1 files changed, 96 insertions, 0 deletions
diff --git a/drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h b/drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h
new file mode 100644
index 00000000..faa5854a
--- /dev/null
+++ b/drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h
@@ -0,0 +1,96 @@
+/*
+    ChibiOS/GFX - Copyright (C) 2012
+                 Joel Bodenmann aka Tectu <joel@unormal.org>
+
+    This file is part of ChibiOS/GFX.
+
+    ChibiOS/GFX is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS/GFX is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+	driver quickly hacked together from a chinese sourcecode that came
+	with the board and existing ili9320 code by Chris van Dongen (sjaak)
+	(sjaak2002 at msn.com)
+	
+	Also added rotation for 180 and 270 degrees and minor tweaks to
+	setcursor
+	
+	Added code comes without warranty and free bugs. Feel free to use 
+	or misuse the added code :D
+*/
+
+
+/**
+ * @file    drivers/gdisp/ILI9325/gdisp_lld_board_hy_stm32_100p.h
+ * @brief   GDISP Graphic Driver subsystem board interface for the ILI9325 display.
+ *
+ * @addtogroup GDISP
+ * @{
+ */
+
+#ifndef GDISP_LLD_BOARD_H
+#define GDISP_LLD_BOARD_H
+
+#define GDISP_REG              (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
+#define GDISP_RAM              (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
+
+static __inline void GDISP_LLD(init_board)(void) {
+	/* FSMC setup for F1 */
+	rccEnableAHB(RCC_AHBENR_FSMCEN, 0);
+
+    /* set pin modes */
+/*    IOBus busD = {GPIOD, PAL_WHOLE_PORT, 0}; 
+    IOBus busE = {GPIOE, PAL_WHOLE_PORT, 0}; 
+    palSetBusMode(&busD, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+    palSetBusMode(&busE, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+	palSetPadMode(GPIOE, GPIOE_TFT_RST, PAL_MODE_OUTPUT_PUSHPULL);
+	palSetPadMode(GPIOD, GPIOD_TFT_LIGHT, PAL_MODE_OUTPUT_PUSHPULL); */
+
+    const unsigned char FSMC_Bank = 0;
+
+    /* FSMC timing */
+    FSMC_Bank1->BTCR[FSMC_Bank+1] = (6) | (10 << 8) | (10 << 16);
+
+    /* Bank1 NOR/SRAM control register configuration
+     * This is actually not needed as already set by default after reset */
+    FSMC_Bank1->BTCR[FSMC_Bank] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
+	
+}
+
+static __inline void GDISP_LLD(setpin_reset)(bool_t state) {
+	if(state)
+		palClearPad(GPIOE, GPIOE_TFT_RST);
+	else
+		palSetPad(GPIOE, GPIOE_TFT_RST);
+}
+
+static __inline void GDISP_LLD(write_index)(uint16_t reg) {
+	GDISP_REG = reg;
+}
+
+static __inline void GDISP_LLD(write_data)(uint16_t data) {
+	GDISP_RAM = data;
+}
+
+static __inline uint16_t GDISP_LLD(read_data)(void) {
+	return GDISP_RAM;
+}
+
+static __inline void GDISP_LLD(set_backlight)(uint8_t percent) {
+	percent=percent;	// avoid a warning
+}
+
+#endif /* GDISP_LLD_BOARD_H */
+/** @} */
+