aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/touchscreen/XPT2046
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/touchscreen/XPT2046')
-rw-r--r--drivers/touchscreen/XPT2046/readme.txt8
-rw-r--r--drivers/touchscreen/XPT2046/touchscreen_lld.c241
-rw-r--r--drivers/touchscreen/XPT2046/touchscreen_lld.mk6
-rw-r--r--drivers/touchscreen/XPT2046/touchscreen_lld_config.h84
4 files changed, 0 insertions, 339 deletions
diff --git a/drivers/touchscreen/XPT2046/readme.txt b/drivers/touchscreen/XPT2046/readme.txt
deleted file mode 100644
index a81caf67..00000000
--- a/drivers/touchscreen/XPT2046/readme.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-To use this driver:
-
-1. Add in your halconf.h:
- a) #define GFX_USE_TOUCHSCREEN TRUE
-
-2. To your makefile add the following lines:
- include $(GFXLIB)/drivers/touchscreen/XPT2046/touchscreen_lld.mk
-
diff --git a/drivers/touchscreen/XPT2046/touchscreen_lld.c b/drivers/touchscreen/XPT2046/touchscreen_lld.c
deleted file mode 100644
index 2d3689d4..00000000
--- a/drivers/touchscreen/XPT2046/touchscreen_lld.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- ChibiOS/GFX - Copyright (C) 2012
- Joel Bodenmann aka Tectu <joel@unormal.org>
-
- This file is part of ChibiOS/GFX.
-
- ChibiOS/GFX is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/GFX is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file drivers/touchscreen/XPT2046/touchscreen_lld.c
- * @brief Touchscreen Driver subsystem low level driver source.
- *
- * @addtogroup TOUCHSCREEN
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-#include "touchscreen.h"
-
-#if GFX_USE_TOUCHSCREEN /*|| defined(__DOXYGEN__)*/
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables. */
-/*===========================================================================*/
-#if !defined(__DOXYGEN__)
- /* Local copy of the current touchpad driver */
- static const TouchscreenDriver *tsDriver;
-
- static uint16_t sampleBuf[7];
-#endif
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/* ---- Required Routines ---- */
-
-/**
- * @brief Low level Touchscreen driver initialization.
- *
- * @param[in] ts The touchscreen driver struct
- *
- * @notapi
- */
-void ts_lld_init(const TouchscreenDriver *ts) {
- tsDriver = ts;
-
- if(tsDriver->direct_init)
- spiStart(tsDriver->spip, tsDriver->spicfg);
-}
-
-
-/**
- * @brief Reads a conversion from the touchscreen
- *
- * @param[in] cmd The command bits to send to the touchscreen
- *
- * @return The read value 12-bit right-justified
- *
- * @note This function only reads data, it is assumed that the pins are
- * configured properly and the bus has been acquired beforehand
- *
- * @notapi
- */
-uint16_t ts_lld_read_value(uint8_t cmd) {
- static uint8_t txbuf[3] = {0};
- static uint8_t rxbuf[3] = {0};
- uint16_t ret;
-
- txbuf[0] = cmd;
-
- spiExchange(tsDriver->spip, 3, txbuf, rxbuf);
-
- ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3);
-
- return ret;
-}
-
-/**
- * @brief 7-point median filtering code for touchscreen samples
- *
- * @note This is an internally used routine only.
- *
- * @notapi
- */
-static void ts_lld_filter(void) {
- uint16_t temp;
- int i,j;
-
- for(i = 0; i < 4; i++) {
- for(j = i; j < 7; j++) {
- if(sampleBuf[i] > sampleBuf[j]) {
- /* Swap the values */
- temp = sampleBuf[i];
- sampleBuf[i] = sampleBuf[j];
- sampleBuf[j] = temp;
- }
- }
- }
-}
-
-/**
- * @brief Reads out the X direction.
- *
- * @note The samples are median filtered for greater noise reduction
- *
- * @notapi
- */
-uint16_t ts_lld_read_x(void) {
- int i;
-
-#if defined(SPI_USE_MUTUAL_EXCLUSION)
- spiAcquireBus(tsDriver->spip);
-#endif
-
- TOUCHSCREEN_SPI_PROLOGUE();
- palClearPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
-
- /* Discard the first conversion - very noisy and keep the ADC on hereafter
- * till we are done with the sampling. Note that PENIRQ is disabled.
- */
- ts_lld_read_value(0xD1);
-
- for(i = 0; i < 7; i++) {
- sampleBuf[i] = ts_lld_read_value(0xD1);
- }
-
- /* Switch on PENIRQ once again - perform a dummy read */
- ts_lld_read_value(0xD0);
-
- palSetPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
- TOUCHSCREEN_SPI_EPILOGUE();
-
-#if defined(SPI_USE_MUTUAL_EXCLUSION)
- spiReleaseBus(tsDriver->spip);
-#endif
-
- /* Find the median - use selection sort */
- ts_lld_filter();
-
- return sampleBuf[3];
-}
-
-/*
- * @brief Reads out the Y direction.
