the configuration information for the FMC NAND specified Banks. + * @retval None + */ +void FMC_NANDInit(FMC_NANDInitTypeDef* FMC_NANDInitStruct) +{ + uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; + + /* Check the parameters */ + assert_param(IS_FMC_NAND_BANK(FMC_NANDInitStruct->FMC_Bank)); + assert_param(IS_FMC_WAIT_FEATURE(FMC_NANDInitStruct->FMC_Waitfeature)); + assert_param(IS_FMC_NAND_MEMORY_WIDTH(FMC_NANDInitStruct->FMC_MemoryDataWidth)); + assert_param(IS_FMC_ECC_STATE(FMC_NANDInitStruct->FMC_ECC)); + assert_param(IS_FMC_ECCPAGE_SIZE(FMC_NANDInitStruct->FMC_ECCPageSize)); + assert_param(IS_FMC_TCLR_TIME(FMC_NANDInitStruct->FMC_TCLRSetupTime)); + assert_param(IS_FMC_TAR_TIME(FMC_NANDInitStruct->FMC_TARSetupTime)); + assert_param(IS_FMC_SETUP_TIME(FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_SetupTime)); + assert_param(IS_FMC_WAIT_TIME(FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HiZSetupTime)); + assert_param(IS_FMC_SETUP_TIME(FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_SetupTime)); + assert_param(IS_FMC_WAIT_TIME(FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HiZSetupTime)); + + /* Set the tmppcr value according to FMC_NANDInitStruct parameters */ + tmppcr = (uint32_t)FMC_NANDInitStruct->FMC_Waitfeature | + PCR_MEMORYTYPE_NAND | + FMC_NANDInitStruct->FMC_MemoryDataWidth | + FMC_NANDInitStruct->FMC_ECC | + FMC_NANDInitStruct->FMC_ECCPageSize | + (FMC_NANDInitStruct->FMC_TCLRSetupTime << 9 )| + (FMC_NANDInitStruct->FMC_TARSetupTime << 13); + + /* Set tmppmem value according to FMC_CommonSpaceTimingStructure parameters */ + tmppmem = (uint32_t)FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_SetupTime | + (FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_WaitSetupTime << 8) | + (FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HoldSetupTime << 16)| + (FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HiZSetupTime << 24); + + /* Set tmppatt value according to FMC_AttributeSpaceTimingStructure parameters */ + tmppatt = (uint32_t)FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_SetupTime | + (FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_WaitSetupTime << 8) | + (FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HoldSetupTime << 16)| + (FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HiZSetupTime << 24); + + if(FMC_NANDInitStruct->FMC_Bank == FMC_Bank2_NAND) + { + /* FMC_Bank2_NAND registers configuration */ + FMC_Bank2->PCR2 = tmppcr; + FMC_Bank2->PMEM2 = tmppmem; + FMC_Bank2->PATT2 = tmppatt; + } + else + { + /* FMC_Bank3_NAND registers configuration */ + FMC_Bank3->PCR3 = tmppcr; + FMC_Bank3->PMEM3 = tmppmem; + FMC_Bank3->PATT3 = tmppatt; + } +} + + +/** + * @brief Fills each FMC_NANDInitStruct member with its default value. + * @param FMC_NANDInitStruct: pointer to a FMC_NANDInitTypeDef structure which + * will be initialized. + * @retval None + */ +void FMC_NANDStructInit(FMC_NANDInitTypeDef* FMC_NANDInitStruct) +{ + /* Reset NAND Init structure parameters values */ + FMC_NANDInitStruct->FMC_Bank = FMC_Bank2_NAND; + FMC_NANDInitStruct->FMC_Waitfeature = FMC_Waitfeature_Disable; + FMC_NANDInitStruct->FMC_MemoryDataWidth = FMC_NAND_MemoryDataWidth_16b; + FMC_NANDInitStruct->FMC_ECC = FMC_ECC_Disable; + FMC_NANDInitStruct->FMC_ECCPageSize = FMC_ECCPageSize_256Bytes; + FMC_NANDInitStruct->FMC_TCLRSetupTime = 0x0; + FMC_NANDInitStruct->FMC_TARSetupTime = 0x0; + FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_SetupTime = 252; + FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_WaitSetupTime = 252; + FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HoldSetupTime = 252; + FMC_NANDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HiZSetupTime = 252; + FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_SetupTime = 252; + FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_WaitSetupTime = 252; + FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HoldSetupTime = 252; + FMC_NANDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HiZSetupTime = 252; +} + +/** + * @brief Enables or disables the specified NAND Memory Bank. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @param NewState: new state of the FMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FMC_NANDCmd(uint32_t FMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FMC_NAND_BANK(FMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ + if(FMC_Bank == FMC_Bank2_NAND) + { + FMC_Bank2->PCR2 |= PCR_PBKEN_SET; + } + else + { + FMC_Bank3->PCR3 |= PCR_PBKEN_SET; + } + } + else + { + /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ + if(FMC_Bank == FMC_Bank2_NAND) + { + FMC_Bank2->PCR2 &= PCR_PBKEN_RESET; + } + else + { + FMC_Bank3->PCR3 &= PCR_PBKEN_RESET; + } + } +} +/** + * @brief Enables or disables the FMC NAND ECC feature. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @param NewState: new state of the FMC NAND ECC feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FMC_NANDECCCmd(uint32_t FMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FMC_NAND_BANK(FMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ + if(FMC_Bank == FMC_Bank2_NAND) + { + FMC_Bank2->PCR2 |= PCR_ECCEN_SET; + } + else + { + FMC_Bank3->PCR3 |= PCR_ECCEN_SET; + } + } + else + { + /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ + if(FMC_Bank == FMC_Bank2_NAND) + { + FMC_Bank2->PCR2 &= PCR_ECCEN_RESET; + } + else + { + FMC_Bank3->PCR3 &= PCR_ECCEN_RESET; + } + } +} + +/** + * @brief Returns the error correction code register value. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @retval The Error Correction Code (ECC) value. + */ +uint32_t FMC_GetECC(uint32_t FMC_Bank) +{ + uint32_t eccval = 0x00000000; + + if(FMC_Bank == FMC_Bank2_NAND) + { + /* Get the ECCR2 register value */ + eccval = FMC_Bank2->ECCR2; + } + else + { + /* Get the ECCR3 register value */ + eccval = FMC_Bank3->ECCR3; + } + /* Return the error correction code value */ + return(eccval); +} +/** + * @} + */ + +/** @defgroup FMC_Group3 PCCARD Controller functions + * @brief PCCARD Controller functions + * +@verbatim + =============================================================================== + ##### PCCARD Controller functions ##### + =============================================================================== + + [..] he following sequence should be followed to configure the FMC to interface + with 16-bit PC Card compatible memory connected to the PCCARD Bank: + + (#) Enable the clock for the FMC and associated GPIOs using the following functions: + (++) RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FMC, ENABLE); + (++) RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + + (#) FMC pins configuration + (++) Connect the involved FMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FMC); + (++) Configure these FMC pins in alternate function mode by calling the function + GPIO_Init(); + + (#) Declare a FMC_PCCARDInitTypeDef structure, for example: + FMC_PCCARDInitTypeDef FMC_PCCARDInitStructure; + and fill the FMC_PCCARDInitStructure variable with the allowed values of + the structure member. + + (#) Initialize the PCCARD Controller by calling the function + FMC_PCCARDInit(&FMC_PCCARDInitStructure); + + (#) Then enable the PCCARD Bank: + FMC_PCCARDCmd(ENABLE); + + (#) At this stage you can read/write from/to the memory connected to the PCCARD Bank. + +@endverbatim + * @{ + */ + +/** + * @brief De-initializes the FMC PCCARD Bank registers