aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Fix duplicate 'const' declaration specifiersStefan Tauner2013-01-154-9/+9
| | | | | | | | | | Thanks to Idwer and clang for noticing these problems. Corresponding to flashrom svn r1646. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix compilation for DOS and non-x86 targetsCarl-Daniel Hailfinger2013-01-081-12/+7
| | | | | | | | | | Fixup for r1638. Thanks to Idwer Vollering for testing. Corresponding to flashrom svn r1645. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Decouple BAR reading from pci device init, handle errors gracefullyCarl-Daniel Hailfinger2013-01-0513-76/+109
| | | | | | | | | | | | | | | Pcidev_init() now returns struct pci_device * instead of a BAR stored in PCI config space. This allows for real error checking instead of having exit(1) everywhere in pcidev.c. Thanks to Niklas Söderlund for coming up with the original error handling patch which was slightly modified and folded into this patch. Move the declaration of struct pci_device in programmer.h before the first user. Corresponding to flashrom svn r1644. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce msg_*warnStefan Tauner2013-01-0411-44/+43
| | | | | | | | | | Also, unify all outputs of "Warning:" and "Error:" to use normal capitalization instead of mixing it with all capitals. Corresponding to flashrom svn r1643. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Unify PCI init and let pcidev clean itself upStefan Tauner2013-01-0413-41/+44
| | | | | | | | | | | | | | | | | | | Previously the internal programmer used its own code to initialize pcilib. This patch extracts the common code from the internal programmer and pcidev_init() into pcidev_init_common(). This fixes the non-existent PCI cleanup of the internal programmer and adds an additional safety by checking for an already existing PCI context. We got a nice shutdown function registration infrastructure, but did not use it very wisely. Instead we added shutdown functions to a myriad of programmers unnecessarily. In this patch we get rid of those that do only call pci_cleanup(pacc) by adding a shutdown function the pcidev.c itself that gets registered by pcidev_init(). Corresponding to flashrom svn r1642. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add user interface to activate the Bus Pirate pull-up resistorsBrian Salcedo2013-01-032-11/+40
| | | | | | | | | | | | | | | | | | | | | | | When working with some flash chips using the Bus Pirate programmer, the use of the Bus Pirate's on-board pull-up resistors is sometimes necessary. On v3 hardware the use of said pull-up resistors requires the user to apply a voltage to the VPU pin of the Bus Pirate, and then command it to use them. For v4 hardware which supports also fixed internal 3.3V and 5V sources no documentation could be found. Here is a link to information pertaining to what this patch does: http://dangerousprototypes.com/docs/SPI_(binary)#0100wxyz_-_Configure_peripherals_w.3Dpower.2C_x.3Dpull-ups.2C_y.3DAUX.2C_z.3DCS Bonus: small cleanup of superfluous stack variables. Corresponding to flashrom svn r1641. Signed-off-by: Brian Salcedo <bsalcedo@gmx.us> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Brian Salcedo <bsalcedo@gmx.us> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 16Stefan Tauner2013-01-0111-89/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - Acer V75-M (used in IBM Aptiva 2170-G http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html - ASRock 4CoreDual-VSTA with W39V040FB http://paste.flashrom.org/view.php?id=1446 - ASRock 775Dual-VSTA http://www.flashrom.org/pipermail/flashrom/2012-December/010294.html - ASRock E350M1/USB3 http://paste.flashrom.org/view.php?id=1465 - ASUS P5B-VM http://www.flashrom.org/pipermail/flashrom/2012-December/010351.html - ASUS SABERTOOTH 990FX R2.0 http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html - Elitegroup A928 (including a laptop whitelist board enable) http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html - EVGA 122-CK-NF68 Reported by Stephanie Daugherty on IRC http://paste.flashrom.org/view.php?id=1431 - GIGABYTE GA-A75M-UD2H Reported by Soul_keeper on IRC http://paste.flashrom.org/view.php?id=1490 - Intel D945GCNL Add board enable to override laptop detection