diff options
Diffstat (limited to 'flashchips.c')
| -rw-r--r-- | flashchips.c | 8293 |
1 files changed, 4148 insertions, 4145 deletions
diff --git a/flashchips.c b/flashchips.c index 0906b1f7..4dd9d774 100644 --- a/flashchips.c +++ b/flashchips.c @@ -25,8 +25,11 @@ /** * List of supported flash chips. * - * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly - * alphabetically sorted. Within families keep them in order of density. + * Temporarily, this file is sorted alphabetically by vendor and name to + * assist with merging the Chromium fork of flashrom. + * + * The usual intention is that that this list is sorted by vendor, then chip + * family and chip density, which is useful for the output of 'flashrom -L'. */ const struct flashchip flashchips[] = { @@ -55,120 +58,120 @@ const struct flashchip flashchips[] = { { .vendor = "AMD", - .name = "Am29F010", + .name = "Am29F002(N)BB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AMD_AM29F010, - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_SHORT_RESET, + .model_id = AMD_AM29F002BB, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {16 * 1024, 8} }, + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, - .voltage = {4500, 5500}, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, { .vendor = "AMD", - .name = "Am29F010A/B", + .name = "Am29F002(N)BT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AMD_AM29F010, - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .model_id = AMD_AM29F002BT, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {16 * 1024, 8} }, + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, - .voltage = {4500, 5500}, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, { .vendor = "AMD", - .name = "Am29F002(N)BB", + .name = "Am29F010", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BB, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, + .model_id = AMD_AM29F010, + .total_size = 128, + .page_size = 16 * 1024, + .feature_bits = FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, + .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ + .voltage = {4500, 5500}, }, { .vendor = "AMD", - .name = "Am29F002(N)BT", + .name = "Am29F010A/B", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, + .model_id = AMD_AM29F010, + .total_size = 128, + .page_size = 16 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, + .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ + .voltage = {4500, 5500}, }, { @@ -616,32 +619,30 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L05PT", + .name = "A25L010", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PT, - .total_size = 64, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L010, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, + .eraseblocks = { { 4 * 1024, 32 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 2 } }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { { 128 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -650,32 +651,30 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L05PU", + .name = "A25L016", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PU, - .total_size = 64, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L016, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - }, + .eraseblocks = { { 4 * 1024, 512 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 32 } }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { { 2048 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -684,33 +683,30 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L10PT", + .name = "A25L020", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PT, - .total_size = 128, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L020, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {64 * 1024, 1}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, + .eraseblocks = { { 4 * 1024, 64 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 4 } }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { { 256 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -719,33 +715,69 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L10PU", + .name = "A25L032", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PU, - .total_size = 128, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L032, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L040", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L040, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 1}, - }, + .eraseblocks = { { 4 * 1024, 128 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 8 } }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { { 512 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -754,11 +786,11 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L20PT", + .name = "A25L05PT", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PT, - .total_size = 256, + .model_id = AMIC_A25L05PT, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -768,7 +800,6 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 3}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, @@ -776,7 +807,7 @@ const struct flashchip flashchips[] = { }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -789,11 +820,11 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L20PU", + .name = "A25L05PU", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PU, - .total_size = 256, + .model_id = AMIC_A25L05PU, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -807,11 +838,10 @@ const struct flashchip flashchips[] = { {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, - {64 * 1024, 3}, }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -822,36 +852,28 @@ const struct flashchip flashchips[] = { .voltage = {2700, 3600}, }, - /* The A25L40P{T,U} chips are distinguished by their - * erase block layouts, but without any distinction in RDID. - * This inexplicable quirk was verified by Rudolf Marek - * and discussed on the flashrom mailing list on 2010-07-12. - */ { .vendor = "AMIC", - .name = "A25L40PT", + .name = "A25L080", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PT, - .total_size = 512, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L080, + .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, + .eraseblocks = { { 4 * 1024, 256 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 16 } }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { { 1024 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, @@ -864,33 +886,33 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L40PU", + .name = "A25L10PT", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PU, - .total_size = 512, + .model_id = AMIC_A25L10PT, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, + {64 * 1024, 1}, {32 * 1024, 1}, - {64 * 1024, 7}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, + .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -899,14 +921,14 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L80P", + .name = "A25L10PU", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L80P, - .total_size = 1024, + .model_id = AMIC_A25L10PU, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = @@ -917,15 +939,15 @@ const struct flashchip flashchips[] = { {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, - {64 * 1024, 15}, + {64 * 1024, 1}, }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, + .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -1010,30 +1032,33 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L512", + .name = "A25L20PT", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L512, - .total_size = 64, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L20PT, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { { 4 * 1024, 16 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 1 } }, + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 64 * 1024, 1 } }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, + .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -1042,58 +1067,69 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L010", + .name = "A25L20PU", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L010, - .total_size = 128, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L20PU, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { { 4 * 1024, 32 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 2 } }, + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 128 * 1024, 1 } }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, + .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, + /* The A25L40P{T,U} chips are distinguished by their + * erase block layouts, but without any distinction in RDID. + * This inexplicable quirk was verified by Rudolf Marek + * and discussed on the flashrom mailing list on 2010-07-12. + */ { .vendor = "AMIC", - .name = "A25L020", + .name = "A25L40PT", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L020, - .total_size = 256, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L40PT, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { { 4 * 1024, 64 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 4 } }, + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 256 * 1024, 1 } }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -1106,26 +1142,29 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L040", + .name = "A25L40PU", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L040, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L40PU, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { { 4 * 1024, 128 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 8 } }, + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 512 * 1024, 1 } }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -1138,11 +1177,11 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L080", + .name = "A25L512", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L080, - .total_size = 1024, + .model_id = AMIC_A25L512, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -1151,13 +1190,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { { 4 * 1024, 256 } }, + .eraseblocks = { { 4 * 1024, 16 } }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { { 64 * 1024, 16 } }, + .eraseblocks = { { 64 * 1024, 1 } }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 1024 * 1024, 1 } }, + .eraseblocks = { { 64 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, @@ -1170,26 +1209,29 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L016", + .name = "A25L80P", .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L016, - .total_size = 2048, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L80P, + .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .tested = TEST_OK_PRE, + .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 15}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 2048 * 1024, 1 } }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -1202,15 +1244,16 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25L032", + .name = "A25LQ032/A25LQ32A", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L032, + .model_id = AMIC_A25LQ032, .total_size = 4096, .page_size = 256, + /* A25LQ32A supports SFDP */ /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -1281,46 +1324,6 @@ const struct flashchip flashchips[] = { { .vendor = "AMIC", - .name = "A25LQ032/A25LQ32A", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, - .total_size = 4096, - .page_size = 256, - /* A25LQ32A supports SFDP */ - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", .name = "A25LQ64", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, @@ -1944,11 +1947,13 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT25F512", + /* The A suffix indicates 33MHz instead of 20MHz clock rate. + * All other properties seem to be the same.*/ + .name = "AT25F1024(A)", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512, - .total_size = 64, + .model_id = ATMEL_AT25F1024, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -1957,10 +1962,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, @@ -1973,29 +1978,28 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT25F512A", + .name = "AT25F2048", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512A, - .total_size = 64, - .page_size = 128, + .model_id = ATMEL_AT25F2048, + .total_size = 256, + .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, - .printlock = spi_prettyprint_status_register_at25f512a, - /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ - .unlock = spi_disable_blockprotect_at25f512a, + .printlock = spi_prettyprint_status_register_at25f, + .unlock = spi_disable_blockprotect_at25f, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, @@ -2003,41 +2007,29 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT25F512B", + .name = "AT25F4096", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512B, - .total_size = 64, + .model_id = ATMEL_AT25F4096, + .total_size = 512, .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, - .printlock = spi_prettyprint_status_register_at25f512b, - .unlock = spi_disable_blockprotect_at25f512b, + .printlock = spi_prettyprint_status_register_at25f4096, + /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, @@ -2045,13 +2037,11 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - /* The A suffix indicates 33MHz instead of 20MHz clock rate. - * All other properties seem to be the same.*/ - .name = "AT25F1024(A)", + .name = "AT25F512", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F1024, - .total_size = 128, + .model_id = ATMEL_AT25F512, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -2060,10 +2050,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, @@ -2076,28 +2066,29 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT25F2048", + .name = "AT25F512A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F2048, - .total_size = 256, - .page_size = 256, + .model_id = ATMEL_AT25F512A, + .total_size = 64, + .page_size = 128, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, + .printlock = spi_prettyprint_status_register_at25f512a, + /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ + .unlock = spi_disable_blockprotect_at25f512a, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, @@ -2105,29 +2096,41 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT25F4096", + .name = "AT25F512B", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F4096, - .total_size = 512, + .model_id = ATMEL_AT25F512B, + .total_size = 64, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, { + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, - .printlock = spi_prettyprint_status_register_at25f4096, - /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ - .unlock = spi_disable_blockprotect_bp2_srwd, + .printlock = spi_prettyprint_status_register_at25f512b, + .unlock = spi_disable_blockprotect_at25f512b, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, @@ -2550,30 +2553,6 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT29C512", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C512, - .total_size = 64, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10000, /* 10mS, Enter=Exec */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", .name = "AT29C010A", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, @@ -2646,6 +2625,30 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", + .name = "AT29C512", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT29C512, + .total_size = 64, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10000, /* 10mS, Enter=Exec */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", .name = "AT45CS1282", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, @@ -3057,6 +3060,31 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", + .name = "AT49(H)F010", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F010, + .total_size = 128, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_at49f, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", .name = "AT49BV512", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, @@ -3145,31 +3173,6 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT49(H)F010", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F010, - .total_size = 128, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", .name = "AT49F020", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, @@ -3331,10 +3334,10 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT49LH00B4", + .name = "AT49LH004", .