to their default reset values. + * @param None + * @retval None + */ +void FMC_PCCARDDeInit(void) +{ + /* Set the FMC_Bank4 registers to their reset values */ + FMC_Bank4->PCR4 = 0x00000018; + FMC_Bank4->SR4 = 0x00000000; + FMC_Bank4->PMEM4 = 0xFCFCFCFC; + FMC_Bank4->PATT4 = 0xFCFCFCFC; + FMC_Bank4->PIO4 = 0xFCFCFCFC; +} + +/** + * @brief Initializes the FMC PCCARD Bank according to the specified parameters + * in the FMC_PCCARDInitStruct. + * @param FMC_PCCARDInitStruct : pointer to a FMC_PCCARDInitTypeDef structure + * that contains the configuration information for the FMC PCCARD Bank. + * @retval None + */ +void FMC_PCCARDInit(FMC_PCCARDInitTypeDef* FMC_PCCARDInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FMC_WAIT_FEATURE(FMC_PCCARDInitStruct->FMC_Waitfeature)); + assert_param(IS_FMC_TCLR_TIME(FMC_PCCARDInitStruct->FMC_TCLRSetupTime)); + assert_param(IS_FMC_TAR_TIME(FMC_PCCARDInitStruct->FMC_TARSetupTime)); + + assert_param(IS_FMC_SETUP_TIME(FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_SetupTime)); + assert_param(IS_FMC_WAIT_TIME(FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HiZSetupTime)); + + assert_param(IS_FMC_SETUP_TIME(FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_SetupTime)); + assert_param(IS_FMC_WAIT_TIME(FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HiZSetupTime)); + assert_param(IS_FMC_SETUP_TIME(FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_SetupTime)); + assert_param(IS_FMC_WAIT_TIME(FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_HiZSetupTime)); + + /* Set the PCR4 register value according to FMC_PCCARDInitStruct parameters */ + FMC_Bank4->PCR4 = (uint32_t)FMC_PCCARDInitStruct->FMC_Waitfeature | + FMC_NAND_MemoryDataWidth_16b | + (FMC_PCCARDInitStruct->FMC_TCLRSetupTime << 9) | + (FMC_PCCARDInitStruct->FMC_TARSetupTime << 13); + + /* Set PMEM4 register value according to FMC_CommonSpaceTimingStructure parameters */ + FMC_Bank4->PMEM4 = (uint32_t)FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_SetupTime | + (FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_WaitSetupTime << 8) | + (FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HoldSetupTime << 16)| + (FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HiZSetupTime << 24); + + /* Set PATT4 register value according to FMC_AttributeSpaceTimingStructure parameters */ + FMC_Bank4->PATT4 = (uint32_t)FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_SetupTime | + (FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_WaitSetupTime << 8) | + (FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HoldSetupTime << 16)| + (FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HiZSetupTime << 24); + + /* Set PIO4 register value according to FMC_IOSpaceTimingStructure parameters */ + FMC_Bank4->PIO4 = (uint32_t)FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_SetupTime | + (FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_WaitSetupTime << 8) | + (FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_HoldSetupTime << 16)| + (FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_HiZSetupTime << 24); +} + +/** + * @brief Fills each FMC_PCCARDInitStruct member with its default value. + * @param FMC_PCCARDInitStruct: pointer to a FMC_PCCARDInitTypeDef structure + * which will be initialized. + * @retval None + */ +void FMC_PCCARDStructInit(FMC_PCCARDInitTypeDef* FMC_PCCARDInitStruct) +{ + /* Reset PCCARD Init structure parameters values */ + FMC_PCCARDInitStruct->FMC_Waitfeature = FMC_Waitfeature_Disable; + FMC_PCCARDInitStruct->FMC_TCLRSetupTime = 0; + FMC_PCCARDInitStruct->FMC_TARSetupTime = 0; + FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_SetupTime = 252; + FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_WaitSetupTime = 252; + FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HoldSetupTime = 252; + FMC_PCCARDInitStruct->FMC_CommonSpaceTimingStruct->FMC_HiZSetupTime = 252; + FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_SetupTime = 252; + FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_WaitSetupTime = 252; + FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HoldSetupTime = 252; + FMC_PCCARDInitStruct->FMC_AttributeSpaceTimingStruct->FMC_HiZSetupTime = 252; + FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_SetupTime = 252; + FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_WaitSetupTime = 252; + FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_HoldSetupTime = 252; + FMC_PCCARDInitStruct->FMC_IOSpaceTimingStruct->FMC_HiZSetupTime = 252; +} + +/** + * @brief Enables or disables the PCCARD Memory Bank. + * @param NewState: new state of the PCCARD Memory Bank. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FMC_PCCARDCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ + FMC_Bank4->PCR4 |= PCR_PBKEN_SET; + } + else + { + /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ + FMC_Bank4->PCR4 &= PCR_PBKEN_RESET; + } +} + +/** + * @} + */ + +/** @defgroup FMC_Group4 SDRAM Controller functions + * @brief SDRAM Controller functions + * +@verbatim + =============================================================================== + ##### SDRAM Controller functions ##### + =============================================================================== + + [..] The following sequence should be followed to configure the FMC to interface + with SDRAM memory connected to the SDRAM Bank 1 or SDRAM bank 2: + + (#) Enable the clock for the FMC and associated GPIOs using the following functions: + (++) RCC_AHB3PeriphClockCmd(RCC_AHB3Periph_FMC, ENABLE); + (++) RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE); + + (#) FMC pins configuration + (++) Connect the involved FMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FMC); + (++) Configure these FMC pins in alternate function mode by calling the function + GPIO_Init(); + + (#) Declare a FMC_SDRAMInitTypeDef structure, for example: + FMC_SDRAMInitTypeDef FMC_SDRAMInitStructure; + and fill the FMC_SDRAMInitStructure variable with the allowed values of + the structure member. + + (#) Initialize the SDRAM Controller by calling the function + FMC_SDRAMInit(&FMC_SDRAMInitStructure); + + (#) Declare a FMC_SDRAMCommandTypeDef structure, for example: + FMC_SDRAMCommandTypeDef FMC_SDRAMCommandStructure; + and fill the FMC_SDRAMCommandStructure variable with the allowed values of + the structure member. + + (#) Configure the SDCMR register with the desired command parameters by calling + the function FMC_SDRAMCmdConfig(&FMC_SDRAMCommandStructure); + + (#) At this stage, the SDRAM memory is ready for any valid command. + +@endverbatim + * @{ + */ + +/** + * @brief De-initializes the FMC SDRAM Banks registers to their default + * reset values. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank1_SDRAM: FMC Bank1 SDRAM + * @arg FMC_Bank2_SDRAM: FMC Bank2 SDRAM + * @retval None + */ +void FMC_SDRAMDeInit(uint32_t FMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FMC_SDRAM_BANK(FMC_Bank)); + + FMC_Bank5_6->SDCR[FMC_Bank] = 0x000002D0; + FMC_Bank5_6->SDTR[FMC_Bank] = 0x0FFFFFFF; + FMC_Bank5_6->SDCMR = 0x00000000; + FMC_Bank5_6->SDRTR = 0x00000000; + FMC_Bank5_6->SDSR = 0x00000000; +} + +/** + * @brief Initializes the FMC SDRAM Banks according to the specified + * parameters in the FMC_SDRAMInitStruct. + * @param FMC_SDRAMInitStruct : pointer to a FMC_SDRAMInitTypeDef structure + * that contains the configuration information for the FMC SDRAM + * specified Banks. + * @retval None + */ +void FMC_SDRAMInit(FMC_SDRAMInitTypeDef* FMC_SDRAMInitStruct) +{ + /* temporary registers */ + uint32_t tmpr1 = 0; + uint32_t tmpr2 = 0; + uint32_t tmpr3 = 0; + uint32_t tmpr4 = 0; + + /* Check the parameters */ + + /* Control parameters */ + assert_param(IS_FMC_SDRAM_BANK(FMC_SDRAMInitStruct->FMC_Bank)); + assert_param(IS_FMC_COLUMNBITS_NUMBER(FMC_SDRAMInitStruct->FMC_ColumnBitsNumber)); + assert_param(IS_FMC_ROWBITS_NUMBER(FMC_SDRAMInitStruct->FMC_RowBitsNumber)); + assert_param(IS_FMC_SDMEMORY_WIDTH(FMC_SDRAMInitStruct->FMC_SDMemoryDataWidth)); + assert_param(IS_FMC_INTERNALBANK_NUMBER(FMC_SDRAMInitStruct->FMC_InternalBankNumber)); + assert_param(IS_FMC_CAS_LATENCY(FMC_SDRAMInitStruct->FMC_CASLatency)); + assert_param(IS_FMC_WRITE_PROTECTION(FMC_SDRAMInitStruct->FMC_WriteProtection)); + assert_param(IS_FMC_SDCLOCK_PERIOD(FMC_SDRAMInitStruct->FMC_SDClockPeriod)); + assert_param(IS_FMC_READ_BURST(FMC_SDRAMInitStruct->FMC_ReadBurst)); + assert_param(IS_FMC_READPIPE_DELAY(FMC_SDRAMInitStruct->FMC_ReadPipeDelay)); + + /* Timing parameters */ + assert_param(IS_FMC_LOADTOACTIVE_DELAY(FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_LoadToActiveDelay)); + assert_param(IS_FMC_EXITSELFREFRESH_DELAY(FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_ExitSelfRefreshDelay)); + assert_param(IS_FMC_SELFREFRESH_TIME(FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_SelfRefreshTime)); + assert_param(IS_FMC_ROWCYCLE_DELAY(FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RowCycleDelay)); + assert_param(IS_FMC_WRITE_RECOVERY_TIME(FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_WriteRecoveryTime)); + assert_param(IS_FMC_RP_DELAY(FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RPDelay)); + assert_param(IS_FMC_RCD_DELAY(FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RCDDelay)); + + /* SDRAM bank control register configuration */ + tmpr1 = (uint32_t)FMC_SDRAMInitStruct->FMC_ColumnBitsNumber | + FMC_SDRAMInitStruct->FMC_RowBitsNumber | + FMC_SDRAMInitStruct->FMC_SDMemoryDataWidth | + FMC_SDRAMInitStruct->FMC_InternalBankNumber | + FMC_SDRAMInitStruct->FMC_CASLatency | + FMC_SDRAMInitStruct->FMC_WriteProtection | + FMC_SDRAMInitStruct->FMC_SDClockPeriod | + FMC_SDRAMInitStruct->FMC_ReadBurst | + FMC_SDRAMInitStruct->FMC_ReadPipeDelay; + + if(FMC_SDRAMInitStruct->FMC_Bank == FMC_Bank1_SDRAM ) + { + FMC_Bank5_6->SDCR[FMC_SDRAMInitStruct->FMC_Bank] = tmpr1; + } + else /* SDCR2 "don't care" bits configuration */ + { + tmpr3 = (uint32_t)FMC_SDRAMInitStruct->FMC_SDClockPeriod | + FMC_SDRAMInitStruct->FMC_ReadBurst | + FMC_SDRAMInitStruct->FMC_ReadPipeDelay; + + FMC_Bank5_6->SDCR[FMC_Bank1_SDRAM] = tmpr3; + FMC_Bank5_6->SDCR[FMC_SDRAMInitStruct->FMC_Bank] = tmpr1; + } + /* SDRAM bank timing register configuration */ + if(FMC_SDRAMInitStruct->FMC_Bank == FMC_Bank1_SDRAM ) + { + tmpr2 = (uint32_t)((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_LoadToActiveDelay)-1) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_ExitSelfRefreshDelay)-1) << 4) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_SelfRefreshTime)-1) << 8) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RowCycleDelay)-1) << 12) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_WriteRecoveryTime)-1) << 16) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RPDelay)-1) << 20) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RCDDelay)-1) << 24); + + FMC_Bank5_6->SDTR[FMC_SDRAMInitStruct->FMC_Bank] = tmpr2; + } + else /* SDTR "don't care bits configuration */ + { + tmpr2 = (uint32_t)((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_LoadToActiveDelay)-1) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_ExitSelfRefreshDelay)-1) << 4) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_SelfRefreshTime)-1) << 8) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_WriteRecoveryTime)-1) << 16); + + tmpr4 = (uint32_t)(((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RowCycleDelay)-1) << 12) | + (((FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RPDelay)-1) << 20); + + FMC_Bank5_6->SDTR[FMC_Bank1_SDRAM] = tmpr4; + FMC_Bank5_6->SDTR[FMC_SDRAMInitStruct->FMC_Bank] = tmpr2; + } + +} + +/** + * @brief Fills each FMC_SDRAMInitStruct member with its default value. + * @param FMC_SDRAMInitStruct: pointer to a FMC_SDRAMInitTypeDef structure + * which will be initialized. + * @retval None + */ +void FMC_SDRAMStructInit(FMC_SDRAMInitTypeDef* FMC_SDRAMInitStruct) +{ + /* Reset SDRAM Init structure parameters values */ + FMC_SDRAMInitStruct->FMC_Bank = FMC_Bank1_SDRAM; + FMC_SDRAMInitStruct->FMC_ColumnBitsNumber = FMC_ColumnBits_Number_8b; + FMC_SDRAMInitStruct->FMC_RowBitsNumber = FMC_RowBits_Number_11b; + FMC_SDRAMInitStruct->FMC_SDMemoryDataWidth = FMC_SDMemory_Width_16b; + FMC_SDRAMInitStruct->FMC_InternalBankNumber = FMC_InternalBank_Number_4; + FMC_SDRAMInitStruct->FMC_CASLatency = FMC_CAS_Latency_1; + FMC_SDRAMInitStruct->FMC_WriteProtection = FMC_Write_Protection_Enable; + FMC_SDRAMInitStruct->FMC_SDClockPeriod = FMC_SDClock_Disable; + FMC_SDRAMInitStruct->FMC_ReadBurst = FMC_Read_Burst_Disable; + FMC_SDRAMInitStruct->FMC_ReadPipeDelay = FMC_ReadPipe_Delay_0; + + FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_LoadToActiveDelay = 16; + FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_ExitSelfRefreshDelay = 16; + FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_SelfRefreshTime = 16; + FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RowCycleDelay = 16; + FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_WriteRecoveryTime = 16; + FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RPDelay = 16; + FMC_SDRAMInitStruct->FMC_SDRAMTimingStruct->FMC_RCDDelay = 16; + +} + +/** + * @brief Configures the SDRAM memory command issued when the device is accessed. + * @param FMC_SDRAMCommandStruct: pointer to a FMC_SDRAMCommandTypeDef structure + * which will be configured. + * @retval None + */ +void FMC_SDRAMCmdConfig(FMC_SDRAMCommandTypeDef* FMC_SDRAMCommandStruct) +{ + uint32_t tmpr = 0x0; + + /* check parameters */ + assert_param(IS_FMC_COMMAND_MODE(FMC_SDRAMCommandStruct->FMC_CommandMode)); + assert_param(IS_FMC_COMMAND_TARGET(FMC_SDRAMCommandStruct->FMC_CommandTarget)); + assert_param(IS_FMC_AUTOREFRESH_NUMBER(FMC_SDRAMCommandStruct->FMC_AutoRefreshNumber)); + assert_param(IS_FMC_MODE_REGISTER(FMC_SDRAMCommandStruct->FMC_ModeRegisterDefinition)); + + tmpr = (uint32_t)(FMC_SDRAMCommandStruct->FMC_CommandMode | + FMC_SDRAMCommandStruct->FMC_CommandTarget | + (((FMC_SDRAMCommandStruct->FMC_AutoRefreshNumber)-1)<<5) | + ((FMC_SDRAMCommandStruct->FMC_ModeRegisterDefinition)<<9)); + + FMC_Bank5_6->SDCMR = tmpr; + +} + + +/** + * @brief Returns the indicated FMC SDRAM bank mode status. + * @param SDRAM_Bank: Defines the FMC SDRAM bank. This parameter can be + * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM. + * @retval The FMC SDRAM bank mode status + */ +uint32_t FMC_GetModeStatus(uint32_t SDRAM_Bank) +{ + uint32_t tmpreg = 0; + + /* Check the parameter */ + assert_param(IS_FMC_SDRAM_BANK(SDRAM_Bank)); + + /* Get the busy flag status */ + if(SDRAM_Bank == FMC_Bank1_SDRAM) + { + tmpreg = (uint32_t)(FMC_Bank5_6->SDSR & FMC_SDSR_MODES1); + } + else + { + tmpreg = ((uint32_t)(FMC_Bank5_6->SDSR & FMC_SDSR_MODES2) >> 2); + } + + /* Return the mode status */ + return tmpreg; +} + +/** + * @brief defines the SDRAM Memory Refresh rate. + * @param FMC_Count: specifies the Refresh timer count. + * @retval None + */ +void FMC_SetRefreshCount(uint32_t FMC_Count) +{ + /* check the parameters */ + assert_param(IS_FMC_REFRESH_COUNT(FMC_Count)); + + FMC_Bank5_6->SDRTR |= (FMC_Count<<1); + +} + +/** + * @brief Sets the Number of consecutive SDRAM Memory auto Refresh commands. + * @param FMC_Number: specifies the auto Refresh number. + * @retval None + */ +void FMC_SetAutoRefresh_Number(uint32_t FMC_Number) +{ + /* check the parameters */ + assert_param(IS_FMC_AUTOREFRESH_NUMBER(FMC_Number)); + + FMC_Bank5_6->SDCMR |= (FMC_Number << 5); +} + +/** + * @brief Enables or disables write protection to the specified FMC SDRAM Bank. + * @param SDRAM_Bank: Defines the FMC SDRAM bank. This parameter can be + * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM. + * @param NewState: new state of the write protection flag. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FMC_SDRAMWriteProtectionConfig(uint32_t SDRAM_Bank, FunctionalState NewState) +{ + /* Check the parameter */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_FMC_SDRAM_BANK(SDRAM_Bank)); + + if (NewState != DISABLE) + { + FMC_Bank5_6->SDCR[SDRAM_Bank] |= FMC_Write_Protection_Enable; + } + else + { + FMC_Bank5_6->SDCR[SDRAM_Bank] &= SDCR_WriteProtection_RESET; + } + +} + +/** + * @} + */ + +/** @defgroup FMC_Group5 Interrupts and flags management functions + * @brief Interrupts and flags management functions + * +@verbatim + =============================================================================== + ##### Interrupts and flags management functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Enables or disables the specified FMC interrupts. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @arg FMC_Bank4_PCCARD: FMC Bank4 PCCARD + * @arg FMC_Bank1_SDRAM: FMC Bank1 SDRAM + * @arg FMC_Bank2_SDRAM: FMC Bank2 SDRAM + * @param FMC_IT: specifies the FMC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FMC_IT_Level: Level edge detection interrupt. + * @arg FMC_IT_FallingEdge: Falling edge detection interrupt. + * @arg FMC_IT_Refresh: Refresh error detection interrupt. + * @param NewState: new state of the specified FMC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FMC_ITConfig(uint32_t FMC_Bank, uint32_t FMC_IT, FunctionalState NewState) +{ + assert_param(IS_FMC_IT_BANK(FMC_Bank)); + assert_param(IS_FMC_IT(FMC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected FMC_Bank2 interrupts */ + if(FMC_Bank == FMC_Bank2_NAND) + { + FMC_Bank2->SR2 |= FMC_IT; + } + /* Enable the selected FMC_Bank3 interrupts */ + else if (FMC_Bank == FMC_Bank3_NAND) + { + FMC_Bank3->SR3 |= FMC_IT; + } + /* Enable the selected FMC_Bank4 interrupts */ + else if (FMC_Bank == FMC_Bank4_PCCARD) + { + FMC_Bank4->SR4 |= FMC_IT; + } + /* Enable the selected FMC_Bank5_6 interrupt */ + else + { + /* Enables the interrupt if the refresh error flag is set */ + FMC_Bank5_6->SDRTR |= FMC_IT; + } + } + else + { + /* Disable the selected FMC_Bank2 interrupts */ + if(FMC_Bank == FMC_Bank2_NAND) + { + + FMC_Bank2->SR2 &= (uint32_t)~FMC_IT; + } + /* Disable the selected FMC_Bank3 interrupts */ + else if (FMC_Bank == FMC_Bank3_NAND) + { + FMC_Bank3->SR3 &= (uint32_t)~FMC_IT; + } + /* Disable the selected FMC_Bank4 interrupts */ + else if(FMC_Bank == FMC_Bank4_PCCARD) + { + FMC_Bank4->SR4 &= (uint32_t)~FMC_IT; + } + /* Disable the selected FMC_Bank5_6 interrupt */ + else + { + /* Disables the interrupt if the refresh error flag is not set */ + FMC_Bank5_6->SDRTR &= (uint32_t)~FMC_IT; + } + } +} + +/** + * @brief Checks whether the specified FMC flag is set or not. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @arg FMC_Bank4_PCCARD: FMC Bank4 PCCARD + * @arg FMC_Bank1_SDRAM: FMC Bank1 SDRAM + * @arg FMC_Bank2_SDRAM: FMC Bank2 SDRAM + * @arg FMC_Bank1_SDRAM | FMC_Bank2_SDRAM: FMC Bank1 or Bank2 SDRAM + * @param FMC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg FMC_FLAG_RisingEdge: Rising edge detection Flag. + * @arg FMC_FLAG_Level: Level detection Flag. + * @arg FMC_FLAG_FallingEdge: Falling edge detection Flag. + * @arg FMC_FLAG_FEMPT: Fifo empty Flag. + * @arg FMC_FLAG_Refresh: Refresh error Flag. + * @arg FMC_FLAG_Busy: Busy status Flag. + * @retval The new state of FMC_FLAG (SET or RESET). + */ +FlagStatus FMC_GetFlagStatus(uint32_t FMC_Bank, uint32_t FMC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpsr = 0x00000000; + + /* Check the parameters */ + assert_param(IS_FMC_GETFLAG_BANK(FMC_Bank)); + assert_param(IS_FMC_GET_FLAG(FMC_FLAG)); + + if(FMC_Bank == FMC_Bank2_NAND) + { + tmpsr = FMC_Bank2->SR2; + } + else if(FMC_Bank == FMC_Bank3_NAND) + { + tmpsr = FMC_Bank3->SR3; + } + else if(FMC_Bank == FMC_Bank4_PCCARD) + { + tmpsr = FMC_Bank4->SR4; + } + else + { + tmpsr = FMC_Bank5_6->SDSR; + } + + /* Get the flag status */ + if ((tmpsr & FMC_FLAG) != FMC_FLAG ) + { + bitstatus = RESET; + } + else + { + bitstatus = SET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the FMC's pending flags. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @arg FMC_Bank4_PCCARD: FMC Bank4 PCCARD + * @arg FMC_Bank1_SDRAM: FMC Bank1 SDRAM + * @arg FMC_Bank2_SDRAM: FMC Bank2 SDRAM + * @param FMC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg FMC_FLAG_RisingEdge: Rising edge detection Flag. + * @arg FMC_FLAG_Level: Level detection Flag. + * @arg FMC_FLAG_FallingEdge: Falling edge detection Flag. + * @arg FMC_FLAG_Refresh: Refresh error Flag. + * @retval None + */ +void FMC_ClearFlag(uint32_t FMC_Bank, uint32_t FMC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_FMC_GETFLAG_BANK(FMC_Bank)); + assert_param(IS_FMC_CLEAR_FLAG(FMC_FLAG)) ; + + if(FMC_Bank == FMC_Bank2_NAND) + { + FMC_Bank2->SR2 &= (~FMC_FLAG); + } + else if(FMC_Bank == FMC_Bank3_NAND) + { + FMC_Bank3->SR3 &= (~FMC_FLAG); + } + else if(FMC_Bank == FMC_Bank4_PCCARD) + { + FMC_Bank4->SR4 &= (~FMC_FLAG); + } + /* FMC_Bank5_6 SDRAM*/ + else + { + FMC_Bank5_6->SDRTR &= (~FMC_FLAG); + } + +} + +/** + * @brief Checks whether the specified FMC interrupt has occurred or not. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @arg FMC_Bank4_PCCARD: FMC Bank4 PCCARD + * @arg FMC_Bank1_SDRAM: FMC Bank1 SDRAM + * @arg FMC_Bank2_SDRAM: FMC Bank2 SDRAM + * @param FMC_IT: specifies the FMC interrupt source to check. + * This parameter can be one of the following values: + * @arg FMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FMC_IT_Level: Level edge detection interrupt. + * @arg FMC_IT_FallingEdge: Falling edge detection interrupt. + * @arg FMC_IT_Refresh: Refresh error detection interrupt. + * @retval The new state of FMC_IT (SET or RESET). + */ +ITStatus FMC_GetITStatus(uint32_t FMC_Bank, uint32_t FMC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpsr = 0x0; + uint32_t tmpsr2 = 0x0; + uint32_t itstatus = 0x0; + uint32_t itenable = 0x0; + + /* Check the parameters */ + assert_param(IS_FMC_IT_BANK(FMC_Bank)); + assert_param(IS_FMC_GET_IT(FMC_IT)); + + if(FMC_Bank == FMC_Bank2_NAND) + { + tmpsr = FMC_Bank2->SR2; + } + else if(FMC_Bank == FMC_Bank3_NAND) + { + tmpsr = FMC_Bank3->SR3; + } + else if(FMC_Bank == FMC_Bank4_PCCARD) + { + tmpsr = FMC_Bank4->SR4; + } + /* FMC_Bank5_6 SDRAM*/ + else + { + tmpsr = FMC_Bank5_6->SDRTR; + tmpsr2 = FMC_Bank5_6->SDSR; + } + + /* get the IT enable bit status*/ + itenable = tmpsr & FMC_IT; + + /* get the corresponding IT Flag status*/ + if((FMC_Bank == FMC_Bank1_SDRAM) || (FMC_Bank == FMC_Bank2_SDRAM)) + { + itstatus = tmpsr2 & FMC_SDSR_RE; + } + else + { + itstatus = tmpsr & (FMC_IT >> 3); + } + + if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the FMC's interrupt pending bits. + * @param FMC_Bank: specifies the FMC Bank to be used + * This parameter can be one of the following values: + * @arg FMC_Bank2_NAND: FMC Bank2 NAND + * @arg FMC_Bank3_NAND: FMC Bank3 NAND + * @arg FMC_Bank4_PCCARD: FMC Bank4 PCCARD + * @arg FMC_Bank1_SDRAM: FMC Bank1 SDRAM + * @arg FMC_Bank2_SDRAM: FMC Bank2 SDRAM + * @param FMC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg FMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FMC_IT_Level: Level edge detection interrupt. + * @arg FMC_IT_FallingEdge: Falling edge detection interrupt. + * @arg FMC_IT_Refresh: Refresh error detection interrupt. + * @retval None + */ +void FMC_ClearITPendingBit(uint32_t FMC_Bank, uint32_t FMC_IT) +{ + /* Check the parameters */ + assert_param(IS_FMC_IT_BANK(FMC_Bank)); + assert_param(IS_FMC_IT(FMC_IT)); + + if(FMC_Bank == FMC_Bank2_NAND) + { + FMC_Bank2->SR2 &= ~(FMC_IT >> 3); + } + else if(FMC_Bank == FMC_Bank3_NAND) + { + FMC_Bank3->SR3 &= ~(FMC_IT >> 3); + } + else if(FMC_Bank == FMC_Bank4_PCCARD) + { + FMC_Bank4->SR4 &= ~(FMC_IT >> 3); + } + /* FMC_Bank5_6 SDRAM*/ + else + { + FMC_Bank5_6->SDRTR |= FMC_SDRTR_CRE; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h b/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h new file mode 100644 index 00000000..3764c794 --- /dev/null +++ b/boards/base/STM32F429i-Discovery/stm32f4xx_fmc.h @@ -0,0 +1,1140 @@ +/** + ****************************************************************************** + * @file stm32f4xx_fmc.h + * @author MCD Application Team + * @version V1.2.1 + * @date 19-September-2013 + * @brief This file contains all the functions prototypes for the FMC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_FMC_H +#define __STM32F4xx_FMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +//FIXME this should not be needed +#define STM32F429_439xx + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FMC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief Timing parameters For NOR/SRAM Banks + */ +typedef struct +{ + uint32_t FMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between 0 and 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t FMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between 1 and 15. + @note This parameter is not used with synchronous NOR Flash memories.*/ + + uint32_t FMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between 1 and 255. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ + + uint32_t FMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between 0 and 15. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t FMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. + This parameter can be a value between 1 and 15. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ + + uint32_t FMC_DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between 0 and 15 in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t FMC_AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FMC_Access_Mode */ +}FMC_NORSRAMTimingInitTypeDef; + +/** + * @brief FMC NOR/SRAM Init structure definition + */ +typedef struct +{ + uint32_t FMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. + This parameter can be a value of @ref FMC_NORSRAM_Bank */ + + uint32_t FMC_DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the databus or not. + This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */ + + uint32_t FMC_MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory bank. + This parameter can be a value of @ref FMC_Memory_Type */ + + uint32_t FMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FMC_NORSRAM_Data_Width */ + + uint32_t FMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FMC_Burst_Access_Mode */ + + uint32_t FMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal_Polarity */ + + uint32_t FMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FMC_Wrap_Mode */ + + uint32_t FMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FMC_Wait_Timing */ + + uint32_t FMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FMC. + This parameter can be a value of @ref FMC_Write_Operation */ + + uint32_t FMC_WaitSignal; /*!< Enables or disables the wait state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal */ + + uint32_t FMC_ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FMC_Extended_Mode */ + + uint32_t FMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FMC_AsynchronousWait */ + + uint32_t FMC_WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FMC_Write_Burst */ + + uint32_t FMC_ContinousClock; /*!< Enables or disables the FMC clock output to external memory devices. + This parameter is only enabled through the FMC_BCR1 register, and don't care + through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Continous_Clock */ + + + FMC_NORSRAMTimingInitTypeDef* FMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the Extended Mode is not used*/ + + FMC_NORSRAMTimingInitTypeDef* FMC_WriteTimingStruct; /*!< Timing Parameters for write access if the Extended Mode is used*/ +}FMC_NORSRAMInitTypeDef; + +/** + * @brief Timing parameters For FMC NAND and PCCARD Banks + */ +typedef struct +{ + uint32_t FMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between 0 and 255.*/ + + uint32_t FMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between 0 and 255 */ + + uint32_t FMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command de-assertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between 0 and 255 */ + + uint32_t FMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + databus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between 0 and 255 */ +}FMC_NAND_PCCARDTimingInitTypeDef; + +/** + * @brief FMC NAND Init structure definition + */ +typedef struct +{ + uint32_t FMC_Bank; /*!< Specifies the NAND memory bank that will be used. + This parameter can be a value of @ref FMC_NAND_Bank */ + + uint32_t FMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. + This parameter can be any value of @ref FMC_Wait_feature */ + + uint32_t FMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FMC_NAND_Data_Width */ + + uint32_t FMC_ECC; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FMC_ECC */ + + uint32_t FMC_ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FMC_ECC_Page_Size */ + + uint32_t FMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 255. */ + + uint32_t FMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0 and 255 */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_CommonSpaceTimingStruct; /*!< FMC Common Space Timing */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_AttributeSpaceTimingStruct; /*!< FMC Attribute Space Timing */ +}FMC_NANDInitTypeDef; + +/** + * @brief FMC PCCARD Init structure definition + */ + +typedef struct +{ + uint32_t FMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. + This parameter can be any value of @ref FMC_Wait_feature */ + + uint32_t FMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 255. */ + + uint32_t FMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0 and 255 */ + + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_CommonSpaceTimingStruct; /*!< FMC Common Space Timing */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_AttributeSpaceTimingStruct; /*!