aboutsummaryrefslogtreecommitdiffstats
path: root/flash.h
Commit message (Collapse)AuthorAgeFilesLines
* Convince compilers to put constant data into the .rodata sectionMathias Krause2011-01-171-1/+1
| | | | | | | | | | | | | | | | This patch reduces the stack usage by declaring 'const' stack variables as 'static const' so they end up in the .rodata section instead of being copied from there to the stack for every invocation of the corresponding function. As a plus we end up in having a smaller binary as the "copy from .rodata to stack" code isn't emitted by the compiler any more (roughly -100 bytes). Corresponding to flashrom svn r1252. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Acked-by: Stefan Reinauer <stepan@coreboot.org>
* Support setting the Dediprog SF100 SPI voltageCarl-Daniel Hailfinger2010-11-091-0/+1
| | | | | | | | | | | Add a generic voltage parameter parser. Move tolower_string() from dummyflasher.c to flashrom.c to make it available everywhere. Corresponding to flashrom svn r1226. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coreboot.org>
* Add SPI flash emulation capability to the dummy programmerCarl-Daniel Hailfinger2010-11-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | You have to choose between - no emulation - ST M25P10.RES SPI flash chip (RES, page write) - SST SST25VF040.REMS SPI flash chip (REMS, byte write) - SST SST25VF032B SPI flash chip (RDID, AAI write) Example usage: flashrom -p dummy:emulate=SST25VF032B Flash image persistence is available as well. Example usage: flashrom -p dummy:image=dummy_simulator.rom Allow setting the max chunksize for page write with the dummy programmer. Example usage: flashrom -p dummy:spi_write_256_chunksize=5 Flash emulation is compiled in by default. This code helped me find and fix various bugs in the SPI write code as well as in the testsuite. Corresponding to flashrom svn r1220. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: David Hendricks <dhendrix@google.com>
* Add a reset to probe_jedec before we read the chip's IDsSean Nelson2010-10-201-0/+1
| | | | | | | | | | | | | | | | | | Previous probes might have had too short delays for entering ID mode, so the chip may still be in the process of entering the ID mode. Due to that, an additional delay before the reset makes sense. Add FEATURE_RESET_MASK to deal cleanly with those feature bits. Maciej Pijanka tested the patch and it fixes probing for him with some old Atmel chips. Corresponding to flashrom svn r1216. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Anders Juel Jensen <andersjjensen@gmail.com> Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Always read the flash chip before writingCarl-Daniel Hailfinger2010-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | This will allow flashrom to skip erase of already-erased blocks and to skip write of blocks which already have the wanted contents. Avoid emergency messages by checking if the chip contents after a failed write operation (erase/write) are unchanged. Keep the emergency messages after a failed pure erase. That part is debatable because if someone wants erase, he pretty sure doesn't care about the flash contents anymore. Please note that this introduces additional overhead of a full chip read before write. This is frowned upon by people with slow programmers. A followup patch will make this configurable. Corresponding to flashrom svn r1215. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coreboot.org>
* Switch all flash chips to partial writeCarl-Daniel Hailfinger2010-10-131-1/+1
| | | | | | | | | | | | | | | The inner write functions which handle partial write are renamed to the original name of their wrappers. The write wrappers are removed. Corresponding to flashrom svn r1211. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Tested-by: Andrew Morgan <ziltro@ziltro.com> Tested-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Fix timing of SPI status register writes (WRSR)Carl-Daniel Hailfinger2010-10-081-0/+3
| | | | | | | | | | | SPI write status register (WRSR) may take longer than 100 ms, and it makes sense to poll for completion in 10 ms steps until 5 s are over. This patch complements r1115. Corresponding to flashrom svn r1201. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Joshua Roys <roysjosh@gmail.com>
* Refine -L output to include all programmer modulesCarl-Daniel Hailfinger2010-10-061-0/+1
| | | | | | | | | | | Flashrom -L output did not contain a list of programmers nor were all programmers listed. Fix it and mention at least the name of each programmer. Wiki output is unchanged, and will need separate fixups. Corresponding to flashrom svn r1199. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Implement libpayload support and improve life for DOS based flashrom, tooPatrick Georgi2010-09-251-0/+2
