Sync with the current state of mistral

3 files changed, 4 insertions, 200 deletions

diff --git a/mistral/arch.h b/mistral/arch.h
index 471b5251..9c38d5d2 100644
--- a/mistral/arch.h
+++ b/mistral/arch.h
@@ -562,7 +562,6 @@ struct Arch : BaseArch<ArchRanges>
 
     // -------------------------------------------------
 
-    void init_base_bitstream(); // base_bitstream.cc
     void build_bitstream();     // bitstream.cc
 };
 
diff --git a/mistral/base_bitstream.cc b/mistral/base_bitstream.cc
deleted file mode 100644
index 9fa74fb9..00000000
--- a/mistral/base_bitstream.cc
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  nextpnr -- Next Generation Place and Route
- *
- *  Copyright (C) 2021  gatecat <gatecat@ds0.me>
- *
- *  Permission to use, copy, modify, and/or distribute this software for any
- *  purpose with or without fee is hereby granted, provided that the above
- *  copyright notice and this permission notice appear in all copies.
- *
- *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "log.h"
-#include "nextpnr.h"
-
-NEXTPNR_NAMESPACE_BEGIN
-
-namespace {
-// Device-specific default config for the sx120f die
-void default_sx120f(CycloneV *cv)
-{
-    // Default PMA config?
-    cv->bmux_m_set(CycloneV::PMA3, CycloneV::xy2pos(0, 11), CycloneV::FFPLL_IQCLK_DIRECTION, 0, CycloneV::TRISTATE);
-    cv->bmux_m_set(CycloneV::PMA3, CycloneV::xy2pos(0, 11), CycloneV::FFPLL_IQCLK_DIRECTION, 1, CycloneV::TRISTATE);
-    cv->bmux_m_set(CycloneV::PMA3, CycloneV::xy2pos(0, 23), CycloneV::FFPLL_IQCLK_DIRECTION, 0, CycloneV::DOWN);
-    cv->bmux_m_set(CycloneV::PMA3, CycloneV::xy2pos(0, 23), CycloneV::FFPLL_IQCLK_DIRECTION, 1, CycloneV::UP);
-    cv->bmux_m_set(CycloneV::PMA3, CycloneV::xy2pos(0, 35), CycloneV::FFPLL_IQCLK_DIRECTION, 0, CycloneV::UP);
-    cv->bmux_m_set(CycloneV::PMA3, CycloneV::xy2pos(0, 35), CycloneV::FFPLL_IQCLK_DIRECTION, 1, CycloneV::UP);
-    cv->bmux_b_set(CycloneV::PMA3, CycloneV::xy2pos(0, 35), CycloneV::FPLL_DRV_EN, 0, 0);
-    cv->bmux_m_set(CycloneV::PMA3, CycloneV::xy2pos(0, 35), CycloneV::HCLK_TOP_OUT_DRIVER, 0, CycloneV::TRISTATE);
-    // Default PLL config
-    cv->bmux_b_set(CycloneV::FPLL, CycloneV::xy2pos(0, 73), CycloneV::PL_AUX_ATB_EN0, 0, 1);
-    cv->bmux_b_set(CycloneV::FPLL, CycloneV::xy2pos(0, 73), CycloneV::PL_AUX_ATB_EN0_PRECOMP, 0, 1);
-    cv->bmux_b_set(CycloneV::FPLL, CycloneV::xy2pos(0, 73), CycloneV::PL_AUX_ATB_EN1, 0, 1);
-    cv->bmux_b_set(CycloneV::FPLL, CycloneV::xy2pos(0, 73), CycloneV::PL_AUX_ATB_EN1_PRECOMP, 0, 1);
-    cv->bmux_b_set(CycloneV::FPLL, CycloneV::xy2pos(0, 73), CycloneV::PL_AUX_BG_KICKSTART, 0, 1);
-    cv->bmux_b_set(CycloneV::FPLL, CycloneV::xy2pos(0, 73), CycloneV::PL_AUX_VBGMON_POWERDOWN, 0, 1);
-    // Default TERM config
-    cv->bmux_b_set(CycloneV::TERM, CycloneV::xy2pos(89, 34), CycloneV::INTOSC_2_EN, 0, 0);
