| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
ft2232_spi ftdi_usb_open() is called with the constant FTDI_VID vendor
ID.
Fix it by using the programmer-type-dependent ft2232_vid variable, to
allow programmers with other vendor IDs.
Corresponding to flashrom svn r1230.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
Check at init time whether the chip is a type 'H' (FT2232H or FT4232H).
If not, omit the disable-divide-by-5 (0x8a) command which can confuse
older chips.
Corresponding to flashrom svn r1229.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
It is possible that ftdi_read_data() returns less data
than requested. Catch this case and retry reading the rest
of the buffer.
Corresponding to flashrom svn r1228.
Signed-off-by: Alex Badea <vamposdecampos@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
Allow any firmware version from 2.x.y to 5.x.y.
Handle errors for the initial USB command to catch -EPERM.
Corresponding to flashrom svn r1227.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
Add a generic voltage parameter parser.
Move tolower_string() from dummyflasher.c to flashrom.c to make it
available everywhere.
Corresponding to flashrom svn r1226.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Avoid two memory leaks in doit() which were unproblematic for flashrom
because flashrom terminates after finishing doit(). Rename oldcontents
to curconents in erase_and_write_block_helper(). Unify the code for
all granularities in get_next_write(). Return write length from
get_next_write() instead of filling it as referenced parameter.
Thanks to Michael Karcher for pointing out the first two issues. Thanks
to David Hendricks for pointing out the third issue and suggesting a way
to unify that code.
Corresponding to flashrom svn r1225.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If you write an image full of 0xff, flashrom will erase and detect that
no write is needed. If you write an image which differs only in some
parts from the current flash contents, flashrom will detect that and not
touch unchanged areas.
Fix a long-standing bug in need_erase() for 256 byte granularity as
well.
Nice side benefit: Detailed progress printing. S means skipped E means
erased W means written
Thanks to Andrew Morgan for testing countless iterations of this patch.
Thanks to Richard A. Smith for testing on Dediprog SF100. Thanks to
David Hendricks for the review and for creating a partial write torture
test script and testing with it on Intel NM10 and AMD SB700 SPI. Thanks
to Idwer Vollering for testing with Intel SPI NICs. Thanks to Rudolf
Marek for testing on AMD SB710 and SiI SATA controllers. Thanks to
Michael Karcher for the review.
Corresponding to flashrom svn r1224.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a layout file was specified, all regions not mentioned in the layout
file were taken from the new image instead of being preserved.
If regions overlap, the non-included regions won.
New behaviour:
If a layout file is specified, only the regions explicitly requested for
inclusion will be taken from the new image.
If regions overlap, the included regions win.
Corresponding to flashrom svn r1223.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This serves as a sort of progress indicator.
The output looks like this::
localhost ~ # flashrom="./flashrom" sh flashrom_partial_write_test.sh
testing flashrom binary: ./flashrom
Running test in /tmp/tmp.4xPejwaADU
ffh pattern written in ff_4k.bin
00h pattern written in 00_4k.bin
Reading BIOS image
Original image saved as bios.bin
aligned region 0 test: passed
...
aligned region 15 test: passed
unaligned region 0 test: passed
...
unaligned region 15 test: passed
Result: PASSED
restoring original bios image using system's flashrom
test files remain in /tmp/tmp.4xPejwaADU
Corresponding to flashrom svn r1222.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
| |
Avoid non-portable seq.
Corresponding to flashrom svn r1221.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
You have to choose between
- no emulation
- ST M25P10.RES SPI flash chip (RES, page write)
- SST SST25VF040.REMS SPI flash chip (REMS, byte write)
- SST SST25VF032B SPI flash chip (RDID, AAI write)
Example usage: flashrom -p dummy:emulate=SST25VF032B
Flash image persistence is available as well.
Example usage: flashrom -p dummy:image=dummy_simulator.rom
Allow setting the max chunksize for page write with the dummy
programmer.
Example usage: flashrom -p dummy:spi_write_256_chunksize=5
Flash emulation is compiled in by default.