| | | | | | | | | | | | | | Corresponding to flashrom svn r1181. Change the physmap* behaviour to use (void*)-1 as error code instead of NULL. That way, 1:1 mapped memory can be supported properly because (void*)0 is not a magic pointer anymore. (void*)-1 on the other hand is a rather unlikely memory offset, so that should be safe. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add detailed status register printing and unlocking for all ATMEL AT25* chipsCarl-Daniel Hailfinger2010-07-291-1/+5
| | | | | | | | | | | | | | Add support for Atmel AT25DF081A and AT25DQ161. Some chips require EWSR before WRSR, others require WREN before WRSR, and some support both variants. Add feature_bits to select the correct SPI command, and default to EWSR. Corresponding to flashrom svn r1115. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested-by: Steven Rosario Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-525/+0
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Convert MMIO accesses of non-internal PCI-based programmers to be ↵Carl-Daniel Hailfinger2010-07-271-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | endian-agnostic Convert all PCI-based external programmers to use special little-endian accessors for all MMIO regions of PCI devices. This patch does _not_ touch the internal programmer (which is PCI-based as well). Huge thanks go to Misha Manulis who worked with me to create a first version of this patch for the satasii programmer based on modification of generic code. Huge thanks also go to Segher Boessenkool for suggesting the pci_mmio_ prefix for the abstraction layer. NOTE to package maintainers: With this patch, compilation and usage of flashrom should be safe on x86, x86_64, MIPS (little and big endian) and PowerPC (big endian). The internal programmer is disabled on non-x86/x86_64 (but it compiles). The atahpt, nic3com, nicnatsemi, nicrealtek and rayer_spi can not be compiled on non-x86/x86_64 because port space I/O is not (yet) supported. Please compile with default settings on x86/x86_64 and with the following settings on all other architectures: make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no CONFIG_NICNATSEMI=no CONFIG_RAYER_SPI=no Corresponding to flashrom svn r1111. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Misha Manulis <misha@manulis.com>
* Fix compilation for CONFIG_INTERNAL=noMichael Karcher2010-07-241-0/+6
| | | | | | | | | Broken by r1098 Corresponding to flashrom svn r1104. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move SB600 SPI initialization to sb600spi.cMichael Karcher2010-07-221-1/+1
| | | | | | | Corresponding to flashrom svn r1099. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move Intel SPI initialisation to ichspi.cMichael Karcher2010-07-221-3/+6
| | | | | | | | | | | Smarter version could decide whether SPI is vital or not depending on straps. Straps are currently implemented for ICH7. EP80579 is in the comment, PCH of 5 Series/3400 Series has "LPC, reserved, PCI, SPI". Corresponding to flashrom svn r1098. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for RayeR SPIPGM hardware as described in ↵Carl-Daniel Hailfinger2010-07-211-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://rayer.ic.cz/elektro/spipgm.htm To use the RayeR driver, run flashrom -p rayer_spi -V Known bugs/limitations: - Won't compile/work on non-x86 architectures. - Will always use direct port I/O access. Log follows: flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 4.3.2, little endian Calibrating delay loop... OK. Initializing rayer_bitbang_spi programmer Using port 0x378 as I/O base for parallel port access. ... Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 ... Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 0xffe00000. ... No operations were specified. Corresponding to flashrom svn r1093. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Martin Rehak <rayer@seznam.cz> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Check during SPI bitbang init that SPI bitbang master configuration is correctCarl-Daniel Hailfinger2010-07-181-1/+1
| | | | | | | Corresponding to flashrom svn r1092. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use struct pointer instead of enum to set bitbang adapterMichael Karcher2010-07-171-5/+6
| | | | | | | Corresponding to flashrom svn r1091. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine SPI bitbangingCarl-Daniel Hailfinger2010-07-171-5/+1
| | | | | | | | | | | | | | | Change the SPI bitbanging core to fix a subtle bug (which had no effect so far) and to make integration of the RayeR SPIPGM and Nvidia MCP6x/MCP7x SPI patches easier. Kill a few global variables and require explicit initialization of bitbanging delay. A big to Johannes Sjölund for testing an earlier version of the code as part of the Nvidia MCP6x/MCP7x SPI bitbanging patch. Corresponding to flashrom svn r1085. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use the max_rom_decode infrastructure for wbsio_spiCarl-Daniel Hailfinger2010-07-141-1/+0
| | | | | | | | | Use this instead of the open-coding variant that only aborts after it is too late. Corresponding to flashrom svn r1081. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert SPI chips to partial writeCarl-Daniel Hailfinger2010-07-141-8/+9
