Basic test for checking correct synthesis of SystemVerilog interfaces

5 files changed, 327 insertions, 0 deletions

diff --git a/tests/svinterfaces/run-test.sh b/tests/svinterfaces/run-test.sh
new file mode 100755
index 000000000..1630859bd
--- /dev/null
+++ b/tests/svinterfaces/run-test.sh
@@ -0,0 +1,5 @@
+#/bin/bash -e
+
+
+
+./runone.sh  svinterface1
diff --git a/tests/svinterfaces/runone.sh b/tests/svinterfaces/runone.sh
new file mode 100755
index 000000000..345801389
--- /dev/null
+++ b/tests/svinterfaces/runone.sh
@@ -0,0 +1,41 @@
+#!/bin/bash
+
+
+TESTNAME=$1
+
+STDOUTFILE=${TESTNAME}.log_stdout
+STDERRFILE=${TESTNAME}.log_stderr
+
+echo "" > $STDOUTFILE
+echo "" > $STDERRFILE
+
+echo -n "Test: ${TESTNAME} -> "
+
+$PWD/../../yosys -p "read_verilog -sv ${TESTNAME}.sv ; hierarchy -check -top TopModule ; synth ; write_verilog ${TESTNAME}_syn.v" >> $STDOUTFILE >> $STDERRFILE
+$PWD/../../yosys -p "read_verilog -sv ${TESTNAME}_ref.v ; hierarchy -check -top TopModule ; synth ; write_verilog ${TESTNAME}_ref_syn.v" >> $STDOUTFILE >> $STDERRFILE
+
+rm -f a.out reference_result.txt dut_result.txt
+
+set -e
+
+iverilog -g2012 ${TESTNAME}_syn.v
+iverilog -g2012 ${TESTNAME}_ref_syn.v
+
+set +e
+
+iverilog -g2012 ${TESTNAME}_tb.v ${TESTNAME}_ref_syn.v
+./a.out
+mv output.txt reference_result.txt
+iverilog -g2012 ${TESTNAME}_tb.v ${TESTNAME}_syn.v
+./a.out
+mv output.txt dut_result.txt
+
+diff reference_result.txt dut_result.txt > ${TESTNAME}.diff
+RET=$?
+if [ "$RET" != "0" ] ; then
+    echo "ERROR!"
+    exit -1
+fi
+
+echo "ok"
+exit 0
diff --git a/tests/svinterfaces/svinterface1.sv b/tests/svinterfaces/svinterface1.sv
new file mode 100644
index 000000000..6d60b4880
--- /dev/null
+++ b/tests/svinterfaces/svinterface1.sv
@@ -0,0 +1,117 @@
+
+
+module TopModule(
+    input logic clk,
+    input logic rst,
+    output logic [21:0] outOther,
+    input logic [1:0] sig,
+    input logic flip,
+    output logic [1:0] sig_out,
+    output logic [15:0] passThrough);
+
+  MyInterface #(.WIDTH(4)) MyInterfaceInstance();
+
+  SubModule1 u_SubModule1 (
+    .clk(clk),
+    .rst(rst),
+    .u_MyInterface(MyInterfaceInstance),
+    .outOther(outOther),
+    .sig (sig)
+  );
+
+  assign sig_out = MyInterfaceInstance.mysig_out;
+
+
+  assign MyInterfaceInstance.setting = flip;
+
+  assign passThrough = MyInterfaceInstance.passThrough;
+
+endmodule
+
+interface MyInterface #(
+  parameter WIDTH = 3)(
+  );
+
+  logic setting;
+  logic [WIDTH-1:0] other_setting;
+
+  logic [1:0] mysig_out;
+
+  logic [15:0] passThrough;
+
+    modport submodule1 (
+        input  setting,
+        output other_setting,
+        output mysig_out,
+        output passThrough
+    );
+
+    modport submodule2 (
+        input  setting,
+        output other_setting,
+        input  mysig_out,
+        output passThrough
+    );
+
+endinterface
+
+
+module SubModule1(
+    input logic clk,
+    input logic rst,
+    MyInterface.submodule1 u_MyInterface,
+    input logic [1:0] sig,
+    output logic [21:0] outOther