< FMC Attribute Space Timing */ + + FMC_NAND_PCCARDTimingInitTypeDef* FMC_IOSpaceTimingStruct; /*!< FMC IO Space Timing */ +}FMC_PCCARDInitTypeDef; + +/** + * @brief Timing parameters for FMC SDRAM Banks + */ + +typedef struct +{ + uint32_t FMC_LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and + an active or Refresh command in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to + issuing the Activate command in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock + cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command + and the delay between two consecutive Refresh commands in number of + memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_RPDelay; /*!< Defines the delay between a Precharge Command and an other command + in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write command + in number of memory clock cycles. + This parameter can be a value between 1 and 16. */ + +}FMC_SDRAMTimingInitTypeDef; + +/** + * @brief Command parameters for FMC SDRAM Banks + */ + + +typedef struct +{ + uint32_t FMC_CommandMode; /*!< Defines the command issued to the SDRAM device. + This parameter can be a value of @ref FMC_Command_Mode. */ + + uint32_t FMC_CommandTarget; /*!< Defines which bank (1 or 2) the command will be issued to. + This parameter can be a value of @ref FMC_Command_Target. */ + + uint32_t FMC_AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued + in auto refresh mode. + This parameter can be a value between 1 and 16. */ + + uint32_t FMC_ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */ + +}FMC_SDRAMCommandTypeDef; + +/** + * @brief FMC SDRAM Init structure definition + */ + +typedef struct +{ + uint32_t FMC_Bank; /*!< Specifies the SDRAM memory bank that will be used. + This parameter can be a value of @ref FMC_SDRAM_Bank */ + + uint32_t FMC_ColumnBitsNumber; /*!< Defines the number of bits of column address. + This parameter can be a value of @ref FMC_ColumnBits_Number. */ + + uint32_t FMC_RowBitsNumber; /*!< Defines the number of bits of column address.. + This parameter can be a value of @ref FMC_RowBits_Number. */ + + uint32_t FMC_SDMemoryDataWidth; /*!< Defines the memory device width. + This parameter can be a value of @ref FMC_SDMemory_Data_Width. */ + + uint32_t FMC_InternalBankNumber; /*!< Defines the number of bits of column address. + This parameter can be of @ref FMC_InternalBank_Number. */ + + uint32_t FMC_CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles. + This parameter can be a value of @ref FMC_CAS_Latency. */ + + uint32_t FMC_WriteProtection; /*!< Enables the SDRAM bank to be accessed in write mode. + This parameter can be a value of @ref FMC_Write_Protection. */ + + uint32_t FMC_SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM Banks and they allow to disable + the clock before changing frequency. + This parameter can be a value of @ref FMC_SDClock_Period. */ + + uint32_t FMC_ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read commands + during the CAS latency and stores data in the Read FIFO. + This parameter can be a value of @ref FMC_Read_Burst. */ + + uint32_t FMC_ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path. + This parameter can be a value of @ref FMC_ReadPipe_Delay. */ + + FMC_SDRAMTimingInitTypeDef* FMC_SDRAMTimingStruct; /*!< Timing Parameters for write and read access*/ + +}FMC_SDRAMInitTypeDef; + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FMC_Exported_Constants + * @{ + */ + +/** @defgroup FMC_NORSRAM_Bank + * @{ + */ +#define FMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) +#define FMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) +#define FMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) +#define FMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) + +#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_Bank1_NORSRAM1) || \ + ((BANK) == FMC_Bank1_NORSRAM2) || \ + ((BANK) == FMC_Bank1_NORSRAM3) || \ + ((BANK) == FMC_Bank1_NORSRAM4)) +/** + * @} + */ + +/** @defgroup FMC_NAND_Bank + * @{ + */ +#define FMC_Bank2_NAND ((uint32_t)0x00000010) +#define FMC_Bank3_NAND ((uint32_t)0x00000100) + +#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_Bank2_NAND) || \ + ((BANK) == FMC_Bank3_NAND)) +/** + * @} + */ + +/** @defgroup FMC_PCCARD_Bank + * @{ + */ +#define FMC_Bank4_PCCARD ((uint32_t)0x00001000) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Bank + * @{ + */ +#define FMC_Bank1_SDRAM ((uint32_t)0x00000000) +#define FMC_Bank2_SDRAM ((uint32_t)0x00000001) + +#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_Bank1_SDRAM) || \ + ((BANK) == FMC_Bank2_SDRAM)) + +/** + * @} + */ + + +/** @defgroup FMC_NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FMC_Data_Address_Bus_Multiplexing + * @{ + */ + +#define FMC_DataAddressMux_Disable ((uint32_t)0x00000000) +#define FMC_DataAddressMux_Enable ((uint32_t)0x00000002) + +#define IS_FMC_MUX(MUX) (((MUX) == FMC_DataAddressMux_Disable) || \ + ((MUX) == FMC_DataAddressMux_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Memory_Type + * @{ + */ + +#define FMC_MemoryType_SRAM ((uint32_t)0x00000000) +#define FMC_MemoryType_PSRAM ((uint32_t)0x00000004) +#define FMC_MemoryType_NOR ((uint32_t)0x00000008) + +#define IS_FMC_MEMORY(MEMORY) (((MEMORY) == FMC_MemoryType_SRAM) || \ + ((MEMORY) == FMC_MemoryType_PSRAM)|| \ + ((MEMORY) == FMC_MemoryType_NOR)) +/** + * @} + */ + +/** @defgroup FMC_NORSRAM_Data_Width + * @{ + */ + +#define FMC_NORSRAM_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FMC_NORSRAM_MemoryDataWidth_16b ((uint32_t)0x00000010) +#define FMC_NORSRAM_MemoryDataWidth_32b ((uint32_t)0x00000020) + +#define IS_FMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NORSRAM_MemoryDataWidth_8b) || \ + ((WIDTH) == FMC_NORSRAM_MemoryDataWidth_16b) || \ + ((WIDTH) == FMC_NORSRAM_MemoryDataWidth_32b)) +/** + * @} + */ + +/** @defgroup FMC_Burst_Access_Mode + * @{ + */ + +#define FMC_BurstAccessMode_Disable ((uint32_t)0x00000000) +#define FMC_BurstAccessMode_Enable ((uint32_t)0x00000100) + +#define IS_FMC_BURSTMODE(STATE) (((STATE) == FMC_BurstAccessMode_Disable) || \ + ((STATE) == FMC_BurstAccessMode_Enable)) +/** + * @} + */ + +/** @defgroup FMC_AsynchronousWait + * @{ + */ +#define FMC_AsynchronousWait_Disable ((uint32_t)0x00000000) +#define FMC_AsynchronousWait_Enable ((uint32_t)0x00008000) + +#define IS_FMC_ASYNWAIT(STATE) (((STATE) == FMC_AsynchronousWait_Disable) || \ + ((STATE) == FMC_AsynchronousWait_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal_Polarity + * @{ + */ +#define FMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) +#define FMC_WaitSignalPolarity_High ((uint32_t)0x00000200) + +#define IS_FMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FMC_WaitSignalPolarity_Low) || \ + ((POLARITY) == FMC_WaitSignalPolarity_High)) +/** + * @} + */ + +/** @defgroup FMC_Wrap_Mode + * @{ + */ +#define FMC_WrapMode_Disable ((uint32_t)0x00000000) +#define FMC_WrapMode_Enable ((uint32_t)0x00000400) + +#define IS_FMC_WRAP_MODE(MODE) (((MODE) == FMC_WrapMode_Disable) || \ + ((MODE) == FMC_WrapMode_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Wait_Timing + * @{ + */ +#define FMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) +#define FMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) + +#define IS_FMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FMC_WaitSignalActive_BeforeWaitState) || \ + ((ACTIVE) == FMC_WaitSignalActive_DuringWaitState)) +/** + * @} + */ + +/** @defgroup FMC_Write_Operation + * @{ + */ +#define FMC_WriteOperation_Disable ((uint32_t)0x00000000) +#define FMC_WriteOperation_Enable ((uint32_t)0x00001000) + +#define IS_FMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FMC_WriteOperation_Disable) || \ + ((OPERATION) == FMC_WriteOperation_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal + * @{ + */ +#define FMC_WaitSignal_Disable ((uint32_t)0x00000000) +#define FMC_WaitSignal_Enable ((uint32_t)0x00002000) + +#define IS_FMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FMC_WaitSignal_Disable) || \ + ((SIGNAL) == FMC_WaitSignal_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Extended_Mode + * @{ + */ +#define FMC_ExtendedMode_Disable ((uint32_t)0x00000000) +#define FMC_ExtendedMode_Enable ((uint32_t)0x00004000) + +#define IS_FMC_EXTENDED_MODE(MODE) (((MODE) == FMC_ExtendedMode_Disable) || \ + ((MODE) == FMC_ExtendedMode_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Write_Burst + * @{ + */ + +#define FMC_WriteBurst_Disable ((uint32_t)0x00000000) +#define FMC_WriteBurst_Enable ((uint32_t)0x00080000) + +#define IS_FMC_WRITE_BURST(BURST) (((BURST) == FMC_WriteBurst_Disable) || \ + ((BURST) == FMC_WriteBurst_Enable)) +/** + * @} + */ + +/** @defgroup FMC_Continous_Clock + * @{ + */ + +#define FMC_CClock_SyncOnly ((uint32_t)0x00000000) +#define FMC_CClock_SyncAsync ((uint32_t)0x00100000) + +#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CClock_SyncOnly) || \ + ((CCLOCK) == FMC_CClock_SyncAsync)) +/** + * @} + */ + +/** @defgroup FMC_Address_Setup_Time + * @{ + */ +#define IS_FMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15) +/** + * @} + */ + +/** @defgroup FMC_Address_Hold_Time + * @{ + */ +#define IS_FMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15)) +/** + * @} + */ + +/** @defgroup FMC_Data_Setup_Time + * @{ + */ +#define IS_FMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255)) +/** + * @} + */ + +/** @defgroup FMC_Bus_Turn_around_Duration + * @{ + */ +#define IS_FMC_TURNAROUND_TIME(TIME) ((TIME) <= 15) +/** + * @} + */ + +/** @defgroup FMC_CLK_Division + * @{ + */ +#define IS_FMC_CLK_DIV(DIV) (((DIV) > 0) && ((DIV) <= 15)) +/** + * @} + */ + +/** @defgroup FMC_Data_Latency + * @{ + */ +#define IS_FMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 15) +/** + * @} + */ + +/** @defgroup FMC_Access_Mode + * @{ + */ +#define FMC_AccessMode_A ((uint32_t)0x00000000) +#define FMC_AccessMode_B ((uint32_t)0x10000000) +#define FMC_AccessMode_C ((uint32_t)0x20000000) +#define FMC_AccessMode_D ((uint32_t)0x30000000) + +#define IS_FMC_ACCESS_MODE(MODE) (((MODE) == FMC_AccessMode_A) || \ + ((MODE) == FMC_AccessMode_B) || \ + ((MODE) == FMC_AccessMode_C) || \ + ((MODE) == FMC_AccessMode_D)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FMC_NAND_PCCARD_Controller + * @{ + */ + +/** @defgroup FMC_Wait_feature + * @{ + */ +#define FMC_Waitfeature_Disable ((uint32_t)0x00000000) +#define FMC_Waitfeature_Enable ((uint32_t)0x00000002) + +#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_Waitfeature_Disable) || \ + ((FEATURE) == FMC_Waitfeature_Enable)) +/** + * @} + */ + +/** @defgroup FMC_NAND_Data_Width + * @{ + */ +#define FMC_NAND_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FMC_NAND_MemoryDataWidth_16b ((uint32_t)0x00000010) + +#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_MemoryDataWidth_8b) || \ + ((WIDTH) == FMC_NAND_MemoryDataWidth_16b)) +/** + * @} + */ + +/** @defgroup FMC_ECC + * @{ + */ +#define FMC_ECC_Disable ((uint32_t)0x00000000) +#define FMC_ECC_Enable ((uint32_t)0x00000040) + +#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_ECC_Disable) || \ + ((STATE) == FMC_ECC_Enable)) +/** + * @} + */ + +/** @defgroup FMC_ECC_Page_Size + * @{ + */ +#define FMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) +#define FMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) +#define FMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) +#define FMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) +#define FMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) +#define FMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) + +#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_ECCPageSize_256Bytes) || \ + ((SIZE) == FMC_ECCPageSize_512Bytes) || \ + ((SIZE) == FMC_ECCPageSize_1024Bytes) || \ + ((SIZE) == FMC_ECCPageSize_2048Bytes) || \ + ((SIZE) == FMC_ECCPageSize_4096Bytes) || \ + ((SIZE) == FMC_ECCPageSize_8192Bytes)) +/** + * @} + */ + +/** @defgroup FMC_TCLR_Setup_Time + * @{ + */ +#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_TAR_Setup_Time + * @{ + */ +#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_Setup_Time + * @{ + */ +#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_Wait_Setup_Time + * @{ + */ +#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_Hold_Setup_Time + * @{ + */ +#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** @defgroup FMC_HiZ_Setup_Time + * @{ + */ +#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255) +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FMC_ColumnBits_Number + * @{ + */ +#define FMC_ColumnBits_Number_8b ((uint32_t)0x00000000) +#define FMC_ColumnBits_Number_9b ((uint32_t)0x00000001) +#define FMC_ColumnBits_Number_10b ((uint32_t)0x00000002) +#define FMC_ColumnBits_Number_11b ((uint32_t)0x00000003) + +#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_ColumnBits_Number_8b) || \ + ((COLUMN) == FMC_ColumnBits_Number_9b) || \ + ((COLUMN) == FMC_ColumnBits_Number_10b) || \ + ((COLUMN) == FMC_ColumnBits_Number_11b)) + +/** + * @} + */ + +/** @defgroup FMC_RowBits_Number + * @{ + */ +#define FMC_RowBits_Number_11b ((uint32_t)0x00000000) +#define FMC_RowBits_Number_12b ((uint32_t)0x00000004) +#define FMC_RowBits_Number_13b ((uint32_t)0x00000008) + +#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_RowBits_Number_11b) || \ + ((ROW) == FMC_RowBits_Number_12b) || \ + ((ROW) == FMC_RowBits_Number_13b)) + +/** + * @} + */ + +/** @defgroup FMC_SDMemory_Data_Width + * @{ + */ +#define FMC_SDMemory_Width_8b ((uint32_t)0x00000000) +#define FMC_SDMemory_Width_16b ((uint32_t)0x00000010) +#define FMC_SDMemory_Width_32b ((uint32_t)0x00000020) + +#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDMemory_Width_8b) || \ + ((WIDTH) == FMC_SDMemory_Width_16b) || \ + ((WIDTH) == FMC_SDMemory_Width_32b)) + +/** + * @} + */ + +/** @defgroup FMC_InternalBank_Number + * @{ + */ +#define FMC_InternalBank_Number_2 ((uint32_t)0x00000000) +#define FMC_InternalBank_Number_4 ((uint32_t)0x00000040) + +#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_InternalBank_Number_2) || \ + ((NUMBER) == FMC_InternalBank_Number_4)) + +/** + * @} + */ + + +/** @defgroup FMC_CAS_Latency + * @{ + */ +#define FMC_CAS_Latency_1 ((uint32_t)0x00000080) +#define FMC_CAS_Latency_2 ((uint32_t)0x00000100) +#define FMC_CAS_Latency_3 ((uint32_t)0x00000180) + +#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_CAS_Latency_1) || \ + ((LATENCY) == FMC_CAS_Latency_2) || \ + ((LATENCY) == FMC_CAS_Latency_3)) + +/** + * @} + */ + +/** @defgroup FMC_Write_Protection + * @{ + */ +#define FMC_Write_Protection_Disable ((uint32_t)0x00000000) +#define FMC_Write_Protection_Enable ((uint32_t)0x00000200) + +#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_Write_Protection_Disable) || \ + ((WRITE) == FMC_Write_Protection_Enable)) + +/** + * @} + */ + + +/** @defgroup FMC_SDClock_Period + * @{ + */ +#define FMC_SDClock_Disable ((uint32_t)0x00000000) +#define