diff options
Diffstat (limited to 'techlibs/xilinx/xc6s_ff_map.v')
| -rw-r--r-- | techlibs/xilinx/xc6s_ff_map.v | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/techlibs/xilinx/xc6s_ff_map.v b/techlibs/xilinx/xc6s_ff_map.v new file mode 100644 index 000000000..bf35b09e5 --- /dev/null +++ b/techlibs/xilinx/xc6s_ff_map.v @@ -0,0 +1,162 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +// ============================================================================ +// FF mapping for Spartan 6. The primitives used are the same as Series 7, +// but with one major difference: the initial value is implied by the +// primitive type used (FFs with reset pin must have INIT set to 0 or x, FFs +// with set pin must have INIT set to 1 or x). For Yosys primitives without +// set/reset, this means we have to pick the primitive type based on the INIT +// value. + +`ifndef _NO_FFS + +module \$_DFF_N_ (input D, C, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + FDSE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .S(1'b0)); + else + FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFF_P_ (input D, C, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + FDSE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .S(1'b0)); + else + FDRE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .R(1'b0)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +module \$_DFFE_NP_ (input D, C, E, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + FDSE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S(1'b0)); + else + FDRE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(1'b0)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFFE_PP_ (input D, C, E, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + FDSE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .S(1'b0)); + else + FDRE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(E), .R(1'b0)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +module \$_DFF_NN0_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + $error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1"); + else + FDCE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(!R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFF_NP0_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + $error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1"); + else + FDCE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR( R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFF_PN0_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + $error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1"); + else + FDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR(!R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFF_PP0_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + $error("Spartan 6 doesn't support FFs with asynchronous reset initialized to 1"); + else + FDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .CLR( R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +module \$_DFF_NN1_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b0) + $error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0"); + else + FDPE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(!R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFF_NP1_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b0) + $error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0"); + else + FDPE_1 #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE( R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFF_PN1_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b0) + $error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0"); + else + FDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE(!R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DFF_PP1_ (input D, C, R, output Q); + parameter [0:0] _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b0) + $error("Spartan 6 doesn't support FFs with asynchronous set initialized to 0"); + else + FDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .C(C), .CE(1'b1), .PRE( R)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +module \$_DLATCH_N_ (input E, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + LDPE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .PRE(1'b0)); + else + LDCE #(.INIT(_TECHMAP_WIREINIT_Q_), .IS_G_INVERTED(1'b1)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(1'b0)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule +module \$_DLATCH_P_ (input E, D, output Q); + parameter _TECHMAP_WIREINIT_Q_ = 1'bx; + generate if (_TECHMAP_WIREINIT_Q_ === 1'b1) + LDPE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .PRE(1'b0)); + else + LDCE #(.INIT(_TECHMAP_WIREINIT_Q_)) _TECHMAP_REPLACE_ (.D(D), .Q(Q), .G(E), .GE(1'b1), .CLR(1'b0)); + endgenerate + wire _TECHMAP_REMOVEINIT_Q_ = 1; +endmodule + +`endif + |