aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* Refine messages regarding AMD FCH flash protectionsStefan Tauner2014-07-151-5/+8
| | | | | | | Corresponding to flashrom svn r1829. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add Board Enable for ASUS Vintage 2 PH1 (P5LD2-MQ)Dima Veselov2014-07-142-0/+3
| | | | | | | | | | | | ASUS Vintage 2 PH1 barebone systems have a mainboard from the P5LD2 series, namely the P5LD2-MQ (although it is labeled V2-PH1). Pin 16 GPIO needs to be raised to enable write/erase like on other boards of the series. NB: it uses a ICH7DH southbridge and hence requires different PCI IDs. Corresponding to flashrom svn r1828. Signed-off-by: Dima Veselov <kab00m@lich.phys.spbu.ru> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Improve messages on failed erases with default verbosityStefan Tauner2014-07-131-2/+2
| | | | | | | | | | | | | | | | | | | | | Without this... Erasing and writing flash chip... ERASE FAILED at 0x00001000! Expected=0xff, Read=0xb4, failed byte count from 0x00000000-0x0000ffff: 0xef09 ERASE FAILED! Reading current flash chip contents... done. <loooooong break while the next eraser and writing is tried> Erase/write done. Verifying flash... VERIFIED. Even if there is not a long temporal pause, it is very confusing for the user to first see a failed erase, followed by a read, a done message and eventually the verification message. This patch inserts "Looking for another erase function." where there is just a silent pause above. Corresponding to flashrom svn r1827. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix Intel FWH IDSEL message printingStefan Tauner2014-07-131-7/+7
| | | | | | | | | | This should get rid of extra and/or missing line breaks in verbose(+) output on Intel chipsets. Corresponding to flashrom svn r1826. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Macronix MX29F022(N)B and MX29F022(N)TDaniele Forsi2014-07-132-0/+65
| | | | | | | | | | The MX29F022(N)T definition was successfully tested by Daniele. Corresponding to flashrom svn r1825. Signed-off-by: Daniele Forsi <dforsi@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix garbage handling in DMI stringsStefan Tauner2014-07-131-17/+35
| | | | | | | | | | | | | | | | | | | | Previously we tried to replace garbage characters with <space> directly in the read-only memory-mapped SMBIOS area(!). This could never have worked for any DMI strings with garbage and results in a segfault on machines with such strings. Thanks to Brian Rak (Supermicro X10SLE-F) and John Pohlman (HP XW9400) for reporting this issue. With this patch the strings are duplicated within dmi_string() already, just before we sanitize them. Also, the limit variable used everywhere points to the first invalid byte address. Refine respective checks accordingly. Corresponding to flashrom svn r1824. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for Macronix MX25U12835FMartin Roth2014-07-131-0/+40
| | | | | | | | Corresponding to flashrom svn r1823. Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* EEPROM support: handle implicit eraseCarl-Daniel Hailfinger2014-06-162-0/+6
| | | | | | | | | | | Add support for EEPROMs with 1 byte granularity and implicit erase on write. flashrom will not try to erase before write on these chips. Explicitly requested erase with -E is done by writing 0xff. Corresponding to flashrom svn r1822. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add selfcheck_board_enables()Stefan Tauner2014-06-123-0/+35
| | | | | | | | | | | | Check for NULL termination of the array, that each board has the two main PCI ID sets defined, that coreboot vendor and model fields are either both set or unset, and that at least either an enable function or a max decode size is available. Corresponding to flashrom svn r1821. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove MCP6/7/8 SPI log requestsStefan Tauner2014-06-121-14/+5
| | | | | | | | | | We got enough (and no one is looking at them for the time being anyway). Also, return an error code in the case no bus type could be detected. Corresponding to flashrom svn r1820. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Introduce helpers.cStefan Tauner2014-06-125-52/+81
| | | | | | | | | | Move some suitable functions there, add it to the Makefile, but leave the declarations in flash.h for now. Corresponding to flashrom svn r1819. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for Sanyo LE25FW106Stefan Tauner2014-06-044-0/+40
| | | | | | | | | | | Also, add spi_disable_blockprotect_bp1_srwd(). Originally written and tested by The Raven <originalraven@hotmail.com>. Corresponding to flashrom svn r1818. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* print_wiki.c: there is only one way to represent timeStefan Tauner2014-06-021-2/+4
