initial_commit

1 files changed, 998 insertions, 0 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
new file mode 100644
index 00000000..2729c666
--- /dev/null
+++ b/arch/powerpc/Kconfig
@@ -0,0 +1,998 @@
+source "arch/powerpc/platforms/Kconfig.cputype"
+
+config PPC32
+	bool
+	default y if !PPC64
+
+config 32BIT
+	bool
+	default y if PPC32
+
+config 64BIT
+	bool
+	default y if PPC64
+
+config WORD_SIZE
+	int
+	default 64 if PPC64
+	default 32 if !PPC64
+
+config ARCH_PHYS_ADDR_T_64BIT
+       def_bool PPC64 || PHYS_64BIT
+
+config ARCH_DMA_ADDR_T_64BIT
+	def_bool ARCH_PHYS_ADDR_T_64BIT
+
+config MMU
+	bool
+	default y
+
+config GENERIC_CMOS_UPDATE
+	def_bool y
+
+config GENERIC_TIME_VSYSCALL
+	def_bool y
+
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
+config HAVE_SETUP_PER_CPU_AREA
+	def_bool PPC64
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool PPC64
+
+config NR_IRQS
+	int "Number of virtual interrupt numbers"
+	range 32 32768
+	default "512"
+	help
+	  This defines the number of virtual interrupt numbers the kernel
+	  can manage. Virtual interrupt numbers are what you see in
+	  /proc/interrupts. If you configure your system to have too few,
+	  drivers will fail to load or worse - handle with care.
+
+config STACKTRACE_SUPPORT
+	bool
+	default y
+
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	default y
+
+config GENERIC_LOCKBREAK
+	bool
+	default y
+	depends on SMP && PREEMPT
+
+config ARCH_HAS_ILOG2_U32
+	bool
+	default y
+
+config ARCH_HAS_ILOG2_U64
+	bool
+	default y if 64BIT
+
+config GENERIC_HWEIGHT
+	bool
+	default y
+
+config GENERIC_GPIO
+	bool
+	help
+	  Generic GPIO API support
+
+config ARCH_NO_VIRT_TO_BUS
+	def_bool PPC64
+
+config PPC
+	bool
+	default y
+	select OF
+	select OF_EARLY_FLATTREE
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_IDE
+	select HAVE_IOREMAP_PROT
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select HAVE_KPROBES
+	select HAVE_ARCH_KGDB
+	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_MEMBLOCK
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
+	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_OPROFILE
+	select HAVE_SYSCALL_WRAPPERS if PPC64
+	select GENERIC_ATOMIC64 if PPC32
+	select HAVE_IRQ_WORK
+	select HAVE_PERF_EVENTS
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_SPARSE_IRQ
+	select IRQ_PER_CPU
+	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_SHOW_LEVEL
+	select HAVE_RCU_TABLE_FREE if SMP
+	select HAVE_SYSCALL_TRACEPOINTS
+
+config EARLY_PRINTK
+	bool
+	default y
+
+config COMPAT
+	bool
+	default y if PPC64
+	select COMPAT_BINFMT_ELF
+
+config SYSVIPC_COMPAT
+	bool
+	depends on COMPAT && SYSVIPC
+	default y
+
+# All PPC32s use generic nvram driver through ppc_md
+config GENERIC_NVRAM
+	bool
+	default y if PPC32
+
+config SCHED_OMIT_FRAME_POINTER
+	bool
+	default y
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+	default !PPC_PSERIES || PCI
+
+config PPC_OF
+	def_bool y
+
+config PPC_UDBG_16550
+	bool
+	default n
+
+config GENERIC_TBSYNC
+	bool
+	default y if PPC32 && SMP
+	default n
+
+config AUDIT_ARCH
+	bool
+	default y
+
+config GENERIC_BUG
+	bool
+	default y
+	depends on BUG
+
+config SYS_SUPPORTS_APM_EMULATION
+	default y if PMAC_APM_EMU
+	bool
+
+config EPAPR_BOOT
+	bool
+	help
+	  Used to allow a board to specify it wants an ePAPR compliant wrapper.
