1 files changed, 0 insertions, 94 deletions
diff --git a/drivers/ginput/touch/ADS7843/ginput_lld_mouse.c b/drivers/ginput/touch/ADS7843/ginput_lld_mouse.c
deleted file mode 100644
index cb9b6f4e..00000000
--- a/drivers/ginput/touch/ADS7843/ginput_lld_mouse.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if (GFX_USE_GINPUT && GINPUT_NEED_MOUSE) /*|| defined(__DOXYGEN__)*/
-
-#include "src/ginput/driver_mouse.h"
-
-#include "ginput_lld_mouse_board.h"
-
-#if defined(GINPUT_MOUSE_YX_INVERTED) && GINPUT_MOUSE_YX_INVERTED
-	#define CMD_X 0x91
-	#define CMD_Y 0xD1
-#else
-	#define CMD_X 0xD1
-	#define CMD_Y 0x91
-#endif
-
-
-static uint16_t sampleBuf[7];
-static coord_t	lastx, lasty;
-
-static void filter(void) {
-	uint16_t temp;
-	int i,j;
-
-	for(i = 0; i < 4; i++) {
-		for(j = i; j < 7; j++) {
-			if(sampleBuf[i] > sampleBuf[j]) {
-				/* Swap the values */
-				temp = sampleBuf[i];
-				sampleBuf[i] = sampleBuf[j];
-				sampleBuf[j] = temp;
-			}
-		}
-	}
-}
-
-void ginput_lld_mouse_init(void) {
-	init_board();
-}
-
-void ginput_lld_mouse_get_reading(MouseReading *pt) {
-	uint16_t i;
-
-	// If touch-off return the previous results
-	if (!getpin_pressed()) {
-		pt->x = lastx;
-		pt->y = lasty;
-		pt->z = 0;
-		pt->buttons = 0;
-		return;
-	}
-	
-	// Read the port to get the touch settings
-	aquire_bus();
-
-	/* Get the X value
-	 * Discard the first conversion - very noisy and keep the ADC on hereafter
-	 * till we are done with the sampling. Note that PENIRQ is disabled while reading.
-	 * Finally switch on PENIRQ once again - perform a dummy read.
-	 * Once we have the readings, find the medium using our filter function
- 	 */
-	read_value(CMD_X);
-	for(i = 0; i < 7; i++)
-		sampleBuf[i] = read_value(CMD_X);
-	read_value(CMD_X-1);
-	filter();
-	lastx = (coord_t)sampleBuf[3];
-
-	/* Get the Y value using the same process as above */
-	read_value(CMD_Y);
-	for(i = 0; i < 7; i++)
-		sampleBuf[i] = read_value(CMD_Y);
-	read_value(CMD_Y-1);
-	filter();
-	lasty = (coord_t)sampleBuf[3];
-
-	// Release the bus
-	release_bus();
-	
-	// Return the results
-	pt->x = lastx;
-	pt->y = lasty;
-	pt->z = 100;
-	pt->buttons = GINPUT_TOUCH_PRESSED;
-}
-
-#endif /* GFX_USE_GINPUT && GINPUT_NEED_MOUSE */