diff options
Diffstat (limited to 'techlibs/altera_intel/lpm_functions.v')
| -rw-r--r-- | techlibs/altera_intel/lpm_functions.v | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/techlibs/altera_intel/lpm_functions.v b/techlibs/altera_intel/lpm_functions.v new file mode 100644 index 000000000..20dbf4a02 --- /dev/null +++ b/techlibs/altera_intel/lpm_functions.v @@ -0,0 +1,319 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +// NOTE: This is still WIP. +(* techmap_celltype = "$altpll" *) +module _80_altpll_altera ( input [1:0] inclk, + input fbin, + input pllena, + input clkswitch, + input areset, + input pfdena, + input clkena, + input extclkena, + input scanclk, + input scanaclr, + input scanclkena, + input scanread, + input scanwrite, + input scandata, + input phasecounterselect, + input phaseupdown, + input phasestep, + input configupdate, + inout fbmimicbidir, + + output [width_clock-1:0] clk, + output [3:0] extclk, + output [1:0] clkbad, + output enable0, + output enable1, + output activeclock, + output clkloss, + output locked, + output scandataout, + output scandone, + output sclkout0, + output sclkout1, + output phasedone, + output vcooverrange, + output vcounderrange, + output fbout, + output fref, + output icdrclk ); + + parameter intended_device_family = "MAX 10"; + parameter operation_mode = "NORMAL"; + parameter pll_type = "AUTO"; + parameter qualify_conf_done = "OFF"; + parameter compensate_clock = "CLK0"; + parameter scan_chain = "LONG"; + parameter primary_clock = "inclk0"; + parameter inclk0_input_frequency = 1000; + parameter inclk1_input_frequency = 0; + parameter gate_lock_signal = "NO"; + parameter gate_lock_counter = 0; + parameter lock_high = 1; + parameter lock_low = 0; + parameter valid_lock_multiplier = 1; + parameter invalid_lock_multiplier = 5; + parameter switch_over_type = "AUTO"; + parameter switch_over_on_lossclk = "OFF" ; + parameter switch_over_on_gated_lock = "OFF" ; + parameter enable_switch_over_counter = "OFF"; + parameter switch_over_counter = 0; + parameter feedback_source = "EXTCLK0" ; + parameter bandwidth = 0; + parameter bandwidth_type = "UNUSED"; + parameter lpm_hint = "UNUSED"; + parameter spread_frequency = 0; + parameter down_spread = "0.0"; + parameter self_reset_on_gated_loss_lock = "OFF"; + parameter self_reset_on_loss_lock = "OFF"; + parameter lock_window_ui = "0.05"; + parameter width_clock = 6; + parameter width_phasecounterselect = 4; + parameter charge_pump_current_bits = 9999; + parameter loop_filter_c_bits = 9999; + parameter loop_filter_r_bits = 9999; + parameter scan_chain_mif_file = "UNUSED"; + parameter clk9_multiply_by = 1; + parameter clk8_multiply_by = 1; + parameter clk7_multiply_by = 1; + parameter clk6_multiply_by = 1; + parameter clk5_multiply_by = 1; + parameter clk4_multiply_by = 1; + parameter clk3_multiply_by = 1; + parameter clk2_multiply_by = 1; + parameter clk1_multiply_by = 1; + parameter clk0_multiply_by = 1; + parameter clk9_divide_by = 1; + parameter clk8_divide_by = 1; + parameter clk7_divide_by = 1; + parameter clk6_divide_by = 1; + parameter clk5_divide_by = 1; + parameter clk4_divide_by = 1; + parameter clk3_divide_by = 1; + parameter clk2_divide_by = 1; + parameter clk1_divide_by = 1; + parameter clk0_divide_by = 1; + parameter clk9_phase_shift = "0"; + parameter clk8_phase_shift = "0"; + parameter clk7_phase_shift = "0"; + parameter clk6_phase_shift = "0"; + parameter clk5_phase_shift = "0"; + parameter clk4_phase_shift = "0"; + parameter clk3_phase_shift = "0"; + parameter clk2_phase_shift = "0"; + parameter clk1_phase_shift = "0"; + parameter clk0_phase_shift = "0"; + + parameter clk9_duty_cycle = 50; + parameter clk8_duty_cycle = 50; + parameter clk7_duty_cycle = 50; + parameter clk6_duty_cycle = 50; + parameter clk5_duty_cycle = 50; + parameter clk4_duty_cycle = 50; + parameter clk3_duty_cycle = 50; + parameter clk2_duty_cycle = 50; + parameter clk1_duty_cycle = 50; + parameter clk0_duty_cycle = 50; + + parameter clk9_use_even_counter_mode = "OFF"; + parameter clk8_use_even_counter_mode = "OFF"; + parameter clk7_use_even_counter_mode = "OFF"; + parameter clk6_use_even_counter_mode = "OFF"; + parameter clk5_use_even_counter_mode = "OFF"; + parameter clk4_use_even_counter_mode = "OFF"; + parameter clk3_use_even_counter_mode = "OFF"; + parameter clk2_use_even_counter_mode = "OFF"; + parameter clk1_use_even_counter_mode = "OFF"; + parameter clk0_use_even_counter_mode = "OFF"; + parameter clk9_use_even_counter_value = "OFF"; + parameter clk8_use_even_counter_value = "OFF"; + parameter clk7_use_even_counter_value = "OFF"; + parameter clk6_use_even_counter_value = "OFF"; + parameter clk5_use_even_counter_value = "OFF"; + parameter clk4_use_even_counter_value = "OFF"; + parameter clk3_use_even_counter_value = "OFF"; + parameter clk2_use_even_counter_value = "OFF"; + parameter clk1_use_even_counter_value = "OFF"; + parameter clk0_use_even_counter_value = "OFF"; + + parameter clk2_output_frequency = 0; + parameter clk1_output_frequency = 0; + parameter clk0_output_frequency = 0; + + parameter vco_min = 0; + parameter vco_max = 0; + parameter vco_center = 0; + parameter pfd_min = 0; + parameter pfd_max = 0; + parameter m_initial = 1; + parameter m = 0; + parameter n = 1; + parameter m2 = 1; + parameter n2 = 1; + parameter ss = 0; + parameter l0_high = 1; + parameter l1_high = 1; + parameter g0_high = 1; + parameter g1_high = 1; + parameter g2_high = 1; + parameter g3_high = 1; + parameter e0_high = 1; + parameter e1_high = 1; + parameter e2_high = 1; + parameter e3_high = 1; + parameter l0_low = 1; + parameter l1_low = 1; + parameter g0_low = 1; + parameter g1_low = 1; + parameter g2_low = 1; + parameter g3_low = 1; + parameter e0_low = 1; + parameter e1_low = 1; + parameter e2_low = 1; + parameter e3_low = 1; + parameter l0_initial = 1; + parameter l1_initial = 1; + parameter g0_initial = 1; + parameter g1_initial = 1; + parameter g2_initial = 1; + parameter g3_initial = 1; + parameter e0_initial = 1; + parameter e1_initial = 1; + parameter e2_initial = 1; + parameter e3_initial = 1; + parameter l0_mode = "bypass"; + parameter l1_mode = "bypass"; + parameter g0_mode = "bypass"; + parameter g1_mode = "bypass"; + parameter g2_mode = "bypass"; + parameter g3_mode = "bypass"; + parameter e0_mode = "bypass"; + parameter e1_mode = "bypass"; + parameter e2_mode = "bypass"; + parameter e3_mode = "bypass"; + parameter l0_ph = 0; + parameter l1_ph = 0; + parameter g0_ph = 0; + parameter g1_ph = 0; + parameter g2_ph = 0; + parameter g3_ph = 0; + parameter e0_ph = 0; + parameter e1_ph = 0; + parameter e2_ph = 0; + parameter e3_ph = 0; + parameter m_ph = 0; + parameter l0_time_delay = 0; + parameter l1_time_delay = 0; + parameter g0_time_delay = 0; + parameter g1_time_delay = 0; + parameter g2_time_delay = 0; + parameter g3_time_delay = 0; + parameter e0_time_delay = 0; + parameter e1_time_delay = 0; + parameter e2_time_delay = 0; + parameter e3_time_delay = 0; + parameter m_time_delay = 0; + parameter n_time_delay = 0; + parameter extclk3_counter = "e3" ; + parameter extclk2_counter = "e2" ; + parameter extclk1_counter = "e1" ; + parameter extclk0_counter = "e0" ; + parameter clk9_counter = "c9" ; + parameter clk8_counter = "c8" ; + parameter clk7_counter = "c7" ; + parameter clk6_counter = "c6" ; + parameter clk5_counter = "l1" ; + parameter clk4_counter = "l0" ; + parameter clk3_counter = "g3" ; + parameter clk2_counter = "g2" ; + parameter clk1_counter = "g1" ; + parameter clk0_counter = "g0" ; + parameter enable0_counter = "l0"; + parameter enable1_counter = "l0"; + parameter charge_pump_current = 2; + parameter loop_filter_r = "1.0"; + parameter loop_filter_c = 5; + parameter vco_post_scale = 0; + parameter vco_frequency_control = "AUTO"; + parameter vco_phase_shift_step = 0; + parameter lpm_type = "altpll"; + + parameter port_clkena0 = "PORT_CONNECTIVITY"; + parameter port_clkena1 = "PORT_CONNECTIVITY"; + parameter port_clkena2 = "PORT_CONNECTIVITY"; + parameter port_clkena3 = "PORT_CONNECTIVITY"; + parameter port_clkena4 = "PORT_CONNECTIVITY"; + parameter port_clkena5 = "PORT_CONNECTIVITY"; + parameter port_extclkena0 = "PORT_CONNECTIVITY"; + parameter port_extclkena1 = "PORT_CONNECTIVITY"; + parameter port_extclkena2 = "PORT_CONNECTIVITY"; + parameter port_extclkena3 = "PORT_CONNECTIVITY"; + parameter port_extclk0 = "PORT_CONNECTIVITY"; + parameter port_extclk1 = "PORT_CONNECTIVITY"; + parameter port_extclk2 = "PORT_CONNECTIVITY"; + parameter port_extclk3 = "PORT_CONNECTIVITY"; + parameter port_clk0 = "PORT_CONNECTIVITY"; + parameter port_clk1 = "PORT_CONNECTIVITY"; + parameter port_clk2 = "PORT_CONNECTIVITY"; + parameter port_clk3 = "PORT_CONNECTIVITY"; + parameter port_clk4 = "PORT_CONNECTIVITY"; + parameter port_clk5 = "PORT_CONNECTIVITY"; + parameter port_clk6 = "PORT_CONNECTIVITY"; + parameter port_clk7 = "PORT_CONNECTIVITY"; + parameter port_clk8 = "PORT_CONNECTIVITY"; + parameter port_clk9 = "PORT_CONNECTIVITY"; + parameter port_scandata = "PORT_CONNECTIVITY"; + parameter port_scandataout = "PORT_CONNECTIVITY"; + parameter port_scandone = "PORT_CONNECTIVITY"; + parameter port_sclkout1 = "PORT_CONNECTIVITY"; + parameter port_sclkout0 = "PORT_CONNECTIVITY"; + parameter port_clkbad0 = "PORT_CONNECTIVITY"; + parameter port_clkbad1 = "PORT_CONNECTIVITY"; + parameter port_activeclock = "PORT_CONNECTIVITY"; + parameter port_clkloss = "PORT_CONNECTIVITY"; + parameter port_inclk1 = "PORT_CONNECTIVITY"; + parameter port_inclk0 = "PORT_CONNECTIVITY"; + parameter port_fbin = "PORT_CONNECTIVITY"; + parameter port_fbout = "PORT_CONNECTIVITY"; + parameter port_pllena = "PORT_CONNECTIVITY"; + parameter port_clkswitch = "PORT_CONNECTIVITY"; + parameter port_areset = "PORT_CONNECTIVITY"; + parameter port_pfdena = "PORT_CONNECTIVITY"; + parameter port_scanclk = "PORT_CONNECTIVITY"; + parameter port_scanaclr = "PORT_CONNECTIVITY"; + parameter port_scanread = "PORT_CONNECTIVITY"; + parameter port_scanwrite = "PORT_CONNECTIVITY"; + parameter port_enable0 = "PORT_CONNECTIVITY"; + parameter port_enable1 = "PORT_CONNECTIVITY"; + parameter port_locked = "PORT_CONNECTIVITY"; + parameter port_configupdate = "PORT_CONNECTIVITY"; + parameter port_phasecounterselect = "PORT_CONNECTIVITY"; + parameter port_phasedone = "PORT_CONNECTIVITY"; + parameter port_phasestep = "PORT_CONNECTIVITY"; + parameter port_phaseupdown = "PORT_CONNECTIVITY"; + parameter port_vcooverrange = "PORT_CONNECTIVITY"; + parameter port_vcounderrange = "PORT_CONNECTIVITY"; + parameter port_scanclkena = "PORT_CONNECTIVITY"; + parameter using_fbmimicbidir_port = "ON"; + +endmodule
\ No newline at end of file |