| | | | | | | | | ISO 8601. Corresponding to flashrom svn r1817. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* print_wiki.c: refine header and include a legend explaining the test state ↵Stefan Tauner2014-06-021-4/+26
| | | | | | | | | representation Corresponding to flashrom svn r1816. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Utilize new tested states for chipsets as wellStefan Tauner2014-06-022-268/+268
| | | | | | | | | | | Mark all ME-enabled Intel chipsets as DEP, alter print.c accordingly (print_wiki.c was already prepared). And realign the chipset enable table when we are at it already. Corresponding to flashrom svn r1815. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add default arguments for the default programmer (only)Stefan Tauner2014-06-022-2/+10
| | | | | | | | | This code exists thanks to food for thought from Urja Rannikko. Corresponding to flashrom svn r1814. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move global io_base_addr into compilation unitsStefan Tauner2014-06-0110-7/+10
| | | | | | | Corresponding to flashrom svn r1813. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add IT8212F as programmerKyösti Mälkki2014-06-015-2/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | This PCI PATA controller can use 3V parallel flash up to 128 kB. My card was identified as: PCI 1283:8212, subsystem 1283:0001. and labelled as: Innovision Multimedia LTD. EIO ATA133 RAID (DM-8401 Ver A) This particular card did not require setting of any GPIO signals to enable flash writing. My card has Pm39LV512 in PLCC32 package without socket. Rebased by Stefan (automatic cleanup, some PCI changes, changed enable bit handling). Committed with test state NT because the rebased version was not tested on real hardware (yet). Corresponding to flashrom svn r1812. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* atavia: Fix a few problems overlooked/introduced while rebasingStefan Tauner2014-06-013-11/+5
| | | | | | | Corresponding to flashrom svn r1811. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Atmel (now Adesto) AT25DL081 and AT25DL161Stefan Tauner2014-06-012-1/+79
| | | | | | | Corresponding to flashrom svn r1810. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add VIA VT6421A LPC programmer driverJonathan Kollasch2014-06-015-4/+259
| | | | | | | | | | | | | | | Due to the mysterious address handling of this chip the user can specify a base address with the offset parameter, e.g.: flashrom -p atavia:offset=0xFFF00000 Thanks to Idwer Vollering for his iterative testing of this code, as well as to Martijn Bastiaan who did the last tests before merging. Corresponding to flashrom svn r1809. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Combine block_erase*_en29lv640b and block_erase*_m29f400bt respectivelyStefan Tauner2014-06-014-75/+20
| | | | | | | | | | | | | | | This patch combines two identical block and chip erase functions respectively: - Merge block_erase_m29f400bt and block_erase_en29lv640b into erase_block_shifted_jedec. - Merge block_erase_chip_m29f400bt and block_erase_chip_en29lv640b into erase_chip_block_shifted_jedec. Leave their implementations in en29lv640b.c for now. Corresponding to flashrom svn r1808. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* print.c: improve device printingStefan Tauner2014-06-011-4/+43
| | | | | | | | | | Add headers and columns (i.e. print device entries in a table-like manner). Also, add and use test_state_to_text() to support the new test states. Corresponding to flashrom svn r1807. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix PMC Pm25LV512 and Pm25LV010 probingStefan Tauner2014-05-302-6/+7
| | | | | | | | | | | | | | | | | Apparently PMC did not understand the purpose of the JEDEC continuation code. These chips reply to RES (the only supported ID command) with the prefix-less vendor ID, a device ID, eventually followed by the continuation byte for the vendor ID. This fix uses only the first two bytes instead of appending the continuation code to the device ID. The problem was reported by The Raven who also tested the fix on a Pm25LV010 (with an imprint of "Pm25LV010E"). Corresponding to flashrom svn r1806. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* jedec.c: constify a bit moreStefan Tauner2014-05-292-11/+9
| | | | | | | | | | Also, include chipdrivers.h to find conflicting types between exported declarations and actual implementations. Corresponding to flashrom svn r1805. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* print_wiki: simplify template handlingStefan Tauner2014-05-281-37/+23