| | | | | | | | | | However, wrap the write functions in a compat layer to allow converting the rest of flashrom later. Tested on Intel NM10 by David Hendricks. Corresponding to flashrom svn r1080. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Print an error message on read errors and abort instead of proceeding anywayCarl-Daniel Hailfinger2010-07-131-1/+1
| | | | | | | | | | | | | | | | | | Improve error checking in file write, chip read and chip verify. Refactor the read routines a bit to split reading from file writing. Log for a failed read: [...] Found chip "Winbond W25x16" (2048 KB, SPI) at physical address 0xffe00000. Reading flash... Invalid OPCODE 0x03 Read operation failed! FAILED. Corresponding to flashrom svn r1079. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stephen Kou <stephen@hyarros.com>
* Generify support for ITE IT8705 Super I/OCarl-Daniel Hailfinger2010-07-101-2/+2
| | | | | | | | | | | | | | | | | Autodetect the ITE IT8705 Super I/O and enable flash writes if it performs LPC->Parallel translation. Remove board enables which triggered the IT8705 write enable manually. Change the IT87 SPI special case to cover IT87 LPC->SPI and LPC->Parallel translation. Corresponding to flashrom svn r1073. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Tested on Syntax SV266A. Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested on Shuttle AK38N, all operations work fine. Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Unify programmer parameter extractionCarl-Daniel Hailfinger2010-07-081-1/+1
| | | | | | | | | | | Make programmer_param static by converting all users to extract_programmer_param. Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Corresponding to flashrom svn r1072. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various places in the flashrom source feature custom parameter extraction ↵Carl-Daniel Hailfinger2010-07-061-1/+1
| | | | | | | | | | | | | | | | | | | | from programmer_param This led to wildly differing syntax for programmer parameters, and it also voids pretty much every assumption you could make about programmer_param. The latter is a problem for libflashrom. Use extract_param everywhere, clean up related code and make it more foolproof. Add two instances of exit(1) where we have no option to return an error. Remove six instances of exit(1) where returning an error was possible. WARNING: This changes programmer parameter syntax for a few programmers! Corresponding to flashrom svn r1070. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Disable writes on default for known bad programmersCarl-Daniel Hailfinger2010-07-031-0/+1
| | | | | | | | | | | | | If a programmer has untested or non-working write/erase code, but probing/reading works, it makes sense to protect the user against write/erase accidents. This feature will be used by the Nvidia MCP SPI code, and it also might make sense for the gfxnvidia driver which has non-working write/erase. Corresponding to flashrom svn r1069. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-15/+15
| | | | | | | | | | | | | | | | | | | | | | | Constify variables where possible. Initialize programmer-related variables explicitly in programmer_init to allow running programmer_init from a clean state after programmer_shutdown. Prohibit registering programmer shutdown functions before init or after shutdown. Kill some dead code. Rename global variables with namespace-polluting names. Use a previously unused locking helper function in sst49lfxxxc.c. This is needed for libflashrom. Effects on the binary size of flashrom are minimal (300 bytes shrinkage), but the data section shrinks by 4384 bytes, and that's a good thing if flashrom is operating in constrained envionments. Corresponding to flashrom svn r1068. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add SPI chip read support to the dummy flasherCarl-Daniel Hailfinger2010-06-201-0/+1
| | | | | | | | | This allows using the dummy flasher for SPI read debugging. Corresponding to flashrom svn r1053. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* National Semiconductor DP83815/DP83816 and DP83820 NIC programmer supportAndrew Morgan2010-06-071-1/+12
| | | | | | | | | | Some instability remains, but that may be due to hardware problems in the specific card (Netgear FA311) used for testing. Corresponding to flashrom svn r1039. Signed-off-by: Andrew Morgan <ziltro@ziltro.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* board_enable.c: Remove useless 'name' parameterUwe Hermann2010-06-071-2/+2
| | | | | | | | | | | | Every board-enable function is passed a 'const char *name' (board name) which is totally useless as the board name was already printed by flashrom at that point. Also, 95% or so of the board-enables don't use the parameter anyway. So, drop it. Corresponding to flashrom svn r1037. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix wiki board enable parameter printingCarl-Daniel Hailfinger2010-06-071-6/+0
