diff options
| author | Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 2009-12-13 22:28:00 +0000 |
|---|---|---|
| committer | Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 2009-12-13 22:28:00 +0000 |
| commit | 66ef4e5ff32b1d19281c9d6723b1acfe566f9763 (patch) | |
| tree | df65fe458cd52070208d9e46e23418a015b16696 /spi.c | |
| parent | a7e30503fad58008e739627dcb84348ded8ef572 (diff) | |
| download | flashrom-66ef4e5ff32b1d19281c9d6723b1acfe566f9763.tar.gz flashrom-66ef4e5ff32b1d19281c9d6723b1acfe566f9763.tar.bz2 flashrom-66ef4e5ff32b1d19281c9d6723b1acfe566f9763.zip | |
Internal (onboard) programming was the only feature which could not be disabled
Make various pieces of code conditional on support for internal
programming. Code shared between PCI device programmers and onboard
programming is now conditional as well.
It is now possible to build only with dummy support:
make CONFIG_INTERNAL=no CONFIG_NIC3COM=no CONFIG_SATASII=no
CONFIG_DRKAISER=no CONFIG_SERPROG=no CONFIG_FT2232SPI=no
This allows building for a specific use case only, and it also
facilitates porting to a new architecture because it is possible to
focus on highlevel code only.
Note: Either internal or dummy programmer needs to be compiled in due to
the current behaviour of always picking a default programmer if -p is
not specified. Picking an arbitrary external programmer as default
wouldn't make sense.
Build and runtime tested in all 1024 possible build combinations. The
only failures are by design as mentioned above.
Corresponding to flashrom svn r797.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Diffstat (limited to 'spi.c')
| -rw-r--r-- | spi.c | 6 |
1 files changed, 6 insertions, 0 deletions
@@ -40,6 +40,7 @@ const struct spi_programmer spi_programmer[] = { .write_256 = NULL, }, +#if INTERNAL_SUPPORT == 1 { /* SPI_CONTROLLER_ICH7 */ .command = ich_spi_send_command, .multicommand = ich_spi_send_multicommand, @@ -81,6 +82,7 @@ const struct spi_programmer spi_programmer[] = { .read = wbsio_spi_read, .write_256 = wbsio_spi_write_1, }, +#endif #if FT2232_SPI_SUPPORT == 1 { /* SPI_CONTROLLER_FT2232 */ @@ -308,11 +310,13 @@ int probe_spi_rdid4(struct flashchip *flash) { /* only some SPI chipsets support 4 bytes commands */ switch (spi_controller) { +#if INTERNAL_SUPPORT == 1 case SPI_CONTROLLER_ICH7: case SPI_CONTROLLER_ICH9: case SPI_CONTROLLER_VIA: case SPI_CONTROLLER_SB600: case SPI_CONTROLLER_WBSIO: +#endif #if FT2232_SPI_SUPPORT == 1 case SPI_CONTROLLER_FT2232: #endif @@ -1042,10 +1046,12 @@ int spi_aai_write(struct flashchip *flash, uint8_t *buf) int result; switch (spi_controller) { +#if INTERNAL_SUPPORT == 1 case SPI_CONTROLLER_WBSIO: fprintf(stderr, "%s: impossible with Winbond SPI masters," " degrading to byte program\n", __func__); return spi_chip_write_1(flash, buf); +#endif default: break; } |