| | | | | | | | | | Add test_state_to_template() and use it everywhere to select the correct template. This also enables the use of the new states in all tables. Corresponding to flashrom svn r1804. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* CID1129998/1129999: Unchecked return value from libraryStefan Reinauer2014-05-271-7/+30
| | | | | | | | | | | | | | Check return values of various fcntl() invocations in serialport_config(), serialport_read_nonblock() and serialport_write_nonblock(). Also, remove some superfluous print conversion specifiers and refine messages. Corresponding to flashrom svn r1803. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rename some spi_prettyprint_status_register_* functionsStefan Tauner2014-05-273-111/+111
| | | | | | | | | | | | Spi_prettyprint_status_register_default_bpX -> spi_prettyprint_status_register_bpX_srwd Why was the default in there anyway? :) Corresponding to flashrom svn r1802. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for ESMT F25L32PAStefan Tauner2014-05-274-0/+50
| | | | | | | Corresponding to flashrom svn r1801. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix various tiny problems in verify_range()Stefan Tauner2014-05-271-7/+8
| | | | | | | | | | | | | First of all, fix CID1130010: Resource leak as reported by Stefan Reinauer. Alternatively to Stefan's approach, just move the malloc() out of the scope. Additionally, get rid of an unnecessary exit(1) and correctly return -1 in all error cases as documented. Corresponding to flashrom svn r1800. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix selfcheck of various arraysStefan Tauner2014-05-263-34/+28
| | | | | | | | | | | | Stefan Reinauer has reported ridiculous NULL checks for arrays in our self_check function found by Coverity (CID1130005). This patch removes the useless checks but keeps and fixes the one responsible for the flashchips array by exporting the array size in a new constant. Corresponding to flashrom svn r1799. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add two new states to enum test_state and use it for flashchipsStefan Tauner2014-05-265-71/+113
| | | | | | | | | | | | | | | | | | | | | | | | The new enum test_state looks like this: enum test_state { OK = 0, NT = 1, /* Not tested */ BAD, /* Known to not work */ DEP, /* Support depends on configuration (e.g. Intel flash descriptor) */ NA, /* Not applicable (e.g. write support on ROM chips) */ }; The second new state 'NA' is introduced, among other things, to indicate the erase and write states of real ROMs correctly. This is also implemented by this patch and required to exchange the previous bit mask in struct flashchip with a new struct containing an enum test_state for each operation. The -L output is changed accordingly to print '-' in the case of an N/A state and the wiki output uses a new template producing a greyed out cell. Previous users of enum test_state are not affected by this change (yet). Corresponding to flashrom svn r1798. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Constify dediprog's write functions tooStefan Tauner2014-05-251-4/+4
| | | | | | | | | | I forgot doing so in r1789 which broke compiling the dediprog module with -Werror (which is default). Thanks to Mike Hibbett for reporting this. Corresponding to flashrom svn r1797. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Sanyo LE25FW406AStefan Tauner2014-05-182-1/+33
| | | | | | | | | | No datasheet available. Tested read, write and all erasers separately by The Raven. He did also provide the patch but refused to sign it off. Corresponding to flashrom svn r1796. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* sbxxx: Add spispeed parameterStefan Tauner2014-05-162-0/+44
| | | | | | | | | | | | | | | | | Allow to set the SPI clock frequency on AMD chipsets with a programmer parameter. If the parameter is given (and matches a possible value), the SPI clock is set temporarily. Both registers are restored on programmer shutdown. Example: ./flashrom -p internal:spispeed="33 MHz" -V Possible values for spispeed are "16.5 MHz", "22 MHz", "33 MHz", "66 MHz", "100 MHZ" and "800 kHz" depending on the chipset generation. Corresponding to flashrom svn r1795. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* sbxxx: Add support for new AMD SPI controllerWei Hu2014-05-163-10/+131
| | | | | | | | | | | | | | This patch adds support for the "SPI 100" SPI engine in Yangtze FCHs (found in Kabini and Temash). Tested reading/writing on ASRock IMB-A180 and PC Engines' APU board. Corresponding to flashrom svn r1794. Signed-off-by: Wei Hu <wei@aristanetworks.com> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* sbxxx: CleanupStefan Tauner2014-05-161-98/+88