This code helped me find and fix various bugs in the SPI write code
as well as in the testsuite.
Corresponding to flashrom svn r1220.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: David Hendricks <dhendrix@google.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
util/flashrom_partial_write_test.sh
Replace "$flashrom_PARAM" with ${FLASHROM_PARAM} in
util/flashrom_partial_write_test.sh to avoid passing in quoted
parameters which can cause problems especially if flashrom_PARAM is
empty or contains spaces.
Corresponding to flashrom svn r1219.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
Focus is on partial write and layout functionality.
Minor modifications by Carl-Daniel Hailfinger.
Corresponding to flashrom svn r1218.
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The bug was invisible so far because we always started at offset 0. The
pending partial write patch uses nonzero start offsets and trips over
this bug.
Clarify a few comments in IT87 SPI.
Thanks to Idwer Vollering for reporting write breakage with my latest
partial write patch. This should fix the underlying problem.
Corresponding to flashrom svn r1217.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previous probes might have had too short delays for entering ID mode,
so the chip may still be in the process of entering the ID mode. Due to
that, an additional delay before the reset makes sense.
Add FEATURE_RESET_MASK to deal cleanly with those feature bits.
Maciej Pijanka tested the patch and it fixes probing for him with some
old Atmel chips.
Corresponding to flashrom svn r1216.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Anders Juel Jensen <andersjjensen@gmail.com>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This will allow flashrom to skip erase of already-erased blocks and to
skip write of blocks which already have the wanted contents.
Avoid emergency messages by checking if the chip contents after a failed
write operation (erase/write) are unchanged.
Keep the emergency messages after a failed pure erase. That part is
debatable because if someone wants erase, he pretty sure doesn't care
about the flash contents anymore.
Please note that this introduces additional overhead of a full chip read
before write. This is frowned upon by people with slow programmers. A
followup patch will make this configurable.
Corresponding to flashrom svn r1215.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Details, lspci/superiotool/flashrom logs:
http://www.flashrom.org/pipermail/flashrom/2010-October/005160.html
Also add the vendor website URL for this board.
Corresponding to flashrom svn r1214.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
| |
Also, spelling correction.
Corresponding to flashrom svn r1213.
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Doit() is the monster function we split off from main() when we created
cli_classic() and tried to introduce some abstraction.
doit() is a poster child of WTFs on an astronomic scale.
Make doit() less bad by factoring out self-contained code.
Corresponding to flashrom svn r1212.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The inner write functions which handle partial write are renamed to the
original name of their wrappers. The write wrappers are removed.
Corresponding to flashrom svn r1211.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Andrew Morgan <ziltro@ziltro.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kill duplicated code.
Annotate write functions with their chunk size.
Mark Fujitsu MBM29F400BC and ST M29F400BB as untested because their
write code no longer uses a broken layout.
Corresponding to flashrom svn r1210.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
| |
No behavioural changes, just equivalence transformations.
Corresponding to flashrom svn r1209.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The currently used write functions (wrappers) all use helpers which
perform the actual write (inner functions).
The signature of the write wrappers is: int write_chip(struct flashchip
*flash, uint8_t * buf);
The signature of the inner write functions varied a lot. This patch
changes them to: int write_part(struct flashchip *flash, uint8_t *src,
int start, int len);
Did you know that flashrom has only 8 inner write functions for all
flash chips? write_page_write_jedec_common write_sector_jedec_common
write_sector_28sf040 spi_chip_write_256_new spi_chip_write_1_new
spi_aai_write_new write_page_82802ab write_page_m29f400bt
Export all inner write functions.
Change the function signature of wait_82802ab to eliminate single-use
variables.
Remove an error message in write_page_m29f400bt which was printed for
every byte written regardless of success.
Add sharplhf00l04.c to the list of flash chip drivers in the Makefile.
While the functions in there are unused, I suspect we will need them
later, and by hooking the file up we ensure that compilation won't
break.