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH00B4, + .model_id = ATMEL_AT49LH004, .total_size = 512, .page_size = 0, /* unused */ .feature_bits = FEATURE_REGISTERMAP, @@ -3345,17 +3348,17 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7}, }, - .block_erase = NULL, /* TODO: Implement. */ + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {64 * 1024, 8}, }, - .block_erase = erase_block_82802ab, + .block_erase = NULL, /* TODO: Implement. */ }, }, .printlock = printlock_regspace2_block_eraser_0, @@ -3367,10 +3370,10 @@ const struct flashchip flashchips[] = { { .vendor = "Atmel", - .name = "AT49LH004", + .name = "AT49LH00B4", .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH004, + .model_id = ATMEL_AT49LH00B4, .total_size = 512, .page_size = 0, /* unused */ .feature_bits = FEATURE_REGISTERMAP, @@ -3381,17 +3384,17 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 7}, }, - .block_erase = erase_block_82802ab, + .block_erase = NULL, /* TODO: Implement. */ }, { .eraseblocks = { {64 * 1024, 8}, }, - .block_erase = NULL, /* TODO: Implement. */ + .block_erase = erase_block_82802ab, }, }, .printlock = printlock_regspace2_block_eraser_0, @@ -3402,30 +3405,6 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Catalyst", - .name = "CAT28F512", - .bustype = BUS_PARALLEL, - .manufacture_id = CATALYST_ID, - .model_id = CATALYST_CAT28F512, - .total_size = 64, - .page_size = 0, /* unused */ - .feature_bits = 0, - .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD }, - .probe = probe_jedec, /* FIXME! */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = NULL, /* TODO */ - }, - }, - .write = NULL, /* TODO */ - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { .vendor = "Bright", .name = "BM29F040", .bustype = BUS_PARALLEL, @@ -3453,6 +3432,30 @@ const struct flashchip flashchips[] = { }, { + .vendor = "Catalyst", + .name = "CAT28F512", + .bustype = BUS_PARALLEL, + .manufacture_id = CATALYST_ID, + .model_id = CATALYST_CAT28F512, + .total_size = 64, + .page_size = 0, /* unused */ + .feature_bits = 0, + .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD }, + .probe = probe_jedec, /* FIXME! */ + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = NULL, /* TODO */ + }, + }, + .write = NULL, /* TODO */ + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { .vendor = "ENE", .name = "KB9012 (EDI)", .bustype = BUS_SPI, @@ -3477,35 +3480,96 @@ const struct flashchip flashchips[] = { }, { - .vendor = "ESMT", - .name = "F49B002UA", - .bustype = BUS_PARALLEL, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F49B002UA, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, + .vendor = "ESI", + .name = "ES25P16", + .bustype = BUS_SPI, + .manufacture_id = EXCEL_ID_NOPREFIX, + .model_id = EXCEL_ES25P16, + .total_size = 2 * 1024, + .page_size = 256, + /* 256-byte parameter page separate from memory array: + * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, } }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast Read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "ESI", + .name = "ES25P40", + .bustype = BUS_SPI, + .manufacture_id = EXCEL_ID_NOPREFIX, + .model_id = EXCEL_ES25P40, + .total_size = 512, + .page_size = 256, + /* 256-byte parameter page separate from memory array: + * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast Read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "ESI", + .name = "ES25P80", + .bustype = BUS_SPI, + .manufacture_id = EXCEL_ID_NOPREFIX, + .model_id = EXCEL_ES25P80, + .total_size = 1024, + .page_size = 256, + /* 256-byte parameter page separate from memory array: + * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast Read (0x0B) supported */ + .voltage = {2700, 3600}, }, { @@ -3579,42 +3643,40 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Eon", - .name = "EN25B05", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + .vendor = "ESMT", + .name = "F49B002UA", + .bustype = BUS_PARALLEL, + .manufacture_id = ESMT_ID, + .model_id = ESMT_F49B002UA, + .total_size = 256, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, + {128 * 1024, 1}, + {96 * 1024, 1}, + {8 * 1024, 2}, {16 * 1024, 1}, - {32 * 1024, 1}, }, - .block_erase = spi_block_erase_d8, + .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, }, { .vendor = "Eon", - .name = "EN25B05T", + .name = "EN25B05", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B05, @@ -3628,10 +3690,10 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, }, .block_erase = spi_block_erase_d8, }, { @@ -3648,7 +3710,7 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25P05", + .name = "EN25B05T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B05, @@ -3662,7 +3724,11 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {32 * 1024, 2} }, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, @@ -3746,11 +3812,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25P10", + .name = "EN25B16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B10, - .total_size = 128, + .model_id = EON_EN25B16, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -3759,10 +3825,16 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 31}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -3775,11 +3847,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B20", + .name = "EN25B16T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B20, - .total_size = 256, + .model_id = EON_EN25B16, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -3789,15 +3861,15 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, + {64 * 1024, 31}, {32 * 1024, 1}, - {64 * 1024, 3} + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -3810,7 +3882,7 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B20T", + .name = "EN25B20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B20, @@ -3824,11 +3896,11 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 3} }, .block_erase = spi_block_erase_d8, }, { @@ -3845,7 +3917,7 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25P20", + .name = "EN25B20T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B20, @@ -3858,7 +3930,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, @@ -3874,13 +3952,14 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B40", + .name = "EN25B32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, + .model_id = EON_EN25B32, + .total_size = 4096, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -3892,11 +3971,11 @@ const struct flashchip flashchips[] = { {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, - {64 * 1024, 7} + {64 * 1024, 63}, }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -3909,13 +3988,14 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B40T", + .name = "EN25B32T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, + .model_id = EON_EN25B32, + .total_size = 4096, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -3923,7 +4003,7 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 7}, + {64 * 1024, 63}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, @@ -3931,7 +4011,7 @@ const struct flashchip flashchips[] = { }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -3944,7 +4024,7 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25P40", + .name = "EN25B40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B40, @@ -3957,7 +4037,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 7} + }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, @@ -3973,11 +4059,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B80", + .name = "EN25B40T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, + .model_id = EON_EN25B40, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -3987,15 +4073,15 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, + {64 * 1024, 7}, {32 * 1024, 1}, - {64 * 1024, 15} + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4008,13 +4094,14 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B80T", + .name = "EN25B64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, + .model_id = EON_EN25B64, + .total_size = 8192, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -4022,15 +4109,15 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 127}, }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4043,23 +4130,30 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25P80", + .name = "EN25B64T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, + .model_id = EON_EN25B64, + .total_size = 8192, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { + {64 * 1024, 127}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4072,11 +4166,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B16", + .name = "EN25B80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, + .model_id = EON_EN25B80, + .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -4090,11 +4184,11 @@ const struct flashchip flashchips[] = { {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, - {64 * 1024, 31}, + {64 * 1024, 15} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4107,11 +4201,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25B16T", + .name = "EN25B80T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, + .model_id = EON_EN25B80, + .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -4121,7 +4215,7 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 31}, + {64 * 1024, 15}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, @@ -4129,7 +4223,7 @@ const struct flashchip flashchips[] = { }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4142,244 +4236,265 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25P16", + .name = "EN25F05", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, + .model_id = EON_EN25F05, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25B32", + .name = "EN25F10", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, + .model_id = EON_EN25F10, + .total_size = 128, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 63}, - }, + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25B32T", + .name = "EN25F16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, + .model_id = EON_EN25F16, + .total_size = 2048, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {64 * 1024, 63}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25P32", /* Uniform version of EN25B32 */ + .name = "EN25F20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, + .model_id = EON_EN25F20, + .total_size = 256, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25B64", + .name = "EN25F32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, + .model_id = EON_EN25F32, + .total_size = 4096, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 127}, - }, + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25B64T", + .name = "EN25F40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, + .model_id = EON_EN25F40, + .total_size = 512, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { - {64 * 1024, 127}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, - } + }, }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25P64", + .name = "EN25F64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, + .model_id = EON_EN25F64, .total_size = 8192, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25F05", + .name = "EN25F80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F05, - .total_size = 64, + .model_id = EON_EN25F80, + .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -4388,19 +4503,16 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4413,11 +4525,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25F10", + .name = "EN25P05", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F10, - .total_size = 128, + .model_id = EON_EN25B05, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -4426,36 +4538,28 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { + {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25F20", + .name = "EN25P10", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F20, - .total_size = 256, + .model_id = EON_EN25B10, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -4464,266 +4568,222 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25F40", + .name = "EN25P16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F40, - .total_size = 512, + .model_id = EON_EN25B16, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, - }, + } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25F80", + .name = "EN25P20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F80, - .total_size = 1024, + .model_id = EON_EN25B20, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25F16", + .name = "EN25P32", /* Uniform version of EN25B32 */ .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F16, - .total_size = 2048, + .model_id = EON_EN25B32, + .total_size = 4096, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25F32", + .name = "EN25P40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F32, - .total_size = 4096, + .model_id = EON_EN25B40, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25F64", + .name = "EN25P64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F64, + .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25Q40", + .name = "EN25P80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q40, - .total_size = 512, + .model_id = EON_EN25B80, + .total_size = 1024, .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25Q80(A)", + .name = "EN25Q128", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q80, - .total_size = 1024, + .model_id = EON_EN25Q128, + .total_size = 16384, .page_size = 256, - /* OTP: 256B total; enter 0x3A */ + /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4731,7 +4791,6 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, }, { @@ -4814,6 +4873,42 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", + .name = "EN25Q40", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q40, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", .name = "EN25Q64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, @@ -4850,30 +4945,30 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25Q128", + .name = "EN25Q80(A)", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q128, - .total_size = 16384, + .model_id = EON_EN25Q80, + .total_size = 1024, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ + /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4881,36 +4976,37 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { .vendor = "Eon", - .name = "EN25QH16", + .name = "EN25QH128", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH16, - .total_size = 2048, + .model_id = EON_EN25QH128, + .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 2048, 1} }, + .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 2048, 1} }, + .