aboutsummaryrefslogtreecommitdiffstats
path: root/techlibs/altera_intel/lpm_functions.v
diff options
context:
space:
mode:
Diffstat (limited to 'techlibs/altera_intel/lpm_functions.v')
-rw-r--r--techlibs/altera_intel/lpm_functions.v319
1 files changed, 0 insertions, 319 deletions
diff --git a/techlibs/altera_intel/lpm_functions.v b/techlibs/altera_intel/lpm_functions.v
deleted file mode 100644
index b4d02dcb9..000000000
--- a/techlibs/altera_intel/lpm_functions.v
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * yosys -- Yosys Open SYnthesis Suite
- *
- * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-// NOTE: This is still WIP.
-(* techmap_celltype = "$altpll" *)
-module _80_altpll_altera ( input [1:0] inclk,
- input fbin,
- input pllena,
- input clkswitch,
- input areset,
- input pfdena,
- input clkena,
- input extclkena,
- input scanclk,
- input scanaclr,
- input scanclkena,
- input scanread,
- input scanwrite,
- input scandata,
- input phasecounterselect,
- input phaseupdown,
- input phasestep,
- input configupdate,
- inout fbmimicbidir,
-
- output [width_clock-1:0] clk,
- output [3:0] extclk,
- output [1:0] clkbad,
- output enable0,
- output enable1,
- output activeclock,
- output clkloss,
- output locked,
- output scandataout,
- output scandone,
- output sclkout0,
- output sclkout1,
- output phasedone,
- output vcooverrange,
- output vcounderrange,
- output fbout,
- output fref,
- output icdrclk );
-
- parameter intended_device_family = "MAX 10";
- parameter operation_mode = "NORMAL";
- parameter pll_type = "AUTO";
- parameter qualify_conf_done = "OFF";
- parameter compensate_clock = "CLK0";
- parameter scan_chain = "LONG";
- parameter primary_clock = "inclk0";
- parameter inclk0_input_frequency = 1000;
- parameter inclk1_input_frequency = 0;
- parameter gate_lock_signal = "NO";
- parameter gate_lock_counter = 0;
- parameter lock_high = 1;
- parameter lock_low = 0;
- parameter valid_lock_multiplier = 1;
- parameter invalid_lock_multiplier = 5;
- parameter switch_over_type = "AUTO";
- parameter switch_over_on_lossclk = "OFF" ;
- parameter switch_over_on_gated_lock = "OFF" ;
- parameter enable_switch_over_counter = "OFF";
- parameter switch_over_counter = 0;
- parameter feedback_source = "EXTCLK0" ;
- parameter bandwidth = 0;
- parameter bandwidth_type = "UNUSED";
- parameter lpm_hint = "UNUSED";
- parameter spread_frequency = 0;
- parameter down_spread = "0.0";
- parameter self_reset_on_gated_loss_lock = "OFF";
- parameter self_reset_on_loss_lock = "OFF";
- parameter lock_window_ui = "0.05";
- parameter width_clock = 6;
- parameter width_phasecounterselect = 4;
- parameter charge_pump_current_bits = 9999;
- parameter loop_filter_c_bits = 9999;
- parameter loop_filter_r_bits = 9999;
- parameter scan_chain_mif_file = "UNUSED";
- parameter clk9_multiply_by = 1;
- parameter clk8_multiply_by = 1;
- parameter clk7_multiply_by = 1;
- parameter clk6_multiply_by = 1;
- parameter clk5_multiply_by = 1;
- parameter clk4_multiply_by = 1;
- parameter clk3_multiply_by = 1;
- parameter clk2_multiply_by = 1;
- parameter clk1_multiply_by = 1;
- parameter clk0_multiply_by = 1;
- parameter clk9_divide_by = 1;
- parameter clk8_divide_by = 1;
- parameter clk7_divide_by = 1;
- parameter clk6_divide_by = 1;
- parameter clk5_divide_by = 1;
- parameter clk4_divide_by = 1;
- parameter clk3_divide_by = 1;
- parameter clk2_divide_by = 1;
- parameter clk1_divide_by = 1;
- parameter clk0_divide_by = 1;
- parameter clk9_phase_shift = "0";
- parameter clk8_phase_shift = "0";
- parameter clk7_phase_shift = "0";
- parameter clk6_phase_shift = "0";
- parameter clk5_phase_shift = "0";
