diff options
Diffstat (limited to 'tests/iwls2005/fpu/pre_norm.v')
-rw-r--r-- | tests/iwls2005/fpu/pre_norm.v | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/tests/iwls2005/fpu/pre_norm.v b/tests/iwls2005/fpu/pre_norm.v new file mode 100644 index 000000000..c54c71fa2 --- /dev/null +++ b/tests/iwls2005/fpu/pre_norm.v @@ -0,0 +1,270 @@ +///////////////////////////////////////////////////////////////////// +//// //// +//// Pre Normalize //// +//// Pre Normalization Unit for Add/Sub Operations //// +//// //// +//// Author: Rudolf Usselmann //// +//// rudi@asics.ws //// +//// //// +///////////////////////////////////////////////////////////////////// +//// //// +//// Copyright (C) 2000 Rudolf Usselmann //// +//// rudi@asics.ws //// +//// //// +//// This source file may be used and distributed without //// +//// restriction provided that this copyright statement is not //// +//// removed from the file and that any derivative work contains //// +//// the original copyright notice and the associated disclaimer.//// +//// //// +//// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// +//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// +//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// +//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// +//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// +//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// +//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// +//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// +//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// +//// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// +//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// +//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// +//// POSSIBILITY OF SUCH DAMAGE. //// +//// //// +///////////////////////////////////////////////////////////////////// + +`timescale 1ns / 100ps + + +module pre_norm(clk, rmode, add, opa, opb, opa_nan, opb_nan, fracta_out, + fractb_out, exp_dn_out, sign, nan_sign, result_zero_sign, + fasu_op); +input clk; +input [1:0] rmode; +input add; +input [31:0] opa, opb; +input opa_nan, opb_nan; +output [26:0] fracta_out, fractb_out; +output [7:0] exp_dn_out; +output sign; +output nan_sign, result_zero_sign; +output fasu_op; // Operation Output + +//////////////////////////////////////////////////////////////////////// +// +// Local Wires and registers +// + +wire signa, signb; // alias to opX sign +wire [7:0] expa, expb; // alias to opX exponent +wire [22:0] fracta, fractb; // alias to opX fraction +wire expa_lt_expb; // expa is larger than expb indicator +wire fractb_lt_fracta; // fractb is larger than fracta indicator +reg [7:0] exp_dn_out; // de normalized exponent output +wire [7:0] exp_small, exp_large; +wire [7:0] exp_diff; // Numeric difference of the two exponents +wire [22:0] adj_op; // Fraction adjustment: input +wire [26:0] adj_op_tmp; +wire [26:0] adj_op_out; // Fraction adjustment: output +wire [26:0] fracta_n, fractb_n; // Fraction selection after normalizing +wire [26:0] fracta_s, fractb_s; // Fraction Sorting out +reg [26:0] fracta_out, fractb_out; // Fraction Output +reg sign, sign_d; // Sign Output +reg add_d; // operation (add/sub) +reg fasu_op; // operation (add/sub) register +wire expa_dn, expb_dn; +reg sticky; +reg result_zero_sign; +reg add_r, signa_r, signb_r; +wire [4:0] exp_diff_sft; +wire exp_lt_27; +wire op_dn; +wire [26:0] adj_op_out_sft; +reg fracta_lt_fractb, fracta_eq_fractb; +wire nan_sign1; +reg nan_sign; + +//////////////////////////////////////////////////////////////////////// +// +// Aliases +// + +assign signa = opa[31]; +assign signb = opb[31]; +assign expa = opa[30:23]; +assign expb = opb[30:23]; +assign fracta = opa[22:0]; +assign fractb = opb[22:0]; + +//////////////////////////////////////////////////////////////////////// +// +// Pre-Normalize exponents (and fractions) +// + +assign expa_lt_expb = expa > expb; // expa is larger than expb + +// --------------------------------------------------------------------- +// Normalize + +assign expa_dn = !(|expa); // opa denormalized +assign expb_dn = !(|expb); // opb denormalized + +// --------------------------------------------------------------------- +// Calculate the difference between the smaller and larger exponent + +wire [7:0] exp_diff1, exp_diff1a, exp_diff2; + +assign exp_small = expa_lt_expb ? expb : expa; +assign exp_large = expa_lt_expb ? expa : expb; +assign exp_diff1 = exp_large - exp_small; +assign exp_diff1a = exp_diff1-1; +assign exp_diff2 = (expa_dn | expb_dn) ? exp_diff1a : exp_diff1; +assign exp_diff = (expa_dn & expb_dn) ? 