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4923,11 +5019,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25QH32", + .name = "EN25QH16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH32, - .total_size = 4096, + .model_id = EON_EN25QH16, + .total_size = 2048, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ @@ -4939,16 +5035,16 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 4096, 1} }, + .eraseblocks = { {1024 * 2048, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 4096, 1} }, + .eraseblocks = { {1024 * 2048, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4961,11 +5057,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25QH64", + .name = "EN25QH32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH64, - .total_size = 8192, + .model_id = EON_EN25QH32, + .total_size = 4096, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ @@ -4977,16 +5073,16 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 8192 * 1024, 1} }, + .eraseblocks = { {1024 * 4096, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { { 8192 * 1024, 1} }, + .eraseblocks = { {1024 * 4096, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -4999,32 +5095,32 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25QH128", + .name = "EN25QH64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH128, - .total_size = 16384, + .model_id = EON_EN25QH64, + .total_size = 8192, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { { 16384 * 1024, 1} }, + .eraseblocks = { { 8192 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { { 16384 * 1024, 1} }, + .eraseblocks = { { 8192 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -5073,35 +5169,38 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25S20", + .name = "EN25S16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S20, - .total_size = 256, + .model_id = EON_EN25S16, + .total_size = 2048, .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, @@ -5109,30 +5208,30 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25S40", + .name = "EN25S20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S40, - .total_size = 512, + .model_id = EON_EN25S20, + .total_size = 256, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -5145,35 +5244,38 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25S80", + .name = "EN25S32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S80, - .total_size = 1024, + .model_id = EON_EN25S32, + .total_size = 4096, .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, @@ -5181,38 +5283,35 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25S16", + .name = "EN25S40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S16, - .total_size = 2048, + .model_id = EON_EN25S40, + .total_size = 512, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2048 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2048 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, @@ -5220,11 +5319,11 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25S32", + .name = "EN25S64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S32, - .total_size = 4096, + .model_id = EON_EN25S64, + .total_size = 8192, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, @@ -5234,19 +5333,16 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4096 * 1024, 1} }, + .eraseblocks = { {8192 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4096 * 1024, 1} }, + .eraseblocks = { {8192 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -5259,35 +5355,35 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN25S64", + .name = "EN25S80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S64, - .total_size = 8192, + .model_id = EON_EN25S80, + .total_size = 1024, .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8192 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8192 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, @@ -5295,34 +5391,6 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN29F010", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", .name = "EN29F002(A)(N)B", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, @@ -5387,59 +5455,30 @@ const struct flashchip flashchips[] = { { .vendor = "Eon", - .name = "EN29LV040(A)", + .name = "EN29F010", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, - .model_id = EON_EN29LV040, - .total_size = 512, - .page_size = 4 * 1024, - .tested = TEST_OK_PREW, + .model_id = EON_EN29F010, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PRE, .probe = probe_jedec, - .probe_timing = TIMING_ZERO, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R and 55R, others 2.7-3.6V */ - }, - - { - .vendor = "Eon", - .name = "EN29LV640B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29LV640B, - .total_size = 8192, - .page_size = 8192, - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_OK_PREW, - .probe = probe_en29lv640b, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_en29lv640b, - .read = read_memmapped, - .voltage = {2700, 3600}, + .voltage = {4500, 5500}, }, { @@ -5557,95 +5596,59 @@ const struct flashchip flashchips[] = { }, { - .vendor = "ESI", - .name = "ES25P40", - .bustype = BUS_SPI, - .manufacture_id = EXCEL_ID_NOPREFIX, - .model_id = EXCEL_ES25P40, + .vendor = "Eon", + .name = "EN29LV040(A)", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29LV040, .total_size = 512, - .page_size = 256, - /* 256-byte parameter page separate from memory array: - * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .page_size = 4 * 1024, + .tested = TEST_OK_PREW, + .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast Read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "ESI", - .name = "ES25P80", - .bustype = BUS_SPI, - .manufacture_id = EXCEL_ID_NOPREFIX, - .model_id = EXCEL_ES25P80, - .total_size = 1024, - .page_size = 256, - /* 256-byte parameter page separate from memory array: - * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { + .block_erase = erase_sector_jedec, + }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast Read (0x0B) supported */ - .voltage = {2700, 3600}, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R and 55R, others 2.7-3.6V */ }, { - .vendor = "ESI", - .name = "ES25P16", - .bustype = BUS_SPI, - .manufacture_id = EXCEL_ID_NOPREFIX, - .model_id = EXCEL_ES25P16, - .total_size = 2 * 1024, - .page_size = 256, - /* 256-byte parameter page separate from memory array: - * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, + .vendor = "Eon", + .name = "EN29LV640B", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29LV640B, + .total_size = 8192, + .page_size = 8192, + .feature_bits = FEATURE_ADDR_SHIFTED, + .tested = TEST_OK_PREW, + .probe = probe_en29lv640b, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127}, + }, + .block_erase = erase_block_jedec, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast Read (0x0B) supported */ + .write = write_en29lv640b, + .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -5844,33 +5847,33 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25LQ40", + .name = "GD25B128B/GD25Q128B", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ40, - .total_size = 512, + .model_id = GIGADEVICE_GD25Q128, + .total_size = 16384, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 16} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -5878,16 +5881,16 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1695, 1950}, + .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", - .name = "GD25LQ80", + .name = "GD25LQ128", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ80, - .total_size = 1024, + .model_id = GIGADEVICE_GD25LQ128, + .total_size = 16384, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, @@ -5897,19 +5900,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6000,33 +6003,33 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25LQ64(B)", + .name = "GD25LQ40", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ64, - .total_size = 8192, + .model_id = GIGADEVICE_GD25LQ40, + .total_size = 512, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 256} }, + .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6039,33 +6042,33 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25LQ128", + .name = "GD25LQ64(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ128, - .total_size = 16384, + .model_id = GIGADEVICE_GD25LQ64, + .total_size = 8192, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6078,29 +6081,33 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q512", + .name = "GD25LQ80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q512, - .total_size = 64, + .model_id = GIGADEVICE_GD25LQ80, + .total_size = 1024, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6108,7 +6115,7 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, + .voltage = {1695, 1950}, }, { @@ -6151,37 +6158,40 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q20(B)", + .name = "GD25Q128C", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q20, - .total_size = 256, + .model_id = GIGADEVICE_GD25Q128, + .total_size = 16384, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ + /* QPI: enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 8} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, + /* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */ .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .unlock = spi_disable_blockprotect_bp4_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, @@ -6189,32 +6199,33 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q40(B)", + .name = "GD25Q16(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q40, - .total_size = 512, + .model_id = GIGADEVICE_GD25Q16, + .total_size = 2048, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 16} }, + .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6227,33 +6238,32 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q80(B)", + .name = "GD25Q20(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q80, - .total_size = 1024, + .model_id = GIGADEVICE_GD25Q20, + .total_size = 256, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6266,13 +6276,13 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q16(B)", + .name = "GD25Q32(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q16, - .total_size = 2048, + .model_id = GIGADEVICE_GD25Q32, + .total_size = 4096, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -6280,19 +6290,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 64} }, + .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6305,33 +6315,32 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q32(B)", + .name = "GD25Q40(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q32, - .total_size = 4096, + .model_id = GIGADEVICE_GD25Q40, + .total_size = 512, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, + .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6344,33 +6353,29 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q64(B)", + .name = "GD25Q512", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q64, - .total_size = 8192, + .model_id = GIGADEVICE_GD25Q512, + .total_size = 64, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 256} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6383,11 +6388,11 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25B128B/GD25Q128B", + .name = "GD25Q64(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q128, - .total_size = 16384, + .model_id = GIGADEVICE_GD25Q64, + .total_size = 8192, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, @@ -6397,19 +6402,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -6422,40 +6427,38 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", - .name = "GD25Q128C", + .name = "GD25Q80(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q128, - .total_size = 16384, + .model_id = GIGADEVICE_GD25Q80, + .total_size = 1024, .page_size = 256, - /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ - /* QPI: enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - /* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */ .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, @@ -6502,6 +6505,46 @@ const struct flashchip flashchips[] = { { .vendor = "GigaDevice", + .name = "GD25VQ16C", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25VQ16C, + .total_size = 2 * 1024, + .page_size = 256, + /* Supports SFDP */ + /* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2300, 3600}, + }, + + { + .vendor = "GigaDevice", .name = "GD25VQ21B", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, @@ -6659,65 +6702,25 @@ const struct flashchip flashchips[] = { }, { - .vendor = "GigaDevice", - .name = "GD25VQ16C", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25VQ16C, - .total_size = 2 * 1024, - .page_size = 256, - /* Supports SFDP */ - /* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2300, 3600}, - }, - - { .vendor = "Hyundai", - .name = "HY29F002T", + .name = "HY29F002B", .bustype = BUS_PARALLEL, .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002T, + .model_id = HYUNDAI_HY29F002B, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_OK_PRE, + .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { @@ -6732,24 +6735,24 @@ const struct flashchip flashchips[] = { { .vendor = "Hyundai", - .name = "HY29F002B", + .name = "HY29F002T", .bustype = BUS_PARALLEL, .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002B, + .model_id = HYUNDAI_HY29F002T, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_UNTESTED, + .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { @@ -6790,6 +6793,428 @@ const struct flashchip flashchips[] = { }, { + .vendor = "ISSI", + .name = "IS25LP064", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25LP064, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total; read 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS25LP128", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25LP128, + .total_size = 16384, + .page_size = 256, + /* OTP: 1024B total; read 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS25LP256", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25LP256, + .total_size = 32768, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */ + /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_21, + }, { + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_20, + /* could also use spi_block_erase_d7 */ + }, { + .eraseblocks = { {32 * 1024, 1024} }, + .block_erase = spi_block_erase_5c, + }, { + .eraseblocks = { {32 * 1024, 1024} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_dc, + }, { + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {32 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS25WP032", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25WP032, + .total_size = 4096, + .page_size = 256, + /* OTP: 1024B total; read 0x48; write 0x42 */ + /* QPI enable 0x35, disable 0xF5 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "ISSI", + .name = "IS25WP064", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25WP064, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total; read 0x48; write 0x42 */ + /* QPI enable 0x35, disable 0xF5 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "ISSI", + .name = "IS25WP128", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25WP128, + .total_size = 16384, + .page_size = 256, + /* OTP: 1024B total; read 0x48; write 0x42 */ + /* QPI enable 0x35, disable 0xF5 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "ISSI", + .name = "IS25WP256", + .bustype = BUS_SPI, + .manufacture_id = ISSI_ID_SPI, + .model_id = ISSI_IS25WP256, + .total_size = 32768, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */ + /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_21, + }, { + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_20, + /* could also use spi_block_erase_d7 */ + }, { + .eraseblocks = { {32 * 1024, 1024} }, + .block_erase = spi_block_erase_5c, + }, { + .eraseblocks = { {32 * 1024, 1024} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_dc, + }, { + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {32 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "ISSI", + .name = "IS29GL064B", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL064B, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS29GL064H/L", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL064HL, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS29GL064T", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL064T, + .total_size = 8192, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 127}, + {8 * 1024, 8}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ISSI", + .name = "IS29GL128H/L", + .bustype = BUS_PARALLEL, + .manufacture_id = ISSI_ID, + .model_id = ISSI_PMC_IS29GL128HL, + .total_size = 16384, + .page_size = 128 * 1024, /* actual page size is 16 */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec_29gl, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { .vendor = "Intel", .name = "25F160S33B8", .bustype = BUS_SPI, @@ -7106,33 +7531,37 @@ const struct flashchip flashchips[] = { { .vendor = "Intel", - .name = "28F008S3/S5/SC", + .name = "28F004B5/BE/BV/BX-B", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004S3, + .model_id = INTEL_28F004B, .total_size = 512, - .page_size = 256, + .page_size = 128 * 1024, /* maximal block size */ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {96 * 1024, 1}, + {128 * 1024, 3}, + }, .block_erase = erase_block_82802ab, }, }, - .