-
-    // TODO: what if these pins are used? where do these come from
-    for (int z = 0; z < 4; z++) {
-        cv->bmux_m_set(CycloneV::GPIO, CycloneV::xy2pos(89, 43), CycloneV::IOCSR_STD, z, CycloneV::NVR_LOW);
-        cv->bmux_m_set(CycloneV::GPIO, CycloneV::xy2pos(89, 66), CycloneV::IOCSR_STD, z, CycloneV::NVR_LOW);
-    }
-    for (int y : {38, 44, 51, 58, 65, 73, 79}) {
-        // TODO: Why only these upper DQS? is there a pattern?
-        cv->bmux_b_set(CycloneV::DQS16, CycloneV::xy2pos(89, y), CycloneV::RB_2X_CLK_DQS_INV, 0, 1);
-        cv->bmux_b_set(CycloneV::DQS16, CycloneV::xy2pos(89, y), CycloneV::RB_ACLR_LFIFO_EN, 0, 1);
-        cv->bmux_b_set(CycloneV::DQS16, CycloneV::xy2pos(89, y), CycloneV::RB_LFIFO_BYPASS, 0, 0);
-    }
-
-    // Discover these mux values using
-    //   grep 'i [_A-Z0-9.]* 1' empty.bt
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 12), 69), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 13), 4), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 34), 69), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 35), 4), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 37), 31), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 40), 43), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 46), 69), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 47), 43), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 53), 69), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 54), 4), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(0, 73), 68), true);
-
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 18), 66), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 20), 8), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 27), 69), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 28), 43), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 59), 66), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 61), 8), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 68), 69), true);
-    cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(9, 69), 43), true);
-
-    for (int z = 10; z <= 45; z++)
-        cv->inv_set(CycloneV::rnode(CycloneV::GOUT, CycloneV::xy2pos(51, 80), z), true);
-}
-} // namespace
-
-void Arch::init_base_bitstream()
-{
-    switch (cyclonev->current_model()->variant.die.type) {
-    case CycloneV::SX120F:
-        default_sx120f(cyclonev);
-        break;
-    default:
-        log_error("FIXME: die type %s currently unsupported for bitgen.\n",
-                  cyclonev->current_model()->variant.die.name);
-    }
-}
-
-NEXTPNR_NAMESPACE_END
diff --git a/mistral/bitstream.cc b/mistral/bitstream.cc
index eed508b3..b432be03 100644
--- a/mistral/bitstream.cc
+++ b/mistral/bitstream.cc
@@ -29,108 +29,13 @@ struct MistralBitgen
     Context *ctx;
     CycloneV *cv;
 