+	default n
+
+config DEFAULT_UIMAGE
+	bool
+	help
+	  Used to allow a board to specify it wants a uImage built by default
+	default n
+
+config REDBOOT
+	bool
+
+config ARCH_HIBERNATION_POSSIBLE
+	bool
+	default y
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
+		   (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
+
+config PPC_DCR_NATIVE
+	bool
+	default n
+
+config PPC_DCR_MMIO
+	bool
+	default n
+
+config PPC_DCR
+	bool
+	depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
+	default y
+
+config PPC_OF_PLATFORM_PCI
+	bool
+	depends on PCI
+	depends on PPC64 # not supported on 32 bits yet
+	default n
+
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	def_bool y
+
+config PPC_ADV_DEBUG_REGS
+	bool
+	depends on 40x || BOOKE
+	default y
+
+config PPC_ADV_DEBUG_IACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 4 if 44x
+	default 2
+
+config PPC_ADV_DEBUG_DACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2
+
+config PPC_ADV_DEBUG_DVCS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2 if 44x
+	default 0
+
+config PPC_ADV_DEBUG_DAC_RANGE
+	bool
+	depends on PPC_ADV_DEBUG_REGS && 44x
+	default y
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "arch/powerpc/sysdev/Kconfig"
+source "arch/powerpc/platforms/Kconfig"
+
+menu "Kernel options"
+
+config HIGHMEM
+	bool "High memory support"
+	depends on PPC32
+
+source kernel/time/Kconfig
+source kernel/Kconfig.hz
+source kernel/Kconfig.preempt
+source "fs/Kconfig.binfmt"
+
+config HUGETLB_PAGE_SIZE_VARIABLE
+	bool
+	depends on HUGETLB_PAGE
+	default y
+
+config MATH_EMULATION
+	bool "Math emulation"
+	depends on 4xx || 8xx || E200 || PPC_MPC832x || E500
+	---help---
+	  Some PowerPC chips designed for embedded applications do not have
+	  a floating-point unit and therefore do not implement the
+	  floating-point instructions in the PowerPC instruction set.  If you
+	  say Y here, the kernel will include code to emulate a floating-point
+	  unit, which will allow programs that use floating-point
+	  instructions to run.
+
+config 8XX_MINIMAL_FPEMU
+	bool "Minimal math emulation for 8xx"
+	depends on 8xx && !MATH_EMULATION
+	help
+	  Older arch/ppc kernels still emulated a few floating point
+	  instructions such as load and store, even when full math
+	  emulation is disabled.  Say "Y" here if you want to preserve
+	  this behavior.
+
+	  It is recommended that you build a soft-float userspace instead.
+
+config IOMMU_HELPER
+	def_bool PPC64
+
+config SWIOTLB
+	bool "SWIOTLB support"
+	default n
+	select IOMMU_HELPER
+	---help---
+	  Support for IO bounce buffering for systems without an IOMMU.
+	  This allows us to DMA to the full physical address space on
+	  platforms where the size of a physical address is larger
+	  than the bus address.  Not all platforms support this.
+
+config HOTPLUG_CPU
+	bool "Support for enabling/disabling CPUs"
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+	---help---
+	  Say Y here to be able to disable and re-enable individual
+	  CPUs at runtime on SMP machines.
+
+	  Say N if you are unsure.
+
+config ARCH_CPU_PROBE_RELEASE
+	def_bool y
+	depends on HOTPLUG_CPU
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+	def_bool y
+
+config ARCH_HAS_WALK_MEMORY
+	def_bool y
+
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
+config KEXEC
+	bool "kexec system call (EXPERIMENTAL)"
+	depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is independent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  The name comes from the similarity to the exec system call.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  It may help to enable device hotplugging
+	  support.  As of this writing the exact hardware interface is
+	  strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+	bool "Build a kdump crash kernel"
+	depends on PPC64 || 6xx || FSL_BOOKE
+	select RELOCATABLE if PPC64 || FSL_BOOKE
+	help
+	  Build a kernel suitable for use as a kdump capture kernel.
+	  The same kernel binary can be used as production kernel and dump
+	  capture kernel.