- *
- * @notapi
- */
-uint16_t ts_lld_read_y(void) {
- int i;
-
-#if defined(SPI_USE_MUTUAL_EXCLUSION)
- spiAcquireBus(tsDriver->spip);
-#endif
-
- TOUCHSCREEN_SPI_PROLOGUE();
- palClearPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
-
- /* Discard the first conversion - very noisy and keep the ADC on hereafter
- * till we are done with the sampling. Note that PENIRQ is disabled.
- */
- ts_lld_read_value(0x91);
-
- for(i = 0; i < 7; i++) {
- sampleBuf[i] = ts_lld_read_value(0x91);
- }
-
- /* Switch on PENIRQ once again - perform a dummy read */
- ts_lld_read_value(0x90);
-
- palSetPad(tsDriver->spicfg->ssport, tsDriver->spicfg->sspad);
- TOUCHSCREEN_SPI_EPILOGUE();
-
-#ifdef SPI_USE_MUTUAL_EXCLUSION
- spiReleaseBus(tsDriver->spip);
-#endif
-
- /* Find the median - use selection sort */
- ts_lld_filter();
-
- return sampleBuf[3];
-}
-
-/* ---- Optional Routines ---- */
-#if TOUCHSCREEN_HAS_PRESSED || defined(__DOXYGEN__)
- /*
- * @brief for checking if touchscreen is pressed or not.
- *
- * @return 1 if pressed / 0 if not pressed
- *
- * @notapi
- */
- uint8_t ts_lld_pressed(void) {
- return (!palReadPad(tsDriver->tsIRQPort, tsDriver->tsIRQPin));
- }
-#endif
-
-#if TOUCHSCREEN_HAS_PRESSURE || defined(__DOXYGEN__)
- /*
- * @brief Reads out the Z direction / pressure.
- *
- * @notapi
- */
- uint16_t ts_lld_read_z(void) {
- /* ToDo */
- return 42;
- }
-#endif
-
-#endif /* GFX_USE_TOUCHSCREEN */
-/** @} */
-
diff --git a/drivers/touchscreen/XPT2046/touchscreen_lld.mk b/drivers/touchscreen/XPT2046/touchscreen_lld.mk
deleted file mode 100644
index 39d5caf9..00000000
--- a/drivers/touchscreen/XPT2046/touchscreen_lld.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-# List the required driver.
-GFXSRC += $(GFXLIB)/drivers/touchscreen/XPT2046/touchscreen_lld.c
-
-# Required include directories
-GFXINC += $(GFXLIB)/drivers/touchscreen/XPT2046
-
diff --git a/drivers/touchscreen/XPT2046/touchscreen_lld_config.h b/drivers/touchscreen/XPT2046/touchscreen_lld_config.h
deleted file mode 100644
index 3a030b5d..00000000
--- a/drivers/touchscreen/XPT2046/touchscreen_lld_config.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- ChibiOS/GFX - Copyright (C) 2012
- Joel Bodenmann aka Tectu <joel@unormal.org>
-
- This file is part of ChibiOS/GFX.
-
- ChibiOS/GFX is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/GFX is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file drivers/touchscreen/XPT2046/touchscreen_lld_config.h
- * @brief Touchscreen Driver subsystem low level driver.
- *
- * @addtogroup TOUCHSCREEN
- * @{
- */
-
-#ifndef TOUCHSCREEN_LLD_CONFIG_H
-#define TOUCHSCREEN_LLD_CONFIG_H
-
-#if GFX_USE_TOUCHSCREEN /*|| defined(__DOXYGEN__)*/
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-#define TOUCHSCREEN_HAS_PRESSED TRUE
-#define TOUCHSCREEN_HAS_PRESSURE TRUE
-
-struct TouchscreenDriver {
- /*
- * @brief Pointer to SPI driver.
- * @note SPI driver must be enabled in mcuconf.h and halconf.h
- */
- SPIDriver *spip;
-
- /*
- * @brief Pointer to the SPI configuration structure.
- * @note The lowest possible speed ~ 1-2MHz is to be used, otherwise
- * will result in a lot of noise
- */
- const SPIConfig *spicfg;
-
- /*
- * @brief Touchscreen controller TPIRQ pin GPIO port
- */
- ioportid_t tsIRQPort;
-
- /*
- * @brief Touchscreen controller TPIRQ GPIO pin
- * @note The interface is polled as of now, interrupt support is
- * to be implemented in the future.
- */
- ioportmask_t tsIRQPin;
-
- /*
- * @brief Initialize the SPI with the configuration struct given or not
- * If TRUE, spiStart is called by the init, otherwise not
- * @note This is provided in such a case when SPI port is being shared
- * across multiple peripherals, so not to disturb the SPI bus.
- * You can use TOUCHSCREEN_SPI_PROLOGUE() and TOUCHSCREEN_SPI_EPILOGUE()
- * macros to change the SPI configuration or speed before and
- * after using the touchpad. An example case would be sharing the
- * bus with a fast flash memory chip.
- */
- bool_t direct_init;
-};
-
-#endif /* GFX_USE_TOUCHSCREEN */
-
-#endif /* TOUCHSCREEN_LLD_CONFIG_H */
-/** @} */
-
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-30 16:53:07 +0000