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, }, { .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-B", + .name = "28F004B5/BE/BV/BX-T", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004B, + .model_id = INTEL_28F004T, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .tested = TEST_UNTESTED, @@ -7142,10 +7571,10 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, {128 * 1024, 3}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, @@ -7156,27 +7585,23 @@ const struct flashchip flashchips[] = { { .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-T", + .name = "28F008S3/S5/SC", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004T, + .model_id = INTEL_28F004S3, .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ + .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { - .eraseblocks = { - {128 * 1024, 3}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, }, }, + .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, }, @@ -7288,425 +7713,19 @@ const struct flashchip flashchips[] = { }, { - .vendor = "ISSI", - .name = "IS25LP064", - .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, - .model_id = ISSI_IS25LP064, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total; read 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS25LP128", - .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, - .model_id = ISSI_IS25LP128, - .total_size = 16384, - .page_size = 256, - /* OTP: 1024B total; read 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS25LP256", - .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, - .model_id = ISSI_IS25LP256, - .total_size = 32768, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */ - /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 8192} }, - .block_erase = spi_block_erase_21, - }, { - .eraseblocks = { {4 * 1024, 8192} }, - .block_erase = spi_block_erase_20, - /* could also use spi_block_erase_d7 */ - }, { - .eraseblocks = { {32 * 1024, 1024} }, - .block_erase = spi_block_erase_5c, - }, { - .eraseblocks = { {32 * 1024, 1024} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 512} }, - .block_erase = spi_block_erase_dc, - }, { - .eraseblocks = { {64 * 1024, 512} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS25WP032", - .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, - .model_id = ISSI_IS25WP032, - .total_size = 4096, - .page_size = 256, - /* OTP: 1024B total; read 0x48; write 0x42 */ - /* QPI enable 0x35, disable 0xF5 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "ISSI", - .name = "IS25WP064", - .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, - .model_id = ISSI_IS25WP064, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total; read 0x48; write 0x42 */ - /* QPI enable 0x35, disable 0xF5 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "ISSI", - .name = "IS25WP128", + .vendor = "Macronix", + .name = "MX23L12854", .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, - .model_id = ISSI_IS25WP128, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L12854, .total_size = 16384, .page_size = 256, - /* OTP: 1024B total; read 0x48; write 0x42 */ - /* QPI enable 0x35, disable 0xF5 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "ISSI", - .name = "IS25WP256", - .bustype = BUS_SPI, - .manufacture_id = ISSI_ID_SPI, - .model_id = ISSI_IS25WP256, - .total_size = 32768, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */ - /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7, - .tested = TEST_OK_PREW, + .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 8192} }, - .block_erase = spi_block_erase_21, - }, { - .eraseblocks = { {4 * 1024, 8192} }, - .block_erase = spi_block_erase_20, - /* could also use spi_block_erase_d7 */ - }, { - .eraseblocks = { {32 * 1024, 1024} }, - .block_erase = spi_block_erase_5c, - }, { - .eraseblocks = { {32 * 1024, 1024} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 512} }, - .block_erase = spi_block_erase_dc, - }, { - .eraseblocks = { {64 * 1024, 512} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064B", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064B, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064T", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064T, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064HL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL128H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL128HL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, + .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, }, { @@ -7759,61 +7778,6 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX23L12854", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L12854, - .total_size = 16384, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L512(E)/MX25V512(C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L512, - .total_size = 64, - .page_size = 256, - /* MX25L512E supports SFDP */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ - }, - - { - .vendor = "Macronix", .name = "MX25L1005(C)/MX25L1006E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, @@ -7850,37 +7814,35 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L2005(C)/MX25L2006E", + .name = "MX25L12805D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L2005, - .total_size = 256, + .model_id = MACRONIX_MX25L12805D, + .total_size = 16384, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, - }, + } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, @@ -7888,37 +7850,39 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L4005(A/C)/MX25L4006E", + .name = "MX25L12835F/MX25L12845E/MX25L12865E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L4005, - .total_size = 512, + .model_id = MACRONIX_MX25L12805D, + .total_size = 16384, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, - }, + } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, + /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, @@ -7926,46 +7890,6 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L8005, - .total_size = 1024, - .page_size = 256, - /* MX25L8006E, MX25L8008E support SFDP */ - /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ - }, - - { - .vendor = "Macronix", .name = "MX25L1605", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, @@ -8147,11 +8071,11 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L3205(A)", + .name = "MX25L2005(C)/MX25L2006E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, + .model_id = MACRONIX_MX25L2005, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -8160,20 +8084,23 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ + .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ @@ -8182,21 +8109,69 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L3205D/MX25L3208D", + .name = "MX25L25635F", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L25635F, + .total_size = 32768, + .page_size = 256, + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_21, + }, { + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 1024} }, + .block_erase = spi_block_erase_5c, + }, { + .eraseblocks = { {32 * 1024, 1024} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_dc, + }, { + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {32 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3205(A)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, .total_size = 4096, .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, @@ -8209,16 +8184,16 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L3206E/MX25L3208E", + .name = "MX25L3205D/MX25L3208D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, @@ -8238,9 +8213,6 @@ const struct flashchip flashchips[] = { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { @@ -8248,7 +8220,7 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ @@ -8257,7 +8229,7 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L3273E", + .name = "MX25L3206E/MX25L3208E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, @@ -8274,12 +8246,12 @@ const struct flashchip flashchips[] = { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { @@ -8332,139 +8304,139 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L6405", + .name = "MX25L3273E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, .page_size = 256, - /* Has an additional 512B EEPROM sector */ - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, - } + }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */ + .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L6405D", + .name = "MX25L4005(A/C)/MX25L4006E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, + .model_id = MACRONIX_MX25L4005, + .total_size = 512, .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, - } + }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L6406E/MX25L6408E", + .name = "MX25L512(E)/MX25V512(C)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, + .model_id = MACRONIX_MX25L512, + .total_size = 64, .page_size = 256, - /* MX25L6406E supports SFDP */ - /* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* MX25L512E supports SFDP */ + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, - } + }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */ - .voltage = {2700, 3600}, + .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ + .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ }, { .vendor = "Macronix", - .name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E/MX25L6473F", + .name = "MX25L6405", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* Has an additional 512B EEPROM sector */ + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { @@ -8475,20 +8447,20 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L12805D", + .name = "MX25L6405D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L12805D, - .total_size = 16384, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, @@ -8498,35 +8470,36 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L12835F/MX25L12845E/MX25L12865E", + .name = "MX25L6406E/MX25L6408E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L12805D, - .total_size = 16384, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + /* MX25L6406E supports SFDP */ + /* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -8534,138 +8507,118 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25L25635F", + .name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E/MX25L6473F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L25635F, - .total_size = 32768, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, .page_size = 256, + /* supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 8192} }, - .block_erase = spi_block_erase_21, - }, { - .eraseblocks = { {4 * 1024, 8192} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 1024} }, - .block_erase = spi_block_erase_5c, - }, { - .eraseblocks = { {32 * 1024, 1024} }, + .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 512} }, - .block_erase = spi_block_erase_dc, - }, { - .eraseblocks = { {64 * 1024, 512} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX66L51235F", + .name = "MX25L6495F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX66L51235F, - .total_size = 65536, + .model_id = MACRONIX_MX25L6495F, + .total_size = 8192, .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, + /* OTP: 1024B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 16384} }, - .block_erase = spi_block_erase_21, - }, { - .eraseblocks = { {4 * 1024, 16384} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 2048} }, - .block_erase = spi_block_erase_5c, + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {32 * 1024, 2048} }, + .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 1024} }, - .block_erase = spi_block_erase_dc, - }, { - .eraseblocks = { {64 * 1024, 1024} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {64 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", - .name = "MX25U8032E", + .name = "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U8032E, + .model_id = MACRONIX_MX25L8005, .total_size = 1024, .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* MX25L8006E, MX25L8008E support SFDP */ + /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */ + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -8675,7 +8628,7 @@ const struct flashchip flashchips[] = { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, @@ -8686,68 +8639,63 @@ const struct flashchip flashchips[] = { }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, - } + }, }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ }, { .vendor = "Macronix", - .name = "MX25U1635E", + .name = "MX25R6435F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U1635E, - .total_size = 2048, + .model_id = MACRONIX_MX25R6435F, + .total_size = 8192, .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, + /* OTP: 1024B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, + .voltage = {1650, 3600}, }, { .vendor = "Macronix", - .name = "MX25U3235E/F", + .name = "MX25U12835F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U3235E, - .total_size = 4096, + .model_id = MACRONIX_MX25U12835E, + .total_size = 16384, .page_size = 256, - /* F model supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -8755,61 +8703,60 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, + .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", - .name = "MX25U6435E/F", + .name = "MX25U1635E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U6435E, - .total_size = 8192, + .model_id = MACRONIX_MX25U1635E, + .total_size = 2048, .page_size = 256, - /* F model supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 256} }, + .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -8823,33 +8770,42 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25U12835F", + .name = "MX25U25635F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U12835E, - .total_size = 16384, + .model_id = MACRONIX_MX25U25635F, + .total_size = 32768, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI | FEATURE_4BA, + .