Corresponding to flashrom svn r1208.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
| |
Progress printing should be handled in the generic code, and will end up
there once partial write is possible.
Corresponding to flashrom svn r1207.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flashrom had an implicit erase-on-write for most flash chip and
programmer drivers, but it was not entirely consistent.
Some drivers had their own hand-rolled partial update functionality
which made handling partial updates from generic code impossible.
Move implicit erase out of chip drivers, and kill some dead erase
functions at the same time. A full chip erase is now performed in the
generic code for all flash chips on write, and after that the whole chip
is written.
Corresponding to flashrom svn r1206.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1204.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_BITBANG_SPI was not selected if CONFIG_NICINTEL_SPI was on by default.
Wiki output was missing all flash chips if CONFIG_INTERNAL was not
selected.
Use correct type for toupper()/tolower()/isspace() functions.
Specify software requirements in a generic way.
Non-x86 compilation does not work with the default programmer set, so
list the make parameters which result in a working build.
Corresponding to flashrom svn r1203.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
| |
A lot of messages sent@flashrom.org just have "flashrom -V" as the subject.
Ask people to include more information in the subject line to make life
easier for developers/supporters.
Corresponding to flashrom svn r1202.
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
SPI write status register (WRSR) may take longer than 100 ms, and it
makes sense to poll for completion in 10 ms steps until 5 s are over.
This patch complements r1115.
Corresponding to flashrom svn r1201.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Joshua Roys <roysjosh@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Fix PCI device ID printing.
Remove personal e-mail addresses from the man page, point people to
flashrom@flashrom.org instead.
Corresponding to flashrom svn r1200.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
| |
Flashrom -L output did not contain a list of programmers nor were
all programmers listed. Fix it and mention at least the name of each
programmer. Wiki output is unchanged, and will need separate fixups.
Corresponding to flashrom svn r1199.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Direct I/O library for Mac OS X is now called DirectHW to make sure
people can find it via an internet search.
DirectIO was a generic name for a concept and thus not a good
distinguisher for a library.
Corresponding to flashrom svn r1198.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Idwer Vollering <vidwer@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Update programmer parameter documentation.
Corresponding to flashrom svn r1197.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1196.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
| |
Add a clarifying comment about why low memory is never unmapped.
Corresponding to flashrom svn r1195.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use AAI write for SST SST25VF032B.
Speedup from 228 to 113 seconds.
Use page (256 byte) write for SST SST25VF064C.
Speedup from 3091 to 123 seconds.
Corresponding to flashrom svn r1194.
Signed-off-by: Helge Wagner <helge.wagner@ge.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1193.
Signed-off-by: Helge Wagner <helge.wagner@ge.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This also adds (and marks as tested) a chipset-enable for the SiS 741.
All operations successfully tested on hardware.
lspci/superiotool:
http://www.flashrom.org/pipermail/flashrom/2010-September/004710.html
Corresponding to flashrom svn r1192.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tested
Match on ethernet and north bridge.
This is tested on an OptiPlex GX1 400L+ but will probably work for
the whole GX1 series as they all share the same vendor BIOS.
lspci/flashrom output
http://www.flashrom.org/pipermail/flashrom/2010-July/004042.html
lspci output (OptiPlex GX1 unknown model)
http://www.coreboot.org/pipermail/coreboot/2010-May/058040.html
superiotool output (OptiPlex GX1 266L+)
http://www.flashrom.org/pipermail/flashrom/2009-July/000207.html
lspci/dmidecode output (OptiPlex GX1 266L+)
http://www.coreboot.org/pipermail/coreboot/2009-July/050958.html
Corresponding to flashrom svn r1191.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Not sure if this is the final/correct fix, but for now it definately
fixes writes on FT2232H hardware. I have tested this on both, the
DLP Design DLP-USB1232H, and the openbiosprog-spi hardware.
Thanks to Joshua Roys <roysjosh@gmail.com> for the hint on IRC.
Corresponding to flashrom svn r1190.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Strip package prefix in constant names (everything before "28F").