too. http://www.flashrom.org/pipermail/flashrom/2012-December/010276.html - MSI G33M (MS-7357) http://www.flashrom.org/pipermail/flashrom/2012-October/010056.html - Shuttle FB61 http://www.flashrom.org/pipermail/flashrom/2012-November/010105.html - Tyan S4882 (Thunder K8QS Pro) Reported on IRC NOT OK: Alienware Aurora-R2 http://www.flashrom.org/pipermail/flashrom/2012-December/010225.html Biostar H61MU3 http://www.flashrom.org/pipermail/flashrom/2012-November/010144.html Dell OptiPlex 7010 http://paste.flashrom.org/view.php?id=1481 Intel DH67CL http://www.flashrom.org/pipermail/flashrom/2012-November/010112.html Supermicro X9DRT-HF+ http://www.flashrom.org/pipermail/flashrom/2012-November/010155.html Supermicro X9DRW http://www.flashrom.org/pipermail/flashrom/2012-November/010150.html Tested flash chips: - Atmel AT25FS010 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1484 - Eon EN25F64 to PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2012-December/010210.html - Spansion S25FL032A/P to PREW (+EW) http://paste.flashrom.org/view.php?id=1510 - ST M29F002T/NT to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-December/010300.html - Winbond W25X10 to PREW (+PREW) http://paste.flashrom.org/view.php?id=1486 Tested chipsets: - NVIDIA MCP78S http://www.flashrom.org/pipermail/flashrom/2012-November/010176.html - SiS 650 http://www.flashrom.org/pipermail/flashrom/2012-November/010119.html Miscellaneous: - Typo in GA-X58A-UDR3 (correct is GA-X58A-UD3R). - Force 2-digit hex numbers in prints were it makes sense. - Share code between enable_flash_sis530() and enable_flash_sis540(). - Some SST 25 series chips support both WRSR enable commands... - S25FL032A and S25FL064A share the IDs with their P versions, so rename them. - Fix a few memleaks in serprog. - Dediprog uses UINT_MAX so include limits.h (fixes the Windows build of dediprog) - Add (another) hint regarding the mandatory -p parameter to the manpage to make Debian bug #690478 happy. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690478 - Fix whitespace issues. - On shutdown, reset count of registered programmers (by Nico Huber) - Fix atahpt.c shutdown. The order of pcidev_init, register_shutdown and rpci_write_* is important! Thanks to Roy for reporting the problem and testing the fix. Corresponding to flashrom svn r1640. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Constify parameters and globalsNico Huber2012-12-304-8/+8
| | | | | | | | | | | This makes some stuff const (partially to get a more convenient libflashrom interface). Corresponding to flashrom svn r1639. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Simplify hwaccess.cPeter Lemenkov2012-12-291-68/+42
| | | | | | | | | | | | | | | | | | Previously the code was focused on architectures which led to lots of duplicate code and spread the information regarding differences between the architectures accross the file. With this patch there is a single function header for any function and the differentiation between architectures (and OS where needed) happens in one place for each function. Also, this patch adds simple defines to bundle often used arch and os checks. A central check for unknown architectures and OSes has been added on top. Corresponding to flashrom svn r1638. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Atmel's AT25F series of SPI flash chipsStefan Tauner2012-12-296-10/+250
| | | | | | | | | | | | | | | | | | This adds support for the following chips: - AT25F512, AT25F512A, AT25F512B - AT25F1024, AT25F1024A - AT25F2048 - AT25F4096 Besides the definitions of the the chips in flashchips.c this includes - a dedicated probing method (probe_spi_at25f) - pretty printing methods (spi_prettyprint_status_register_at25f*), and - unlocking methods (spi_disable_blockprotect_at25f*) Corresponding to flashrom svn r1637. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Intel S33 series flash chipsStefan Tauner2012-12-294-0/+265
