diff options
Diffstat (limited to 'drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h')
-rw-r--r-- | drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h | 128 |
1 files changed, 0 insertions, 128 deletions
diff --git a/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h b/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h deleted file mode 100644 index 43cc4830..00000000 --- a/drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/** - * @file drivers/gdisp/Nokia6610GE8/gdisp_lld_board_template.h - * @brief GDISP Graphic Driver subsystem board interface for the Nokia6610 GE8 display. - * - * @addtogroup GDISP - * @{ - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -/* - * Set various display properties. These properties mostly depend on the exact controller chip you get. - * The defaults should work for most controllers. - */ -//#define GDISP_GE8_BROKEN_CONTROLLER FALSE // Uncomment this out if you have a controller thats not window wrap broken. -//#define GDISP_SCREEN_HEIGHT 130 // The visible display height -//#define GDISP_SCREEN_WIDTH 130 // The visible display width -//#define GDISP_RAM_X_OFFSET 0 // The x offset of the visible area -//#define GDISP_RAM_Y_OFFSET 2 // The y offset of the visible area -//#define GDISP_SLEEP_SIZE 32 // The size of the sleep mode partial display -//#define GDISP_SLEEP_POS 50 // The position of the sleep mode partial display -//#define GDISP_INITIAL_CONTRAST 38 // The initial contrast percentage -//#define GDISP_INITIAL_BACKLIGHT 100 // The initial backlight percentage - -/** - * @brief Initialise the board for the display. - * @notes Performs the following functions: - * 1. initialise the spi port used by your display - * 2. initialise the reset pin (initial state not-in-reset) - * 3. initialise the chip select pin (initial state not-active) - * 4. initialise the backlight pin (initial state back-light off) - * - * @notapi - */ -static inline void init_board(void) { - -} - -/** - * @brief Set or clear the lcd reset pin. - * - * @param[in] state TRUE = lcd in reset, FALSE = normal operation - * - * @notapi - */ -static inline void setpin_reset(bool_t state) { - -} - -/** - * @brief Set the lcd back-light level. - * @note For now 0% turns the backlight off, anything else the backlight is on. - * While the hardware supports PWM backlight control, we are not using it - * yet. - * - * @param[in] percent 0 to 100% - * - * @notapi - */ -static inline void set_backlight(uint8_t percent) { - -} - -/** - * @brief Take exclusive control of the bus - * - * @notapi - */ -static inline void acquire_bus(void) { - -} - -/** - * @brief Release exclusive control of the bus - * - * @notapi - */ -static inline void release_bus(void) { - -} - -/** - * @brief Send an 8 bit command to the lcd. - * - * @param[in] cmd The command to send - * - * @notapi - */ -static inline void write_cmd(uint16_t cmd) { - -} - -/** - * @brief Send an 8 bit data to the lcd. - * - * @param[in] data The data to send - * - * @notapi - */ -static inline void write_data(uint16_t data) { - -} - -#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__) -/** - * @brief Read data from the lcd. - * - * @return The data from the lcd - * @note The chip select may need to be asserted/de-asserted - * around the actual spi read - * - * @notapi - */ -static inline uint16_t read_data(void) { - -} -#endif - -#endif /* _GDISP_LLD_BOARD_H */ -/** @} */ |