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_21, + }, { + .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {32 * 1024, 1024} }, + .block_erase = spi_block_erase_5c, + }, { + .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_dc, + }, { + .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -8863,49 +8819,42 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25U25635F", + .name = "MX25U3235E/F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U25635F, - .total_size = 32768, + .model_id = MACRONIX_MX25U3235E, + .total_size = 4096, .page_size = 256, + /* F model supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI | FEATURE_4BA, - .tested = TEST_OK_PR, + /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 8192} }, - .block_erase = spi_block_erase_21, - }, { - .eraseblocks = { {4 * 1024, 8192} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 1024} }, - .block_erase = spi_block_erase_5c, - }, { - .eraseblocks = { {32 * 1024, 1024} }, + .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 512} }, - .block_erase = spi_block_erase_dc, - }, { - .eraseblocks = { {64 * 1024, 512} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {32 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ + .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, @@ -8961,14 +8910,16 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX25L6495F", + .name = "MX25U6435E/F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6495F, + .model_id = MACRONIX_MX25U6435E, .total_size = 8192, .page_size = 256, - /* OTP: 1024B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* F model supports SFDP */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -8978,12 +8929,12 @@ const struct flashchip flashchips[] = { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { @@ -8991,21 +8942,23 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, } }, - .unlock = spi_disable_blockprotect, + /* TODO: security register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, + .voltage = {1650, 2000}, }, { .vendor = "Macronix", - .name = "MX25R6435F", + .name = "MX25U8032E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25R6435F, - .total_size = 8192, + .model_id = MACRONIX_MX25U8032E, + .total_size = 1024, .page_size = 256, - /* OTP: 1024B total; enter 0xB1, exit 0xC1 */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -9013,27 +8966,28 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 256} }, + .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, + /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 3600}, + .voltage = {1650, 2000}, }, { @@ -9259,11 +9213,11 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX29GL320EB", + .name = "MX29GL128F", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320EB, - .total_size = 4096, + .model_id = MACRONIX_MX29GL128F, + .total_size = 16384, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, @@ -9272,13 +9226,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63}, - }, + .eraseblocks = { {128 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -9289,10 +9240,10 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX29GL320ET", + .name = "MX29GL320EB", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320ET, + .model_id = MACRONIX_MX29GL320EB, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -9303,8 +9254,8 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 63}, {8 * 1024, 8}, + {64 * 1024, 63}, }, .block_erase = erase_sector_jedec, }, { @@ -9346,11 +9297,11 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX29GL640EB", + .name = "MX29GL320ET", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640EB, - .total_size = 8192, + .model_id = MACRONIX_MX29GL320ET, + .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, @@ -9360,12 +9311,12 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { + {64 * 1024, 63}, {8 * 1024, 8}, - {64 * 1024, 127}, }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -9376,10 +9327,10 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX29GL640ET", + .name = "MX29GL640EB", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640ET, + .model_id = MACRONIX_MX29GL640EB, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -9390,8 +9341,8 @@ const struct flashchip flashchips[] = { { { .eraseblocks = { - {64 * 1024, 127}, {8 * 1024, 8}, + {64 * 1024, 127}, }, .block_erase = erase_sector_jedec, }, { @@ -9433,11 +9384,11 @@ const struct flashchip flashchips[] = { { .vendor = "Macronix", - .name = "MX29GL128F", + .name = "MX29GL640ET", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL128F, - .total_size = 16384, + .model_id = MACRONIX_MX29GL640ET, + .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, @@ -9446,10 +9397,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {128 * 1024, 128} }, + .eraseblocks = { + {64 * 1024, 127}, + {8 * 1024, 8}, + }, .block_erase = erase_sector_jedec, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, @@ -9486,31 +9440,51 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Micron/Numonyx/ST", - .name = "M25P05-A", + .vendor = "Macronix", + .name = "MX66L51235F", .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P05A, - .total_size = 64, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX66L51235F, + .total_size = 65536, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {4 * 1024, 16384} }, + .block_erase = spi_block_erase_21, + }, { + .eraseblocks = { {4 * 1024, 16384} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2048} }, + .block_erase = spi_block_erase_5c, + }, { + .eraseblocks = { {32 * 1024, 2048} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1024} }, + .block_erase = spi_block_erase_dc, + }, { + .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {64 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, @@ -9550,11 +9524,11 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25P10-A", + .name = "M25P05-A", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25P10A, - .total_size = 128, + .model_id = ST_M25P05A, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -9563,10 +9537,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9608,70 +9582,70 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P20", + .vendor = "Micron/Numonyx/ST", + .name = "M25P10-A", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25P20, - .total_size = 256, + .model_id = ST_M25P10A, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", - .name = "M25P20-old", + .name = "M25P128", .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P20_RES, - .total_size = 256, + .manufacture_id = ST_ID, + .model_id = ST_M25P128, + .total_size = 16384, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, - .probe = probe_spi_res1, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P40", + .vendor = "Micron/Numonyx/ST", + .name = "M25P16", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25P40, - .total_size = 512, + .model_id = ST_M25P16, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -9680,10 +9654,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9695,40 +9669,70 @@ const struct flashchip flashchips[] = { }, { + .vendor = "Micron/Numonyx/ST", /* Numonyx */ + .name = "M25P20", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { .vendor = "Micron/Numonyx/ST", - .name = "M25P40-old", + .name = "M25P20-old", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P40_RES, - .total_size = 512, + .model_id = ST_M25P20_RES, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect_bp3_srwd, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", - .name = "M25P80", + .name = "M25P32", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25P80, - .total_size = 1024, + .model_id = ST_M25P32, + .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -9737,10 +9741,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9752,12 +9756,12 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Micron/Numonyx/ST", - .name = "M25P16", + .vendor = "Micron/Numonyx/ST", /* Numonyx */ + .name = "M25P40", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25P16, - .total_size = 2048, + .model_id = ST_M25P40, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -9766,10 +9770,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9782,23 +9786,23 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25P32", + .name = "M25P40-old", .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P32, - .total_size = 4096, + .manufacture_id = 0, /* Not used. */ + .model_id = ST_M25P40_RES, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, + .tested = TEST_UNTESTED, + .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9806,7 +9810,6 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, }, { @@ -9840,11 +9843,11 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25P128", + .name = "M25P80", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25P128, - .total_size = 16384, + .model_id = ST_M25P80, + .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -9853,10 +9856,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {256 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9901,11 +9904,11 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25PE20", + .name = "M25PE16", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PE20, - .total_size = 256, + .model_id = ST_M25PE16, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -9914,13 +9917,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9933,26 +9936,26 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25PE40", + .name = "M25PE20", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PE40, - .total_size = 512, + .model_id = ST_M25PE20, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9965,11 +9968,11 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25PE80", + .name = "M25PE40", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PE80, - .total_size = 1024, + .model_id = ST_M25PE40, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -9978,13 +9981,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -9997,26 +10000,26 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25PE16", + .name = "M25PE80", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PE16, - .total_size = 2048, + .model_id = ST_M25PE80, + .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -10029,13 +10032,13 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25PX80", + .name = "M25PX16", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PX80, - .total_size = 1024, + .model_id = ST_M25PX16, + .total_size = 2048, .page_size = 256, - /* OTP: 64B total; read 0x4B, write 0x42 */ + /* OTP: 64B total; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -10043,13 +10046,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { { 4 * 1024, 256 } }, + .eraseblocks = { { 4 * 1024, 512 } }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -10057,32 +10060,32 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, + .voltage = {2300, 3600}, }, { .vendor = "Micron/Numonyx/ST", - .name = "M25PX16", + .name = "M25PX32", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PX16, - .total_size = 2048, + .model_id = ST_M25PX32, + .total_size = 4096, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { { 4 * 1024, 512 } }, + .eraseblocks = { { 4 * 1024, 1024 } }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -10090,32 +10093,32 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2300, 3600}, + .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", - .name = "M25PX32", + .name = "M25PX64", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PX32, - .total_size = 4096, + .model_id = ST_M25PX64, + .total_size = 8192, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { { 4 * 1024, 1024 } }, + .eraseblocks = { { 4 * 1024, 2048 } }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -10128,13 +10131,13 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M25PX64", + .name = "M25PX80", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M25PX64, - .total_size = 8192, + .model_id = ST_M25PX80, + .total_size = 1024, .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ + /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -10142,13 +10145,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { { 4 * 1024, 2048 } }, + .eraseblocks = { { 4 * 1024, 256 } }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -10189,11 +10192,11 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M45PE20", + .name = "M45PE16", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M45PE20, - .total_size = 256, + .model_id = ST_M45PE16, + .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -10201,10 +10204,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {256, 1024} }, + .eraseblocks = { {256, 8192} }, .block_erase = spi_block_erase_db, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, } }, @@ -10217,11 +10220,11 @@ const struct flashchip flashchips[] = { { .vendor = "Micron/Numonyx/ST", - .name = "M45PE40", + .name = "M45PE20", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M45PE40, - .total_size = 512, + .model_id = ST_M45PE20, + .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -10229,27 +10232,27 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {256, 2048} }, + .eraseblocks = { {256, 1024} }, .block_erase = spi_block_erase_db, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write supported (similar to PP but allows 0->1 changes) */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", - .name = "M45PE80", + .name = "M45PE40", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M45PE80, - .total_size = 1024, + .model_id = ST_M45PE40, + .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -10257,27 +10260,27 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {256, 4096} }, + .eraseblocks = { {256, 2048} }, .block_erase = spi_block_erase_db, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .write = spi_chip_write_256, /* Page write supported (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", - .name = "M45PE16", + .name = "M45PE80", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_M45PE16, - .total_size = 2048, + .model_id = ST_M45PE80, + .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -10285,10 +10288,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {256, 8192} }, + .eraseblocks = { {256, 4096} }, .block_erase = spi_block_erase_db, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, } }, @@ -10852,6 +10855,41 @@ const struct flashchip flashchips[] = { { .vendor = "Nantronics", + .name = "N25S16", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", .name = "N25S20", .bustype = BUS_SPI, .manufacture_id = NANTRONICS_ID_NOPREFIX, @@ -10971,85 +11009,50 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Nantronics", - .name = "N25S16", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { .vendor = "PMC", - .name = "Pm25LD256C", + .name = "Pm25LD010(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD256C, - .total_size = 32, + .model_id = PMC_PM25LD010, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 8} }, + .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 8} }, + .