- parameter clk4_phase_shift = "0";
- parameter clk3_phase_shift = "0";
- parameter clk2_phase_shift = "0";
- parameter clk1_phase_shift = "0";
- parameter clk0_phase_shift = "0";
-
- parameter clk9_duty_cycle = 50;
- parameter clk8_duty_cycle = 50;
- parameter clk7_duty_cycle = 50;
- parameter clk6_duty_cycle = 50;
- parameter clk5_duty_cycle = 50;
- parameter clk4_duty_cycle = 50;
- parameter clk3_duty_cycle = 50;
- parameter clk2_duty_cycle = 50;
- parameter clk1_duty_cycle = 50;
- parameter clk0_duty_cycle = 50;
-
- parameter clk9_use_even_counter_mode = "OFF";
- parameter clk8_use_even_counter_mode = "OFF";
- parameter clk7_use_even_counter_mode = "OFF";
- parameter clk6_use_even_counter_mode = "OFF";
- parameter clk5_use_even_counter_mode = "OFF";
- parameter clk4_use_even_counter_mode = "OFF";
- parameter clk3_use_even_counter_mode = "OFF";
- parameter clk2_use_even_counter_mode = "OFF";
- parameter clk1_use_even_counter_mode = "OFF";
- parameter clk0_use_even_counter_mode = "OFF";
- parameter clk9_use_even_counter_value = "OFF";
- parameter clk8_use_even_counter_value = "OFF";
- parameter clk7_use_even_counter_value = "OFF";
- parameter clk6_use_even_counter_value = "OFF";
- parameter clk5_use_even_counter_value = "OFF";
- parameter clk4_use_even_counter_value = "OFF";
- parameter clk3_use_even_counter_value = "OFF";
- parameter clk2_use_even_counter_value = "OFF";
- parameter clk1_use_even_counter_value = "OFF";
- parameter clk0_use_even_counter_value = "OFF";
-
- parameter clk2_output_frequency = 0;
- parameter clk1_output_frequency = 0;
- parameter clk0_output_frequency = 0;
-
- parameter vco_min = 0;
- parameter vco_max = 0;
- parameter vco_center = 0;
- parameter pfd_min = 0;
- parameter pfd_max = 0;
- parameter m_initial = 1;
- parameter m = 0;
- parameter n = 1;
- parameter m2 = 1;
- parameter n2 = 1;
- parameter ss = 0;
- parameter l0_high = 1;
- parameter l1_high = 1;
- parameter g0_high = 1;
- parameter g1_high = 1;
- parameter g2_high = 1;
- parameter g3_high = 1;
- parameter e0_high = 1;
- parameter e1_high = 1;
- parameter e2_high = 1;
- parameter e3_high = 1;
- parameter l0_low = 1;
- parameter l1_low = 1;
- parameter g0_low = 1;
- parameter g1_low = 1;
- parameter g2_low = 1;
- parameter g3_low = 1;
- parameter e0_low = 1;
- parameter e1_low = 1;
- parameter e2_low = 1;
- parameter e3_low = 1;
- parameter l0_initial = 1;
- parameter l1_initial = 1;
- parameter g0_initial = 1;
- parameter g1_initial = 1;
- parameter g2_initial = 1;
- parameter g3_initial = 1;
- parameter e0_initial = 1;
- parameter e1_initial = 1;
- parameter e2_initial = 1;
- parameter e3_initial = 1;
- parameter l0_mode = "bypass";
- parameter l1_mode = "bypass";
- parameter g0_mode = "bypass";
- parameter g1_mode = "bypass";
- parameter g2_mode = "bypass";
- parameter g3_mode = "bypass";
- parameter e0_mode = "bypass";
- parameter e1_mode = "bypass";
- parameter e2_mode = "bypass";
- parameter e3_mode = "bypass";
- parameter l0_ph = 0;
- parameter l1_ph = 0;
- parameter g0_ph = 0;
- parameter g1_ph = 0;
- parameter g2_ph = 0;
- parameter g3_ph = 0;
- parameter e0_ph = 0;
- parameter e1_ph = 0;
- parameter e2_ph = 0;
- parameter e3_ph = 0;
- parameter m_ph = 0;
- parameter l0_time_delay = 0;
- parameter l1_time_delay = 0;
- parameter g0_time_delay = 0;
- parameter g1_time_delay = 0;
- parameter g2_time_delay = 0;
- parameter g3_time_delay = 0;
- parameter e0_time_delay = 0;
- parameter e1_time_delay = 0;
- parameter e2_time_delay = 0;
- parameter e3_time_delay = 0;
- parameter m_time_delay = 0;
- parameter n_time_delay = 0;
- parameter extclk3_counter = "e3" ;
