1 files changed, 81 insertions, 0 deletions
diff --git a/drivers/gdisp/gdispNokia6610/GE12.h b/drivers/gdisp/gdispNokia6610/GE12.h
new file mode 100644
index 00000000..7f438d9a
--- /dev/null
+++ b/drivers/gdisp/gdispNokia6610/GE12.h
@@ -0,0 +1,81 @@
+/*
+    ChibiOS/RT - Copyright (C) 2012
+                 Joel Bodenmann aka Tectu <joel@unormal.org>
+
+    This file is part of ChibiOS-LCD-Driver.
+
+    ChibiOS-LCD-Driver is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS-LCD-Driver is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef GE12_H
+#define GE12_H
+
+// *************************************************************************************
+// LCD Include File for Philips PCF8833 STN RGB- 132x132x3 Driver (GE12)
+//
+// Taken from Philips data sheet Feb 14, 2003
+// *************************************************************************************
+
+// Philips PCF8833 LCD controller command codes
+#define NOP			0x00 // nop
+#define SWRESET		0x01 // software reset
+#define BSTROFF		0x02 // booster voltage OFF
+#define BSTRON		0x03 // booster voltage ON
+#define RDDIDIF		0x04 // read display identification
+#define RDDST		0x09 // read display status
+#define SLEEPIN		0x10 // sleep in
+#define SLEEPOUT	0x11 // sleep out
+#define PTLON		0x12 // partial display mode
+#define NORON		0x13 // display normal mode
+#define INVOFF		0x20 // inversion OFF
+#define INVON		0x21 // inversion ON
+#define DALO		0x22 // all pixel OFF
+#define DAL			0x23 // all pixel ON
+#define SETCON		0x25 // write contrast
+#define DISPOFF		0x28 // display OFF
+#define DISPON		0x29 // display ON
+#define CASET		0x2A // column address set
+#define PASET		0x2B // page address set
+#define RAMWR		0x2C // memory write
+#define RGBSET		0x2D // colour set
+#define PTLAR		0x30 // partial area
+#define VSCRDEF		0x33 // vertical scrolling definition
+#define TEOFF		0x34 // test mode
+#define TEON		0x35 // test mode
+#define MADCTL		0x36 // memory access control
+#define SEP			0x37 // vertical scrolling start address
+#define IDMOFF		0x38 // idle mode OFF
+#define IDMON		0x39 // idle mode ON
+#define COLMOD		0x3A // interface pixel format
+#define SETVOP		0xB0 // set Vop
+#define BRS			0xB4 // bottom row swap
+#define TRS			0xB6 // top row swap
+#define DISCTR		0xB9 // display control
+#define DOR			0xBA // data order
+#define TCDFE		0xBD // enable/disable DF temperature compensation
+#define TCVOPE		0xBF // enable/disable Vop temp comp
+#define EC			0xC0 // internal or external oscillator
+#define SETMUL		0xC2 // set multiplication factor
+#define TCVOPAB		0xC3 // set TCVOP slopes A and B
+#define TCVOPCD		0xC4 // set TCVOP slopes c and d
+#define TCDF		0xC5 // set divider frequency
+#define DF8COLOR	0xC6 // set divider frequency 8-color mode
+#define SETBS		0xC7 // set bias system
+#define RDTEMP		0xC8 // temperature read back
+#define NLI			0xC9 // n-line inversion
+#define RDID1		0xDA // read ID1
+#define RDID2		0xDB // read ID2
+#define RDID3		0xDC // read ID3
+
+#endif	/* GE12_H */