Prefix every constant name with INTEL_
Sort intel chip constants by ID.
Rename the following constants to their "canonical" name:
P28F400BT (0x70 -> INTEL_28F400T (28F400BV/BX/CE/CV-T)
P28F400BB (0x71) -> INTEL_28F400B (28F400BV/BX/CE/CV-B)
P28F004BT (0x78) -> INTEL_28F004T (28F004B5/BE/BV/BX-T)
P28F004BB (0x79) -> INTEL_28F004B (28F004B5/BE/BV/BX-B)
E_28F008S5 (0xA6) -> INTEL_28F008S3 (28F008S3/S5/SC)
E_28F004S5 (0xA7) -> INTEL_28F004S3 (28F008S3/S5/SC)
P28F001BXT (0x94) -> INTEL_28F001T (28F001BN/BX-T)
P28F001BXB (0x95) -> INTEL_28F001B (28F001BN/BX-B)
E_28F016S5 (0xAA) -> INTEL_28F016S3 (28F016S3/S5/SC)
Add chip IDs for the following chips:
28F320J5
28F640J5
28F320J3
28F640J3
28F128J3
28F256J3
28F200BL/BV/BX/CV-T
28F200BL/BV/BX/CV-B
28F002BL/BV/BX-B
28F008BE/BV-T
28F008BE/BV-B
28F800B5/BV/CE/CV-T
28F800B5/BV/CE/CV-B
28F016SA/SV
28F008SA
28F008S3/S5/SC
28F008S3/S5/SC
28F016XS
28F010
28F512
28F256A
28F020
28F016B3-T
28F016B3-B
28F008B3-T
28F008B3-B
28F004B3-T
28F004B3-B
Corresponding to flashrom svn r1189.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Allow specification of an alternate base address with
flashrom -p rayer_spi:iobase=0x278
Any base address is allowed as long as it is nonzero, below 65536 and a
multiple of four.
Read speed is now on par with original spipgm.exe.
Corresponding to flashrom svn r1188.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Martin Rehak <rayer@seznam.cz>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reported by Konstantin <hc@comp.susu.ac.ru>
lspci (superiotool missing, doesn't matter for this patch)
http://www.coreboot.org/pipermail/flashrom/2010-September/004609.html
DMI is needed, as there are no usefull PCI IDs.
(no test of that board yet, thus marked as untested)
Corresponding to flashrom svn r1187.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
| |
Update README to list all the needed rpm files for DOS cross-compilation
and update the download location of cwsdpmi.
Corresponding to flashrom svn r1186.
Signed-off-by: Idwer Vollering <vidwer+flashrom@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1185.
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Iain Paton <selsinork@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
| |
This doesn't include changes to the frontend which must be
done separately, so this won't work out of the box.
This code was tested on hardware.
Corresponding to flashrom svn r1184.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1183.
Signed-off-by: Vladimir 'phcoder' Serbinenko <phcoder@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Half a dozen hardcoded strcmp() don't make sense if we need a
chassis-type list anyway once we merge the internal DMI decoder. Provide
and array of the most interesting chassis types and annotate them with
laptop/non-laptop status. Match the dmidecode chassis type against the
strings in the array.
Corresponding to flashrom svn r1182.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Corresponding to flashrom svn r1181.
Change the physmap* behaviour to use (void*)-1 as error code instead
of NULL. That way, 1:1 mapped memory can be supported properly
because (void*)0 is not a magic pointer anymore.
(void*)-1 on the other hand is a rather unlikely memory offset, so that
should be safe.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The variable 'ret' is unused when compiling on big-endian architecture.
This produces an "unused variable" message, which might be treated as error
if -Werror was passed to compiler.
With this patch I was able to compile flashrom cleanly on ppc and ppc64:
http://koji.fedoraproject.org/koji/taskinfo?taskID=2472482
http://koji.fedoraproject.org/koji/taskinfo?taskID=2472484
Corresponding to flashrom svn r1180.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
|