aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Mention that flashrom can also verify flash contentsPeter Stuge2009-05-012-4/+4
| | | | | | | Corresponding to flashrom svn r451. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Fix usage to show that vendor: is optional in the -m parameterPeter Stuge2009-05-011-1/+1
| | | | | | | Corresponding to flashrom svn r450. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Some functions take no argumentsCarl-Daniel Hailfinger2009-05-011-5/+5
| | | | | | | | | | Make that explicit in the associated prototypes. This avoids a warning on some compilers and is a correctness issue. Corresponding to flashrom svn r449. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add Li-Ta (Ollie) Lo to the author listCarl-Daniel Hailfinger2009-05-011-0/+2
| | | | | | | | | | | He started flashrom back in 2000. Thanks to Ron for pointing this out. Corresponding to flashrom svn r448. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Since the command line interface for flashrom will change for 1.0Carl-Daniel Hailfinger2009-05-012-0/+9
| | | | | | | | | | (all-caps or no-caps for short options, exclude range syntax, etc.) we should tell users in the man page and the usage message about this. Corresponding to flashrom svn r447. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Macronix MX25L1605 TEST_OK_ PROBE READ ERASE WRITEPeter Stuge2009-04-291-1/+1
| | | | | | | | | Per report from Aldrik Dunbar. Thanks! Corresponding to flashrom svn r446. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Handle DragonFly BSD definitions in flash.hPatrick Georgi2009-04-282-3/+3
| | | | | | | | | | | There are still some tweaks necessary to get flashrom to build on DragonFly, but this helps a lot. Corresponding to flashrom svn r445. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Enable scan-build for flashromPatrick Georgi2009-04-261-2/+2
| | | | | | | Corresponding to flashrom svn r444. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
* The flashrom makefile wants to redirect both stdout and stderr to /dev/null ↵Stephan Guilloux2009-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | | for one compile test The old variant of using &>/dev/null works on bash and zsh, but not on dash and tcsh. dash and tcsh interpret it as "background command and truncate /dev/null" which is not what we want. >& works on tcsh and bash, but it is not POSIX compliant. Since make uses /bin/sh and /bin/sh has to be POSIX compliant, we can use the POSIX variant of stderr and stdout redirection. >/dev/null 2>&1 is POSIX compliant. This is specified in SuSv3, Shell Command Language, sections 2.7.2 and 2.7.6. Corresponding to flashrom svn r443 and coreboot v2 svn r4211. Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ward Vandewege <ward@gnu.org>
* MAX may already be definedUwe Hermann2009-04-242-5/+5
| | | | | | | | | Also, fix smaller cosmetics Corresponding to flashrom svn r442 and coreboot v2 svn r4205. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Support MX25L3235DStephan Guilloux2009-04-232-1/+15
| | | | | | | Corresponding to flashrom svn r441 and coreboot v2 svn r4200. Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr> Acked-by: Peter Stuge <peter@stuge.se>
* Don't duplicate option description in README, the manpage already has that infoUwe Hermann2009-04-232-26/+5
| | | | | | | | | Also, additional small cosmetic fix. Corresponding to flashrom svn r440 and coreboot v2 svn r4196. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* All "unknown xy SPI chip" entries claim to have status UNTESTED for ↵Carl-Daniel Hailfinger2009-04-221-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | probe/read/erase/write That is incorrect. A bit of confusion comes from how the #defines are named. We call them TEST_BAD_*, but the message printed by flashrom says: "This flash part has status NOT WORKING for operations:" Something that is unimplemented is definitely not working. Neither of the chip entries mentioned above has erase or write functions implemented, so erase and write are not working. Since their size is unknown, we can't read them in. That means read is not working as well. Probing is a different matter. If a chip-specific probe function had matched, we wouldn't have to handle the chip with the "unknown xy SPI chip" fallback. I'm tempted to call that "not working" as well, but I'm open to discussion on this point. Corresponding to flashrom svn r439 and coreboot v2 svn r4177. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for Gigabyte GA-MA790FX-DQ6Carl-Daniel Hailfinger2009-04-211-0/+2
| | | | | | | | | | | This board uses IT8718F LPC->SPI translation for the flash chip. Tested by Mateusz Murawski. Corresponding to flashrom svn r438 and coreboot v2 svn r4161. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Mateusz Murawski <matowy@tlen.pl>
