1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
/*
* This file is subject to the terms of the GFX License. If a copy of
* the license was not distributed with this file, you can obtain one at:
*
* http://ugfx.io/license.html
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
#include "stm32f4xx_fmc.h"
#include "stm32f429i_discovery_sdram.h"
#include <string.h>
#define SPI_PORT &SPID5
#define DC_PORT GPIOD
#define DC_PIN GPIOD_LCD_WRX
static const SPIConfig spi_cfg = {
NULL,
GPIOC,
GPIOC_SPI5_LCD_CS,
((1 << 3) & SPI_CR1_BR) | SPI_CR1_SSM | SPI_CR1_SSI | SPI_CR1_MSTR
};
#define ALLOW_2ND_LAYER GFXON
static const ltdcConfig driverCfg = {
240, 320,
10, 2,
20, 2,
10, 4,
0,
0x000000,
{
(LLDCOLOR_TYPE *)SDRAM_BANK_ADDR, // frame
240, 320, // width, height
240 * LTDC_PIXELBYTES, // pitch
LTDC_PIXELFORMAT, // fmt
0, 0, // x, y
240, 320, // cx, cy
0x00000000, // defcolor
0x000000, // keycolor
LTDC_BLEND_FIX1_FIX2, // blending
0, // palette
0, // palettelen
0xFF, // alpha
LTDC_LEF_ENABLE // flags
},
#if ALLOW_2ND_LAYER
{ // Foreground layer config (if turned on)
(LLDCOLOR_TYPE *)(SDRAM_BANK_ADDR+(240 * 320 * LTDC_PIXELBYTES)), // Frame buffer address
240, 320, // width, height
240 * LTDC_PIXELBYTES, // pitch
LTDC_PIXELFORMAT, // fmt
0, 0, // x, y
240, 320, // cx, cy
0x00000000, // Default color (ARGB8888)
0x000000, // Color key (RGB888)
LTDC_BLEND_MOD1_MOD2, // Blending factors
0, // Palette (RGB888, can be NULL)
0, // Palette length
0xFF, // Constant alpha factor
LTDC_LEF_ENABLE // Layer configuration flags
}
#else
LTDC_UNUSED_LAYER_CONFIG
#endif
};
#include "ili9341.h"
static void acquire_bus(GDisplay *g) {
(void) g;
spiSelect(SPI_PORT);
}
static void release_bus(GDisplay *g) {
(void) g;
spiUnselect(SPI_PORT);
}
static void write_index(GDisplay *g, uint8_t index) {
static uint8_t sindex;
(void) g;
palClearPad(DC_PORT, DC_PIN);
sindex = index;
spiSend(SPI_PORT, 1, &sindex);
}
static void write_data(GDisplay *g, uint8_t data) {
static uint8_t sdata;
(void) g;
palSetPad(DC_PORT, DC_PIN);
sdata = data;
spiSend(SPI_PORT, 1, &sdata);
}
static void Init9341(GDisplay *g) {
#define REG_TYPEMASK 0xFF00
#define REG_DATAMASK 0x00FF
#define REG_DATA 0x0000
#define REG_COMMAND 0x0100
#define REG_DELAY 0x0200
static const uint16_t initdata[] = {
REG_COMMAND | ILI9341_CMD_RESET,
REG_DELAY | 5,
REG_COMMAND | ILI9341_CMD_DISPLAY_OFF,
REG_COMMAND | ILI9341_SET_FRAME_CTL_NORMAL, 0x00, 0x1B,
REG_COMMAND | ILI9341_SET_FUNCTION_CTL, 0x0A, 0xA2,
REG_COMMAND | ILI9341_SET_POWER_CTL_1, 0x10,
REG_COMMAND | ILI9341_SET_POWER_CTL_2, 0x10,
#if 1
REG_COMMAND | ILI9341_SET_VCOM_CTL_1, 0x45, 0x15,
REG_COMMAND | ILI9341_SET_VCOM_CTL_2, 0x90,
#else
REG_COMMAND | ILI9341_SET_VCOM_CTL_1, 0x35, 0x3E,
REG_COMMAND | ILI9341_SET_VCOM_CTL_2, 0xBE,
