/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @defgroup I2C I2C Driver
* @brief Generic I2C Driver.
* @details This module implements a generic I2C (Inter-Integrated Circuit)
* driver.
* @pre In order to use the I2C driver the @p HAL_USE_I2C option
* must be enabled in @p halconf.h.
*
* @section i2c_1 Driver State Machine
* The driver implements a state machine internally, not all the driver
* functionalities can be used in any moment, any transition not explicitly
* shown in the following diagram has to be considered an error and shall
* be captured by an assertion (if enabled).
* @if LATEX_PDF
* @dot
digraph example {
size="5, 7";
rankdir="LR";
node [shape=circle, fontname=Helvetica, fontsize=8, fixedsize="true",
width="0.9", height="0.9"];
edge [fontname=Helvetica, fontsize=8];
stop [label="I2C_STOP\nLow Power"];
uninit [label="I2C_UNINIT", style="bold"];
ready [label="I2C_READY\nClock Enabled"];
active_tx [label="I2C_ACTIVE_TX\nBus TX Active"];
active_rx [label="I2C_ACTIVE_RX\nBus RX Active"];
locked [label="I2C_LOCKED\nBus Locked"];
uninit -> stop [label="i2cInit()", constraint=false];
stop -> stop [label="i2cStop()"];
stop -> ready [label="i2cStart()"];
ready -> ready [label="i2cStart()"];
ready -> stop [label="i2cStop()"];
ready -> active_tx [label="i2cMasterTransmit()"];
ready -> active_rx [label="i2cMasterReceive()"];
active_tx -> ready [label="completed"];
active_rx -> ready [label="completed"];
active_tx -> locked [label="RDY_TIMEOUT"];
active_rx -> locked [label="RDY_TIMEOUT"];
locked -> stop [label="i2cStop()"];
locked -> ready [label="i2cStart()"];
}
* @else
* @dot
digraph example {
rankdir="LR";
node [shape=circle, fontname=Helvetica, fontsize=8, fixedsize="true",
width="0.9", height="0.9"];
edge [fontname=Helvetica, fontsize=8];
stop [label="I2C_STOP\nLow Power"];
uninit [label="I2C_UNINIT", style="bold"];
ready [label="I2C_READY\nClock Enabled"];
active_tx [label="I2C_ACTIVE_TX\nBus TX Active"];
active_rx [label="I2C_ACTIVE_RX\nBus RX Active"];
locked [label="I2C_LOCKED\nBus Locked"];
uninit -> stop [label="i2cInit()", constraint=false];
stop -> stop [label="i2cStop()"];
stop -> ready [label="i2cStart()"];
ready -> ready [label="i2cStart()"];
ready -> stop [label="i2cStop()"];
ready -> active_tx [label="i2cMasterTransmit()"];
ready -> active_rx [label="i2cMasterReceive()"];
active_tx -> ready [label="completed"];
active_rx -> ready [label="completed"];
active_tx -> locked [label="RDY_TIMEOUT"];
active_rx -> locked [label="RDY_TIMEOUT"];
locked -> stop [label="i2cStop()"];
locked -> ready [label="i2cStart()"];
}
* @enddot
* @endif
* The driver is not thread safe for performance reasons, if you need to access
* the I2C bus from multiple threads then use the @p i2cAcquireBus() and
* @p i2cReleaseBus() APIs in order to gain exclusive access.
*
* @ingroup HAL_NORMAL_DRIVERS
*/
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
/*
* yosys -- Yosys Open SYnthesis Suite
*
* Copyright (C) 2018 Icenowy Zheng <icenowy@aosc.io>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "kernel/yosys.h"
#include "kernel/sigtools.h"
USING_YOSYS_NAMESPACE
PRIVATE_NAMESPACE_BEGIN
struct DetermineInitPass : public Pass {
DetermineInitPass() : Pass("determine_init", "Determine the init value of cells") { }
void help() YS_OVERRIDE
{
log("\n");
log(" determine_init [selection]\n");
log("\n");
log("Determine the init value of cells that doesn't allow unknown init value.\n");
log("\n");
}
Const determine_init(Const init)
{
for (int i = 0; i < GetSize(init); i++) {
if (init[i] != State::S0 && init[i] != State::S1)
init[i] = State::S0;
}
return init;
}
void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
{
log_header(design, "Executing DETERMINE_INIT pass (determine init value for cells).\n");
extra_args(args, args.size(), design);
size_t cnt = 0;
for (auto module : design->selected_modules())
{
for (auto cell : module->selected_cells())
{
if (cell->type == "\\RAM16S4")
{
cell->setParam("\\INIT_0", determine_init(cell->getParam("\\INIT_0")));
cell->setParam("\\INIT_1", determine_init(cell->getParam("\\INIT_1")));
cell->setParam("\\INIT_2", determine_init(cell->getParam("\\INIT_2")));
cell->setParam("\\INIT_3", determine_init(cell->getParam("\\INIT_3")));
cnt++;
}
}
}
log_header(design, "Updated %lu cells with determined init value.\n", cnt);
}
} DetermineInitPass;
PRIVATE_NAMESPACE_END
|