diff options
author | Shiyu Sun <sshiyu@google.com> | 2020-03-19 14:37:57 +1100 |
---|---|---|
committer | Edward O'Callaghan <quasisec@chromium.org> | 2020-04-01 06:34:16 +0000 |
commit | 13a2ef6cbd0838a7965914dda3b4a63ff4ae5440 (patch) | |
tree | d1983d5cc5fc33a2a163c72a87f41d0a46ecfd57 /flashrom.c | |
parent | dc2c83bbc7dcf071af1a9ad80192fa1f80f09b14 (diff) | |
download | flashrom-13a2ef6cbd0838a7965914dda3b4a63ff4ae5440.tar.gz flashrom-13a2ef6cbd0838a7965914dda3b4a63ff4ae5440.tar.bz2 flashrom-13a2ef6cbd0838a7965914dda3b4a63ff4ae5440.zip |
lspcon_i2c_spi.c: Add SPI-master support for PS17{5,6}
This adds support for the Parade lspcon usb-c to HDMI protocol
translater part that is i2c-controlled. The support allows the
host to reach the SPI ROM that hangs off the part where it
stores its firmware.
Usage is as follows:
flashrom -p lspcon_i2c_spi:bus=X
where X is the bus number.
BUG=b:148746232
BRANCH=none
TEST=tested with following commands, read/write/erase works good.
flashrom -p lspcon_i2c_spi:bus=7 -r /tmp/foo;
flashrom -p lspcon_i2c_spi:bus=7 -E;
flashrom -p lspcon_i2c_spi:bus=7 -w /tmp/foo;
Change-Id: I039e683252cfaf1ffef8694a3e8081b1b6b944f7
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/39687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Diffstat (limited to 'flashrom.c')
-rw-r--r-- | flashrom.c | 12 |
1 files changed, 12 insertions, 0 deletions
@@ -389,6 +389,18 @@ const struct programmer_entry programmer_table[] = { }, #endif +#if CONFIG_LSPCON_I2C_SPI == 1 + { + .name = "lspcon_i2c_spi", + .type = OTHER, + .devs.note = "Device files /dev/i2c-*.\n", + .init = lspcon_i2c_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_USBBLASTER_SPI == 1 { .name = "usbblaster_spi", |