diff options
Diffstat (limited to 'drivers/gdisp/SSD1963/board_SSD1963_template.h')
| -rw-r--r-- | drivers/gdisp/SSD1963/board_SSD1963_template.h | 94 |
1 files changed, 0 insertions, 94 deletions
diff --git a/drivers/gdisp/SSD1963/board_SSD1963_template.h b/drivers/gdisp/SSD1963/board_SSD1963_template.h index 5e1999b8..f9f248e7 100644 --- a/drivers/gdisp/SSD1963/board_SSD1963_template.h +++ b/drivers/gdisp/SSD1963/board_SSD1963_template.h @@ -5,47 +5,9 @@ * http://ugfx.org/license.html */ -/** - * @file drivers/gdisp/SSD1963/board_SSD1963_template.h - * @brief GDISP Graphic Driver subsystem board interface for the SSD1963 display. - * - * @addtogroup GDISP - * @{ - */ - #ifndef _GDISP_LLD_BOARD_H #define _GDISP_LLD_BOARD_H -/** - * @brief LCD panel specs - * - * @note The timings need to follow the datasheet for your particular TFT/LCD screen - * (the actual screen, not the controller). - * @note Datasheets normally use a specific set of timings and acronyms, their value refers - * to the number of pixel clocks. Non-display periods refer to pulses/timings that occur - * before or after the timings that actually put pixels on the screen. Display periods - * refer to pulses/timings that directly put pixels on the screen. - * @note HDP: Horizontal Display Period, normally the width - 1<br> - * HT: Horizontal Total period (display + non-display)<br> - * HPS: non-display period between the start of the horizontal sync (LLINE) signal - * and the first display data<br> - * LPS: horizontal sync pulse (LLINE) start location in pixel clocks<br> - * HPW: Horizontal sync Pulse Width<br> - * VDP: Vertical Display period, normally height - 1<br> - * VT: Vertical Total period (display + non-display)<br> - * VPS: non-display period in lines between the start of the frame and the first display - * data in number of lines<br> - * FPS: vertical sync pulse (LFRAME) start location in lines.<br> - * VPW: Vertical sync Pulse Width - * @note Here's how to convert them:<br> - * SCREEN_HSYNC_FRONT_PORCH = ( HT - HPS ) - GDISP_SCREEN_WIDTH<br> - * SCREEN_HSYNC_PULSE = HPW<br> - * SCREEN_HSYNC_BACK_PORCH = HPS - HPW<br> - * SCREEN_VSYNC_FRONT_PORCH = ( VT - VPS ) - GDISP_SCREEN_HEIGHT<br> - * SCREEN_VSYNC_PULSE = VPW<br> - * SCREEN_VSYNC_BACK_PORCH = VPS - LPS<br> - */ - static const LCD_Parameters DisplayTimings[] = { // You need one of these array elements per display { @@ -58,91 +20,35 @@ static const LCD_Parameters DisplayTimings[] = { }, }; -/** - * @brief Initialise the board for the display. - * - * @param[in] g The GDisplay structure - * - * @note Set the g->board member to whatever is appropriate. For multiple - * displays this might be a pointer to the appropriate register set. - * - * @notapi - */ static inline void init_board(GDisplay *g) { (void) g; } -/** - * @brief After the initialisation. - * - * @param[in] g The GDisplay structure - * - * @notapi - */ static inline void post_init_board(GDisplay *g) { (void) g; } -/** - * @brief Set or clear the lcd reset pin. - * - * @param[in] g The GDisplay structure - * @param[in] state TRUE = lcd in reset, FALSE = normal operation - * - * @notapi - */ static inline void setpin_reset(GDisplay *g, bool_t state) { (void) g; (void) state; } -/** - * @brief Take exclusive control of the bus - * - * @param[in] g The GDisplay structure - * - * @notapi - */ static inline void acquire_bus(GDisplay *g) { (void) g; } -/** - * @brief Release exclusive control of the bus - * - * @param[in] g The GDisplay structure - * - * @notapi - */ static inline void release_bus(GDisplay *g) { (void) g; } -/** - * @brief Send data to the index register. - * - * @param[in] g The GDisplay structure - * @param[in] index The index register to set - * - * @notapi - */ static inline void write_index(GDisplay *g, uint16_t index) { (void) g; (void) index; } -/** - * @brief Send data to the lcd. - * - * @param[in] g The GDisplay structure - * @param[in] data The data to send - * - * @notapi - */ static inline void write_data(GDisplay *g, uint16_t data) { (void) g; (void) data; } #endif /* _GDISP_LLD_BOARD_H */ -/** @} */ |