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes: Bottom boot block: * 16Mb/2MB: QB25F160S33B8, QB25F016S33B8, QH25F160S33B8, QH25F016S33B8 * 32Mb/4MB: QB25F320S33B8, QH25F320S33B8 * 64Mb/8MB: QB25F640S33B8, QH25F640S33B8 Top boot block: * 16Mb/2MB: QB25F160S33T8, QB25F016S33T8, QH25F160S33T8, QH25F016S33T8 * 32Mb/4MB: QB25F320S33T8, QH25F320S33T8 * 64Mb/8MB: QB25F640S33T8, QH25F640S33T8 At least some seem to be marketed by other vendors (too?) but also with Intel's vendor ID. Besides a 0xC7 chip erase and a 0xD8 uniform 64kB block erase they support also erasing the top/bottom 8 8kB blocks with opcode 0x40. But since this command fails for all addresses outside those ranges, it is not easily implemented with flashrom's current code base and hence left out. Corresponding to flashrom svn r1636. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a generic SPI block unprotect functionStefan Tauner2012-12-291-109/+39
| | | | | | | | | | | This does not only remove a huge pile of duplicate code, it does also fix a bug in spi_disable_blockprotect_at25df(), which is also a good example why duplicated code is a bad idea. Corresponding to flashrom svn r1635. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Improve SPI status register pretty printingStefan Tauner2012-12-298-731/+760
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Move all functions related to SPI status registers to a new file spi25_statusreg.c. This includes the generic as well as the SST-specific functions from spi25.c and the chip-specific functions from a25.c and at25.c. - introduce helper functions * spi_prettyprint_status_register_hex() * spi_prettyprint_status_register_bpl() * spi_prettyprint_status_register_plain() Use the latter on every compatible flash chip that has no better printlock function set and get rid of the implicit pretty printing in the SPI probing functions. - remove * spi_prettyprint_status_register_common() * spi_prettyprint_status_register_amic_a25lq032() because it can be fully substituted with spi_prettyprint_status_register_amic_a25l032(). * spi_prettyprint_status_register() (old switch, no longer needed) - promote and export * spi_prettyprint_status_register_amic_a25l05p() as spi_prettyprint_status_register_default_bp1(). * spi_prettyprint_status_register_amic_a25l40p() as spi_prettyprint_status_register_default_bp2(). * spi_prettyprint_status_register_st_m25p() as spi_prettyprint_status_register_default_bp3(). - add #define TEST_BAD_REW and use it for a number of Atmel chips which had only TEST_BAD_READ set even though they dont have erasers or a write function set. Corresponding to flashrom svn r1634. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* print_wiki.c: print programmers of type OTHER tooStefan Tauner2012-12-271-0/+16
| | | | | | | Corresponding to flashrom svn r1633. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unify usbdev_status and pcidev_status into dev_entryStefan Tauner2012-12-2717-119/+72
| | | | | | | | | | | | | | | | | | | Once upon a time usbdev_status was created for the ft2232 programmer. Its IDs are semantically different to pcidev_status because they indicate USB instead of PCI IDs, but apart from that both data structures are equal. This change makes life easier for everything involved in handling and printing the status of devices that is noted in those structures by combining them into dev_entry. It is still possible to distinguish between PCI and USB devices indirectly by using the struct programmer's type field. Also, add a programmer column to the PCI and USB devices lists. Corresponding to flashrom svn r1632. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor PCI and USB device status printingStefan Tauner2012-12-276-193/+228
| | | | | | | | | | | | | | | | | To be able to get rid of lots of #ifdefs and centralize programmer-specific data more... - introduce two new fields to struct programmer_entry, namely enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status or char *note). - use those fields to generate device listings in print.c and print_wiki.c. Bonus: add printing of USB devices to print_wiki.c and count supported PCI and USB devices. Corresponding to flashrom svn r1631. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add general programmer sanity checksStefan Tauner2012-12-262-4/+29
| | | | | | | | | And remove the completely unused vendor field. Corresponding to flashrom svn r1630. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix memleaks in cli_classic.cStefan Tauner2012-12-262-1/+19
