Squelch trailing whitespace

2 files changed, 21 insertions, 21 deletions

diff --git a/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v b/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v
index c32984859..a65d0c991 100644
--- a/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v
+++ b/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v
@@ -16,7 +16,7 @@
  *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  *
  */
- 
+
 module VCC (output V);
    assign V = 1'b1;
 endmodule // VCC
@@ -37,23 +37,23 @@ module cycloneiv_io_obuf (output o, input i, input oe);
    assign oe = oe;
 endmodule // fiftyfivenm_io_obuf
 
-/* Altera MAX10 4-input non-fracturable LUT Primitive */ 
+/* Altera MAX10 4-input non-fracturable LUT Primitive */
 module cycloneiv_lcell_comb (output combout, cout,
                              input dataa, datab, datac, datad, cin);
 
 /* Internal parameters which define the behaviour
    of the LUT primitive.
    lut_mask define the lut function, can be expressed in 16-digit bin or hex.
-   sum_lutc_input define the type of LUT (combinational | arithmetic). 
+   sum_lutc_input define the type of LUT (combinational | arithmetic).
    dont_touch for retiming || carry options.
-   lpm_type for WYSIWYG */  
-   
+   lpm_type for WYSIWYG */
+
 parameter lut_mask = 16'hFFFF;
 parameter dont_touch = "off";
 parameter lpm_type = "cycloneiv_lcell_comb";
 parameter sum_lutc_input = "datac";
-  
-reg [1:0] lut_type;  
+
+reg [1:0] lut_type;
 reg cout_rt;
 reg combout_rt;
 wire dataa_w;
@@ -84,7 +84,7 @@ endfunction
 
 initial begin
     if (sum_lutc_input == "datac") lut_type = 0;
-    else 
+    else
     if (sum_lutc_input == "cin")   lut_type = 1;
     else begin
       $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input);
@@ -94,11 +94,11 @@ end
 
 always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin
     if (lut_type == 0) begin // logic function
-        combout_rt = lut_data(lut_mask, dataa_w, datab_w, 
+        combout_rt = lut_data(lut_mask, dataa_w, datab_w,
                             datac_w, datad_w);
     end
     else if (lut_type == 1) begin // arithmetic function
-        combout_rt = lut_data(lut_mask, dataa_w, datab_w, 
+        combout_rt = lut_data(lut_mask, dataa_w, datab_w,
                             cin_w, datad_w);
     end
     cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0);
@@ -111,17 +111,17 @@ endmodule // cycloneiv_lcell_comb
 
 /* Altera Cyclone IV Flip-Flop Primitive */
 // TODO: Implement advanced simulation functions
-module dffeas ( output q, 
-                input d, clk, clrn, prn, ena, 
+module dffeas ( output q,
+                input d, clk, clrn, prn, ena,
 		input asdata, aload, sclr, sload );
-  								     
+
 parameter power_up="dontcare";
 parameter is_wysiwyg="false";
   reg q;
 
   always @(posedge clk)
     q <= d;
-   
+
 endmodule
 
 
diff --git a/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v b/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v
index 9860647ae..e02332712 100644
--- a/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v
+++ b/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v
@@ -16,7 +16,7 @@
  *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  *
  */
- 
+
 // Flip-flop D
 module  \$_DFF_P_ (input D, input C, output Q);
    parameter WYSIWYG="TRUE";
@@ -26,12 +26,12 @@ endmodule //
 // Input buffer map
 module \$__inpad (input I, output O);
     cycloneiv_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0));
-endmodule 
+endmodule
 
-// Output buffer map   
+// Output buffer map
 module \$__outpad (input I, output O);
     cycloneiv_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1));
-endmodule 
+endmodule
 
 // LUT Map
 /* 0 -> datac
@@ -41,14 +41,14 @@ module \$lut (A, Y);
    parameter LUT    = 0;
    input [WIDTH-1:0] A;
    output 	     Y;
-   generate 
+   generate
       if (WIDTH == 1) begin
 	   assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function
       end else
       if (WIDTH == 2) begin
            cycloneiv_lcell_comb #(.lut_mask({4{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1));
       end else
-      if(WIDTH == 3) begin 
+      if(WIDTH == 3) begin
 	   cycloneiv_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1));
       end else
       if(WIDTH == 4) begin
@@ -58,4 +58,4 @@ module \$lut (A, Y);
    endgenerate
 endmodule //
 
-	    
+