#endif
REG_COMMAND | ILI9341_SET_MEM_ACS_CTL, 0xC8,
REG_COMMAND | ILI9341_SET_RGB_IF_SIG_CTL, 0xC2,
REG_COMMAND | ILI9341_SET_FUNCTION_CTL, 0x0A, 0xA7, 0x27, 0x04,
REG_COMMAND | ILI9341_SET_COL_ADDR, 0x00, 0x00, 0x00, 0xEF,
REG_COMMAND | ILI9341_SET_PAGE_ADDR, 0x00, 0x00, 0x01, 0x3F,
REG_COMMAND | ILI9341_SET_IF_CTL, 0x01, 0x00, 0x06,
REG_COMMAND | ILI9341_SET_GAMMA, 0x01,
REG_COMMAND | ILI9341_SET_PGAMMA,
#if 1
0x0F, 0x29, 0x24, 0x0C, 0x0E, 0x09, 0x4E, 0x78,
0x3C, 0x09, 0x13, 0x05, 0x17, 0x11, 0x00,
#else
0x1F, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87,
0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00,
#endif
REG_COMMAND | ILI9341_SET_NGAMMA,
#if 1
0x00, 0x16, 0x1B, 0x04, 0x11, 0x07, 0x31, 0x33,
0x42, 0x05, 0x0C, 0x0A, 0x28, 0x2F, 0x0F,
#else
0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78,
0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f,
#endif
REG_COMMAND | ILI9341_CMD_SLEEP_OFF,
REG_DELAY | 10,
REG_COMMAND | ILI9341_CMD_DISPLAY_ON,
REG_COMMAND | ILI9341_SET_MEM
};
const uint16_t *p;
acquire_bus(g);
for(p = initdata; p < &initdata[sizeof(initdata)/sizeof(initdata[0])]; p++) {
switch(*p & REG_TYPEMASK) {
case REG_DATA: write_data(g, *p); break;
case REG_COMMAND: write_index(g, *p); break;
case REG_DELAY: gfxSleepMilliseconds(*p & 0xFF); break;
}
}
release_bus(g);
}
static void init_board(GDisplay *g) {
(void) g;
palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); // UART_TX
palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); // UART_RX
palSetPadMode(GPIOF, GPIOF_LCD_DCX, PAL_MODE_ALTERNATE(5));
palSetPadMode(GPIOF, GPIOF_LCD_DE, PAL_MODE_ALTERNATE(14));
#define STM32_SAISRC_NOCLOCK (0 << 23) /**< No clock. */
#define STM32_SAISRC_PLL (1 << 23) /**< SAI_CKIN is PLL. */
#define STM32_SAIR_DIV2 (0 << 16) /**< R divided by 2. */
#define STM32_SAIR_DIV4 (1 << 16) /**< R divided by 4. */
#define STM32_SAIR_DIV8 (2 << 16) /**< R divided by 8. */
#define STM32_SAIR_DIV16 (3 << 16) /**< R divided by 16. */
#define STM32_PLLSAIN_VALUE 192
#define STM32_PLLSAIQ_VALUE 7
#define STM32_PLLSAIR_VALUE 4
#define STM32_PLLSAIR_POST STM32_SAIR_DIV4
/* PLLSAI activation.*/
RCC->PLLSAICFGR = (STM32_PLLSAIN_VALUE << 6) | (STM32_PLLSAIR_VALUE << 28) | (STM32_PLLSAIQ_VALUE << 24);
RCC->DCKCFGR = (RCC->DCKCFGR & ~RCC_DCKCFGR_PLLSAIDIVR) | STM32_PLLSAIR_POST;
RCC->CR |= RCC_CR_PLLSAION;
while(!(RCC->CR & RCC_CR_PLLSAIRDY)); // wait for PLLSAI to lock
// Initialise the SDRAM
SDRAM_Init();
// Clear the SDRAM
memset((void *)SDRAM_BANK_ADDR, 0, 0x400000);
spiStart(SPI_PORT, &spi_cfg);
Init9341(g);
}
static GFXINLINE void post_init_board(GDisplay *g) {
(void) g;
}
static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
(void) g;
(void) percent;
}
#endif /* _GDISP_LLD_BOARD_H */
|