| | | | | | | | | | | | | | | | | | | Frees the memory allocated for the following strings - log file name - layout file name - image file name - programmer parameter (and reset the associated global variable in flashrom.c) Also, free the flashchip structs allocated by probe_flash. The layout image names were not fixed due to the pending layout patches. These bugs were found thanks to valgrind. Corresponding to flashrom svn r1629. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a "device" parameter for DediprogNathan Laredo2012-12-242-6/+45
| | | | | | | | | | | | | | | | | | | | | This patch adds a "device" parameter for Dediprog which enables use of multiple dediprogs connected to a single machine. Very handy for test racks. Example usage: flashrom -p dediprog:device=0 flashrom -p dediprog:device=1 etc... The patch was originally written by Nathan Laredo. Thanks to David Hendricks for submitting it upstream. Additional error handling, man page etc. by Stefan Tauner. Corresponding to flashrom svn r1628. Signed-off-by: Nathan Laredo <nil@google.com> Signed-off-by: David Hendricks <dhendrix@google.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fix sp_openserport users on WindowsStefan Tauner2012-11-303-3/+3
| | | | | | | Corresponding to flashrom svn r1627. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Break endless loop in serialport_write()Stefan Tauner2012-11-301-3/+11
| | | | | | | | | | | Serialport_write could loop endlessly when used with a seemingly valid port that does always return 0 on writes instead of an error. Give up after about 125 ms i.e. 250 tries with a period of 500 us. Corresponding to flashrom svn r1626. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Fix linker flag bug introduced in r1623Carl-Daniel Hailfinger2012-11-291-3/+3
| | | | | | | | | Spotted by Idwer Vollering. Corresponding to flashrom svn r1625. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Improve --help and friendsStefan Tauner2012-11-243-45/+35
| | | | | | | | | | More clear "variable" names, better explanation if no programmer is selected etc. Corresponding to flashrom svn r1624. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Explicitly detect libusb-0.1 in the MakefileCarl-Daniel Hailfinger2012-11-201-17/+50
| | | | | | | | | | Avoid funny interactions between libpci and libusb detection. Leave libftdi autodetection alone for now. Corresponding to flashrom svn r1623. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add (untested) board enable for Asus DSAN-DXStefan Tauner2012-11-052-0/+3
| | | | | | | | | | | IDs are from the host bridge and LPC controller. The enable function was reverse engineered by roxfan, thanks! User mezzo vanished without reporting any test results. Corresponding to flashrom svn r1622. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Support the new fast SPI mode present in Bus Pirate firmware v5.5 or newerCarl-Daniel Hailfinger2012-11-011-13/+77
| | | | | | | Corresponding to flashrom svn r1621. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for Winbond W39F010/W39L010/W39L020Kyösti Mälkki2012-10-284-0/+148
| | | | | | | | | | | | | | | | W39F010 is a 128kB parallel 5V flash chip, 16k bootblocks. W39L010 is a 128kB parallel 3.3V flash chip, 8k bootblocks. W39L020 is a 256kB parallel 3.3V flash chip, 64k/16k bootblocks. The W39F010 code was tested with a satasii programmer. The first write attempt after an erase returned with verify failure, but the second write attempt was succesful: http://paste.flashrom.org/view.php?id=1418 Corresponding to flashrom svn r1620. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Do not read the flash chip twice in verification modeStefan Tauner2012-10-273-53/+43
| | | | | | | | | | | | | | | | | | Kyösti Mälkki noticed that we unnecessarily read the flash chip twice when called with --verify. The first one is the mandatory read before everything (to be able to detect the seriousness of errors), but the second one is not necessary because we can just use the former for the comparison. This introduces a small output change: previously we printed ERASE or VERIFY depending on the callee. This special case has been dropped because it is unnecessary to print it (and wrong for the verification function to need to know why it is verifying exactly). If an erase fails we mention that fact explicitly already, similar for verify. Corresponding to flashrom svn r1619. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* serprog: add opcode to control the programmer's output driversStefan Tauner2012-10-273-1/+24