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {32 * 1024, 1} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {32 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {32 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ }, { .vendor = "PMC", - .name = "Pm25LD512(C)", + .name = "Pm25LD020(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD512, - .total_size = 64, + .model_id = PMC_PM25LD020, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -11058,19 +11061,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -11078,16 +11081,16 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2300, 3600}, + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ }, { .vendor = "PMC", - .name = "Pm25LD010(C)", + .name = "Pm25LD040(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD010, - .total_size = 128, + .model_id = PMC_PM25LV040, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -11096,74 +11099,74 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 32} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 32} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ }, { .vendor = "PMC", - .name = "Pm25LD020(C)", + .name = "Pm25LD256C", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD020, - .total_size = 256, + .model_id = PMC_PM25LD256C, + .total_size = 32, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 8} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 8} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 1} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {32 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {32 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ + .voltage = {2700, 3600}, }, { .vendor = "PMC", - .name = "Pm25LD040(C)", + .name = "Pm25LD512(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV040, - .total_size = 512, + .model_id = PMC_PM25LD512, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -11172,36 +11175,36 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ + .voltage = {2300, 3600}, }, { .vendor = "PMC", - .name = "Pm25LQ020", + .name = "Pm25LQ016", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LQ020, - .total_size = 256, + .model_id = PMC_PM25LQ016, + .total_size = 2048, .page_size = 256, /* OTP: 256B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, @@ -11211,36 +11214,36 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "PMC", - .name = "Pm25LQ040", + .name = "Pm25LQ020", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LQ040, - .total_size = 512, + .model_id = PMC_PM25LQ020, + .total_size = 256, .page_size = 256, /* OTP: 256B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, @@ -11250,58 +11253,58 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "PMC", - .name = "Pm25LQ080", + .name = "Pm25LQ032C", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LQ080, - .total_size = 1024, + .model_id = PMC_PM25LQ032C, + .total_size = 4096, .page_size = 256, /* OTP: 64B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -11309,16 +11312,16 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2300, 3600}, + .voltage = {2700, 3600}, }, { .vendor = "PMC", - .name = "Pm25LQ016", + .name = "Pm25LQ040", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LQ016, - .total_size = 2048, + .model_id = PMC_PM25LQ040, + .total_size = 512, .page_size = 256, /* OTP: 256B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, @@ -11328,19 +11331,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2048 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2048 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -11353,33 +11356,33 @@ const struct flashchip flashchips[] = { { .vendor = "PMC", - .name = "Pm25LQ032C", + .name = "Pm25LQ080", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LQ032C, - .total_size = 4096, + .model_id = PMC_PM25LQ080, + .total_size = 1024, .page_size = 256, /* OTP: 64B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4096 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4096 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -11387,16 +11390,16 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, + .voltage = {2300, 3600}, }, { .vendor = "PMC", - .name = "Pm25LV512(A)", + .name = "Pm25LV010", .bustype = BUS_SPI, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM25LV512, - .total_size = 64, + .model_id = PMC_PM25LV010, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -11405,13 +11408,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -11424,15 +11427,15 @@ const struct flashchip flashchips[] = { { .vendor = "PMC", - .name = "Pm25LV010", + .name = "Pm25LV010A", .bustype = BUS_SPI, - .manufacture_id = PMC_ID_NOPREFIX, + .manufacture_id = PMC_ID, .model_id = PMC_PM25LV010, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, - .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -11456,30 +11459,36 @@ const struct flashchip flashchips[] = { { .vendor = "PMC", - .name = "Pm25LV010A", + .name = "Pm25LV016B", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV010, - .total_size = 128, + .model_id = PMC_PM25LV016B, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 32} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp1_srwd, + .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ @@ -11590,36 +11599,30 @@ const struct flashchip flashchips[] = { { .vendor = "PMC", - .name = "Pm25LV016B", + .name = "Pm25LV512(A)", .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV016B, - .total_size = 2048, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM25LV512, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, + .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ @@ -11628,24 +11631,24 @@ const struct flashchip flashchips[] = { { .vendor = "PMC", - .name = "Pm29F002T", + .name = "Pm29F002B", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002T, + .model_id = PMC_PM29F002B, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, {16 * 1024, 1}, + {8 * 1024, 2}, + {96 * 1024, 1}, + {128 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { @@ -11660,24 +11663,24 @@ const struct flashchip flashchips[] = { { .vendor = "PMC", - .name = "Pm29F002B", + .name = "Pm29F002T", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002B, + .model_id = PMC_PM29F002T, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, {128 * 1024, 1}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { @@ -11873,1138 +11876,6 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Sanyo", - .name = "LE25FW106", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW106, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {2 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ - .unlock = spi_disable_blockprotect_bp1_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW406A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW406A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU106B", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU106B, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - /* FIXME: Is this correct? - { - .eraseblocks = { {2 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - },*/ - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect_bp1_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU206", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU206, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect_bp1_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU206A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU206A, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU406B", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU406B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU406C/LE25U40CMC", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU406C, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual read (0x3B) and dual I/O (0xBB) supported */ - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW203A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW203A, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW403A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW403A, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 2 * 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW418A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW418A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW806", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW806, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW808", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW808, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {8 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LH28F008BJT-BTLZ1", - .bustype = BUS_PARALLEL, - .manufacture_id = SHARP_ID, - .model_id = SHARP_LH28F008BJ__PB, - .total_size = 1024, - .page_size = 64 * 1024, - .tested = TEST_OK_PREW, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 15} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_sector_49lfxxxc, - } - }, - .unlock = unlock_lh28f008bjt, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LHF00L04", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SHARP_ID, - .model_id = SHARP_LHF00L04, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {8 * 1024, 8} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { - {1024 * 1024, 1} - }, - .block_erase = NULL, /* 30 D0, only in A/A mux mode */ - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL004A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL004A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL008A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL008A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL016A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL016A, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL032A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL032A, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL064A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL064A, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL204K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL204, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL208K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL208, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL116K/S25FL216K", /* FIXME: separate them */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL216, - .total_size = 2048, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL132K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL132K, - .total_size = 4096, - .page_size = 256, - /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL164K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL164K, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL127S-64kB", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - /* FIXME: we should distinguish the configuration on probing time like we do for AT45DB chips */ - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of 32 so-called "parameter sectors" with - * opcode 0x20 which may be configured to be on top or bottom of the address - * space. Trying to access an address outside these 4kB blocks does have no - * effect on the memory contents, e.g. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL127S-256kB", /* uniform 256kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......0", /* uniform 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......1", /* uniform 256kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does have no - * effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs - .eraseblocks = { - {8 * 1024, 16}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL256S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL256, - .total_size = 32768, - .page_size = 256, - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_EAR7, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - .eraseblocks = { { 64 * 1024, 512} }, - .block_erase = spi_block_erase_dc, - }, { - .eraseblocks = { { 64 * 1024, 512} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 32768 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 32768 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - .wrea_override = 0x17, - }, - - { .vendor = "SST", .name = "SST25LF020A", .bustype = BUS_SPI, @@ -13102,11 +11973,11 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST25VF512(A)", + .name = "SST25VF010(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25VF512_REMS, - .total_size = 64, + .model_id = SST_SST25VF010_REMS, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, @@ -13115,64 +11986,64 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */ + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */ }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */ + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */ }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */ + .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */ .voltage = {2700, 3600}, }, { .vendor = "SST", - .name = "SST25VF010(A)", + .name = "SST25VF016B", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25VF010_REMS, - .total_size = 128, + .model_id = SST_SST25VF016B, + .total_size = 2048, .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, + .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_OK_PREW, - .probe = probe_spi_rems, + .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 32} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */ + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */ + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ + .printlock = spi_prettyprint_status_register_sst25vf016, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */ + .write = spi_aai_write, + .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -13248,6 +12119,44 @@ const struct flashchip flashchips[] = { { .vendor = "SST", + .name = "SST25VF032B", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF032B, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", .name = "SST25VF040", .bustype = BUS_SPI, .manufacture_id = SST_ID, @@ -13356,83 +12265,51 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST25WF020A", + .name = "SST25VF064C", .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, /* See flashchips.h */ - .model_id = SST_SST25WF020A, - .total_size = 256, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF064C, + .total_size = 8192, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_tb_bpl, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF040B", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, /* See flashchips.h */ - .model_id = SST_SST25WF040B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp2_tb_bpl, - .unlock = spi_disable_blockprotect_bp2_srwd, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */ - .voltage = {1650, 1950}, + .read = spi_chip_read, + .voltage = {2700, 3600}, }, { .vendor = "SST", - .name = "SST25WF080B", + .name = "SST25VF080B", .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, /* See flashchips.h */ - .model_id = SST_SST25WF080B, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF080B, .total_size = 1024, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -13442,6 +12319,9 @@ const struct flashchip flashchips[] = { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { @@ -13452,321 +12332,312 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp2_tb_bpl, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */ - .voltage = {1650, 1950}, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, + .voltage = {2700, 3600}, }, { .vendor = "SST", - .name = "SST25VF080B", + .name = "SST25VF512(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25VF080B, - .total_size = 1024, + .model_id = SST_SST25VF512_REMS, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, + .