FMC_SDClock_Period_2 ((uint32_t)0x00000800) +#define FMC_SDClock_Period_3 ((uint32_t)0x00000C00) + +#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDClock_Disable) || \ + ((PERIOD) == FMC_SDClock_Period_2) || \ + ((PERIOD) == FMC_SDClock_Period_3)) + +/** + * @} + */ + +/** @defgroup FMC_Read_Burst + * @{ + */ +#define FMC_Read_Burst_Disable ((uint32_t)0x00000000) +#define FMC_Read_Burst_Enable ((uint32_t)0x00001000) + +#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_Read_Burst_Disable) || \ + ((RBURST) == FMC_Read_Burst_Enable)) + +/** + * @} + */ + +/** @defgroup FMC_ReadPipe_Delay + * @{ + */ +#define FMC_ReadPipe_Delay_0 ((uint32_t)0x00000000) +#define FMC_ReadPipe_Delay_1 ((uint32_t)0x00002000) +#define FMC_ReadPipe_Delay_2 ((uint32_t)0x00004000) + +#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_ReadPipe_Delay_0) || \ + ((DELAY) == FMC_ReadPipe_Delay_1) || \ + ((DELAY) == FMC_ReadPipe_Delay_2)) + +/** + * @} + */ + +/** @defgroup FMC_LoadToActive_Delay + * @{ + */ +#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_ExitSelfRefresh_Delay + * @{ + */ +#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_SelfRefresh_Time + * @{ + */ +#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_RowCycle_Delay + * @{ + */ +#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_Write_Recovery_Time + * @{ + */ +#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_RP_Delay + * @{ + */ +#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) +/** + * @} + */ + +/** @defgroup FMC_RCD_Delay + * @{ + */ +#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) + +/** + * @} + */ + +/** @defgroup FMC_Command_Mode + * @{ + */ +#define FMC_Command_Mode_normal ((uint32_t)0x00000000) +#define FMC_Command_Mode_CLK_Enabled ((uint32_t)0x00000001) +#define FMC_Command_Mode_PALL ((uint32_t)0x00000002) +#define FMC_Command_Mode_AutoRefresh ((uint32_t)0x00000003) +#define FMC_Command_Mode_LoadMode ((uint32_t)0x00000004) +#define FMC_Command_Mode_Selfrefresh ((uint32_t)0x00000005) +#define FMC_Command_Mode_PowerDown ((uint32_t)0x00000006) + +#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_Command_Mode_normal) || \ + ((COMMAND) == FMC_Command_Mode_CLK_Enabled) || \ + ((COMMAND) == FMC_Command_Mode_PALL) || \ + ((COMMAND) == FMC_Command_Mode_AutoRefresh) || \ + ((COMMAND) == FMC_Command_Mode_LoadMode) || \ + ((COMMAND) == FMC_Command_Mode_Selfrefresh) || \ + ((COMMAND) == FMC_Command_Mode_PowerDown)) + +/** + * @} + */ + +/** @defgroup FMC_Command_Target + * @{ + */ +#define FMC_Command_Target_bank2 ((uint32_t)0x00000008) +#define FMC_Command_Target_bank1 ((uint32_t)0x00000010) +#define FMC_Command_Target_bank1_2 ((uint32_t)0x00000018) + +#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_Command_Target_bank1) || \ + ((TARGET) == FMC_Command_Target_bank2) || \ + ((TARGET) == FMC_Command_Target_bank1_2)) + +/** + * @} + */ + +/** @defgroup FMC_AutoRefresh_Number + * @{ + */ +#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16)) + +/** + * @} + */ + +/** @defgroup FMC_ModeRegister_Definition + * @{ + */ +#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191) + +/** + * @} + */ + + +/** @defgroup FMC_Mode_Status + * @{ + */ +#define FMC_NormalMode_Status ((uint32_t)0x00000000) +#define FMC_SelfRefreshMode_Status FMC_SDSR_MODES1_0 +#define FMC_PowerDownMode_Status FMC_SDSR_MODES1_1 + +#define IS_FMC_MODE_STATUS(STATUS) (((STATUS) == FMC_NormalMode_Status) || \ + ((STATUS) == FMC_SelfRefreshMode_Status) || \ + ((STATUS) == FMC_PowerDownMode_Status)) + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FMC_Interrupt_sources + * @{ + */ +#define FMC_IT_RisingEdge ((uint32_t)0x00000008) +#define FMC_IT_Level ((uint32_t)0x00000010) +#define FMC_IT_FallingEdge ((uint32_t)0x00000020) +#define FMC_IT_Refresh ((uint32_t)0x00004000) + +#define IS_FMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000)) +#define IS_FMC_GET_IT(IT) (((IT) == FMC_IT_RisingEdge) || \ + ((IT) == FMC_IT_Level) || \ + ((IT) == FMC_IT_FallingEdge) || \ + ((IT) == FMC_IT_Refresh)) + +#define IS_FMC_IT_BANK(BANK) (((BANK) == FMC_Bank2_NAND) || \ + ((BANK) == FMC_Bank3_NAND) || \ + ((BANK) == FMC_Bank4_PCCARD) || \ + ((BANK) == FMC_Bank1_SDRAM) || \ + ((BANK) == FMC_Bank2_SDRAM)) +/** + * @} + */ + +/** @defgroup FMC_Flags + * @{ + */ +#define FMC_FLAG_RisingEdge ((uint32_t)0x00000001) +#define FMC_FLAG_Level ((uint32_t)0x00000002) +#define FMC_FLAG_FallingEdge ((uint32_t)0x00000004) +#define FMC_FLAG_FEMPT ((uint32_t)0x00000040) +#define FMC_FLAG_Refresh FMC_SDSR_RE +#define FMC_FLAG_Busy FMC_SDSR_BUSY + +#define IS_FMC_GET_FLAG(FLAG) (((FLAG) == FMC_FLAG_RisingEdge) || \ + ((FLAG) == FMC_FLAG_Level) || \ + ((FLAG) == FMC_FLAG_FallingEdge) || \ + ((FLAG) == FMC_FLAG_FEMPT) || \ + ((FLAG) == FMC_FLAG_Refresh) || \ + ((FLAG) == FMC_SDSR_BUSY)) + +#define IS_FMC_GETFLAG_BANK(BANK) (((BANK) == FMC_Bank2_NAND) || \ + ((BANK) == FMC_Bank3_NAND) || \ + ((BANK) == FMC_Bank4_PCCARD) || \ + ((BANK) == FMC_Bank1_SDRAM) || \ + ((BANK) == FMC_Bank2_SDRAM) || \ + ((BANK) == (FMC_Bank1_SDRAM | FMC_Bank2_SDRAM))) + +#define IS_FMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) + + +/** + * @} + */ + +/** @defgroup FMC_Refresh_count + * @{ + */ +#define IS_FMC_REFRESH_COUNT(COUNT) ((COUNT) <= 8191) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/* NOR/SRAM Controller functions **********************************************/ +void FMC_NORSRAMDeInit(uint32_t FMC_Bank); +void FMC_NORSRAMInit(FMC_NORSRAMInitTypeDef* FMC_NORSRAMInitStruct); +void FMC_NORSRAMStructInit(FMC_NORSRAMInitTypeDef* FMC_NORSRAMInitStruct); +void FMC_NORSRAMCmd(uint32_t FMC_Bank, FunctionalState NewState); + +/* NAND Controller functions **************************************************/ +void FMC_NANDDeInit(uint32_t FMC_Bank); +void FMC_NANDInit(FMC_NANDInitTypeDef* FMC_NANDInitStruct); +void FMC_NANDStructInit(FMC_NANDInitTypeDef* FMC_NANDInitStruct); +void FMC_NANDCmd(uint32_t FMC_Bank, FunctionalState NewState); +void FMC_NANDECCCmd(uint32_t FMC_Bank, FunctionalState NewState); +uint32_t FMC_GetECC(uint32_t FMC_Bank); + +/* PCCARD Controller functions ************************************************/ +void FMC_PCCARDDeInit(void); +void FMC_PCCARDInit(FMC_PCCARDInitTypeDef* FMC_PCCARDInitStruct); +void FMC_PCCARDStructInit(FMC_PCCARDInitTypeDef* FMC_PCCARDInitStruct); +void FMC_PCCARDCmd(FunctionalState NewState); + +/* SDRAM Controller functions ************************************************/ +void FMC_SDRAMDeInit(uint32_t FMC_Bank); +void FMC_SDRAMInit(FMC_SDRAMInitTypeDef* FMC_SDRAMInitStruct); +void FMC_SDRAMStructInit(FMC_SDRAMInitTypeDef* FMC_SDRAMInitStruct); +void FMC_SDRAMCmdConfig(FMC_SDRAMCommandTypeDef* FMC_SDRAMCommandStruct); +uint32_t FMC_GetModeStatus(uint32_t SDRAM_Bank); +void FMC_SetRefreshCount(uint32_t FMC_Count); +void FMC_SetAutoRefresh_Number(uint32_t FMC_Number); +void FMC_SDRAMWriteProtectionConfig(uint32_t SDRAM_Bank, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void FMC_ITConfig(uint32_t FMC_Bank, uint32_t FMC_IT, FunctionalState NewState); +FlagStatus FMC_GetFlagStatus(uint32_t FMC_Bank, uint32_t FMC_FLAG); +void FMC_ClearFlag(uint32_t FMC_Bank, uint32_t FMC_FLAG); +ITStatus FMC_GetITStatus(uint32_t FMC_Bank, uint32_t FMC_IT); +void FMC_ClearITPendingBit(uint32_t FMC_Bank, uint32_t FMC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F4xx_FMC_H */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |