path: root/tests/utils.py

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from __future__ import absolute_import, division, print_function

import binascii
import collections
import re
from contextlib import contextmanager

from pyasn1.codec.der import encoder
from pyasn1.type import namedtype, univ

import pytest

import six

from cryptography.exceptions import UnsupportedAlgorithm

import cryptography_vectors


HashVector = collections.namedtuple("HashVector", ["message", "digest"])
KeyedHashVector = collections.namedtuple(
    "KeyedHashVector", ["message", "digest", "key"]
)


def select_backends(names, backend_list):
    if names is None:
        return backend_list
    split_names = [x.strip() for x in names.split(',')]
    selected_backends = []
    for backend in backend_list:
        if backend.name in split_names:
            selected_backends.append(backend)

    if len(selected_backends) > 0:
        return selected_backends
    else:
        raise ValueError(
            "No backend selected. Tried to select: {0}".format(split_names)
        )


def skip_if_empty(backend_list, required_interfaces):
    if not backend_list:
        pytest.skip(
            "No backends provided supply the interface: {0}".format(
                ", ".join(iface.__name__ for iface in required_interfaces)
            )
        )


def check_backend_support(item):
    supported = item.keywords.get("supported")
    if supported and "backend" in item.funcargs:
        if not supported.kwargs["only_if"](item.funcargs["backend"]):
            pytest.skip("{0} ({1})".format(
                supported.kwargs["skip_message"], item.funcargs["backend"]
            ))
    elif supported:
        raise ValueError("This mark is only available on methods that take a "
                         "backend")


@contextmanager
def raises_unsupported_algorithm(reason):
    with pytest.raises(UnsupportedAlgorithm) as exc_info:
        yield exc_info

    assert exc_info.value._reason is reason


class _DSSSigValue(univ.Sequence):
    componentType = namedtype.NamedTypes(
        namedtype.NamedType('r', univ.Integer()),
        namedtype.NamedType('s', univ.Integer())
    )


def der_encode_dsa_signature(r, s):
    sig = _DSSSigValue()
    sig.setComponentByName('r', r)
    sig.setComponentByName('s', s)
    return encoder.encode(sig)


def load_vectors_from_file(filename, loader):
    with cryptography_vectors.open_vector_file(filename) as vector_file:
        return loader(vector_file)


def load_nist_vectors(vector_data):
    test_data = None
    data = []

    for line in vector_data:
        line = line.strip()

        # Blank lines, comments, and section headers are ignored
        if not line or line.startswith("#") or (line.startswith("[")
                                                and line.endswith("]")):
            continue

        if line.strip() == "FAIL":
            test_data["fail"] = True
            continue

        # Build our data using a simple Key = Value format
        name, value = [c.strip() for c in line.split("=")]

        # Some tests (PBKDF2) contain \0, which should be interpreted as a
        # null character rather than literal.
        value = value.replace("\\0", "\0")

        # COUNT is a special token that indicates a new block of data
        if name.upper() == "COUNT":
            test_data = {}
            data.append(test_data)
            continue
        # For all other tokens we simply want the name, value stored in
        # the dictionary
        else:
            test_data[name.lower()] = value.encode("ascii")

    return data


def load_cryptrec_vectors(vector_data):
    cryptrec_list = []

    for line in vector_data:
        line = line.strip()

        # Blank lines and comments are ignored
        if not line or line.startswith("#"):
            continue

        if line.startswith("K"):
            key = line.split(" : ")[1].replace(" ", "").encode("ascii")
        elif line.startswith("P"):
            pt = line.split(" : ")[1].replace(" ", "").encode("ascii")
        elif line.startswith("C"):
            ct = line.split(" : ")[1].replace(" ", "").encode("ascii")
            # after a C is found the K+P+C tuple is complete
            # there are many P+C pairs for each K
            cryptrec_list.append({
                "key": key,
                "plaintext": pt,
                "ciphertext": ct
            })
        else:
            raise ValueError("Invalid line in file '{}'".format(line))
    return cryptrec_list


def load_hash_vectors(vector_data):
    vectors = []
    key = None
    msg = None
    md = None

    for line in vector_data:
        line = line.strip()

        if not line or line.startswith("#") or line.startswith("["):
            continue

        if line.startswith("Len"):
            length = int(line.split(" = ")[1])
        elif line.startswith("Key"):
            # HMAC vectors contain a key attribute. Hash vectors do not.
            key = line.split(" = ")[1].encode("ascii")
        elif line.startswith("Msg"):
            # In the NIST vectors they have chosen to represent an empty
            # string as hex 00, which is of course not actually an empty
            # string. So we parse the provided length and catch this edge case.
            msg = line.split(" = ")[1].encode("ascii") if length > 0 else b""
        elif line.startswith("MD"):
            md = line.split(" = ")[1]
            # after MD is found the Msg+MD (+ potential key) tuple is complete
            if key is not None:
                vectors.append(KeyedHashVector(msg, md, key))
                key = None
                msg = None
                md = None
            else:
                vectors.append(HashVector(msg, md))
                msg = None
                md = None
        else:
            raise ValueError("Unknown line in hash vector")
    return vectors


def load_pkcs1_vectors(vector_data):
    """
    Loads data out of RSA PKCS #1 vector files.
    """
    private_key_vector = None
    public_key_vector = None
    attr = None
    key = None
    example_vector = None
    examples = []
    vectors = []
    for line in vector_data:
        if (
            line.startswith("# PSS Example") or
            line.startswith("# OAEP Example") or
            line.startswith("# PKCS#1 v1.5")
        ):
            if example_vector:
                for key, value in six.iteritems(example_vector):
                    hex_str = "".join(value).replace(" ", "").encode("ascii")
                    example_vector[key] = hex_str
                examples.append(example_vector)

            attr = None
            example_vector = collections.defaultdict(list)

        if line.startswith("# Message"):
            attr = "message"
            continue
        elif line.startswith("# Salt"):
            attr = "salt"
            continue
        elif line.startswith("# Seed"):
            attr = "seed"
            continue
        elif line.startswith("# Signature"):
            attr = "signature"
            continue
        elif line.startswith("# Encryption"):
            attr = "encryption"
            continue
        elif (
            example_vector and
            line.startswith("# =============================================")
        ):
            for key, value in six.iteritems(example_vector):
                hex_str = "".join(value).replace(" ", "").encode("ascii")
                example_vector[key] = hex_str
            examples.append(example_vector)
            example_vector = None
            attr = None
        elif example_vector and line.startswith("#"):
            continue
        else:
            if attr is not None and example_vector is not None:
                example_vector[attr].append(line.strip())
                continue

        if (
            line.startswith("# Example") or
            line.startswith("# =============================================")
        ):
            if key:
                assert private_key_vector
                assert public_key_vector

                for key, value in six.iteritems(public_key_vector):
                    hex_str = "".join(value).replace(" ", "")
                    public_key_vector[key] = int(hex_str, 16)

                for key, value in six.iteritems(private_key_vector):
                    hex_str = "".join(value).replace(" ", "")
                    private_key_vector[key] = int(hex_str, 16)

                private_key_vector["examples"] = examples
                examples = []

                assert (
                    private_key_vector['public_exponent'] ==
                    public_key_vector['public_exponent']
                )

                assert (
                    private_key_vector['modulus'] ==
                    public_key_vector['modulus']
                )

                vectors.append(
                    (private_key_vector, public_key_vector)
                )

            public_key_vector = collections.defaultdict(list)
            private_key_vector = collections.defaultdict(list)
            key = None
            attr = None

        if private_key_vector is None or public_key_vector is None:
            continue

        if line.startswith("# Private key"):
            key = private_key_vector
        elif line.startswith("# Public key"):
            key = public_key_vector
        elif line.startswith("# Modulus:"):
            attr = "modulus"
        elif line.startswith("# Public exponent:"):
            attr = "public_exponent"
        elif line.startswith("# Exponent:"):
            if key is public_key_vector:
                attr = "public_exponent"
            else:
                assert key is private_key_vector
                attr = "private_exponent"
        elif line.startswith("# Prime 1:"):
            attr = "p"
        elif line.startswith("# Prime 2:"):
            attr = "q"
        elif line.startswith("# Prime exponent 1:"):
            attr = "dmp1"
        elif line.startswith("# Prime exponent 2:"):
            attr = "dmq1"
        elif line.startswith("# Coefficient:"):
            attr = "iqmp"
        elif line.startswith("#"):
            attr = None
        else:
            if key is not None and attr is not None:
                key[attr].append(line.strip())
    return vectors


def load_rsa_nist_vectors(vector_data):
    test_data = None
    p = None
    salt_length = None
    data = []

    for line in vector_data:
        line = line.strip()

        # Blank lines and section headers are ignored
        if not line or line.startswith("["):
            continue

        if line.startswith("# Salt len:"):
            salt_length = int(line.split(":")[1].strip())
            continue
        elif line.startswith("#"):
            continue