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */ }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */ }, }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */ .voltage = {2700, 3600}, }, { .vendor = "SST", - .name = "SST25VF016B", + .name = "SST25WF010", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25VF016B, - .total_size = 2048, + .model_id = SST_SST25WF010, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 64} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 128, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 128, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25vf016, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, }, { .vendor = "SST", - .name = "SST25VF032B", + .name = "SST25WF020", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25VF032B, - .total_size = 4096, + .model_id = SST_SST25WF020, + .total_size = 256, .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, + .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 256, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 256, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, }, { .vendor = "SST", - .name = "SST25VF064C", + .name = "SST25WF020A", .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF064C, - .total_size = 8192, + .manufacture_id = SANYO_ID, /* See flashchips.h */ + .model_id = SST_SST25WF020A, + .total_size = 256, .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, }, { .vendor = "SST", - .name = "SST26VF016B(A)", + .name = "SST25WF040", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST26VF016B, - .total_size = 2048, + .model_id = SST_SST25WF040, + .total_size = 512, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { - {8 * 1024, 4}, - {32 * 1024, 1}, - {64 * 1024, 30}, - {32 * 1024, 1}, - {8 * 1024, 4}, - }, + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 512, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 512, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect_sst26_global_unprotect, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, }, { .vendor = "SST", - .name = "SST26VF032B(A)", + .name = "SST25WF040B", .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST26VF032B, - .total_size = 4096, + .manufacture_id = SANYO_ID, /* See flashchips.h */ + .model_id = SST_SST25WF040B, + .total_size = 512, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { - {8 * 1024, 4}, - {32 * 1024, 1}, - {64 * 1024, 62}, - {32 * 1024, 1}, - {8 * 1024, 4}, - }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect_sst26_global_unprotect, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */ + .voltage = {1650, 1950}, }, { .vendor = "SST", - .name = "SST26VF064B(A)", + .name = "SST25WF080", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST26VF064B, - .total_size = 8192, + .model_id = SST_SST25WF080, + .total_size = 1024, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { - {8 * 1024, 4}, - {32 * 1024, 1}, - {64 * 1024, 126}, - {32 * 1024, 1}, - {8 * 1024, 4}, - }, + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect_sst26_global_unprotect, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, + .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, }, { .vendor = "SST", - .name = "SST25WF512", + .name = "SST25WF080B", .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF512, - .total_size = 64, + .manufacture_id = SANYO_ID, /* See flashchips.h */ + .model_id = SST_SST25WF080B, + .total_size = 1024, .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 64, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 64, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", - .name = "SST25WF010", + .name = "SST25WF512", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25WF010, - .total_size = 128, + .model_id = SST_SST25WF512, + .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, @@ -13775,16 +12646,16 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 32} }, + .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 4} }, + .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {1024 * 128, 1} }, + .eraseblocks = { {1024 * 64, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 128, 1} }, + .eraseblocks = { {1024 * 64, 1} }, .block_erase = spi_block_erase_c7, }, }, @@ -13797,116 +12668,116 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST25WF020", + .name = "SST26VF016B(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25WF020, - .total_size = 256, + .model_id = SST_SST26VF016B, + .total_size = 2048, .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { + {8 * 1024, 4}, + {32 * 1024, 1}, + {64 * 1024, 30}, + {32 * 1024, 1}, + {8 * 1024, 4}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 256, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 256, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect_sst26_global_unprotect, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, }, { .vendor = "SST", - .name = "SST25WF040", + .name = "SST26VF032B(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25WF040, - .total_size = 512, + .model_id = SST_SST26VF032B, + .total_size = 4096, .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { + {8 * 1024, 4}, + {32 * 1024, 1}, + {64 * 1024, 62}, + {32 * 1024, 1}, + {8 * 1024, 4}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 512, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 512, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect_sst26_global_unprotect, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, }, { .vendor = "SST", - .name = "SST25WF080", + .name = "SST26VF064B(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, - .model_id = SST_SST25WF080, - .total_size = 1024, + .model_id = SST_SST26VF064B, + .total_size = 8192, .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { + {8 * 1024, 4}, + {32 * 1024, 1}, + {64 * 1024, 126}, + {32 * 1024, 1}, + {8 * 1024, 4}, + }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect_sst26_global_unprotect, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, }, { @@ -13963,50 +12834,50 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST29LE010", + .name = "SST29EE020A", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_SST29LE010, - .total_size = 128, + .model_id = SST_SST29EE020A, + .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, - .voltage = {3000, 3600}, + .voltage = {4500, 5500}, }, { .vendor = "SST", - .name = "SST29EE020A", + .name = "SST29LE010", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_SST29EE020A, - .total_size = 256, + .model_id = SST_SST29LE010, + .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, - .voltage = {4500, 5500}, + .voltage = {3000, 3600}, }, { @@ -14035,33 +12906,6 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST39SF512", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", .name = "SST39SF010A", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, @@ -14143,10 +12987,10 @@ const struct flashchip flashchips[] = { { .vendor = "SST", - .name = "SST39VF512", + .name = "SST39SF512", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, - .model_id = SST_SST39VF512, + .model_id = SST_SST39SF512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, @@ -14165,7 +13009,7 @@ const struct flashchip flashchips[] = { }, .write = write_jedec_1, .read = read_memmapped, - .voltage = {2700, 3600}, + .voltage = {4500, 5500}, }, { @@ -14281,6 +13125,33 @@ const struct flashchip flashchips[] = { { .vendor = "SST", + .name = "SST39VF512", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39VF512, + .total_size = 64, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", .name = "SST49LF002A/B", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = SST_ID, @@ -15233,6 +14104,1138 @@ const struct flashchip flashchips[] = { }, { + .vendor = "Sanyo", + .name = "LE25FU106B", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FU106B, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + /* FIXME: Is this correct? + { + .eraseblocks = { {2 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + },*/ + { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect_bp1_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FU206", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FU206, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect_bp1_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FU206A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FU206A, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FU406B", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FU406B, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FU406C/LE25U40CMC", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FU406C, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual read (0x3B) and dual I/O (0xBB) supported */ + .voltage = {2300, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW106", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW106, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {2 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ + .unlock = spi_disable_blockprotect_bp1_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW203A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW203A, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW403A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW403A, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 2 * 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW406A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW406A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW418A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW418A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW806", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW806, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW808", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW808, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {8 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sharp", + .name = "LH28F008BJT-BTLZ1", + .bustype = BUS_PARALLEL, + .manufacture_id = SHARP_ID, + .model_id = SHARP_LH28F008BJ__PB, + .total_size = 1024, + .page_size = 64 * 1024, + .tested = TEST_OK_PREW, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 15} + }, + .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_sector_49lfxxxc, + } + }, + .unlock = unlock_lh28f008bjt, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sharp", + .name = "LHF00L04", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = SHARP_ID, + .model_id = SHARP_LHF00L04, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 15}, + {8 * 1024, 8} + }, + .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { + {1024 * 1024, 1} + }, + .block_erase = NULL, /* 30 D0, only in A/A mux mode */ + }, + }, + .unlock = unlock_regspace2_uniform_64k, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL004A", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL004A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL008A", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL008A, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PRE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL016A", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL016A, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL032A/P", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL032A, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL064A/P", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL064A, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL116K/S25FL216K", /* FIXME: separate them */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL216, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL127S-256kB", /* uniform 256kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 512, + /* supports 4B addressing */ + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL127S-64kB", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + /* supports 4B addressing */ + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + /* FIXME: we should distinguish the configuration on probing time like we do for AT45DB chips */ + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of 32 so-called "parameter sectors" with + * opcode 0x20 which may be configured to be on top or bottom of the address + * space. Trying to access an address outside these 4kB blocks does have no + * effect on the memory contents, e.g. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_20, + }, { */ + .eraseblocks = { { 64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128P......0", /* uniform 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128P......1", /* uniform 256kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + /* supports 4B addressing */ + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 32 so-called "parameter sectors" with + * opcode 0x20. Trying to access an address outside these 4kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_20, + }, { */ + .eraseblocks = { { 64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128S......1", /* uniform 256 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 512, + /* supports 4B addressing */ + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with + * opcode 0x20. Trying to access an address outside these 4kB blocks does have no + * effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_20, + }, { */ + /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs + .eraseblocks = { + {8 * 1024, 16}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { { 64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL129P......1", /* uniform 256 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL132K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL132K, + .total_size = 4096, + .page_size = 256, + /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL164K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL164K, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL204K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL204, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL208K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL208, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL256S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL256, + .total_size = 32768, + .page_size = 256, + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_EAR7, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 32 so-called "parameter sectors" with + * opcode 0x20. Trying to access an address outside these 4kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {4 * 1024, 32}, + {64 * 1024, 254} // inaccessible + }, + .block_erase = spi_block_erase_20, + }, { */ + .eraseblocks = { { 64 * 1024, 512} }, + .block_erase = spi_block_erase_dc, + }, { + .eraseblocks = { { 64 * 1024, 512} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 32768 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 32768 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + .wrea_override = 0x17, + }, + + { .vendor = "SyncMOS/MoselVitelic", .name = "{F,S,V}29C51001B", .bustype = BUS_PARALLEL, @@ -15511,53 +15514,122 @@ const struct flashchip flashchips[] = { }, { + .vendor = "Unknown", + .name = "SFDP-capable chip", + .bustype = BUS_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = SFDP_DEVICE_ID, + .total_size = 0, /* set by probing function */ + .page_size = 0, /* set by probing function */ + .feature_bits = 0, /* set by probing function */ + /* We present our own "report this" text hence we do not */ + /* want the default "This flash part has status UNTESTED..." */ + /* text to be printed. */ + .tested = TEST_OK_PREW, + .probe = probe_spi_sfdp, + .block_erasers = {}, /* set by probing function */ + .unlock = spi_disable_blockprotect, /* is this safe? */ + .write = NULL, /* set by probing function */ + .read = spi_chip_read, + /* FIXME: some vendor extensions define this */ + .voltage = {0}, + }, + + { .vendor = "Winbond", - .name = "W25Q40.V", + .name = "W25P16", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40_V, - .total_size = 512, + .model_id = WINBOND_NEX_W25P16, + .total_size = 2048, .page_size = 256, - /* supports SFDP */ - /* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25P32", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25P32, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Winbond", - .name = "W25Q80.V", + .name = "W25P80", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80_V, + .model_id = WINBOND_NEX_W25P80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q128.V", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q128_V, + .total_size = 16384, + .