diff options
Diffstat (limited to 'tests/i2c_bench/wb_master_model.v')
| -rw-r--r-- | tests/i2c_bench/wb_master_model.v | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/tests/i2c_bench/wb_master_model.v b/tests/i2c_bench/wb_master_model.v deleted file mode 100644 index 65a9b7988..000000000 --- a/tests/i2c_bench/wb_master_model.v +++ /dev/null @@ -1,205 +0,0 @@ -/////////////////////////////////////////////////////////////////////// -//// //// -//// WISHBONE rev.B2 Wishbone Master model //// -//// //// -//// //// -//// Author: Richard Herveille //// -//// richard@asics.ws //// -//// www.asics.ws //// -//// //// -//// Downloaded from: http://www.opencores.org/projects/mem_ctrl //// -//// //// -/////////////////////////////////////////////////////////////////////// -//// //// -//// Copyright (C) 2001 Richard Herveille //// -//// richard@asics.ws //// -//// //// -//// This source file may be used and distributed without //// -//// restriction provided that this copyright statement is not //// -//// removed from the file and that any derivative work contains //// -//// the original copyright notice and the associated disclaimer. //// -//// //// -//// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// -//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// -//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// -//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// -//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// -//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// -//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// -//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// -//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// -//// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// -//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// -//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// -//// POSSIBILITY OF SUCH DAMAGE. //// -//// //// -/////////////////////////////////////////////////////////////////////// - -// CVS Log -// -// $Id: wb_master_model.v,v 1.4 2004-02-28 15:40:42 rherveille Exp $ -// -// $Date: 2004-02-28 15:40:42 $ -// $Revision: 1.4 $ -// $Author: rherveille $ -// $Locker: $ -// $State: Exp $ -// -// Change History: -// -`include "timescale.v" - -module wb_master_model(clk, rst, adr, din, dout, cyc, stb, we, sel, ack, err, rty); - -parameter dwidth = 32; -parameter awidth = 32; - -input clk, rst; -output [awidth -1:0] adr; -input [dwidth -1:0] din; -output [dwidth -1:0] dout; -output cyc, stb; -output we; -output [dwidth/8 -1:0] sel; -input ack, err, rty; - -//////////////////////////////////////////////////////////////////// -// -// Local Wires -// - -reg [awidth -1:0] adr; -reg [dwidth -1:0] dout; -reg cyc, stb; -reg we; -reg [dwidth/8 -1:0] sel; - -reg [dwidth -1:0] q; - -//////////////////////////////////////////////////////////////////// -// -// Memory Logic -// - -initial - begin - //adr = 32'hxxxx_xxxx; - //adr = 0; - adr = {awidth{1'bx}}; - dout = {dwidth{1'bx}}; - cyc = 1'b0; - stb = 1'bx; - we = 1'hx; - sel = {dwidth/8{1'bx}}; - #1; - $display("\nINFO: WISHBONE MASTER MODEL INSTANTIATED (%m)\n"); - end - -//////////////////////////////////////////////////////////////////// -// -// Wishbone write cycle -// - -task wb_write; - input delay; - integer delay; - - input [awidth -1:0] a; - input [dwidth -1:0] d; - - begin - - // wait initial delay - repeat(delay) @(posedge clk); - - // assert wishbone signal - #1; - adr = a; - dout = d; - cyc = 1'b1; - stb = 1'b1; - we = 1'b1; - sel = {dwidth/8{1'b1}}; - @(posedge clk); - - // wait for acknowledge from slave - while(~ack) @(posedge clk); - - // negate wishbone signals - #1; - cyc = 1'b0; - stb = 1'bx; - adr = {awidth{1'bx}}; - dout = {dwidth{1'bx}}; - we = 1'hx; - sel = {dwidth/8{1'bx}}; - - end -endtask - -//////////////////////////////////////////////////////////////////// -// -// Wishbone read cycle -// - -task wb_read; - input delay; - integer delay; - - input [awidth -1:0] a; - output [dwidth -1:0] d; - - begin - - // wait initial delay - repeat(delay) @(posedge clk); - - // assert wishbone signals - #1; - adr = a; - dout = {dwidth{1'bx}}; - cyc = 1'b1; - stb = 1'b1; - we = 1'b0; - sel = {dwidth/8{1'b1}}; - @(posedge clk); - - // wait for acknowledge from slave - while(~ack) @(posedge clk); - - // negate wishbone signals - #1; - cyc = 1'b0; - stb = 1'bx; - adr = {awidth{1'bx}}; - dout = {dwidth{1'bx}}; - we = 1'hx; - sel = {dwidth/8{1'bx}}; - d = din; - - end -endtask - -//////////////////////////////////////////////////////////////////// -// -// Wishbone compare cycle (read data from location and compare with expected data) -// - -task wb_cmp; - input delay; - integer delay; - - input [awidth -1:0] a; - input [dwidth -1:0] d_exp; - - begin - wb_read (delay, a, q); - - if (d_exp !== q) - $display("Data compare error. Received %h, expected %h at time %t", q, d_exp, $time); - end -endtask - -endmodule - - |