1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2009,2010 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Driver for the SPIPGM hardware by "RayeR" Martin Rehak.
* See http://rayer.ic.cz/elektro/spipgm.htm for schematics and instructions.
*/
/* This driver uses non-portable direct I/O port accesses which won't work on
* any non-x86 platform, and even on x86 there is a high chance there will be
* collisions with any loaded parallel port drivers.
* The big advantage of direct port I/O is OS independence and speed because
* most OS parport drivers will perform many unnecessary accesses although
* this driver just treats the parallel port as a GPIO set.
*/
#if defined(__i386__) || defined(__x86_64__)
#include <stdlib.h>
#include "flash.h"
#include "programmer.h"
/* We have two sets of pins, out and in. The numbers for both sets are
* independent and are bitshift values, not real pin numbers.
*/
/* Pins for master->slave direction */
#define SPI_CS_PIN 5
#define SPI_SCK_PIN 6
#define SPI_MOSI_PIN 7
/* Pins for slave->master direction */
#define SPI_MISO_PIN 6
static uint16_t lpt_iobase;
/* Cached value of last byte sent. */
static uint8_t lpt_outbyte;
static void rayer_bitbang_set_cs(int val)
{
lpt_outbyte &= ~(1 << SPI_CS_PIN);
lpt_outbyte |= (val << SPI_CS_PIN);
OUTB(lpt_outbyte, lpt_iobase);
}
static void rayer_bitbang_set_sck(int val)
{
lpt_outbyte &= ~(1 << SPI_SCK_PIN);
lpt_outbyte |= (val << SPI_SCK_PIN);
OUTB(lpt_outbyte, lpt_iobase);
}
static void rayer_bitbang_set_mosi(int val)
{
lpt_outbyte &= ~(1 << SPI_MOSI_PIN);
lpt_outbyte |= (val << SPI_MOSI_PIN);
OUTB(lpt_outbyte, lpt_iobase);
}
static int rayer_bitbang_get_miso(void)
{
uint8_t tmp;
tmp = INB(lpt_iobase + 1);
tmp = (tmp >> SPI_MISO_PIN) & 0x1;
return tmp;
}
static const struct bitbang_spi_master bitbang_spi_master_rayer = {
.type = BITBANG_SPI_MASTER_RAYER,
.set_cs = rayer_bitbang_set_cs,
.set_sck = rayer_bitbang_set_sck,
.set_mosi = rayer_bitbang_set_mosi,
.get_miso = rayer_bitbang_get_miso,
};
int rayer_spi_init(void)
{
char *portpos = NULL;
/* Non-default port requested? */
portpos = extract_programmer_param("iobase");
if (portpos) {
char *endptr = NULL;
unsigned long tmp;
tmp = strtoul(portpos, &endptr, 0);
/* Port 0, port >0x10000, unaligned ports and garbage strings
* are rejected.
*/
if (!tmp || (tmp >= 0x10000) || (tmp & 0x3) ||
(*endptr != '\0')) {
/* Using ports below 0x100 is a really bad idea, and
* should only be done if no port between 0x100 and
* 0xfffc works due to routing issues.
*/
msg_perr("Error: iobase= specified, but the I/O base "
"given was invalid.\nIt must be a multiple of "
"0x4 and lie between 0x100 and 0xfffc.\n");
free(portpos);
return 1;
} else {
lpt_iobase = (uint16_t)tmp;
msg_pinfo("Non-default I/O base requested. This will "
"not change the hardware settings.\n");
}
} else {
/* Pick a default value for the I/O base. */
lpt_iobase = 0x378;
}
free(portpos);
msg_pdbg("Using address 0x%x as I/O base for parallel port access.\n",
lpt_iobase);
get_io_perms();
/* Get the initial value before writing to any line. */
lpt_outbyte = INB(lpt_iobase);
/* Zero halfperiod delay. */
if (bitbang_spi_init(&bitbang_spi_master_rayer, 0))
return 1;
return 0;
}
#else
#error PCI port I/O access is not supported on this architecture yet.
#endif
|