+
+config PHYP_DUMP
+	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
+	depends on PPC_PSERIES && EXPERIMENTAL
+	help
+	  Hypervisor-assisted dump is meant to be a kdump replacement
+	  offering robustness and speed not possible without system
+	  hypervisor assistance.
+
+	  If unsure, say "N"
+
+config PPCBUG_NVRAM
+	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
+	default y if PPC_PREP
+
+config IRQ_ALL_CPUS
+	bool "Distribute interrupts on all CPUs by default"
+	depends on SMP && !MV64360
+	help
+	  This option gives the kernel permission to distribute IRQs across
+	  multiple CPUs.  Saying N here will route all IRQs to the first
+	  CPU.  Generally saying Y is safe, although some problems have been
+	  reported with SMP Power Macintoshes with this option enabled.
+
+config NUMA
+	bool "NUMA support"
+	depends on PPC64
+	default y if SMP && PPC_PSERIES
+
+config NODES_SHIFT
+	int
+	default "8" if PPC64
+	default "4"
+	depends on NEED_MULTIPLE_NODES
+
+config MAX_ACTIVE_REGIONS
+	int
+	default "256" if PPC64
+	default "32"
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+	depends on PPC64
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+	depends on (PPC64 && !NUMA) || PPC32
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	depends on PPC64
+	select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+	depends on (SMP && PPC_PSERIES) || PPC_PS3
+
+config ARCH_POPULATES_NODE_MAP
+	def_bool y
+
+config SYS_SUPPORTS_HUGETLBFS
+       def_bool y
+       depends on PPC_BOOK3S_64
+
+source "mm/Kconfig"
+
+config ARCH_MEMORY_PROBE
+	def_bool y
+	depends on MEMORY_HOTPLUG
+
+# Some NUMA nodes have memory ranges that span
+# other nodes.  Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node.  See memmap_init_zone()
+# for details.
+config NODES_SPAN_OTHER_NODES
+	def_bool y
+	depends on NEED_MULTIPLE_NODES
+
+config PPC_HAS_HASH_64K
+	bool
+	depends on PPC64
+	default n
+
+config STDBINUTILS
+	bool "Using standard binutils settings"
+	depends on 44x
+	default y
+	help
+	  Turning this option off allows you to select 256KB PAGE_SIZE on 44x.
+	  Note, that kernel will be able to run only those applications,
+	  which had been compiled using binutils later than 2.17.50.0.3 with
+	  '-zmax-page-size' set to 256K (the default is 64K). Or, if using
+	  the older binutils, you can patch them with a trivial patch, which
+	  changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000.
+
+choice
+	prompt "Page size"
+	default PPC_4K_PAGES
+	help
+	  Select the kernel logical page size. Increasing the page size
+	  will reduce software overhead at each page boundary, allow
+	  hardware prefetch mechanisms to be more effective, and allow
+	  larger dma transfers increasing IO efficiency and reducing
+	  overhead. However the utilization of memory will increase.
+	  For example, each cached file will using a multiple of the
+	  page size to hold its contents and the difference between the
+	  end of file and the end of page is wasted.
+
+	  Some dedicated systems, such as software raid serving with
+	  accelerated calculations, have shown significant increases.
+
+	  If you configure a 64 bit kernel for 64k pages but the
+	  processor does not support them, then the kernel will simulate
+	  them with 4k pages, loading them on demand, but with the
+	  reduced software overhead and larger internal fragmentation.
+	  For the 32 bit kernel, a large page option will not be offered
+	  unless it is supported by the configured processor.
+
+	  If unsure, choose 4K_PAGES.
+
+config PPC_4K_PAGES
+	bool "4k page size"
+
+config PPC_16K_PAGES
+	bool "16k page size" if 44x
+
+config PPC_64K_PAGES
+	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
+	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
+
+config PPC_256K_PAGES
+	bool "256k page size" if 44x
+	depends on !STDBINUTILS
+	help
+	  Make the page size 256k.
+
+	  As the ELF standard only requires alignment to support page
+	  sizes up to 64k, you will need to compile all of your user
+	  space applications with a non-standard binutils settings
+	  (see the STDBINUTILS description for details).