        # Build our data using a simple Key = Value format
        name, value = [c.strip() for c in line.split("=")]

        if name == "n":
            n = int(value, 16)
        elif name == "e" and p is None:
            e = int(value, 16)
        elif name == "p":
            p = int(value, 16)
        elif name == "q":
            q = int(value, 16)
        elif name == "SHAAlg":
            if p is None:
                test_data = {
                    "modulus": n,
                    "public_exponent": e,
                    "salt_length": salt_length,
                    "algorithm": value,
                    "fail": False
                }
            else:
                test_data = {
                    "modulus": n,
                    "p": p,
                    "q": q,
                    "algorithm": value
                }
                if salt_length is not None:
                    test_data["salt_length"] = salt_length
            data.append(test_data)
        elif name == "e" and p is not None:
            test_data["public_exponent"] = int(value, 16)
        elif name == "d":
            test_data["private_exponent"] = int(value, 16)
        elif name == "Result":
            test_data["fail"] = value.startswith("F")
        # For all other tokens we simply want the name, value stored in
        # the dictionary
        else:
            test_data[name.lower()] = value.encode("ascii")

    return data


def load_fips_dsa_key_pair_vectors(vector_data):
    """
    Loads data out of the FIPS DSA KeyPair vector files.
    """
    vectors = []
    # When reading_key_data is set to True it tells the loader to continue
    # constructing dictionaries. We set reading_key_data to False during the
    # blocks of the vectors of N=224 because we don't support it.
    reading_key_data = True
    for line in vector_data:
        line = line.strip()

        if not line or line.startswith("#"):
            continue
        elif line.startswith("[mod = L=1024"):
            continue
        elif line.startswith("[mod = L=2048, N=224"):
            reading_key_data = False
            continue
        elif line.startswith("[mod = L=2048, N=256"):
            reading_key_data = True
            continue
        elif line.startswith("[mod = L=3072"):
            continue

        if not reading_key_data:
            continue

        elif reading_key_data:
            if line.startswith("P"):
                vectors.append({'p': int(line.split("=")[1], 16)})
            elif line.startswith("Q"):
                vectors[-1]['q'] = int(line.split("=")[1], 16)
            elif line.startswith("G"):
                vectors[-1]['g'] = int(line.split("=")[1], 16)
            elif line.startswith("X") and 'x' not in vectors[-1]:
                vectors[-1]['x'] = int(line.split("=")[1], 16)
            elif line.startswith("X") and 'x' in vectors[-1]:
                vectors.append({'p': vectors[-1]['p'],
                                'q': vectors[-1]['q'],
                                'g': vectors[-1]['g'],
                                'x': int(line.split("=")[1], 16)
                                })
            elif line.startswith("Y"):
                vectors[-1]['y'] = int(line.split("=")[1], 16)

    return vectors


def load_fips_dsa_sig_vectors(vector_data):
    """
    Loads data out of the FIPS DSA SigVer vector files.
    """
    vectors = []
    sha_regex = re.compile(
        r"\[mod = L=...., N=..., SHA-(?P<sha>1|224|256|384|512)\]"
    )
    # When reading_key_data is set to True it tells the loader to continue
    # constructing dictionaries. We set reading_key_data to False during the
    # blocks of the vectors of N=224 because we don't support it.
    reading_key_data = True

    for line in vector_data:
        line = line.strip()

        if not line or line.startswith("#"):
            continue

        sha_match = sha_regex.match(line)
        if sha_match:
            digest_algorithm = "SHA-{0}".format(sha_match.group("sha"))

        if line.startswith("[mod = L=2048, N=224"):
            reading_key_data = False
            continue
        elif line.startswith("[mod = L=2048, N=256"):
            reading_key_data = True
            continue

        if not reading_key_data or line.startswith("[mod"):
            continue

        name, value = [c.strip() for c in line.split("=")]

        if name == "P":
            vectors.append({'p': int(value, 16),
                            'digest_algorithm': digest_algorithm})
        elif name == "Q":
            vectors[-1]['q'] = int(value, 16)
        elif name == "G":
            vectors[-1]['g'] = int(value, 16)
        elif name == "Msg" and 'msg' not in vectors[-1]:
            hexmsg = value.strip().encode("ascii")
            vectors[-1]['msg'] = binascii.unhexlify(hexmsg)
        elif name == "Msg" and 'msg' in vectors[-1]:
            hexmsg = value.strip().encode("ascii")
            vectors.append({'p': vectors[-1]['p'],
                            'q': vectors[-1]['q'],
                            'g': vectors[-1]['g'],
                            'digest_algorithm':
                            vectors[-1]['digest_algorithm'],
                            'msg': binascii.unhexlify(hexmsg)})
        elif name == "X":
            vectors[-1]['x'] = int(value, 16)
        elif name == "Y":
            vectors[-1]['y'] = int(value, 16)
        elif name == "R":
            vectors[-1]['r'] = int(value, 16)
        elif name == "S":
            vectors[-1]['s'] = int(value, 16)
        elif name == "Result":
            vectors[-1]['result'] = value.split("(")[0].strip()

    return vectors


# http://tools.ietf.org/html/rfc4492#appendix-A
_ECDSA_CURVE_NAMES = {
    "P-192": "secp192r1",
    "P-224": "secp224r1",
    "P-256": "secp256r1",
    "P-384": "secp384r1",
    "P-521": "secp521r1",