- parameter extclk2_counter = "e2" ;
- parameter extclk1_counter = "e1" ;
- parameter extclk0_counter = "e0" ;
- parameter clk9_counter = "c9" ;
- parameter clk8_counter = "c8" ;
- parameter clk7_counter = "c7" ;
- parameter clk6_counter = "c6" ;
- parameter clk5_counter = "l1" ;
- parameter clk4_counter = "l0" ;
- parameter clk3_counter = "g3" ;
- parameter clk2_counter = "g2" ;
- parameter clk1_counter = "g1" ;
- parameter clk0_counter = "g0" ;
- parameter enable0_counter = "l0";
- parameter enable1_counter = "l0";
- parameter charge_pump_current = 2;
- parameter loop_filter_r = "1.0";
- parameter loop_filter_c = 5;
- parameter vco_post_scale = 0;
- parameter vco_frequency_control = "AUTO";
- parameter vco_phase_shift_step = 0;
- parameter lpm_type = "altpll";
-
- parameter port_clkena0 = "PORT_CONNECTIVITY";
- parameter port_clkena1 = "PORT_CONNECTIVITY";
- parameter port_clkena2 = "PORT_CONNECTIVITY";
- parameter port_clkena3 = "PORT_CONNECTIVITY";
- parameter port_clkena4 = "PORT_CONNECTIVITY";
- parameter port_clkena5 = "PORT_CONNECTIVITY";
- parameter port_extclkena0 = "PORT_CONNECTIVITY";
- parameter port_extclkena1 = "PORT_CONNECTIVITY";
- parameter port_extclkena2 = "PORT_CONNECTIVITY";
- parameter port_extclkena3 = "PORT_CONNECTIVITY";
- parameter port_extclk0 = "PORT_CONNECTIVITY";
- parameter port_extclk1 = "PORT_CONNECTIVITY";
- parameter port_extclk2 = "PORT_CONNECTIVITY";
- parameter port_extclk3 = "PORT_CONNECTIVITY";
- parameter port_clk0 = "PORT_CONNECTIVITY";
- parameter port_clk1 = "PORT_CONNECTIVITY";
- parameter port_clk2 = "PORT_CONNECTIVITY";
- parameter port_clk3 = "PORT_CONNECTIVITY";
- parameter port_clk4 = "PORT_CONNECTIVITY";
- parameter port_clk5 = "PORT_CONNECTIVITY";
- parameter port_clk6 = "PORT_CONNECTIVITY";
- parameter port_clk7 = "PORT_CONNECTIVITY";
- parameter port_clk8 = "PORT_CONNECTIVITY";
- parameter port_clk9 = "PORT_CONNECTIVITY";
- parameter port_scandata = "PORT_CONNECTIVITY";
- parameter port_scandataout = "PORT_CONNECTIVITY";
- parameter port_scandone = "PORT_CONNECTIVITY";
- parameter port_sclkout1 = "PORT_CONNECTIVITY";
- parameter port_sclkout0 = "PORT_CONNECTIVITY";
- parameter port_clkbad0 = "PORT_CONNECTIVITY";
- parameter port_clkbad1 = "PORT_CONNECTIVITY";
- parameter port_activeclock = "PORT_CONNECTIVITY";
- parameter port_clkloss = "PORT_CONNECTIVITY";
- parameter port_inclk1 = "PORT_CONNECTIVITY";
- parameter port_inclk0 = "PORT_CONNECTIVITY";
- parameter port_fbin = "PORT_CONNECTIVITY";
- parameter port_fbout = "PORT_CONNECTIVITY";
- parameter port_pllena = "PORT_CONNECTIVITY";
- parameter port_clkswitch = "PORT_CONNECTIVITY";
- parameter port_areset = "PORT_CONNECTIVITY";
- parameter port_pfdena = "PORT_CONNECTIVITY";
- parameter port_scanclk = "PORT_CONNECTIVITY";
- parameter port_scanaclr = "PORT_CONNECTIVITY";
- parameter port_scanread = "PORT_CONNECTIVITY";
- parameter port_scanwrite = "PORT_CONNECTIVITY";
- parameter port_enable0 = "PORT_CONNECTIVITY";
- parameter port_enable1 = "PORT_CONNECTIVITY";
- parameter port_locked = "PORT_CONNECTIVITY";
- parameter port_configupdate = "PORT_CONNECTIVITY";
- parameter port_phasecounterselect = "PORT_CONNECTIVITY";
- parameter port_phasedone = "PORT_CONNECTIVITY";
- parameter port_phasestep = "PORT_CONNECTIVITY";
- parameter port_phaseupdown = "PORT_CONNECTIVITY";
- parameter port_vcooverrange = "PORT_CONNECTIVITY";
- parameter port_vcounderrange = "PORT_CONNECTIVITY";
- parameter port_scanclkena = "PORT_CONNECTIVITY";
- parameter using_fbmimicbidir_port = "ON";
-
-endmodule
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-19 17:13:23 +0000