| | | | | | | | | | This allowed me to let the clips remain attached on my D946GZIS while playing with coreboot/serialice. Corresponding to flashrom svn r1618. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* serprog: move the macro list to its own header fileStefan Tauner2012-10-273-49/+26
| | | | | | | Corresponding to flashrom svn r1617. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Atmel AT26DF041Stefan Tauner2012-10-274-4/+102
| | | | | | | | | | | | | | | | | | Wicked chip: No WRSR, no write enable command (but swallows our default one without a problem), supports an auto-erasing page write (but even without that page writes are recommended to write the whole page i.e. operate on a completely erased page), mad requirements on block refreshments if only partly written. Found on my Intel D946GZIS and tested with my serprog in situ. Using the page write by setting JEDEC_BYTE_PROGRAM to 0x11 and using the spi_chip_write_256 command greatly improves performance and works flawlessly. Corresponding to flashrom svn r1616. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Numonyx N25Q016 and N25Q032Stefan Tauner2012-10-262-4/+109
| | | | | | | | | | | | | The 32Mb version has 1.8V and 3.0V versions, the smaller one 1.8V only (or Numonyx/Micron forgot to publish it). Another difference is that the 16Mb chip has 32 kB subsectors (erase opcode 0x52). As long as there are no funky configurations like for the 128Mb chips, we got the smaller parts covered with this change. Corresponding to flashrom svn r1615. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Remove exit calls from print_supported_chipsNiklas Söderlund2012-10-233-9/+12
| | | | | | | | | | | | Propagate the error code using return values instead, but let cli_classic.c still decide the ultimate return value of the process. Also, remove setting the ret value again after print_supported_wiki() - success is the default. Corresponding to flashrom svn r1614. Signed-off-by: Niklas Söderlund <niso@kth.se> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 15Stefan Tauner2012-10-209-43/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - Foxconn P55MX http://www.flashrom.org/pipermail/flashrom/2012-October/010002.html Tested flash chips: - Eon EN25F64 to PR (+PR) http://paste.flashrom.org/view.php?id=1426 - Macronix MX25L1005 to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-October/010004.html - Set SST39VF512 to PREW (+W) http://www.flashrom.org/pipermail/flashrom/2012-September/009958.html Tested chipsets: - Z77 (only reading was really tested) Miscellaneous: - Fix ft2232_spi's parameter parsing. - Fix nicrealtek's init (always segfaulted since r1586 oops). - Add another T60 variant to the laptop whitelist. - Improve message shown when image file size does not match flash chip - Refine messages regarding the flash descriptor override strap according to the findings by Vladislav Bykov on his P55MX. - Fix the ID of EN25F64. - Demote and clarify debug message in serprog_delay(). - Minor other cleanups. Corresponding to flashrom svn r1613. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Differentiate Numonyx N25Q064 1.8V and 3.0V versionsDavid Hendricks2012-10-042-3/+41
| | | | | | | | | | | | | | | | | | | | | | | This patch differentiates between the N25Q064 1.8V version and 3.0V version which have different JEDEC IDs. It extends the chip name to include more characters of the part number. The first two of those characters indicate the process technology (65nm) and feature set (hold pin etc.), neither of which matter for flashrom at the moment. The third and fourth characters specify voltage and block/sector size and uniformity, which are important and hence included. To abstract the irrelevant portions of the part number leading up to the characters we care about, dots are used. This helps prevent unwanted changes in chip name that can break fragile scripts and confuse people. More about this schema here: http://www.flashrom.org/pipermail/flashrom/2012-July/009595.html Corresponding to flashrom svn r1612. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for SST's 25WF series of SPI flash chipsStefan Tauner2012-10-011-0/+142