    "K-163": "sect163k1",
    "K-233": "sect233k1",
    "K-283": "sect283k1",
    "K-409": "sect409k1",
    "K-571": "sect571k1",

    "B-163": "sect163r2",
    "B-233": "sect233r1",
    "B-283": "sect283r1",
    "B-409": "sect409r1",
    "B-571": "sect571r1",
}


def load_fips_ecdsa_key_pair_vectors(vector_data):
    """
    Loads data out of the FIPS ECDSA KeyPair vector files.
    """
    vectors = []
    key_data = None
    for line in vector_data:
        line = line.strip()

        if not line or line.startswith("#"):
            continue

        if line[1:-1] in _ECDSA_CURVE_NAMES:
            curve_name = _ECDSA_CURVE_NAMES[line[1:-1]]

        elif line.startswith("d = "):
            if key_data is not None:
                vectors.append(key_data)

            key_data = {
                "curve": curve_name,
                "d": int(line.split("=")[1], 16)
            }

        elif key_data is not None:
            if line.startswith("Qx = "):
                key_data["x"] = int(line.split("=")[1], 16)
            elif line.startswith("Qy = "):
                key_data["y"] = int(line.split("=")[1], 16)

    if key_data is not None:
        vectors.append(key_data)

    return vectors


def load_fips_ecdsa_signing_vectors(vector_data):
    """
    Loads data out of the FIPS ECDSA SigGen vector files.
    """
    vectors = []

    curve_rx = re.compile(
        r"\[(?P<curve>[PKB]-[0-9]{3}),SHA-(?P<sha>1|224|256|384|512)\]"
    )

    data = None
    for line in vector_data:
        line = line.strip()

        if not line or line.startswith("#"):
            continue

        curve_match = curve_rx.match(line)
        if curve_match:
            curve_name = _ECDSA_CURVE_NAMES[curve_match.group("curve")]
            digest_name = "SHA-{0}".format(curve_match.group("sha"))

        elif line.startswith("Msg = "):
            if data is not None:
                vectors.append(data)

            hexmsg = line.split("=")[1].strip().encode("ascii")

            data = {
                "curve": curve_name,
                "digest_algorithm": digest_name,
                "message": binascii.unhexlify(hexmsg)
            }

        elif data is not None:
            if line.startswith("Qx = "):
                data["x"] = int(line.split("=")[1], 16)
            elif line.startswith("Qy = "):
                data["y"] = int(line.split("=")[1], 16)
            elif line.startswith("R = "):
                data["r"] = int(line.split("=")[1], 16)
            elif line.startswith("S = "):
                data["s"] = int(line.split("=")[1], 16)
            elif line.startswith("d = "):
                data["d"] = int(line.split("=")[1], 16)
            elif line.startswith("Result = "):
                data["fail"] = line.split("=")[1].strip()[0] == "F"

    if data is not None:
        vectors.append(data)
    return vectors


def load_kasvs_dh_vectors(vector_data):
    """
    Loads data out of the KASVS key exchange vector data
    """

    result_rx = re.compile(r"([FP]) \(([0-9]+) -")

    vectors = []
    data = {
        "fail_z": False,
        "fail_agree": False
    }

    for line in vector_data:
        line = line.strip()

        if not line or line.startswith("#"):
            continue

        if line.startswith("P = "):
            data["p"] = int(line.split("=")[1], 16)
        elif line.startswith("Q = "):
            data["q"] = int(line.split("=")[1], 16)
        elif line.startswith("G = "):
            data["g"] = int(line.split("=")[1], 16)
        elif line.startswith("Z = "):
            z_hex = line.split("=")[1].strip().encode("ascii")
            data["z"] = binascii.unhexlify(z_hex)
        elif line.startswith("XstatCAVS = "):
            data["x1"] = int(line.split("=")[1], 16)
        elif line.startswith("YstatCAVS = "):
            data["y1"] = int(line.split("=")[1], 16)
        elif line.startswith("XstatIUT = "):
            data["x2"] = int(line.split("=")[1], 16)
        elif line.startswith("YstatIUT = "):
            data["y2"] = int(line.split("=")[1], 16)
        elif line.startswith("Result = "):
            result_str = line.split("=")[1].strip()
            match = result_rx.match(result_str)

            if match.group(1) == "F":
                if int(match.group(2)) in (5, 10):
                    data["fail_z"] = True
                else:
                    data["fail_agree"] = True

            vectors.append(data)

            data = {
                "p": data["p"],
                "q": data["q"],
                "g": data["g"],
                "fail_z": False,
                "fail_agree": False
            }

    return vectors