1 files changed, 0 insertions, 151 deletions
diff --git a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_pic32mx_lcd.h b/drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_pic32mx_lcd.h
deleted file mode 100644
index c4689ecb..00000000
--- a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_pic32mx_lcd.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
- * @brief   GINPUT Touch low level driver source for the MCU on the example board.
- *
- * @defgroup Mouse Mouse
- * @ingroup GINPUT
- *
- * @{
- */
-
-#ifndef _GINPUT_LLD_MOUSE_BOARD_H
-#define _GINPUT_LLD_MOUSE_BOARD_H
-
-static const ADCConfig ADCC = {
-  .vref = ADC_VREF_CFG_AVDD_AVSS,
-  .stime = 15,
-  .irq = EIC_IRQ_ADC,
-  .base = _ADC10_BASE_ADDRESS,
-};
-static struct ADCDriver ADCD;
-
-#define YNEG 13 // U
-#define XNEG 15 // R
-#define XPOS 12 // L
-#define YPOS 11 // D
-
-#define ADC_MAX 1023
-
-#define TOUCH_THRESHOULD 50
-
-static const ADCConversionGroup ADC_X_CG = {
-  .circular = FALSE,
-  .num_channels = 1,
-  .channels = 1 << XNEG,
-};
-
-static const ADCConversionGroup ADC_Y_CG = {
-  .circular = FALSE,
-  .num_channels = 1,
-  .channels = 1 << YPOS,
-};
-
-/**
- * @brief   Initialise the board for the touch.
- *
- * @notapi
- */
-static inline void init_board(void) {
-  adcObjectInit(&ADCD);
-  adcStart(&ADCD, &ADCC);
-}
-
-/**
- * @brief   Check whether the surface is currently touched
- * @return	TRUE if the surface is currently touched
- *
- * @notapi
- */
-static inline bool_t getpin_pressed(void) {
-  adcsample_t samples[2] = {0, };
-
-  // Set X+ to ground
-  palSetPadMode(IOPORTB, XPOS, PAL_MODE_OUTPUT);
-  palClearPad(IOPORTB, XPOS);
-
-  // Set Y- to VCC
-  palSetPadMode(IOPORTB, YNEG, PAL_MODE_OUTPUT);
-  palSetPad(IOPORTB, YNEG);
-
-  palSetPadMode(IOPORTB, XNEG, PAL_MODE_INPUT_ANALOG);
-  palSetPadMode(IOPORTB, YPOS, PAL_MODE_INPUT_ANALOG);
-
-  adcConvert(&ADCD, &ADC_X_CG, &samples[0], 1);
-  adcConvert(&ADCD, &ADC_Y_CG, &samples[1], 1);
-
-  return (ADC_MAX - (samples[1] - samples[0])) > TOUCH_THRESHOULD;
-}
-
-/**
- * @brief   Aquire the bus ready for readings
- *
- * @notapi
- */
-static inline void aquire_bus(void) {
-}
-
-/**
- * @brief   Release the bus after readings
- *
- * @notapi
- */
-static inline void release_bus(void) {
-}
-
-/**
- * @brief   Read an x value from touch controller
- * @return	The value read from the controller
- *
- * @notapi
- */
-static inline uint16_t read_x_value(void) {
-  adcsample_t sample;
-
-  palSetPadMode(IOPORTB, XPOS, PAL_MODE_OUTPUT);
-  palSetPad(IOPORTB, XPOS);
-
-  palSetPadMode(IOPORTB, XNEG, PAL_MODE_OUTPUT);
-  palClearPad(IOPORTB, XNEG);
-
-  palSetPadMode(IOPORTB, YNEG, PAL_MODE_INPUT);
-
-  palSetPadMode(IOPORTB, YPOS, PAL_MODE_INPUT_ANALOG);
-
-  adcConvert(&ADCD, &ADC_Y_CG, &sample, 1);
-
-  return ADC_MAX - sample;
-}
-
-/**
- * @brief   Read an y value from touch controller
- * @return	The value read from the controller
- *
- * @notapi
- */
-static inline uint16_t read_y_value(void) {
-  adcsample_t sample;
-
-  palSetPadMode(IOPORTB, YNEG, PAL_MODE_OUTPUT);
-  palClearPad(IOPORTB, YNEG);
-
-  palSetPadMode(IOPORTB, YPOS, PAL_MODE_OUTPUT);
-  palSetPad(IOPORTB, YPOS);
-
-  palSetPadMode(IOPORTB, XPOS, PAL_MODE_INPUT);
-
-  palSetPadMode(IOPORTB, XNEG, PAL_MODE_INPUT_ANALOG);
-
-  adcConvert(&ADCD, &ADC_X_CG, &sample, 1);
-
-  return ADC_MAX - sample;
-}
-
-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
-/** @} */