| | | | | | | | | | | | This includes SST25WF512, SST25WF010, SST25WF020 and SST25WF040. They require a VCC of 1.65 - 1.95V, which is why i could not test them. The SOIC version of the SST25WF512 is used on an AMD X300-based graphics card i own. Corresponding to flashrom svn r1611. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Cleanup ft2322.c and add more detail to error messagesStefan Tauner2012-09-261-27/+17
| | | | | | | | | | | - Use libftdi's error string to add more detail. - Add full stops to messages. - Minor white space fixes. Corresponding to flashrom svn r1610. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for FT232HIlya A. Volynets-Evenbakh2012-09-263-4/+27
| | | | | | | | | | | | For older versions of libftdi we define TYPE_232H ourselves and this seems to be enough to get at least basic support (and we don't need more than that AFAICT). Corresponding to flashrom svn r1609. Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for all 4 possible channels to the ft2232_spi programmerStefan Tauner2012-09-262-22/+44
| | | | | | | | | | | | | Add a check to validate the selected channel/interface, which not even libftdi seems to do yet. This patch changes default behavior: the new default channel/interface is A. Also, this patch uses the word 'channel' in addition or in place of 'interface' where possible without too much hassle because it is the term FTDI uses. Corresponding to flashrom svn r1608. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce a compile time option to select a default programmerStefan Tauner2012-09-252-5/+25
| | | | | | | | | | Heavily influenced by a discussion with (and based on code from) Peter Stuge. Please read the comment in the Makefile before using this option. Corresponding to flashrom svn r1607. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Peter Stuge <peter@stuge.se>
* Whitelist known working Thinkpads of the T60 and X60 seriesStefan Tauner2012-09-251-0/+13
| | | | | | | | | | | | | | This should get rid of the need to specify the laptop force parameter on T60 and X60 series Thinkpads (including T60s and X60s) that are using one of the Intel 94x northbridges and are known to have no interfering EC. Please note that although the EC is no problem, flashrom is not able to access the entire flash chip with the vendor BIOS, see the coreboot wiki for details: http://www.coreboot.org/Lenovo_x60x Corresponding to flashrom svn r1606. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
* Fix flashrom running on boards with corebootStefan Tauner2012-09-243-13/+19
| | | | | | | | | | | | | | In r1577 we removed the discrimination of coreboot IDs and user-specified mainboards. The problem is that the board enable code required to find a board enable if either of these model strings were set. Therefore boards running coreboot that do not need a board enable failed to execute flashrom since then. This patch fixes this by handling coreboot IDs and user-supplied IDs differently again. Corresponding to flashrom svn r1605. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Fix memleaks in dmi.cStefan Tauner2012-09-231-1/+14
| | | | | | | | | | | | | | | In dmi_init() we populate static char *dmistrings[] with values that get later compared in dmi_match(). Those strings are actually strduped in get_dmi_string() and hence need to be freed later. This patch accomplishes this by registering another shutdown method. Also, the tangling pointers are nulled when the memories are freed. This bug was found thanks to valgrind. Corresponding to flashrom svn r1604. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix a memleak in the dummyflasherStefan Tauner2012-09-221-2/+3
| | | | | | | | | | | Emu_persistent_image was not freed correctly. This bug was found thanks to valgrind. Corresponding to flashrom svn r1603. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Generify a25.c's SRWD printing function and move it to spi25.cStefan Tauner2012-09-223-15/+14
