diff options
author | root <root@artemis.panaceas.org> | 2015-12-25 04:40:36 +0000 |
---|---|---|
committer | root <root@artemis.panaceas.org> | 2015-12-25 04:40:36 +0000 |
commit | 849369d6c66d3054688672f97d31fceb8e8230fb (patch) | |
tree | 6135abc790ca67dedbe07c39806591e70eda81ce /arch/arm/mach-omap2/include/mach/entry-macro.S | |
download | linux-3.0.35-kobo-849369d6c66d3054688672f97d31fceb8e8230fb.tar.gz linux-3.0.35-kobo-849369d6c66d3054688672f97d31fceb8e8230fb.tar.bz2 linux-3.0.35-kobo-849369d6c66d3054688672f97d31fceb8e8230fb.zip |
initial_commit
Diffstat (limited to 'arch/arm/mach-omap2/include/mach/entry-macro.S')
-rw-r--r-- | arch/arm/mach-omap2/include/mach/entry-macro.S | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S new file mode 100644 index 00000000..a48690b9 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -0,0 +1,170 @@ +/* + * arch/arm/plat-omap/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for OMAP-based platforms + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <mach/hardware.h> +#include <mach/io.h> +#include <mach/irqs.h> +#include <asm/hardware/gic.h> + +#include <plat/omap24xx.h> +#include <plat/omap34xx.h> +#include <plat/omap44xx.h> + +#include <plat/multi.h> + +#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) +#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) +#define OMAP4_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */ +#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */ + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + +/* + * Unoptimized irq functions for multi-omap2, 3 and 4 + */ + +#ifdef MULTI_OMAP2 + /* + * Configure the interrupt base on the first interrupt. + * See also omap_irq_base_init for setting omap_irq_base. + */ + .macro get_irqnr_preamble, base, tmp + ldr \base, =omap_irq_base @ irq base address + ldr \base, [\base, #0] @ irq base value + .endm + + /* Check the pending interrupts. Note that base already set */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + tst \base, #0x100 @ gic address? + bne 4401f @ found gic + + /* Handle omap2 and omap3 */ + ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ + cmp \irqnr, #0x0 + bne 9998f + ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ + cmp \irqnr, #0x0 + bne 9998f + ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ + cmp \irqnr, #0x0 + bne 9998f + + /* + * ti816x has additional IRQ pending register. Checking this + * register on omap2 & omap3 has no effect (read as 0). + */ + ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */ + cmp \irqnr, #0x0 +9998: + ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] + and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ + b 9999f + + /* Handle omap4 */ +4401: ldr \irqstat, [\base, #GIC_CPU_INTACK] + ldr \tmp, =1021 + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr +9999: + .endm + +#ifdef CONFIG_SMP + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt + * on the controller, since this requires the original irqstat + * value which we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + it cc + strcc \irqstat, [\base, #GIC_CPU_EOI] + it cs + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + itt eq + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm +#endif /* CONFIG_SMP */ + +#else /* MULTI_OMAP2 */ + + +/* + * Optimized irq functions for omap2, 3 and 4 + */ + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + .macro get_irqnr_preamble, base, tmp +#ifdef CONFIG_ARCH_OMAP2 + ldr \base, =OMAP2_IRQ_BASE +#else + ldr \base, =OMAP3_IRQ_BASE +#endif + .endm + + /* Check the pending interrupts. Note that base already set */ + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ + cmp \irqnr, #0x0 + bne 9999f + ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ + cmp \irqnr, #0x0 + bne 9999f + ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ + cmp \irqnr, #0x0 +#ifdef CONFIG_SOC_OMAPTI816X + bne 9999f + ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */ + cmp \irqnr, #0x0 +#endif +9999: + ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] + and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ + + .endm +#endif + + +#ifdef CONFIG_ARCH_OMAP4 +#define HAVE_GET_IRQNR_PREAMBLE +#include <asm/hardware/entry-macro-gic.S> + + .macro get_irqnr_preamble, base, tmp + ldr \base, =OMAP4_IRQ_BASE + .endm + +#endif + +#endif /* MULTI_OMAP2 */ + + .macro irq_prio_table + .endm |