| | | | | | | | | | The logic was incorrect in one place which had && instead of ||. Move the board info #define B to the file where it is used. Corresponding to flashrom svn r1035. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Gcc and clang can check format strings of printf-like functionsCarl-Daniel Hailfinger2010-06-041-1/+2
| | | | | | | | | | | | Since we don't support any other compilers right now, enable that extension unconditionally. Fix the bugs found by format string checking. Corresponding to flashrom svn r1032. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Internal: introduce processor enables and abort if top/bottom alignment is ↵Carl-Daniel Hailfinger2010-06-041-0/+3
| | | | | | | | | | | | | | | | unknown The internal programmer needs correct information about flash_base and chip window top/bottom alignment on non-x86 before it can be used. Abort any internal programmer action for now until the code is fixed. Add the concept of a processor enable for systems where flashing is impacted by processor settings or processor model. Corresponding to flashrom svn r1031. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix fallout from r1021 which caused compile failures if only the dummy ↵Carl-Daniel Hailfinger2010-06-031-4/+1
| | | | | | | | | programmer was selected Corresponding to flashrom svn r1026. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Merge print.c and print_wiki.c board/URL tablesPeter Lemenkov2010-06-011-4/+14
| | | | | | | | | | Also, merge the tables in the output, i.e. there's only one table which contains both known-good and known-bad/untested boards. Corresponding to flashrom svn r1024. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* So far, we have up to 4 different names for the same thing (ignoring ↵Carl-Daniel Hailfinger2010-05-311-30/+30
| | | | | | | | | | | | | | | | | | | | | | capitalization) CONFIG_FT2232SPI (makefile config option) FT2232_SPI_SUPPORT (#define) ft2232spi (programmer name) ft2232_spi.c (programmer file) Use CONFIG_* with underscores for makefile config options and #defines and kill the useless _SUPPORT idiom. Use lowercase names with underscores for programmer names and programmer files. With this, you can run "grep -i ft2232_spi" and find everything related to the ft2232_spi driver. Same applies to all other programmers. Corresponding to flashrom svn r1023. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Remove unneeded #include statements completelyCarl-Daniel Hailfinger2010-05-301-3/+4
| | | | | | | | | | | | | | | Unistd.h was only used to get a definition of NULL in all files. Add our own NULL #define and remove unistd.h from flash.h stdio.h has no place in flash.h, it should be included only in files which really need it. Add #include statements in individual .c files where needed. Replace a few printf with msg_* to eliminate the need for stdio.h. Corresponding to flashrom svn r1021. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* ichspi: try harder to conform to address restrictionsCarl-Daniel Hailfinger2010-05-281-0/+2
| | | | | | | | | | | | | | ICH SPI can enforce address restrictions for all accesses which take an address (well, it could if the chipset implementation was not broken). Since exploiting the broken implementation is harder than conforming to the address restrictions wherever possible, conform to the address restrictions instead. This patch eliminates a lot of transaction errors people were seeing on chip probe. Corresponding to flashrom svn r1016. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Handle the following architectures in generic flashrom codeCarl-Daniel Hailfinger2010-05-261-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - x86/x86_64 (little endian) - PowerPC (big endian) - MIPS (big+little endian) No changes to programmer specific code. This means any drivers with MMIO access will _not_ suddenly start working on big endian systems, but with this patch everything is in place to fix them. Compilation should work on all architectures listed above for all drivers except nic3com and nicrealtek which require PCI Port IO which is x86-only for now. To compile without nic3com and nicrealtek, run make distclean make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no Thanks to Misha Manulis for testing early versions of this patch on PowerPC (big endian) with the satasii programmer. Thanks to Segher Boessenkool for design review and for helping out with compiler tricks and pointing out that we need eieio on PowerPC. Thanks to Vladimir Serbinenko for compile testing on MIPS (little endian) and PowerPC (big endian) and for runtime testing on MIPS (little endian). Thanks to David Daney for compile testing on MIPS (big endian). Thanks to Uwe Hermann for compile and runtime testing on x86_64. DO NOT RUN flashrom ON NON-X86 AFTER APPLYING THIS PATCH! This patch only provides the infrastructure, but does not convert any drivers, so flashrom will compile, but it won't do the right thing on non-x86 platforms. Corresponding to flashrom svn r1013. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Misha Manulis <misha@manulis.com> Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