+
+	  Say N unless you know what you are doing.
+
+endchoice
+
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	range 9 64 if PPC64 && PPC_64K_PAGES
+	default "9" if PPC64 && PPC_64K_PAGES
+	range 13 64 if PPC64 && !PPC_64K_PAGES
+	default "13" if PPC64 && !PPC_64K_PAGES
+	range 9 64 if PPC32 && PPC_16K_PAGES
+	default "9" if PPC32 && PPC_16K_PAGES
+	range 7 64 if PPC32 && PPC_64K_PAGES
+	default "7" if PPC32 && PPC_64K_PAGES
+	range 5 64 if PPC32 && PPC_256K_PAGES
+	default "5" if PPC32 && PPC_256K_PAGES
+	range 11 64
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB.  For example, on 64-bit
+	  systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES.  Keep
+	  this in mind when choosing a value for this option.
+
+config PPC_SUBPAGE_PROT
+	bool "Support setting protections for 4k subpages"
+	depends on PPC_STD_MMU_64 && PPC_64K_PAGES
+	help
+	  This option adds support for a system call to allow user programs
+	  to set access permissions (read/write, readonly, or no access)
+	  on the 4k subpages of each 64k page.
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on PPC64 && SMP
+	help
+	  SMT scheduler support improves the CPU scheduler's decision making
+	  when dealing with POWER5 cpus at a cost of slightly increased
+	  overhead in some places. If unsure say N here.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
+	help
+	  On some platforms, there is currently no way for the boot loader to
+	  pass arguments to the kernel. For these platforms, you can supply
+	  some command-line options at build time by entering them here.  In
+	  most cases you will need to specify the root device here.
+
+config EXTRA_TARGETS
+	string "Additional default image types"
+	help
+	  List additional targets to be built by the bootwrapper here (separated
+	  by spaces).  This is useful for targets that depend of device tree
+	  files in the .dts directory.
+
+	  Targets in this list will be build as part of the default build
+	  target, or when the user does a 'make zImage' or a
+	  'make zImage.initrd'.
+
+	  If unsure, leave blank
+
+config ARCH_WANTS_FREEZER_CONTROL
+	def_bool y
+	depends on ADB_PMU
+
+source kernel/power/Kconfig
+
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y. Only embedded should say N here.
+
+endmenu
+
+config ISA_DMA_API
+	bool
+	default !PPC_ISERIES || PCI
+
+menu "Bus options"
+
+config ISA
+	bool "Support for ISA-bus hardware"
+	depends on PPC_PREP || PPC_CHRP
+	select PPC_I8259
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  If you have an Apple machine, say N here; if you
+	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
+	  you have an embedded board, consult your board documentation.
+
+config ZONE_DMA
+	bool
+	default y
+
+config NEED_DMA_MAP_STATE
+	def_bool (PPC64 || NOT_COHERENT_CACHE)
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
+config GENERIC_ISA_DMA
+	bool
+	depends on ISA_DMA_API
+	default y
+
+config PPC_INDIRECT_PCI
+	bool
+	depends on PCI
+	default y if 40x || 44x
+	default n
+
+config EISA
+	bool
+
+config SBUS
+	bool
+
+config FSL_SOC
+	bool
+
+config FSL_PCI
+ 	bool
+	select PPC_INDIRECT_PCI
+	select PCI_QUIRKS
+
+config FSL_PMC
+	bool
+	default y
+	depends on SUSPEND && (PPC_85xx || PPC_86xx)
+	help
+	  Freescale MPC85xx/MPC86xx power management controller support
+	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
+
+config PPC4xx_CPM
+	bool
+	default y
+	depends on SUSPEND && (44x || 40x)
+	help
+	  PPC4xx Clock Power Management (CPM) support (suspend/resume).
+	  It also enables support for two different idle states (idle-wait
+	  and idle-doze).
+
+config 4xx_SOC
+	bool
+
+config FSL_LBC
+	bool "Freescale Local Bus support"
+	depends on FSL_SOC
+	help
+	  Enables reporting of errors from the Freescale local bus
+	  controller.  Also contains some common code used by
+	  drivers for specific local bus peripherals.
+
+config FSL_GTM
+	bool
+	depends on PPC_83xx || QUICC_ENGINE || CPM2
+	help
+	  Freescale General-purpose Timers support
+
+# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
+config MCA
+	bool
+
+# Platforms that what PCI turned unconditionally just do select PCI
+# in their config node.  Platforms that want to choose at config
+# time should select PPC_PCI_CHOICE
+config PPC_PCI_CHOICE
+	bool
+
+config PCI
+	bool "PCI support" if PPC_PCI_CHOICE
+	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
+		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
+	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
+	default PCI_QSPAN if !4xx && !CPM2 && 8xx
+	select ARCH_SUPPORTS_MSI
+	help
+	  Find out whether your system includes a PCI bus. PCI is the name of
+	  a bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box.  If you say Y here, the kernel will include drivers and
+	  infrastructure code to support PCI bus devices.
+
+config PCI_DOMAINS
+	def_bool PCI
+
+config PCI_SYSCALL
+	def_bool PCI
+
+config PCI_QSPAN
+	bool "QSpan PCI"
+	depends on !4xx && !CPM2 && 8xx
+	select PPC_I8259
+	help
+	  Say Y here if you have a system based on a Motorola 8xx-series
+	  embedded processor with a QSPAN PCI interface, otherwise say N.
+
+config PCI_8260
+	bool
+	depends on PCI && 8260
+	select PPC_INDIRECT_PCI
+	default y
+
+config 8260_PCI9
+	bool "Enable workaround for MPC826x erratum PCI 9"
+	depends on PCI_8260 && !8272
+	default y
+
+choice
+	prompt "IDMA channel for PCI 9 workaround"
+	depends on 8260_PCI9
+
+config 8260_PCI9_IDMA1
+	bool "IDMA1"
+
+config 8260_PCI9_IDMA2
+	bool "IDMA2"
+
+config 8260_PCI9_IDMA3
+	bool "IDMA3"
+
+config 8260_PCI9_IDMA4
+	bool "IDMA4"
+
+endchoice
+
+source "drivers/pci/pcie/Kconfig"
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+config HAS_RAPIDIO
+	bool
+	default n
+
+config RAPIDIO
+	bool "RapidIO support"
+	depends on HAS_RAPIDIO || PCI
+	help
+	  If you say Y here, the kernel will include drivers and
+	  infrastructure code to support RapidIO interconnect devices.
+
+config FSL_RIO
+	bool "Freescale Embedded SRIO Controller support"
+	depends on RAPIDIO && HAS_RAPIDIO
+	default "n"
+	---help---
+	  Include support for RapidIO controller on Freescale embedded
+	  processors (MPC8548, MPC8641, etc).
+
+source "drivers/rapidio/Kconfig"
+
+endmenu
+
+menu "Advanced setup"
+	depends on PPC32
+
+config ADVANCED_OPTIONS
+	bool "Prompt for advanced kernel configuration options"
+	help
+	  This option will enable prompting for a variety of advanced kernel
+	  configuration options.  These options can cause the kernel to not
+	  work if they are set incorrectly, but can be used to optimize certain
+	  aspects of kernel memory management.
+
+	  Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+	depends on !ADVANCED_OPTIONS
+
+config LOWMEM_SIZE_BOOL
+	bool "Set maximum low memory"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the maximum amount of memory which
+	  will be used as "low memory", that is, memory which the kernel can
+	  access directly, without having to set up a kernel virtual mapping.
+	  This can be useful in optimizing the layout of kernel virtual
+	  memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+	default "0x30000000"
+
+config LOWMEM_CAM_NUM_BOOL
+	bool "Set number of CAMs to use to map low memory"
+	depends on ADVANCED_OPTIONS && FSL_BOOKE
+	help
+	  This option allows you to set the maximum number of CAM slots that
+	  will be used to map low memory.  There are a limited number of slots
+	  available and even more limited number that will fit in the L1 MMU.
+	  However, using more entries will allow mapping more low memory.  This
+	  can be useful in optimizing the layout of kernel virtual memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_CAM_NUM
+	depends on FSL_BOOKE
+	int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
+	default 3
+
+config RELOCATABLE
+	bool "Build a relocatable kernel (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
+	help
+	  This builds a kernel image that is capable of running at the
+	  location the kernel is loaded at (some alignment restrictions may
+	  exist).
+
+	  One use is for the kexec on panic case where the recovery kernel
+	  must live at a different physical address than the primary
+	  kernel.
+
+	  Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
+	  it has been loaded at and the compile time physical addresses
+	  CONFIG_PHYSICAL_START is ignored.  However CONFIG_PHYSICAL_START
+	  setting can still be useful to bootwrappers that need to know the
+	  load location of the kernel (eg. u-boot/mkimage).
+
+config PAGE_OFFSET_BOOL
+	bool "Set custom page offset address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will map low memory.  This can be useful in optimizing
+	  the virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config PAGE_OFFSET
+	hex "Virtual address of memory base" if PAGE_OFFSET_BOOL
+	default "0xc0000000"
+
+config KERNEL_START_BOOL
+	bool "Set custom kernel base address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will be loaded.  Normally this should match PAGE_OFFSET
+	  however there are times (like kdump) that one might not want them
+	  to be the same.
+
+	  Say N here unless you know what you are doing.
+
+config KERNEL_START
+	hex "Virtual address of kernel base" if KERNEL_START_BOOL
+	default PAGE_OFFSET if PAGE_OFFSET_BOOL
+	default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
+	default "0xc0000000"
+
+config PHYSICAL_START_BOOL
+	bool "Set physical address where the kernel is loaded"
+	depends on ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
+	help
+	  This gives the physical address where the kernel is loaded.
+
+	  Say N here unless you know what you are doing.
+
+config PHYSICAL_START
+	hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
+	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
+	default "0x00000000"
+
+config PHYSICAL_ALIGN
+	hex
+	default "0x04000000" if FSL_BOOKE
+	help
+	  This value puts the alignment restrictions on physical address
+	  where kernel is loaded and run from. Kernel is compiled for an
+	  address which meets above alignment restriction.
+
+config TASK_SIZE_BOOL
+	bool "Set custom user task size"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the amount of virtual address space
+	  allocated to user tasks.  This can be useful in optimizing the
+	  virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config TASK_SIZE
+	hex "Size of user task space" if TASK_SIZE_BOOL
+	default "0x80000000" if PPC_PREP || PPC_8xx
+	default "0xc0000000"
+
+config CONSISTENT_SIZE_BOOL
+	bool "Set custom consistent memory pool size"
+	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+	help
+	  This option allows you to set the size of the
+	  consistent memory pool.  This pool of virtual memory
+	  is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+	default "0x00200000" if NOT_COHERENT_CACHE
+
+config PIN_TLB
+	bool "Pinned Kernel TLBs (860 ONLY)"
+	depends on ADVANCED_OPTIONS && 8xx
+endmenu
+
+if PPC64
+config RELOCATABLE
+	bool "Build a relocatable kernel"
+	help
+	  This builds a kernel image that is capable of running anywhere
+	  in the RMA (real memory area) at any 16k-aligned base address.
+	  The kernel is linked as a position-independent executable (PIE)
+	  and contains dynamic relocations which are processed early
+	  in the bootup process.
+
+	  One use is for the kexec on panic case where the recovery kernel
+	  must live at a different physical address than the primary
+	  kernel.
+
+config PAGE_OFFSET
+	hex
+	default "0xc000000000000000"
+config KERNEL_START
+	hex
+	default "0xc000000000000000"
+config PHYSICAL_START
+	hex
+	default "0x00000000"
+endif
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/powerpc/sysdev/qe_lib/Kconfig"
+
+source "lib/Kconfig"
+
+source "arch/powerpc/Kconfig.debug"
+
+source "security/Kconfig"
+
+config KEYS_COMPAT
+	bool
+	depends on COMPAT && KEYS
+	default y
+
+source "crypto/Kconfig"
+
+config PPC_CLOCK
+	bool
+	default n
+	select HAVE_CLK
+
+config PPC_LIB_RHEAP
+	bool
+
+source "arch/powerpc/kvm/Kconfig"