aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gdisp/ILI9481/gdisp_lld_board_firebullstm32f103.h
blob: 6e4edda95597c2da9e7bce1641da509349897fff (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
/*
 * This file is subject to the terms of the GFX License, v1.0. If a copy of
 * the license was not distributed with this file, you can obtain one at:
 *
 *              http://chibios-gfx.com/license.html
 */

/**
 * @file    drivers/gdisp/ILI9481/gdisp_lld_board_firebullstm32f103.h
 * @brief   GDISP Graphics Driver subsystem low level driver source for
 * 			the ILI9481 and compatible HVGA display
 *
 * @addtogroup GDISP
 * @{
 */

#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H

#define SET_CS		palSetPad(GPIOD, 12);
#define CLR_CS		palClearPad(GPIOD, 12);
#define SET_RS		palSetPad(GPIOD, 13);
#define CLR_RS		palClearPad(GPIOD, 13);
#define SET_WR		palSetPad(GPIOD, 14);
#define CLR_WR		palClearPad(GPIOD, 14);
#define SET_RD		palSetPad(GPIOD, 15);
#define CLR_RD		palClearPad(GPIOD, 15);

/**
 * @brief   Initialise the board for the display.
 * @notes	This board definition uses GPIO and assumes exclusive access to these GPIO pins
 *
 * @notapi
 */
static inline void init_board(void) {
	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
	palSetPadMode(GPIOD, 12, PAL_MODE_OUTPUT_PUSHPULL);
	palSetPadMode(GPIOD, 13, PAL_MODE_OUTPUT_PUSHPULL);
	palSetPadMode(GPIOD, 14, PAL_MODE_OUTPUT_PUSHPULL);
	palSetPadMode(GPIOD, 15, PAL_MODE_OUTPUT_PUSHPULL);
	
	// Configure the pins to a well know state
	SET_RS;
	SET_RD;
	SET_WR;
	CLR_CS;
}


/**
 * @brief   Set or clear the lcd reset pin.
 *
 * @param[in] state		TRUE = lcd in reset, FALSE = normal operation
 * 
 * @notapi
 */
static inline void setpin_reset(bool_t state) {
	(void) state;
	/* Nothing to do here - reset pin tied to Vcc */
}

/**
 * @brief   Set the lcd back-light level.
 *
 * @param[in] percent		0 to 100%
 * 
 * @notapi
 */
static inline void set_backlight(uint8_t percent) {
	(void) percent;
	/* Nothing to do here - Backlight always on */
}

/**
 * @brief   Take exclusive control of the bus
 *
 * @notapi
 */
static inline void acquire_bus(void) {
	/* Nothing to do here since LCD is the only device on that bus */
}

/**
 * @brief   Release exclusive control of the bus
 *
 * @notapi
 */
static inline void release_bus(void) {
	/* Nothing to do here since LCD is the only device on that bus */
}

/**
 * @brief   Send data to the index register.
 *
 * @param[in] index		The index register to set
 *
 * @notapi
 */
static inline void write_index(uint16_t index) {
	palWritePort(GPIOE, index);
	CLR_RS; CLR_WR; SET_WR; SET_RS;
}

/**
 * @brief   Send data to the lcd.
 *
 * @param[in] data		The data to send
 * 
 * @notapi
 */
static inline void write_data(uint16_t data) {
	palWritePort(GPIOE, data);
	CLR_WR; SET_WR;
}

#if GDISP_HARDWARE_READPIXEL || GDISP_HARDWARE_SCROLL || defined(__DOXYGEN__)
/**
 * @brief   Read data from the lcd.
 *
 * @return	The data from the lcd
 * @note	The chip select may need to be asserted/de-asserted
 * 			around the actual spi read
 * 
 * @notapi
 */
static inline uint16_t read_data(void) {
	uint16_t	value;
	
	// change pin mode to digital input
	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);

	CLR_RD;
	value = palReadPort(GPIOE);
	value = palReadPort(GPIOE);
	SET_RD;

	// change pin mode back to digital output
	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
	
	return value;
}
#endif

#endif /* _GDISP_LLD_BOARD_H */
/** @} */