1 files changed, 0 insertions, 112 deletions
diff --git a/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h b/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h
deleted file mode 100644
index 60508c1a..00000000
--- a/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/*
-	driver quickly hacked together from a chinese sourcecode that came
-	with the board and existing ili9320 code by Chris van Dongen (sjaak)
-	(sjaak2002 at msn.com)
-	
-	Also added rotation for 180 and 270 degrees and minor tweaks to
-	setcursor
-	
-	Added code comes without warranty and free bugs. Feel free to use 
-	or misuse the added code :D
-*/
-
-
-/**
- * @file    drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h
- * @brief   GDISP Graphic Driver subsystem board interface for the ILI9325 display.
- */
-
-#ifndef GDISP_LLD_BOARD_H
-#define GDISP_LLD_BOARD_H
-
-// For a multiple display configuration we would put all this in a structure and then
-//	set g->board to that structure.
-#define GDISP_REG              (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
-#define GDISP_RAM              (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
-
-static inline void init_board(GDisplay *g) {
-
-	// As we are not using multiple displays we set g->board to NULL as we don't use it.
-	g->board = 0;
-
-	switch(g->controllerdisplay) {
-	case 0:											// Set up for Display 0
-		/* FSMC setup for F1 */
-		rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
-
-		/* set pin modes */
-	/*	IOBus busD = {GPIOD, PAL_WHOLE_PORT, 0};
-		IOBus busE = {GPIOE, PAL_WHOLE_PORT, 0};
-		palSetBusMode(&busD, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-		palSetBusMode(&busE, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
-		palSetPadMode(GPIOE, GPIOE_TFT_RST, PAL_MODE_OUTPUT_PUSHPULL);
-		palSetPadMode(GPIOD, GPIOD_TFT_LIGHT, PAL_MODE_OUTPUT_PUSHPULL); */
-
-		const unsigned char FSMC_Bank = 0;
-
-		/* FSMC timing */
-		FSMC_Bank1->BTCR[FSMC_Bank+1] = (6) | (10 << 8) | (10 << 16);
-
-		/* Bank1 NOR/SRAM control register configuration
-		 * This is actually not needed as already set by default after reset */
-		FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
-		break;
-	}
-}
-
-static inline void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static inline void setpin_reset(GDisplay *g, bool_t state) {
-	(void) g;
-	if(state)
-		palClearPad(GPIOE, GPIOE_TFT_RST);
-	else
-		palSetPad(GPIOE, GPIOE_TFT_RST);
-}
-
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
-	(void) g;
-	(void)percent;
-}
-
-static inline void acquire_bus(GDisplay *g) {
-	(void) g;
-}
-
-static inline void release_bus(GDisplay *g) {
-	(void) g;
-}
-
-static inline void write_index(GDisplay *g, uint16_t index) {
-	(void) g;
-	GDISP_REG = index;
-}
-
-static inline void write_data(GDisplay *g, uint16_t data) {
-	(void) g;
-	GDISP_RAM = data;
-}
-
-static inline void setreadmode(GDisplay *g) {
-	(void) g;
-}
-
-static inline void setwritemode(GDisplay *g) {
-	(void) g;
-}
-
-static inline uint16_t read_data(GDisplay *g) {
-	(void) g;
-	return GDISP_RAM;
-}
-
-#endif /* GDISP_LLD_BOARD_H */