| | | | | | | | | | | | | - Move programmer definition to the top. - Rewrite array accesses to use indices instead of using pointer arithmetic. - Move length check and opcode extraction to a function. - Move IMC parameter handling into existing IMC handling function. - Split comparing and resetting the FIFO pointer. Corresponding to flashrom svn r1793. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* AT45DB: fix read functionsStefan Tauner2014-05-161-4/+8
| | | | | | | | | | | | | | | | | | | | | | This fixes segfaults on reads (implicit reads on writes too), ouch. Thanks to The Raven for reporting the problem and testing my patch, and to Alexander Irenkov for providing a workable fix for it additionally. There were actually two problems: 1) The loop conditions were bogus which could lead to read errors (e.g. on implicit erase verifications). 2) The offset used within the read buffers provided to spi_nbyte_read() and memcpy() were not starting at 0 but the offset of the block within the flash chip (which has nothing to do with read buffer in most cases). This patch works similarly to Alexander's but is intended to be more readable. Corresponding to flashrom svn r1792. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Sanyo LE25FU406BJurij Munda2014-05-142-0/+32
| | | | | | | | | | | | | | It is very similar to LE25FW418A, except for HD_READ support (that is not implemented in flashrom anyway yet) and allowed voltage range. Probing, erasing, reading and writing has been tested. This chip is found on Seagate Constellation hard drives. Corresponding to flashrom svn r1791. Signed-off-by: Jurij Munda <jurij.munda@uni-mb.si> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine messages related to erase/write recoveryStefan Tauner2014-05-101-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | We are more verbose inside erase_and_write_flash() although it does not matter as much as at the end of the whole process in doit(). New output for the non-fatal (i.e. read-protected + successful recovery read) case: Reading old flash chip contents... done. Erasing and writing flash chip... spi_block_erase_d8 failed during command execution at address 0x8000 Reading current flash chip contents... done. spi_chip_erase_c7 failed during command execution FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! Corresponding to flashrom svn r1790. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add 'const' keyword to chip write and other function prototypesMark Marshall2014-05-0919-117/+82
| | | | | | | | | | Corresponding to flashrom svn r1789. Inspired by and mostly based on a patch Signed-off-by: Mark Marshall <mark.marshall@omicron.at> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Remove programmer_shutdown() from doit()Stefan Tauner2014-05-072-12/+10
| | | | | | | | | | | | | Because the programmer initialization that has to be called way earlier and independently elsewhere, it does not make a lot of sense to deinit within doit(). Also, free the logfile name at the end of main() to catch more execution paths and because this moves it to the other cleanup instructions. Corresponding to flashrom svn r1788. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for SST25LF020AIdwer Vollering2014-05-072-1/+34
| | | | | | | | | Tested on hardware by Idwer too. Corresponding to flashrom svn r1787. Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Support for Spansion S25FL132K and S25FL164KNikolay Martynov2014-05-042-0/+73
| | | | | | | | | Tested with actual S25FL164K via Arduino SPI. Corresponding to flashrom svn r1786. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for SST25WF080Jason Harper2014-05-042-4/+47
| | | | | | | | | | Also, refine status register prettyprinting and unlocking of the whole family. Corresponding to flashrom svn r1785. Signed-off-by: Jason Harper <jharper@iseis.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Macronix MX23L3254 mask ROMMichael Coppola2014-05-033-5/+23