+
+  );
+
+  always_ff @(posedge clk or posedge rst)
+    if(rst)
+      u_MyInterface.mysig_out <= 0;
+    else begin
+      if(u_MyInterface.setting)
+        u_MyInterface.mysig_out <= sig;
+      else
+        u_MyInterface.mysig_out <= ~sig;
+    end
+
+  MyInterface #(.WIDTH(22)) MyInterfaceInstanceInSub();
+
+  SubModule2 u_SubModule2 (
+    .clk(clk),
+    .rst(rst),
+    .u_MyInterfaceInSub2(u_MyInterface),
+    .u_MyInterfaceInSub3(MyInterfaceInstanceInSub)
+  );
+
+    assign outOther = MyInterfaceInstanceInSub.other_setting;
+
+    assign MyInterfaceInstanceInSub.setting = 0;
+    assign MyInterfaceInstanceInSub.mysig_out = sig;
+
+endmodule
+
+module SubModule2(
+
+    input logic clk,
+    input logic rst,
+    MyInterface.submodule2 u_MyInterfaceInSub2,
+    MyInterface.submodule2 u_MyInterfaceInSub3
+
+  );
+
+   always_comb begin
+      if (u_MyInterfaceInSub3.mysig_out == 2'b00)
+        u_MyInterfaceInSub3.other_setting[21:0] = 1000;
+      else if (u_MyInterfaceInSub3.mysig_out == 2'b01)
+        u_MyInterfaceInSub3.other_setting[21:0] = 2000;
+      else if (u_MyInterfaceInSub3.mysig_out == 2'b10)
+        u_MyInterfaceInSub3.other_setting[21:0] = 3000;
+      else
+        u_MyInterfaceInSub3.other_setting[21:0] = 4000;
+   end
+
+    assign u_MyInterfaceInSub2.passThrough[7:0] = 124;
+    assign u_MyInterfaceInSub2.passThrough[15:8] = 200;
+
+endmodule
diff --git a/tests/svinterfaces/svinterface1_ref.v b/tests/svinterfaces/svinterface1_ref.v
new file mode 100644
index 000000000..b119f4037
--- /dev/null
+++ b/tests/svinterfaces/svinterface1_ref.v
@@ -0,0 +1,107 @@
+
+module TopModule(
+    input logic clk,
+    input logic rst,
+    input logic [1:0] sig,
+    input logic flip,
+    output logic [15:0] passThrough,
+    output logic [21:0] outOther,
+    output logic [1:0] sig_out);
+
+
+    logic MyInterfaceInstance_setting;
+    logic [3:0] MyInterfaceInstance_other_setting;
+    logic [1:0] MyInterfaceInstance_mysig_out;
+
+  SubModule1 u_SubModule1 (
+    .clk(clk),
+    .rst(rst),
+    .u_MyInterface_setting(MyInterfaceInstance_setting),
+    .u_MyInterface_mysig_out(MyInterfaceInstance_mysig_out),
+    .u_MyInterface_other_setting(MyInterfaceInstance_other_setting),
+    .outOther(outOther),
+    .passThrough (passThrough),
+    .sig (sig)
+  );
+
+  assign sig_out = MyInterfaceInstance_mysig_out;
+
+
+  assign MyInterfaceInstance_setting = flip;
+
+endmodule
+
+
+module SubModule1(
+    input logic clk,
+    input logic rst,
+    input logic u_MyInterface_setting,
+    output logic [3:0] u_MyInterface_other_setting,
+    output logic [1:0] u_MyInterface_mysig_out,
+    output logic [21:0] outOther,
+    input logic [1:0] sig,
+    output logic [15:0] passThrough
+  );
+
+  always @(posedge clk or posedge rst)
+    if(rst)
+      u_MyInterface_mysig_out <= 0;
+    else begin
+      if(u_MyInterface_setting)
+        u_MyInterface_mysig_out <= sig;
+      else
+        u_MyInterface_mysig_out <= ~sig;
+    end
+