* Support Macronix MX2512805D flash chipStephan Guilloux2009-04-212-0/+15
| | | | | | | Corresponding to flashrom svn r437 and coreboot v2 svn r4150. Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr> Acked-by: Peter Stuge <peter@stuge.se>
* Trivial indent fixStephan Guilloux2009-04-211-1/+1
| | | | | | | Corresponding to flashrom svn r436 and coreboot v2 svn r4149. Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr> Acked-by: Peter Stuge <peter@stuge.se>
* After verification in datasheets, all MX25 accept the same opcodes 0x60 and ↵Stephan Guilloux2009-04-201-7/+8
| | | | | | | | | 0xC7 for Chip Erase Corresponding to flashrom svn r435 and coreboot v2 svn r4146. Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* board_enables: reconstruct tableLuc Verhaegen2009-04-201-421/+43
| | | | | | | | | | | | | This patch restores the pciid based board matching table. It makes this table readable and hackable again, and the only disadvantage is that the right margin is way beyond the rather dogmatic 80. All 0x0000 pci ids have been string replaced by 0 to more easily spot missing ids, and extra comments have been added to explain how the various entries are used. Corresponding to flashrom svn r434 and coreboot v2 svn r4142. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se>
* Trivial README change Flashrom->flashromPeter Stuge2009-04-201-5/+5
| | | | | | | Corresponding to flashrom svn r433 and coreboot v2 svn r4141. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* MX25L1605 and 1635 accept Chip Erase opcodes 60 and C7Stephan Guilloux2009-04-191-2/+2
| | | | | | | Corresponding to flashrom svn r432 and coreboot v2 svn r4139. Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr> Acked-by: Peter Stuge <peter@stuge.se>
* Add MX25L1635D support, as discussed on #corebootStephan Guilloux2009-04-191-0/+13
| | | | | | | Corresponding to flashrom svn r431 and coreboot v2 svn r4138. Signed-off-by: Stephan Guilloux <stephan.guilloux@free.fr> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add VIA PC3500G boardPeter Stuge2009-04-171-0/+14
| | | | | | | | | It has SPI flash behind ITE8716 on LPC. Corresponding to flashrom svn r430 and coreboot v2 svn r4132. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: illdred <illdred@gmail.com>
* Some coding style and consistency fixesUwe Hermann2009-04-158-46/+60
| | | | | | | Corresponding to flashrom svn r429 and coreboot v2 svn r4117. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix typoUwe Hermann2009-04-131-1/+1
| | | | | | | | | Add missing copyright year. Corresponding to flashrom svn r428 and coreboot v2 svn r4107. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Mention a few more flash chip packages in README/manpageUwe Hermann2009-04-112-6/+8
| | | | | | | Corresponding to flashrom svn r427 and coreboot v2 svn r4092. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix typoUwe Hermann2009-04-101-1/+1
| | | | | | | Corresponding to flashrom svn r426 and coreboot v2 svn r4089. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Various manpage / README fixesUwe Hermann2009-04-102-29/+35
| | | | | | | | | | | | | | - Improve description a bit, especially wrt chip packages and protocols. - Add some missing parameters to manpage option descriptions. - Remove long obsolete DoC support note. Corresponding to flashrom svn r425 and coreboot v2 svn r4088. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix the typo should indeed be a 0x2eMondrian nuessle2009-04-091-2/+1
| | | | | | | | | Tested on an iWILL DK8-HTX board. Corresponding to flashrom svn r424 and coreboot v2 svn r4086. Signed-off-by: Mondrian nuessle <nuessle@uni-hd.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Board enable support for HP DL145 G3Mondrian Nuessle2009-03-301-0/+27
| | | | | | | | | | | This is a BCM5785 based machine, WP# and TLB# need to be deasserted using GPIO 2 and 5 from the PM registers of the southbridge. This is very similar to the x3455 implementation. Corresponding to flashrom svn r423 and coreboot v2 svn r4031. Signed-off-by: Mondrian Nuessle <nuessle@uni-hd.de> Acked-by: Peter Stuge <peter@stuge.se>
* Improve readability of Atmel AT45 commentsCarl-Daniel Hailfinger2009-03-191-27/+28
| | | | | | | | | | Move the Atmel AT45 comments about block and page sizes from the end of the struct to the individual struct members to improve readability. Corresponding to flashrom svn r422 and coreboot v2 svn r4020. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
* This patch adds "high coreboot table support" to coreboot version 2Stefan Reinauer2009-03-172-8/+29