| | | | | | | Corresponding to flashrom svn r1602. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 14Stefan Tauner2012-09-2112-111/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested Mainboards: OK: - ASUS M3A78-EH http://www.flashrom.org/pipermail/flashrom/2010-October/005297.html - ASUS P2B-LS http://www.flashrom.org/pipermail/flashrom/2010-November/005506.html - Biostar TA790GX A3+ http://paste.flashrom.org/view.php?id=1350 - ECS 848P-A7 http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html - GIGABYTE GA-G41MT-S2PT Reported on IRC - GIGABYTE GA-H77-D3H Reported and tested by Alexander Gordeev on IRC. - Gigabyte GA-X79-UD5 http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html - Shuttle FN78S http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - VIA EITX-3000 Reported on IRC by Tuju NOT OK: - Dell PowerEdge C6220 (0HYFFG) http://www.flashrom.org/pipermail/flashrom/2012-September/009900.html - Foxconn Q45M http://www.flashrom.org/pipermail/flashrom/2012-September/009923.html - MSI MS-7309 (K9N6SGM-V) http://www.flashrom.org/pipermail/flashrom/2012-August/009712.html - Supermicro X9QRi-F+ http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - ZOTAC H61-ITX WiFi (H61ITX-A-E) http://www.flashrom.org/pipermail/flashrom/2012-August/009649.html ASUS CUSL2-C has been tested to be working with the board enable once implemented for the TUSL2-C board. They seem to have the same PCI IDs as shown in the links below. Since only the CUSL2-C board enable has been tested yet, we distinguish the two by DMI strings. http://paste.flashrom.org/view.php?id=1393 http://www.flashrom.org/pipermail/flashrom/attachments/20091206/ddca2c6c/attachment-0002.eml Tested flash chips: - Set EMST F25L008A to PREW (+PREW) http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html - Set GigaDevice GD25Q64 to PREW (+PREW) http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=9e8ef49b1f626c2197e131fba6c5b65c8af4eeea - Set Macronix MX25L12805 to P (+P) http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html - Set SST SST49LF003A/B to PREW (+EW) http://paste.flashrom.org/view.php?id=467 - Set Winbond W49V002FA to PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html Tested chipsets: - Intel X79 (0x1d41) http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html Board enables: - add ASUS P4P800-X Created by Idwer Vollering and tested by Mingsen Bao: http://paste.flashrom.org/view.php?id=467 - add DMI string to P4P800-VM Miscellaneous: - Add remaining Intel 7 series chipset (LPC) PCI IDs - Add generic SPI detection for chips from Winbond - Minor manpage changes - Minor other cleanups - Escape full stops after abbreviations in the manpage. - Add ICH9 and successors to spi_get_valid_read_addr Corresponding to flashrom svn r1601. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add spi_block_erase_62Stefan Tauner2012-09-214-0/+56
| | | | | | | | | | | | This is used by the AT25F series (only?), but is generic enough to reside in spi25.c. The only currently supported chip is the AT25F512B. Other members of that series need some additional infrastructure code, hence this patch adds the erase function to the AT25F512B only. Corresponding to flashrom svn r1600. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Allow to select FTDI device by serial numberShik Chen2012-09-172-1/+12
| | | | | | | | | | | | Requires libftdi > 0.5 (2004, commit ID a8f46ddc1595b1b07abfcce613acdafe5b8ddf9d). Idea stolen from chromiumos commit 5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68: http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68 Corresponding to flashrom svn r1599. Signed-off-by: Shik Chen <shik@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for GigaDevice GD25LQ32Bryan Freed2012-09-172-0/+38
| | | | | | | | | | | | | | | This is the low power version (vendor,device = 0xc8,0x6016) of GD25Q32 (0xc8,0x4016) which matches that of W25Q32 (0xef,0x4016) and W25Q32DW (0xef,0x6016). All their datasheets look pretty much the same with respect to commands, erase blocks, etc. Stolen from chromiumos: http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commitdiff;h=9a0051f0ba0b67af6f08e052c31cba3e9dbbbdbf Corresponding to flashrom svn r1598. Signed-off-by: Bryan Freed <bfreed@chromium.org> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add board enable for MSI K8N Neo PlatinumStefan Tauner2012-09-152-0/+3
| | | | | | | | | | | It's the same as for the Neo2. Thanks to roxfan and twice11 who did the RE! Corresponding to flashrom svn r1597. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Jud Porter Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 01:53:05 +0000