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, @@ -15567,19 +15639,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -15592,38 +15664,35 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q16.V", + .name = "W25Q128.V..M", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_V, - .total_size = 2048, + .model_id = WINBOND_NEX_W25Q128_V_M, + .total_size = 16384, .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 64} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -15632,34 +15701,34 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q32.V", + .name = "W25Q128.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_V, - .total_size = 4096, + .model_id = WINBOND_NEX_W25Q128_W, + .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, + .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -15667,16 +15736,16 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, + .voltage = {1650, 1950}, }, { .vendor = "Winbond", - .name = "W25Q64.V", + .name = "W25Q16.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_V, - .total_size = 8192, + .model_id = WINBOND_NEX_W25Q16_V, + .total_size = 2048, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ @@ -15687,19 +15756,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 256} }, + .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -15712,34 +15781,34 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q128.V", + .name = "W25Q16.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128_V, - .total_size = 16384, + .model_id = WINBOND_NEX_W25Q16_W, + .total_size = 2048, .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -15747,44 +15816,46 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", - .name = "W25Q128.V..M", + .name = "W25Q20.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128_V_M, - .total_size = 16384, + .model_id = WINBOND_NEX_W25Q20_W, + .total_size = 256, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { @@ -15878,33 +15949,34 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q20.W", + .name = "W25Q32.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q20_W, - .total_size = 256, + .model_id = WINBOND_NEX_W25Q32_V, + .total_size = 4096, .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 8} }, + .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -15912,38 +15984,39 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, }, { .vendor = "Winbond", - .name = "W25Q40BW", + .name = "W25Q32.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40BW, - .total_size = 512, + .model_id = WINBOND_NEX_W25Q32_W, + .total_size = 4096, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 16} }, + .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -15956,13 +16029,14 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q80BW", + .name = "W25Q40.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80BW, - .total_size = 1024, + .model_id = WINBOND_NEX_W25Q40_V, + .total_size = 512, .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* supports SFDP */ + /* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -15970,40 +16044,40 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, }, { .vendor = "Winbond", - .name = "W25Q40EW", + .name = "W25Q40BW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40EW, + .model_id = WINBOND_NEX_W25Q40BW, .total_size = 512, .page_size = 256, - /* OTP: 3*256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -16029,38 +16103,38 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {1650, 1950}, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", - .name = "W25Q80EW", + .name = "W25Q40EW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80EW, - .total_size = 1024, + .model_id = WINBOND_NEX_W25Q40EW, + .total_size = 512, .page_size = 256, /* OTP: 3*256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16073,34 +16147,34 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q16.W", + .name = "W25Q64.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_W, - .total_size = 2048, + .model_id = WINBOND_NEX_W25Q64_V, + .total_size = 8192, .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 64} }, + .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16108,16 +16182,16 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, }, { .vendor = "Winbond", - .name = "W25Q32.W", + .name = "W25Q64.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_W, - .total_size = 4096, + .model_id = WINBOND_NEX_W25Q64_W, + .total_size = 8192, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ /* QPI enable 0x38, disable 0xFF */ @@ -16128,19 +16202,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, + .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16153,34 +16227,34 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25Q64.W", + .name = "W25Q80.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_W, - .total_size = 8192, + .model_id = WINBOND_NEX_W25Q80_V, + .total_size = 1024, .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 2048} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 256} }, + .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16188,39 +16262,38 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, }, { .vendor = "Winbond", - .name = "W25Q128.W", + .name = "W25Q80BW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128_W, - .total_size = 16384, + .model_id = WINBOND_NEX_W25Q80BW, + .total_size = 1024, .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 4096} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 512} }, + .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 256} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, + .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16228,31 +16301,38 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {1650, 1950}, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", - .name = "W25X10", + .name = "W25Q80EW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X10, - .total_size = 128, + .model_id = WINBOND_NEX_W25Q80EW, + .total_size = 1024, .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, + /* OTP: 3*256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 32} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 2} }, + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16260,16 +16340,16 @@ const struct flashchip flashchips[] = { .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {2700, 3600}, + .voltage = {1650, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", - .name = "W25X20", + .name = "W25X10", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X20, - .total_size = 256, + .model_id = WINBOND_NEX_W25X10, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -16278,13 +16358,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 64} }, + .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 4} }, + .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16297,11 +16377,11 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25X40", + .name = "W25X16", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X40, - .total_size = 512, + .model_id = WINBOND_NEX_W25X16, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -16310,13 +16390,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 128} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 8} }, + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16329,11 +16415,11 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25X80", + .name = "W25X20", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X80, - .total_size = 1024, + .model_id = WINBOND_NEX_W25X20, + .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -16342,13 +16428,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 256} }, + .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {64 * 1024, 16} }, + .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {1024 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16361,11 +16447,11 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25X16", + .name = "W25X32", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X16, - .total_size = 2048, + .model_id = WINBOND_NEX_W25X32, + .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -16374,19 +16460,19 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 64} }, + .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16399,11 +16485,11 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25X32", + .name = "W25X40", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X32, - .total_size = 4096, + .model_id = WINBOND_NEX_W25X40, + .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, @@ -16412,19 +16498,13 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, @@ -16475,19 +16555,22 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W25P80", + .name = "W25X80", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25P80, + .model_id = WINBOND_NEX_W25X80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { @@ -16498,90 +16581,32 @@ const struct flashchip flashchips[] = { .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25P16", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25P16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25P32", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25P32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ + .read = spi_chip_read, .voltage = {2700, 3600}, }, + /* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ { .vendor = "Winbond", - .name = "W29C512A/W29EE512", + .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C512A, - .total_size = 64, + .model_id = WINBOND_W29C010, + .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = 10, + .probe_timing = 10, /* used datasheet for the W29C011A */ .block_erasers = { { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, - .voltage = {4500, 5500}, }, { @@ -16607,46 +16632,46 @@ const struct flashchip flashchips[] = { .read = read_memmapped, }, - /* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ { .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", + .name = "W29C020(C)/W29C022", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, + .model_id = WINBOND_W29C020, + .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = 10, /* used datasheet for the W29C011A */ + .probe_timing = 10, .block_erasers = { { - .eraseblocks = { {128 * 1024, 1} }, + .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, + .voltage = {4500, 5500}, }, { .vendor = "Winbond", - .name = "W29C020(C)/W29C022", + .name = "W29C040/P", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C020, - .total_size = 256, - .page_size = 128, + .model_id = WINBOND_W29C040, + .total_size = 512, + .page_size = 256, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { - .eraseblocks = { {256 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -16657,20 +16682,20 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W29C040/P", + .name = "W29C512A/W29EE512", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C040, - .total_size = 512, - .page_size = 256, + .model_id = WINBOND_W29C512A, + .total_size = 64, + .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { - .eraseblocks = { {512 * 1024, 1} }, + .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, @@ -16711,10 +16736,10 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W29GL032CT", + .name = "W29GL032CH/L", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CT, + .model_id = WINBOND_W29GL032CHL, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -16724,10 +16749,7 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { - {64 * 1024, 63}, - {8 * 1024, 8}, - }, + .eraseblocks = { {64 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, @@ -16741,10 +16763,10 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W29GL032CH/L", + .name = "W29GL032CT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CHL, + .model_id = WINBOND_W29GL032CT, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -16754,7 +16776,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { + {64 * 1024, 63}, + {8 * 1024, 8}, + }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, @@ -16798,10 +16823,10 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W29GL064CT", + .name = "W29GL064CH/L", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CT, + .model_id = WINBOND_W29GL064CHL, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -16811,10 +16836,7 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, + .eraseblocks = { {64 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, @@ -16828,10 +16850,10 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", - .name = "W29GL064CH/L", + .name = "W29GL064CT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CHL, + .model_id = WINBOND_W29GL064CT, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, @@ -16841,7 +16863,10 @@ const struct flashchip flashchips[] = { .block_erasers = { { - .eraseblocks = { {64 * 1024, 128} }, + .eraseblocks = { + {64 * 1024, 127}, + {8 * 1024, 8}, + }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, @@ -17201,6 +17226,63 @@ const struct flashchip flashchips[] = { { .vendor = "Winbond", + .name = "W39V080FA", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V080FA, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v080fa, + .unlock = unlock_regspace2_uniform_64k, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program */ + }, + + { + .vendor = "Winbond", + .name = "W39V080FA (dual mode)", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V080FA_DM, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v080fa_dual, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program */ + }, + + { + .vendor = "Winbond", .name = "W49F002U/N", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, @@ -17320,63 +17402,6 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Winbond", - .name = "W39V080FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V080FA (dual mode)", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA_DM, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa_dual, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { .vendor = "Zetta Device", .name = "ZD25D20", .bustype = BUS_SPI, @@ -17453,28 +17478,6 @@ const struct flashchip flashchips[] = { }, { - .vendor = "Unknown", - .name = "SFDP-capable chip", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = SFDP_DEVICE_ID, - .total_size = 0, /* set by probing function */ - .page_size = 0, /* set by probing function */ - .feature_bits = 0, /* set by probing function */ - /* We present our own "report this" text hence we do not */ - /* want the default "This flash part has status UNTESTED..." */ - /* text to be printed. */ - .tested = TEST_OK_PREW, - .probe = probe_spi_sfdp, - .block_erasers = {}, /* set by probing function */ - .unlock = spi_disable_blockprotect, /* is this safe? */ - .write = NULL, /* set by probing function */ - .read = spi_chip_read, - /* FIXME: some vendor extensions define this */ - .voltage = {0}, - }, - - { .vendor = "Programmer", .name = "Opaque flash chip", .bustype = BUS_PROG, |