| | | | | | | | | | | | | | | | | | | Some bootloaders seem to overwrite memory starting at 0x600, thus destroying the coreboot table integrity, rendering the table useless. By moving the table to the high tables area (if it's activated), this problem is fixed. In order to move the table, a 40 bytes mini coreboot table with a single sub table is placed at 0x500/0x530 that points to the real coreboot table. This is comparable to the ACPI RSDT or the MP floating table. This patch also adds "table forward" support to flashrom and nvramtool. Corresponding to flashrom svn r421 and coreboot v2 svn r4012. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se>
* FreeBSD definitions of (read|write)[bwl] collide with our ownCarl-Daniel Hailfinger2009-03-0617-348/+348
| | | | | | | | | | | | Before we attempt trickery, we can simply rename the accessor functions. Patch created with the help of Coccinelle. Corresponding to flashrom svn r420 and coreboot v2 svn r3984. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <idwer_v@hotmail.com> Acked-by: Patrick Georgi <patrick@georgi-clan.de>
* Reduce use of volatile variablesCarl-Daniel Hailfinger2009-03-061-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the conversion of flash chip accesses to helper functions, I spotted assignments to volatile variables which were neither placed inside the mmapped ROM area nor were they counters. Due to the use of accessor functions, volatile usage can be reduced significantly because the accessor functions take care of actually performing the reads/writes correctly. The following semantic patch spotted them (linebreak in python string for readability reasons, please remove before usage): @r exists@ expression b; typedef uint8_t; volatile uint8_t a; position p1; @@ a@p1 = readb(b); @script:python@ p1 << r.p1; a << r.a; b << r.b; @@ print "* file: %s line %s has assignment to unnecessarily volatile variable: %s = readb(%s);" % (p1[0].file, p1[0].line, a, b) Result was: HANDLING: sst28sf040.c * file: sst28sf040.c line 44 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 43 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 42 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 41 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 40 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 39 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 38 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 58 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 57 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 56 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 55 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 54 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 53 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); * file: sst28sf040.c line 52 has assignment to unnecessarily volatile variable: tmp = readb(TODO: Binary); The following semantic patch uses the spatch builtin match printing functionality by prepending a "*" to the line with the pattern: @@ expression b; typedef uint8_t; volatile uint8_t a; @@ * a = readb(b); Result is: HANDLING: sst28sf040.c diff = - tmp = readb(bios + 0x1823); - tmp = readb(bios + 0x1820); - tmp = readb(bios + 0x1822); - tmp = readb(bios + 0x0418); - tmp = readb(bios + 0x041B); - tmp = readb(bios + 0x0419); - tmp = readb(bios + 0x040A); } static __inline__ void unprotect_28sf040(volatile uint8_t *bios) @@ -49,13 +42,6 @@ static __inline__ void unprotect_28sf040 /* ask compiler not to optimize this */ volatile uint8_t tmp; - tmp = readb(bios + 0x1823); - tmp = readb(bios + 0x1820); - tmp = readb(bios + 0x1822); - tmp = readb(bios + 0x0418); - tmp = readb(bios + 0x041B); - tmp = readb(bios + 0x0419); - tmp = readb(bios + 0x041A); } static __inline__ int erase_sector_28sf040(volatile uint8_t *bios, It's arguably a bit easier to read if you get used to the leading "-" for matching lines. This patch was enabled by Coccinelle: http://www.emn.fr/x-info/coccinelle/ Corresponding to flashrom svn r419 and coreboot v2 svn r3973. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Joseph Smith <joe@settoplinux.org>
* Use helper functions to access flash chipsCarl-Daniel Hailfinger2009-03-0517-342/+372
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now we perform direct pointer manipulation without any abstraction to read from and write to memory mapped flash chips. That makes it impossible to drive any flasher which does not mmap the whole chip. Using helper functions readb() and writeb() allows a driver for external flash programmers like Paraflasher to replace readb and writeb with calls to its own chip access routines. This patch has the additional advantage of removing lots of unnecessary casts to volatile uint8_t * and now-superfluous parentheses which caused poor readability. I used the semantic patcher Coccinelle to create this patch. The semantic patch follows: @@ expression a; typedef uint8_t; volatile uint8_t *b; @@ - *(b) = (a); + writeb(a, b); @@ volatile uint8_t *b; @@ - *(b) + readb(b) @@ type T; T b; @@ ( readb | writeb ) (..., - (T) - (b) + b ) In contrast to a sed script, the semantic patch performs type checking before converting anything. Tested-by: Joe Julian Corresponding to flashrom svn r418 and coreboot v2 svn r3971. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: FENG Yu Ning <fengyuning1984@gmail.com>