* Support for Realtek RTL8139 network card flashingJoerg Fischer2010-05-211-1/+17
| | | | | | | Corresponding to flashrom svn r1002. Signed-off-by: Joerg Fischer <turboj@gmx.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix assorted documentation, frontend and printing bugsCarl-Daniel Hailfinger2010-05-151-0/+1
| | | | | | | | | | Change the command line interface to make file names positional. Add more sanity checks to the command line parser. Corresponding to flashrom svn r998. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* One of the problems is that --force had multiple meaningsCarl-Daniel Hailfinger2010-04-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Force chip read by faking probe success. - Force chip access even if the chip is bigger than max decode size for the flash bus. - Force erase even if erase is known bad. - Force write even if write is known bad. - Force writing even if cbtable tells us that this is the wrong image for this board. This patch cleans up --force usage: - Remove any suggestions to use --force for probe/read from flashrom output. - Don't talk about "success" or "Found chip" if the chip is forced. - Add a new internal programmer parameter boardmismatch=force. This overrides any mismatch detection from cbtable/image comparisons. - Add a new internal programmer parameter laptop=force_I_want_a_brick. - Adjust the documentation for --force. - Clean up the man page a bit whereever it talks about --force or laptops. Additional changes in this patch: - Add warnings about laptops to the documentation. - Abort if a laptop is detected. Can be overridden with the programmer parameter mentioned above. - Add "Portable" to the list of DMI strings indicating laptops. - Check if a chip specified with -c is known to flashrom. - Programmer parameter reliability and consistency fixes. - More paranoid self-checks. - Improve documentation. Corresponding to flashrom svn r996. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Intel 28F004/28F400 supportMichael Karcher2010-04-031-1/+1
| | | | | | | | | | | | | | | | | Remove blockwise write for i82802ab chips. It will be reintroduced in post-0.9.2 in a generic way. This is needed to fix FWH-like chips with non-uniform sectors. These are: Intel 28F001 Sharp LHF00L04 ST M50FW002 ST M50LPW116 Corresponding to flashrom svn r991. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Multibyte SPI write for the Bus PirateCarl-Daniel Hailfinger2010-03-221-0/+1
| | | | | | | Corresponding to flashrom svn r964. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Write granularity is chip specificCarl-Daniel Hailfinger2010-03-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | The following write granularities exist according to my datasheet survey: - 1 bit. Each bit can be cleared individually. - 1 byte. A byte can be written once. Further writes to an already written byte cause the contents to be either undefined or to stay unchanged. - 128 bytes. If less than 128 bytes are written, the rest will be erased. Each write to a 128-byte region will trigger an automatic erase before anything is written. Very uncommon behaviour. - 256 bytes. If less than 256 bytes are written, the contents of the unwritten bytes are undefined. Note that chips with default 256-byte writes, which keep the original contents for unwritten bytes, have a granularity of 1 byte. Handle 1-bit, 1-byte and 256-byte write granularity. Corresponding to flashrom svn r927. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: David Hendricks <dhendrix@google.com>
* Implement tested/untested status for board enablesMichael Karcher2010-02-281-0/+2
| | | | | | | | | | | | | | | The message printing code greatly exceed the 80 character limit. I can reformat it on request to obey the limit. Intended behaviour: on untested boards an explanation of that status is printed and the board enable code is not run, unless the option "boardenable=force" has been passed to the internal programmer. Corresponding to flashrom svn r919. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Warn if running on laptopsMichael Karcher2010-02-261-0/+1
| | | | | | | Corresponding to flashrom svn r916. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-2/+0
| | | | | | | | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Replace PCI_OK/PCI_NT by OK/NTMichael Karcher2010-02-241-2/+0
| | | | | | | | | | We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols are already there (defined for the chipset enable table). Corresponding to flashrom svn r911. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add initial (non-working) code for Highpoint ATA/RAID controllersUwe Hermann2010-02-211-1/+13
| | | | | | | | | | It's disabled by default. The current status is detailed at: http://www.flashrom.org/pipermail/flashrom/2010-January/001828.html Corresponding to flashrom svn r908. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>