aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ginput/touch/STMPE811/ginput_lld_mouse.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ginput/touch/STMPE811/ginput_lld_mouse.c')
-rw-r--r--drivers/ginput/touch/STMPE811/ginput_lld_mouse.c63
1 files changed, 38 insertions, 25 deletions
diff --git a/drivers/ginput/touch/STMPE811/ginput_lld_mouse.c b/drivers/ginput/touch/STMPE811/ginput_lld_mouse.c
index bfdc964b..4f648a78 100644
--- a/drivers/ginput/touch/STMPE811/ginput_lld_mouse.c
+++ b/drivers/ginput/touch/STMPE811/ginput_lld_mouse.c
@@ -69,19 +69,19 @@ void ginput_lld_mouse_init(void)
chThdSleepMilliseconds(10);
write_reg(STMPE811_REG_SYS_CTRL2, 1, 0x0C); // Temperature sensor clock off, GPIO clock off, touch clock on, ADC clock on
- write_reg(STMPE811_REG_INT_EN, 1, 0x01); // Interrupt on INT pin when FIFO is equal or above threshold value OR touch is detected
- write_reg(STMPE811_REG_ADC_CTRL1, 1, 0x48); // ADC conversion time = 80 clock ticks, 12-bit ADC, internaal voltage refernce
+ write_reg(STMPE811_REG_INT_EN, 1, 0x02); // Interrupt on INT pin when FIFO is equal or above threshold value OR touch is detected
+ write_reg(STMPE811_REG_ADC_CTRL1, 1, 0x48); // ADC conversion time = 80 clock ticks, 12-bit ADC, internal voltage refernce
chThdSleepMilliseconds(2);
write_reg(STMPE811_REG_ADC_CTRL2, 1, 0x01); // ADC speed 3.25MHz
write_reg(STMPE811_REG_GPIO_AF, 1, 0x00); // GPIO alternate function - OFF
- write_reg(STMPE811_REG_TSC_CFG, 1, 0x9A); // Averaging 4, Touch detect delay 500 us, Panel driver settling time 500 us
+ write_reg(STMPE811_REG_TSC_CFG, 1, 0x9A); // Averaging 4, touch detect delay 500 us, panel driver settling time 500 us
write_reg(STMPE811_REG_FIFO_TH, 1, 0x01); // FIFO threshold = 1
write_reg(STMPE811_REG_FIFO_STA, 1, 0x01); // FIFO reset enable
write_reg(STMPE811_REG_FIFO_STA, 1, 0x00); // FIFO reset disable
write_reg(STMPE811_REG_TSC_FRACT_XYZ, 1, 0x07); // Z axis data format
write_reg(STMPE811_REG_TSC_I_DRIVE, 1, 0x01); // 50mA touchscreen line current
- write_reg(STMPE811_REG_TSC_CTRL, 1, 0x03); // X&Y only, TSC enable
+ write_reg(STMPE811_REG_TSC_CTRL, 1, 0x01); // X&Y&Z, TSC enable
write_reg(STMPE811_REG_INT_STA, 1, 0xFF); // Clear all interrupts
write_reg(STMPE811_REG_INT_CTRL, 1, 0x01); // Level interrupt, enable intrrupts
}
@@ -102,7 +102,7 @@ void ginput_lld_mouse_init(void)
*/
void ginput_lld_mouse_get_reading(MouseReading *pt)
{
- uint16_t buf;
+ //uint16_t buf;
uint8_t int_status;
// If not touched, return the previous results
@@ -118,26 +118,39 @@ void ginput_lld_mouse_get_reading(MouseReading *pt)
int_status = read_reg(STMPE811_REG_INT_STA, 1);
// If it is TOUCH interrupt, clear it and go on
- if (int_status & 0x01) {
- write_reg(STMPE811_REG_INT_STA, 1, 0x01);
-
- /* Get the X value */
- buf = read_reg(STMPE811_REG_TSC_DATA_X, 2);
- lastx = (coord_t)(buf);
-
- /* Get the Y value */
- buf = read_reg(STMPE811_REG_TSC_DATA_Y, 2);
- lasty = (coord_t)(buf);
-
- /* Get the Z value */
- buf = read_reg(STMPE811_REG_TSC_DATA_Z, 1);
- lastz = (buf & 0x00FF);
-
- // Return the results. ADC gives values from 0 to 2^12
- pt->x = lastx / 13;
- pt->y = lasty / 17;
- pt->z = 100;
- pt->buttons = GINPUT_TOUCH_PRESSED;
+ if (int_status & 0x02) {
+
+ uint8_t size = 0;
+ size = read_reg(STMPE811_REG_FIFO_SIZE, 1);
+
+ if (size) {
+ uint8_t buffer[size * 4];
+ read_reg_n(STMPE811_REG_TSC_DATA_AI, size * 4, buffer);
+
+ lastx = (coord_t)((buffer[0] << 4) | (buffer[1] >> 4));
+ lasty = (coord_t)(((buffer[1] & 0x0F) << 8) | buffer[2]);
+ lastz = (coord_t)buffer[3];
+
+ /* Get the X value */
+ //buf = read_reg(STMPE811_REG_TSC_DATA_X, 2);
+ //lastx = (coord_t)(buf);
+
+ /* Get the Y value */
+ //buf = read_reg(STMPE811_REG_TSC_DATA_Y, 2);
+ //lasty = (coord_t)(buf);
+
+ /* Get the Z value */
+ //buf = read_reg(STMPE811_REG_TSC_DATA_Z, 1);
+ //lastz = (buf & 0x00FF);
+
+ // Return the results. ADC gives values from 0 to 2^12
+ pt->x = 320 - lastx / 13;
+ pt->y = lasty / 17;
+ pt->z = lastz;
+ pt->buttons = GINPUT_TOUCH_PRESSED;
+ }
+
+ write_reg(STMPE811_REG_INT_STA, 1, 0x02);
}
}