* Add SST25VF040.REMS with TEST_OK_ PROBE READZheng Bao2009-02-251-0/+14
| | | | | | | Corresponding to flashrom svn r417 and coreboot v2 svn r3958. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Peter Stuge <peter@stuge.se>
* SST29EE020A TEST_OK_ PROBE READ ERASE WRITEPeter Stuge2009-02-221-1/+1
| | | | | | | | | Report by Holger Mickler. Thanks! Corresponding to flashrom svn r416 and coreboot v2 svn r3956. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Fix broken flash chip base address logicPeter Stuge2009-02-091-1/+1
| | | | | | | | | | | | | Elan SC520 requries us to deal with flash chip base addresses at locations other than top of 4GB. The logic for that was incorrectly triggered also when a board had more than one flash chip. This patch will honor flashbase only when probing for the first flash chip on the board, and look at top of 4GB for later chips. Corresponding to flashrom svn r415 and coreboot v2 svn r3932. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Myles Watson <mylesgw@gmail.com>
* MSI MS-7046 board enablePeter Stuge2009-02-021-0/+22
| | | | | | | Corresponding to flashrom svn r414 and coreboot v2 svn r3927. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: David Tiemann <davidtiemann@gmail.com>
* Following patch fixes VIA SPI (VT8237S)Rudolf Marek2009-02-011-0/+1
| | | | | | | | | It needs to have opcodes initialized same way as ICH7. Corresponding to flashrom svn r413 and coreboot v2 svn r3926. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se>
* Factor out read and erase functions from flashrom main()Carl-Daniel Hailfinger2009-01-281-38/+57
| | | | | | | Corresponding to flashrom svn r412 and coreboot v2 svn r3923. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
* Add VT8237A PCI IDPeter Stuge2009-01-261-0/+1
| | | | | | | Corresponding to flashrom svn r411 and coreboot v2 svn r3919. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Fix one dead increment and one dead assignment as found by clangPeter Stuge2009-01-262-2/+1
| | | | | | | | | Thanks Patrick! Corresponding to flashrom svn r410 and coreboot v2 svn r3918. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Driver for ST M29F002T/NT/BPeter Stuge2009-01-264-6/+116
| | | | | | | | | | | T/NT TEST_OK_ PROBE READ ERASE WRITE Test report from Julia. Thanks! Corresponding to flashrom svn r409 and coreboot v2 svn r3917. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Julia Longtin <juri@solarnetone.org>
* Fix copypaste error in r3913Peter Stuge2009-01-261-1/+1
| | | | | | | Corresponding to flashrom svn r408 and coreboot v2 svn r3916. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* SST25VF040B using 0x90 identification and AAI writePeter Stuge2009-01-263-0/+41
| | | | | | | | | | | | | SST AAI is Auto Address Increment writing, a streamed write to the flash chip where the first write command sets a starting address and following commands simply append data. Unfortunately not supported by Winbond SPI masters. From July 2008. Corresponding to flashrom svn r407 and coreboot v2 svn r3913. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Decode SST25VF040B status register, also from July 2008Peter Stuge2009-01-261-1/+26
| | | | | | | Corresponding to flashrom svn r406 and coreboot v2 svn r3912. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Intel Desktop Board D201GLYPeter Stuge2009-01-261-0/+14
| | | | | | | Corresponding to flashrom svn r405 and coreboot v2 svn r3911. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Winbond SuperIO SPI driverPeter Stuge2009-01-264-3/+218
| | | | | | | | | | Developed and tested to work on Intel D201GLY in July 2008. Tested by a helpful person on IRC whose name I've since forgotten. Sorry! Corresponding to flashrom svn r404 and coreboot v2 svn r3910. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Ward Vandewege <ward@gnu.org>
* Export Winbond SuperIO register access functions in board_enable.cPeter Stuge2009-01-262-5/+10
| | | | | | | Corresponding to flashrom svn r403 and coreboot v2 svn r3909. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Document exit() codes introduced in r3907Peter Stuge2009-01-262-0/+9
| | | | | | | Corresponding to flashrom svn r402 and coreboot v2 svn r3908. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Ward Vandewege <ward@gnu.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 17:06:05 +0000