diff options
Diffstat (limited to 'drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h')
-rw-r--r-- | drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h | 100 |
1 files changed, 0 insertions, 100 deletions
diff --git a/drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h b/drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h deleted file mode 100644 index bca5caf8..00000000 --- a/drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/** - * @file drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h - * @brief GDISP Graphic Driver subsystem board interface for the ILI9320 display. - */ - -#ifndef GDISP_LLD_BOARD_H -#define GDISP_LLD_BOARD_H - -// For a multiple display configuration we would put all this in a structure and then -// set g->board to that structure. -#define GDISP_REG (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */ -#define GDISP_RAM (*((volatile uint16_t *) 0x60100000)) /* RS = 1 */ - -static inline void init_board(GDisplay *g) { - - // As we are not using multiple displays we set g->board to NULL as we don't use it. - g->board = 0; - - switch(g->controllerdisplay) { - case 0: // Set up for Display 0 - /* FSMC setup for F1 */ - rccEnableAHB(RCC_AHBENR_FSMCEN, 0); - - /* set pin modes */ - IOBus busD = {GPIOD, PAL_WHOLE_PORT, 0}; - IOBus busE = {GPIOE, PAL_WHOLE_PORT, 0}; - palSetBusMode(&busD, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - palSetBusMode(&busE, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - palSetPadMode(GPIOE, GPIOE_TFT_RST, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, GPIOD_TFT_LIGHT, PAL_MODE_OUTPUT_PUSHPULL); - - /* FSMC timing */ - FSMC_Bank1->BTCR[0+1] = (6) | (10 << 8) | (10 << 16); - - /* Bank1 NOR/SRAM control register configuration - * This is actually not needed as already set by default after reset */ - FSMC_Bank1->BTCR[0] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN; - break; - } -} - -static inline void post_init_board(GDisplay *g) { - (void) g; -} - -static inline void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - if(state) - palClearPad(GPIOE, GPIOE_TFT_RST); - else - palSetPad(GPIOE, GPIOE_TFT_RST); -} - -static inline void set_backlight(GDisplay *g, uint8_t percent) { - (void) g; - if(percent) - palClearPad(GPIOD, GPIOD_TFT_LIGHT); - else - palSetPad(GPIOD, GPIOD_TFT_LIGHT); -} - -static inline void acquire_bus(GDisplay *g) { - (void) g; -} - -static inline void release_bus(GDisplay *g) { - (void) g; -} - -static inline void write_index(GDisplay *g, uint16_t index) { - (void) g; - GDISP_REG = index; -} - -static inline void write_data(GDisplay *g, uint16_t data) { - (void) g; - GDISP_RAM = data; -} - -static inline void setreadmode(GDisplay *g) { - (void) g; -} - -static inline void setwritemode(GDisplay *g) { - (void) g; -} - -static inline uint16_t read_data(GDisplay *g) { - (void) g; - return GDISP_RAM; -} - -#endif /* GDISP_LLD_BOARD_H */ |