diff options
author | root <root@artemis.panaceas.org> | 2015-12-25 04:40:36 +0000 |
---|---|---|
committer | root <root@artemis.panaceas.org> | 2015-12-25 04:40:36 +0000 |
commit | 849369d6c66d3054688672f97d31fceb8e8230fb (patch) | |
tree | 6135abc790ca67dedbe07c39806591e70eda81ce /arch/arm/mach-omap2/usb-musb.c | |
download | linux-3.0.35-kobo-849369d6c66d3054688672f97d31fceb8e8230fb.tar.gz linux-3.0.35-kobo-849369d6c66d3054688672f97d31fceb8e8230fb.tar.bz2 linux-3.0.35-kobo-849369d6c66d3054688672f97d31fceb8e8230fb.zip |
initial_commit
Diffstat (limited to 'arch/arm/mach-omap2/usb-musb.c')
-rw-r--r-- | arch/arm/mach-omap2/usb-musb.c | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c new file mode 100644 index 00000000..c7ed540d --- /dev/null +++ b/arch/arm/mach-omap2/usb-musb.c @@ -0,0 +1,185 @@ +/* + * linux/arch/arm/mach-omap2/usb-musb.c + * + * This file will contain the board specific details for the + * MENTOR USB OTG controller on OMAP3430 + * + * Copyright (C) 2007-2008 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Author: Vikram Pandita + * + * Generalization by: + * Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> + +#include <linux/usb/musb.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/am35xx.h> +#include <plat/usb.h> +#include <plat/omap_device.h> +#include "mux.h" + +#if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X) + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#ifdef CONFIG_USB_MUSB_OTG + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + /* .clock is set dynamically */ + .config = &musb_config, + + /* REVISIT charge pump on TWL4030 can supply up to + * 100 mA ... but this value is board-specific, like + * "mode", and should be passed to usb_musb_init(). + */ + .power = 50, /* up to 100 mA */ +}; + +static u64 musb_dmamask = DMA_BIT_MASK(32); + +static struct omap_device_pm_latency omap_musb_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static void usb_musb_mux_init(struct omap_musb_board_data *board_data) +{ + switch (board_data->interface_type) { + case MUSB_INTERFACE_UTMI: + omap_mux_init_signal("usba0_otg_dp", OMAP_PIN_INPUT); + omap_mux_init_signal("usba0_otg_dm", OMAP_PIN_INPUT); + break; + case MUSB_INTERFACE_ULPI: + omap_mux_init_signal("usba0_ulpiphy_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_stp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usba0_ulpiphy_dat7", + OMAP_PIN_INPUT_PULLDOWN); + break; + default: + break; + } +} + +static struct omap_musb_board_data musb_default_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) +{ + struct omap_hwmod *oh; + struct omap_device *od; + struct platform_device *pdev; + struct device *dev; + int bus_id = -1; + const char *oh_name, *name; + struct omap_musb_board_data *board_data; + + if (musb_board_data) + board_data = musb_board_data; + else + board_data = &musb_default_board_data; + + /* + * REVISIT: This line can be removed once all the platforms using + * musb_core.c have been converted to use use clkdev. + */ + musb_plat.clock = "ick"; + musb_plat.board_data = board_data; + musb_plat.power = board_data->power >> 1; + musb_plat.mode = board_data->mode; + musb_plat.extvbus = board_data->extvbus; + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); + + if (cpu_is_omap3517() || cpu_is_omap3505()) { + oh_name = "am35x_otg_hs"; + name = "musb-am35x"; + } else { + oh_name = "usb_otg_hs"; + name = "musb-omap2430"; + } + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return; + } + + od = omap_device_build(name, bus_id, oh, &musb_plat, + sizeof(musb_plat), omap_musb_latency, + ARRAY_SIZE(omap_musb_latency), false); + if (IS_ERR(od)) { + pr_err("Could not build omap_device for %s %s\n", + name, oh_name); + return; + } + + pdev = &od->pdev; + dev = &pdev->dev; + get_device(dev); + dev->dma_mask = &musb_dmamask; + dev->coherent_dma_mask = musb_dmamask; + put_device(dev); + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); +} + +#else +void __init usb_musb_init(struct omap_musb_board_data *board_data) +{ + if (cpu_is_omap44xx()) + omap4430_phy_init(NULL); +} +#endif /* CONFIG_USB_MUSB_SOC */ |