| | | | | | | | Corresponding to flashrom svn r1784. Signed-off-by: Michael Coppola <michael.n.coppola@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 20Stefan Tauner2014-05-0312-74/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - abit BX6 2.0 Reported by Stefan Tauner - Acer EM61SM/EM61PM (used in Acer Aspire T180) Reported by Benjamin Bellec - ADLINK Express-HR Reported by Obermair Thomas - ASUS M3N-H/HDMI Reported by Franc Serres - Attro G5G100-P Reported by Christoph Grenz - ASRock 960GM-GS3 FX Reported by Fuley Istvan - Elitegroup P6BAP-A+ (V2.2) Reported by Arnaldo Pirrone - Elitegroup GeForce7050M-M (V2.0) Reported by Leif Middelschulte - Fujitsu D3041-A1 (used in ESPRIMO P2560) Reported by Daggi Duck - GIGABYTE GA-8S648 Reported by TeslaBIOS - GIGABYTE GA-970A-D3P (rev. 1.0) Reported by Jean-Francois Pirus - GIGABYTE GA-B85M-D3H Reported by Mladen Milinković - GIGABYTE GA-X79-UD3 Reported by Jeff O'Neil - GIGABYTE GA-X79-UP4 (rev. 1.0) Reported by George Spelvin - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3) Reported by Vangelis Skarmoutsos - GIGABYTE GA-Z87-HD3 Reported by virii5 - Lenovo Tilapia CRB Reported by jenkins56 on IRC - MSI GT60-2OD (notebook, only with layout patches) Reported by Vasiliy Vylegzhanin - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid) Reported by professorll - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640) Reported by Koen Rousseau - MSI MS-7125 (K8N Neo4(-F/FI/FX)) We had a board enable for that one for years, but it was not (and still is not) completely clear which boards are covered. - MSI MS-7522 (MSI X58 Pro-E) Reported by Gianluigi Tiesi - PCWARE APM80-D3 Reported by César Augusto Jakoby - Pegatron IPP7A-CP Reported by Илья Шипко - Supermicro H8QME-2 Reported by Greg Tippitt - Supermicro X7SPA-H Reported by Kyle Bentley - Supermicro X7SPE-HF-D525 Reported by Micah Anderson - Supermicro X8DTE Reported by Mark Nipper - Supermicro X8SIL-F Reported by Peter Samuelson - ZOTAC IONITX-A (-E) version Reported by Maciej Wroniecki NOT OK: - Supermicro X10SLM-F Reported by Micah Anderson Flash chips: - Atmel AT29C020 to PREW (+PREW) It was marked like that in the past, but I could not find the reason why the test bits were reset. Urja Rannikko tested it again and it still works. - Eon EN25F10 to PREW (+PREW) Reported by Stolmár Tamás - Eon EN25QH64 to PR (+PR) Reported by Vladimir 'φ-coder' Serbinenko - GigaDevice GD25Q32(B) to PREW (+PREW) Reported by mrnuke - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW) Reported by Jamie Nichol - Macronix MX25L2005(C) to PREW (+PREW) Reported by Давыдов Дмитрий - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW) Reported by Paolo Zambotti - Pmc Pm25LD010(C) to PREW (+PREW) Reported by Vasile Ceteras - Micron/Numonyx/ST M25P16 to PREW (+EW) Reported by raven - Micron/Numonyx/ST M25PX64 to PREW (+W) Reported by Zaolin - SST SST25VF020B to PREW (+PREW) Reported by Michaël Zweers - SST SST49LF040 to PREW (+W) Reported by Oskar Enoksson - Add support for MX25L3273E (evil twin of MX25L3205 et al.) Also, add MX25L1673 and MX25L6473E to the names of their twins and add a note about MX25L8073E. - Winbond W25X32 to PREW (+REW) Reported by The Raven - Winbond W29C010 etc. to PREW (+W) Reported by san Chipsets tested OK: - Intel NM70 (8086:1e5f) Reported by mrnuke - Intel C204 (8086:1c54) Reported by Vasiliy Vylegzhanin - Intel QM67 (8086:1c4f) Reported by Obermair Thomas - Intel HM77 (8086:1e57) Reported by Vasiliy Vylegzhanin - Intel B85 (8086:8c50) Reported by Mladen Milinković - Intel HM87 (8086:8c4b) Reported by Vasiliy Vylegzhanin - Intel Z87 (8086:8c44) Reported by virii5 - NVIDIA MCP51 (10de:0261) Reported by Marcin Kościelnicki - SiS 648 (1039:0648) Reported by TeslaBIOS Miscellaneous: - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_). - getrevision.sh: Ignore failing date calls. - getrevision.sh: Fix -u and -l for older git versions which require = for the git log grep parameter. - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas. - Add "-p internal" to output that requests users to send flashrom -V logs. - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist. - Tiny other stuff. Corresponding to flashrom svn r1783. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Make delay values unsignedStefan Tauner2014-05-026-22/+21
| | | | | | | | | | | | | | | There is no reason for negative delays in our use cases: - We don't need it (to work around any quirks). - sleep() (POSIX) uses an unsigned argument. - usleep() (POSIX) uses an unsigned argument. - Sleep() (Windows) uses an unsigned argument. Change all callees as well (without any complications). Corresponding to flashrom svn r1782. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* ft2232_spi: Add support for TUMPA LiteStefan Tauner2014-04-273-2/+12
| | | | | | | | | | | http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual Initial patch from Jadran Puharic <jpuharic@gmail.com>. Corresponding to flashrom svn r1781. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Report if we are not able to disable AAI mode againStefan Tauner2014-04-261-5/+9
| | | | | | | Corresponding to flashrom svn r1780. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 15:45:34 +0000