8'h0 : exp_diff2; + +always @(posedge clk) // If numbers are equal we should return zero + exp_dn_out <= #1 (!add_d & expa==expb & fracta==fractb) ? 8'h0 : exp_large; + +// --------------------------------------------------------------------- +// Adjust the smaller fraction + + +assign op_dn = expa_lt_expb ? expb_dn : expa_dn; +assign adj_op = expa_lt_expb ? fractb : fracta; +assign adj_op_tmp = { ~op_dn, adj_op, 3'b0 }; // recover hidden bit (op_dn) + +// adj_op_out is 27 bits wide, so can only be shifted 27 bits to the right +assign exp_lt_27 = exp_diff > 8'd27; +assign exp_diff_sft = exp_lt_27 ? 5'd27 : exp_diff[4:0]; +assign adj_op_out_sft = adj_op_tmp >> exp_diff_sft; +assign adj_op_out = {adj_op_out_sft[26:1], adj_op_out_sft[0] | sticky }; + +// --------------------------------------------------------------------- +// Get truncated portion (sticky bit) + +always @(exp_diff_sft or adj_op_tmp) + case(exp_diff_sft) // synopsys full_case parallel_case + 00: sticky = 1'h0; + 01: sticky = adj_op_tmp[0]; + 02: sticky = |adj_op_tmp[01:0]; + 03: sticky = |adj_op_tmp[02:0]; + 04: sticky = |adj_op_tmp[03:0]; + 05: sticky = |adj_op_tmp[04:0]; + 06: sticky = |adj_op_tmp[05:0]; + 07: sticky = |adj_op_tmp[06:0]; + 08: sticky = |adj_op_tmp[07:0]; + 09: sticky = |adj_op_tmp[08:0]; + 10: sticky = |adj_op_tmp[09:0]; + 11: sticky = |adj_op_tmp[10:0]; + 12: sticky = |adj_op_tmp[11:0]; + 13: sticky = |adj_op_tmp[12:0]; + 14: sticky = |adj_op_tmp[13:0]; + 15: sticky = |adj_op_tmp[14:0]; + 16: sticky = |adj_op_tmp[15:0]; + 17: sticky = |adj_op_tmp[16:0]; + 18: sticky = |adj_op_tmp[17:0]; + 19: sticky = |adj_op_tmp[18:0]; + 20: sticky = |adj_op_tmp[19:0]; + 21: sticky = |adj_op_tmp[20:0]; + 22: sticky = |adj_op_tmp[21:0]; + 23: sticky = |adj_op_tmp[22:0]; + 24: sticky = |adj_op_tmp[23:0]; + 25: sticky = |adj_op_tmp[24:0]; + 26: sticky = |adj_op_tmp[25:0]; + 27: sticky = |adj_op_tmp[26:0]; + endcase + +// --------------------------------------------------------------------- +// Select operands for add/sub (recover hidden bit) + +assign fracta_n = expa_lt_expb ? {~expa_dn, fracta, 3'b0} : adj_op_out; +assign fractb_n = expa_lt_expb ? adj_op_out : {~expb_dn, fractb, 3'b0}; + +// --------------------------------------------------------------------- +// Sort operands (for sub only) + +assign fractb_lt_fracta = fractb_n > fracta_n; // fractb is larger than fracta +assign fracta_s = fractb_lt_fracta ? fractb_n : fracta_n; +assign fractb_s = fractb_lt_fracta ? fracta_n : fractb_n; + +always @(posedge clk) + fracta_out <= #1 fracta_s; + +always @(posedge clk) + fractb_out <= #1 fractb_s; + +// --------------------------------------------------------------------- +// Determine sign for the output + +// sign: 0=Positive Number; 1=Negative Number +always @(signa or signb or add or fractb_lt_fracta) + case({signa, signb, add}) // synopsys full_case parallel_case + + // Add + 3'b0_0_1: sign_d = 0; + 3'b0_1_1: sign_d = fractb_lt_fracta; + 3'b1_0_1: sign_d = !fractb_lt_fracta; + 3'b1_1_1: sign_d = 1; + + // Sub + 3'b0_0_0: sign_d = fractb_lt_fracta; + 3'b0_1_0: sign_d = 0; + 3'b1_0_0: sign_d = 1; + 3'b1_1_0: sign_d = !fractb_lt_fracta; + endcase + +always @(posedge clk) + sign <= #1 sign_d; + +// Fix sign for ZERO result +always @(posedge clk) + signa_r <= #1 signa; + +always @(posedge clk) + signb_r <= #1 signb; + +always @(posedge clk) + add_r <= #1 add; + +always @(posedge clk) + result_zero_sign <= #1 ( add_r & signa_r & signb_r) | + (!add_r & signa_r & !signb_r) | + ( add_r & (signa_r | signb_r) & (rmode==3)) | + (!add_r & (signa_r == signb_r) & (rmode==3)); + +// Fix sign for NAN result +always @(posedge clk) + fracta_lt_fractb <= #1 fracta < fractb; + +always @(posedge clk) + fracta_eq_fractb <= #1 fracta == fractb; + +assign nan_sign1 = fracta_eq_fractb ? (signa_r & signb_r) : fracta_lt_fractb ? signb_r : signa_r; + +always @(posedge clk) + nan_sign <= #1 (opa_nan & opb_nan) ? nan_sign1 : opb_nan ? signb_r : signa_r; + +//////////////////////////////////////////////////////////////////////// +// +// Decode Add/Sub operation +// + +// add: 1=Add; 0=Subtract +always @(signa or signb or add) + case({signa, signb, add}) // synopsys full_case parallel_case + + // Add + 3'b0_0_1: add_d = 1; + 3'b0_1_1: add_d = 0; + 3'b1_0_1: add_d = 0; + 3'b1_1_1: add_d = 1; + + // Sub + 3'b0_0_0: add_d = 0; + 3'b0_1_0: add_d = 1; + 3'b1_0_0: add_d = 1; + 3'b1_1_0: add_d = 0; + endcase + +always @(posedge clk) + fasu_op <= #1 add_d; + +endmodule |