-    void init()
+    void options()
     {
-        ctx->init_base_bitstream();
-        // Default options
-        cv->opt_b_set(CycloneV::ALLOW_DEVICE_WIDE_OUTPUT_ENABLE_DIS, true);
-        if (!ctx->setting<bool>("compress_rbf", false))
+        if (!ctx->setting<bool>("compress_rbf", false)) {
             cv->opt_b_set(CycloneV::COMPRESSION_DIS, true);
-        cv->opt_n_set(CycloneV::CRC_DIVIDE_ORDER, 8);
-        cv->opt_b_set(CycloneV::CVP_CONF_DONE_EN, true);
-        cv->opt_b_set(CycloneV::DEVICE_WIDE_RESET_EN, true);
-        cv->opt_n_set(CycloneV::DRIVE_STRENGTH, 8);
-        cv->opt_b_set(CycloneV::IOCSR_READY_FROM_CSR_DONE_EN, true);
-        cv->opt_b_set(CycloneV::NCEO_DIS, true);
-        cv->opt_b_set(CycloneV::OCT_DONE_DIS, true);
-        cv->opt_r_set(CycloneV::OPT_A, 0x1dff);
-        if (!ctx->setting<bool>("compress_rbf", false))
             cv->opt_r_set(CycloneV::OPT_B, 0xffffff40adffffffULL);
-        else
+        } else
             cv->opt_r_set(CycloneV::OPT_B, 0xffffff402dffffffULL);
-        cv->opt_b_set(CycloneV::RELEASE_CLEARS_BEFORE_TRISTATES_DIS, true);
-        cv->opt_b_set(CycloneV::RETRY_CONFIG_ON_ERROR_EN, true);
-        cv->opt_r_set(CycloneV::START_UP_CLOCK, 0x3F);
-        // Default inversion
-        write_default_inv();
-    }
-
-    void write_default_inv()
-    {
-        // Some PNODEs are inverted by default. Set them up here.
-        for (const auto &pn2r : cv->get_all_p2r()) {
-            const auto &pn = pn2r.first;
-            auto pt = CycloneV::pn2pt(pn);
-            auto pi = CycloneV::pn2pi(pn);
-
-            switch (CycloneV::pn2bt(pn)) {
-            case CycloneV::HMC: {
-                // HMC OE are inverted to set OE=0, i.e. unused pins floating
-                // TODO: handle the case when we are using the HMC or HMC bypass
-                std::string name(CycloneV::port_type_names[pt]);
-                if (name.compare(0, 5, "IOINT") != 0 || name.compare(name.size() - 2, 2, "OE") != 0)
-                    continue;
-                cv->inv_set(pn2r.second, true);
-                break;
-            };
-            // HPS IO - TODO: what about when we actually support the HPS primitives?
-            case CycloneV::HPS_BOOT: {
-                switch (pt) {
-                case CycloneV::CSEL_EN:
-                case CycloneV::BSEL_EN:
-                case CycloneV::BOOT_FROM_FPGA_READY:
-                case CycloneV::BOOT_FROM_FPGA_ON_FAILURE:
-                    cv->inv_set(pn2r.second, true);
-                    break;
-                case CycloneV::CSEL:
-                    if (pi < 2)
-                        cv->inv_set(pn2r.second, true);
-                    break;
-                case CycloneV::BSEL:
-                    if (pi < 3)
-                        cv->inv_set(pn2r.second, true);
-                    break;
-                default:
-                    break;
-                };
-                break;
-            };
-            case CycloneV::HPS_CROSS_TRIGGER: {
-                if (pt == CycloneV::CLK_EN)
-                    cv->inv_set(pn2r.second, true);
-                break;
-            };
-            case CycloneV::HPS_TEST: {
-                if (pt == CycloneV::CFG_DFX_BYPASS_ENABLE)
-                    cv->inv_set(pn2r.second, true);
-                break;
-            };
-            case CycloneV::GPIO: {
-                // Ignore GPIO used by the design
-                BelId bel = ctx->bel_by_block_idx(CycloneV::pn2x(pn), CycloneV::pn2y(pn), id_MISTRAL_IO,
-                                                  CycloneV::pn2bi(pn));
-                if (bel != BelId() && ctx->getBoundBelCell(bel) != nullptr)
-                    continue;
-                // Bonded IO invert OEIN.1 which disables the output buffer and floats the IO
-                // Unbonded IO invert OEIN.0 which enables the output buffer, and {DATAIN.[0123]} to drive a constant
-                // GND, presumably for power/EMI reasons
-                bool is_bonded = cv->pin_find_pnode(pn) != nullptr;
-                if (is_bonded && (pt != CycloneV::OEIN || pi != 1))
-                    continue;
-                if (!is_bonded && (pt != CycloneV::DATAIN) && (pt != CycloneV::OEIN || pi != 0))
-                    continue;
-                cv->inv_set(pn2r.second, true);
-                break;
-            };
-            case CycloneV::FPLL: {
-                if (pt == CycloneV::EXTSWITCH0 || (pt == CycloneV::CLKEN && pi < 2))
-                    cv->inv_set(pn2r.second, true);
-                break;
-            };
-            default:
-                break;
-            }
-        }
     }
 
     void write_dqs()
@@ -392,7 +297,7 @@ struct MistralBitgen
     void run()
     {
         cv->clear();
-        init();
+        options();
         write_routing();
         write_dqs();
         write_cells();