1 files changed, 0 insertions, 71 deletions
diff --git a/drivers/gdisp/SSD1306/board_SSD1306_template.h b/drivers/gdisp/SSD1306/board_SSD1306_template.h
index 5b4bd05c..0bd3f803 100644
--- a/drivers/gdisp/SSD1306/board_SSD1306_template.h
+++ b/drivers/gdisp/SSD1306/board_SSD1306_template.h
@@ -5,106 +5,37 @@
  *              http://ugfx.org/license.html
  */
 
-/**
- * @file    drivers/gdisp/SSD1306/board_SSD1306_template.h
- * @brief   GDISP Graphic Driver subsystem board interface for the SSD1306 display.
- *
- * @addtogroup GDISP
- * @{
- */
-
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-/**
- * @brief   Optional: A byte to prefix on each display page line.
- * @note	If not defined then no byte is prefixed on each page line.
- *
- * @notapi
- */
 //#define SSD1306_PAGE_PREFIX		0x40
 
-/**
- * @brief   Initialise the board for the display.
- *
- * @param[in] g			The GDisplay structure
- *
- * @note	Set the g->board member to whatever is appropriate. For multiple
- * 			displays this might be a pointer to the appropriate register set.
- *
- * @notapi
- */
 static inline void init_board(GDisplay *g) {
 	(void) g;
 }
 
-/**
- * @brief   After the initialisation.
- *
- * @param[in] g			The GDisplay structure
- *
- * @notapi
- */
 static inline void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-/**
- * @brief   Set or clear the lcd reset pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
- *
- * @notapi
- */
 static inline void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	(void) state;
 }
 
-/**
- * @brief   Take exclusive control of the bus
- *
- * @param[in] g				The GDisplay structure
- *
- * @notapi
- */
 static inline void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-/**
- * @brief   Release exclusive control of the bus
- *
- * @param[in] g				The GDisplay structure
- *
- * @notapi
- */
 static inline void release_bus(GDisplay *g) {
 	(void) g;
 }
 
-/**
- * @brief   Send a command to the controller.
- *
- * @param[in] g				The GDisplay structure
- * @param[in] cmd			The command to send *
- *
- * @notapi
- */
 static inline void write_cmd(GDisplay *g, uint8_t cmd) {
 	(void) g;
 	(void) cmd;
 }
 
-/**
- * @brief   Send data to the lcd.
- *
- * @param[in] g				The GDisplay structure
- * @param[in] data			The data to send
- *
- * @notapi
- */
 static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
 	(void) g;
 	(void) data;
@@ -112,5 +43,3 @@ static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
 }
 
 #endif /* _GDISP_LLD_BOARD_H */
-/** @} */
-