+    logic MyInterfaceInstanceInSub_setting;
+    logic [21:0] MyInterfaceInstanceInSub_other_setting;
+    logic [1:0] MyInterfaceInstanceInSub_mysig_out;
+
+
+  SubModule2 u_SubModule2 (
+    .clk(clk),
+    .rst(rst),
+    .u_MyInterfaceInSub2_setting(u_MyInterface_setting),
+    .u_MyInterfaceInSub2_mysig_out(u_MyInterface_mysig_out),
+    .u_MyInterfaceInSub2_other_setting(u_MyInterface_other_setting),
+    .u_MyInterfaceInSub3_setting(MyInterfaceInstanceInSub_setting),
+    .u_MyInterfaceInSub3_mysig_out(MyInterfaceInstanceInSub_mysig_out),
+    .u_MyInterfaceInSub3_other_setting(MyInterfaceInstanceInSub_other_setting),
+    .passThrough (passThrough)
+  );
+    assign outOther = MyInterfaceInstanceInSub_other_setting;
+
+    assign MyInterfaceInstanceInSub_setting = 0;
+    assign MyInterfaceInstanceInSub_mysig_out = sig;
+
+endmodule
+
+module SubModule2(
+
+    input logic clk,
+    input logic rst,
+    input logic u_MyInterfaceInSub2_setting,
+    output logic [3:0] u_MyInterfaceInSub2_other_setting,
+    input  logic [1:0] u_MyInterfaceInSub2_mysig_out,
+    input logic u_MyInterfaceInSub3_setting,
+    output logic [21:0] u_MyInterfaceInSub3_other_setting,
+    input  logic [1:0] u_MyInterfaceInSub3_mysig_out,
+    output logic [15:0] passThrough
+
+  );
+
+    always @(u_MyInterfaceInSub3_mysig_out) begin
+      if (u_MyInterfaceInSub3_mysig_out == 2'b00)
+        u_MyInterfaceInSub3_other_setting[21:0] = 1000;
+      else if (u_MyInterfaceInSub3_mysig_out == 2'b01)
+        u_MyInterfaceInSub3_other_setting[21:0] = 2000;
+      else if (u_MyInterfaceInSub3_mysig_out == 2'b10)
+        u_MyInterfaceInSub3_other_setting[21:0] = 3000;
+      else
+        u_MyInterfaceInSub3_other_setting[21:0] = 4000;
+    end
+
+    assign passThrough[7:0] = 124;
+    assign passThrough[15:8] = 200;
+
+endmodule
diff --git a/tests/svinterfaces/svinterface1_tb.v b/tests/svinterfaces/svinterface1_tb.v
new file mode 100644
index 000000000..44c3b5f68
--- /dev/null
+++ b/tests/svinterfaces/svinterface1_tb.v
@@ -0,0 +1,57 @@
+`timescale 1ns/10ps
+
+module svinterface1_tb;
+
+
+  logic clk;
+  logic rst;
+  logic [21:0] outOther;
+  logic [1:0] sig;
+  logic [1:0] sig_out;
+  logic flip;
+  logic [15:0] passThrough;
+  integer outfile;
+
+  TopModule u_dut (
+    .clk(clk),
+    .rst(rst),
+    .outOther(outOther),
+    .sig(sig),
+    .flip(flip),
+    .passThrough(passThrough),
+    .sig_out(sig_out)
+  );
+
+  initial begin
+    clk = 0;
+    while(1) begin
+      clk = ~clk;
+      #50;
+    end
+  end
+
+  initial begin
+    outfile = $fopen("output.txt");
+    rst = 1;
+    sig = 0;
+    flip = 0;
+    @(posedge clk);
+    #(2);
+    rst = 0;
+    @(posedge clk);
+    for(int j=0;j<2;j++) begin
+      for(int i=0;i<20;i++) begin
+        #(2);
+        flip = j;
+        sig = i;
+        @(posedge clk);
+      end
+    end
+    $finish;
+  end
+
+  always @(negedge clk) begin
+    $fdisplay(outfile, "%d %d %d", outOther, sig_out, passThrough);
+  end
+
+endmodule